Texting to more than one recipient?

Hi all,
Is the Palm Pre not capable of sending a text message to more than one recipient? I just tried this, and my message just disappeared after I hit "send" and never went out.
Thanks,
- Steve
Post relates to: Pre p100eww (Sprint)

Have you repeated your inability to send to multiple people, or is it possible this was a one time error where you pushed the wrong button or accidentally did a back gesture?
I frequently text to more than one recipient without issues. The only thing I can't figure out is, how to add a recipient when replying to an existing text. In other words, when I start new, I can type in the names of as many recipients as I want (typically my wife and two kids) and it works fine. But when my son sends me a text and I want to send him a reply but add my wife as a recipient, I can't do that.
Message Edited by ponyfool on 09-20-2009 12:41 AM

Similar Messages

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Register more than one recipient in SM36 Recipient Determination

Dear all
Is it possible to register more than one recipient in SM36?
I want to send the function report by backgroud job and send the report to multi-parters automatically.
Now I have to use third party mail address as a transfer and config the route in external mail exchange to carry out such case.
thanks a lot.
Slam

Hi,
You can create a distribution list in the transaction SO23...Then use that distribution list in the spool recipient..
In the distribution list you can give multiple email addresses..
Thanks,
Naren

When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
"How do I text message multiple people at once?"
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
You can ask Apple for iPhone changes via this link:
http://www.apple.com/feedback/iphone.html
Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
(If this has answered your question, please mark your original post as answered)

Find texts with more than one Character Style applied

Hi,
If you need to find - and replace/restyle - texts where more than one Character Style is applied - here is tool for you - for ID CS3 and ID CS4:
http://www.adobescripts.com/search.php?query=multi+findreplace+grep&action=results
You can define options for up to 8 characters - by using GREP expressions.
Script is only for PC platform.
robin
www.adobescripts.com

Never tried with bullets but nested styles might work... I think you can chain two or more nested style, and then you can define first nested style to effect only first character, second nested style to next character and so on....

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once.

I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once. Can you please help?

Restart your Mac. See if that makes a difference.

TS2755 I have a new iPhone 5 from T-Mobile. I can send simple texts just fine. However, I have to turn off wi-if and enabler cellular to send texts to more than one person or to attach a picture. Is there a way around this?

I have a new iPhone 5 from T-Mobile. I can send simple texts just fine. However, I have to turn off wi-if and enabler cellular to send texts to more than one person or to attach a picture. Is there a way around this?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Unity Connection - sending email to more than one recipient

Hello.
I would like to know how can I send voicemail message via email to more than one recipient.
It works for me with one recipient (Smart Host + Accept and Relay Message in User Message Actions, but in relay address I can only use one email address).
Thanks in advance

A mailbox in Unity Connection is intended - and licensed - for a single user. It was not intended to allow for multiple receiptient distribution. If you want that functionality you could create each user a mailbox, add a distribution list with the mailboxes as members, and a call handler to address message to the DL instead of an individual mailbox the messages out.
Short of that you would need to have the SMTP smart host forward the message to multiple people (i.e. an email distribution list)
Please remember to rate helpful responses and identify helpful or correct answers.

Error message - Cannot print to more than one recipient

Let's face it, the email addresses allocated to our printers aren't exactly memorable. My solution was to set up a Gmail account with a memorable address and use the 'Forwarding' feature to redirect eprint requests to my printer. It is not working and I get an error message saying that I cannot send a print request to more than one recipient.
The forwarding option on Gmail only has one email address in it, my eprint addy, so I'm stuck now as to what to do next.
Can anyone solve this problem please or offer another alternative solution?
Many thanks.
This question was solved.
View Solution.

I believe when ePrint server has received the email, it made the necessary settings and configured the job for printing and then it went for "Reply All" option. So here it cannot send the print job to your personal email ID and the error came up.
The only option I can think of is add the printer email ID to your email contact list and give it a name like MyPrinter so you can remember easily , just like email contacts are added in Outlook.
Mark this post as answered so that others can find it useful.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

ALE distribution model - one message type to more than one recipient

Hello colleagues,
currently I'm working on an integration project between one SAP system and an e-shop system. The communication is established through IDOCs ( both inbound and outbound ). There is another system ( POS ) which is already integrated
with SAP via IDOCs also.
   Now I'm facing the following problem regarding distribution of transactional IDOCs ( orders, deliveries, etc. ): when assigning one message type ( for example DESADV - Delivery: Shipping notification ) to more than one external system in ALE distribution model I receive a message alerting that one message type can be send to only one recipient.
The distribution model is as follows:
Model Views
   SAP to POS
      SAPDEV ( the SAP system )
         POS ( the external POS system )
            DESADV
   SAP to E-SHOP
      SAPDEV ( the SAP system )
         E-SHOP ( the external e-shop system )
            DESADV
   Well, the system message is clear and I did the obvious: create a complete copy to the original message type and than assign it to the E-SHOP system ( the original message type is already used in integration between SAP and POS ).
As you can see I have found a workaround already but I think that it comes natural to SAP to communicate with other systems and to exchange same kind of documents to those systems and I can't believe that there isn't a standard solution for situation like this.
FYI I'm working on SAP ECC 6.0
Thanks in advance.
Wish you nice day and successful week ,
Vladimir

I believe when ePrint server has received the email, it made the necessary settings and configured the job for printing and then it went for "Reply All" option. So here it cannot send the print job to your personal email ID and the error came up.
The only option I can think of is add the printer email ID to your email contact list and give it a name like MyPrinter so you can remember easily , just like email contacts are added in Outlook.
Mark this post as answered so that others can find it useful.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

TS4268 how do I stop sending texts to more than one person through icloud?

How do I turn off icloud? when I send a text to my husband it goes to home icloud?

I'm not exactly sure what the issue is, but you are either syncing texts through iCloud because you may be sharing an account (you can just slide the button off under settings>icloud) or you have more than one thing checked under settings>message when you tap on start conversation as...
Make sure you only have one thing selected, your apple id or your phone number. Try to avoid having that iCloud account checked there.

Will not send text to more than one person

All of a sudden my phone will not send text message if it is going to more than one person. Plus it would not send a video that I received in a text message. In the past I could send a text message to more than one person and could send videos. Any ideas?

Are you retaining copies of sent texts? My coworker had over 500 messages
in a sent text folder.
Geoff
Private info removed as required by the Terms of Service.
Message was edited by: Admin Moderator

Texting to more than one person

Is there a way to send 1 text to more than 1 person?
At present I cannot find a way to send the same message to more than 1 person.
Also the you cannot forward a text you receive.
These are 2 huge oversights, apart from these issues I love my iPhone.

In addition to what 'roaminggnome' said, here is a list that will help you.....
Alltel [email protected]
AT&T/Cingular (MMS) [email protected]
AT&T/Cingular (SMS) [email protected]
Cingular [email protected]
Boost Mobile [email protected]
Nextel [email protected]
Sprint PCS [email protected]
Sprint PCS - Short Mail (Whatever short mail means?) [email protected]
T-Mobile USA [email protected]
T-Mobile UK [email protected]
T-Mobile Germany [email protected]
US Cellular [email protected]
Verizon Wireless (MMS) [email protected]
Verizon Wireless (SMS) [email protected]
Virgin Mobile [email protected]
**In place of the x's, you would enter the persons 10 digit mobile #

I cannot see more than one recipient in the To or CC field

My iPad is only showing one recipient on received emails despite being able to see multiple recipients on the same email when I view on my laptop. I've rebooted, deleted accounts and set them up again and done a restore but its the same. I have compared screens to a colleagues iPad on the same email he can see all the recipients but I only see one.

I figured it out. I needed to fix some errors in my account information. It works fine now.

Texting to more than one recipient?

Similar Messages

Maybe you are looking for