Textmessage doesn't work on my Ipad2. Why?

I have a problem on my Ipad2, running the lastest version of IOS. I can't use Textmessaging instead, my Ipad2 guides me to use iMessage, which I don't wanna use.
Any solution is welcome.

You can try TextMe.
https://itunes.apple.com/sg/app/textme-free-texting-international/id338088432?mt =8

Similar Messages

Apple Modem (for dialup) doesn't work in Lion. Why?

We have no acceptable alternatives for dialup where I live here. Even dialup is difficult. But the Apple Modem does not work in Lion!
Anyone know why Apple did that?
And what alternative is there for us (other than resinstalling Snow Leopard).
Does Apple not know that there are still PLENTY of places with poor or non-existent Internet services?
Does anyone know of an option?
Using a MacBookPro, but the problem appears to be Lion so the hardware would not seem to matter...

Hint: Look in the upper right hand corner
Re: Fax modem doesn't work under Lion
Re: will apple's usb modem work with Lion
external modem
Re: After installing Lion, my usb broadband modem doesn't work

Sound doesn't work(only in firefox). why? sound doesn't work(only in firefox). why? (adobe flash player doesn't work even thought it's installed)

sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't know

What does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]]

Mighty Mouse - scrolling to zoom view doesn't work in Photoshop CS, why?

I just got my new G5. Apple's new Mighty Mouse doesn't seem to work right with the main apps I use. You can't use the scroll wheel to zoom the view, in either Photoshop or Cinema4D (3d app). I tried turning off horizontal scrolling in hopes that it would fix the problem. Nope. No zoom. Can you remove the Might Mouse driver so it is just a two button/vertical scroll mouse?
Quad G5, 1.2ghzPowerlogic Quicksilver, 800iBook Mac OS X (10.4.3)
733Quicksilver, 800iBook Mac OS X (10.2.x)

Doh! I thought that was on by default. It still doesn't work in my 3d app though, but I found out that is a know issue and the latest update should fix it. Thanks for your help.

Gradient Wipe Doesn't work in HD Sequence Why?

I apply the gradient wipe to DV footage in a DV sequence in Final Cut and all works well. I can wipe between clips or from an empty area of the timeline to the clip. However, when I apply the gradient wipe to HD footage in an HD sequence
(1920x1080i, uncompressed 10bit or 8 bit, Motion Video Processing Best, Normal, or Fastest, Render in 8 bit, 10bit or Precison YUV--makes no difference),
not all is well. I can wipe between clips, but I can't wipe from an empty area of the timeline to the clip. The wipe icon in the latter case is visible on the head of the clip in the timeline, but no wipe effect can be seen. It just appears as a straight cut. I've tried using a slug instead of an empty timeline, but as soon as I make the slug transparent the transition appears as a cut.
WHATSA MATTA?
FCP 5.1.2, QT 7.1.3, OS 10.4.7

Duplicate of gradient works in Chrome but doesn't work in IE
Timo

Hyperlink doesn't work in Adobe Viewer, why?

Hi everyone! I'm creating an interactive newsletter in Indesign CS6 for the iPad and iPhone. I have a 3D model that I would like to demonstrate, but here comes the problem. I have a link to the IPM viewer (the 3D model is there), but when I use this URL it does not work. The adress starts with: ipm://.
When I press the link in Adobe viewer it shows: an error 101. Also just to inform I do have IPM viewer on my ipad and iphone.
I really want to have this link work. Please help me work this out! Is there any other way to demonstrate a 3D model in Indesign?
Thanks
VV
P.S. Earlier I tried to use the 360 view by making lots of images, but eventually the sad thing is that it works ONLY horizontally! And that made me very disappointed honestly saying.

Ok..very possible, but I was not quite sure. That is one of the reasons why I've posted this question. This ipm link works on my iphone through the e-mail (see attached).
Note: the ipm address is not complete as I deleted it in Photoshop. Pls don't pay attantion to that .

TwoWay binding doesn't work using StringFormat={}{#:#.####}, why and how to fix it?

<TextBox Text="{Binding doResult,UpdateSourceTrigger=PropertyChanged,StringFormat={}{#:#.####},Mode=TwoWay}" Grid.Row="8" Grid.Column="1" Visibility="{Binding ODvisbility,Converter={StaticResource BooleanToVisibilityConverter}}" Style="{Binding ODStyle}"/>
After changing the stringFormat from 0:0.#### to #:#.#### twoWay binding has stop responding.
I fixed one problem and end up with another!

It is hard to say without having seen all of your code. The information in your last post says nothing but there seems to be nothing wrong with the StringFormat as the property gets set as expected using the sample code I posted. You can try it for yourself
if you don't believe.
Please upload a reproducable sample of your issue to OneDrive and post the link to it here if you want anyone to be able to be able to get a clue on what is going on in your application.
Edit:
Now I see, it is the target property doesn't get set correcty. Please describe your issue in a bit more detail in the future :)
Well, StringFormat and UpdateSourceTrigger=PropertyChanged is not a really good combination all the time. You should probably remove the StringFormat and try to handle the formatting logic yourself by for example using a converter. Something like this:
class DoubleConverter : IValueConverter
bool addDecimalPoint;
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) {
double d = (double)value;
string s = d.ToString("#.##", System.Globalization.CultureInfo.InvariantCulture);
if (addDecimalPoint) {
s += ".";
addDecimalPoint = false;
return s;
public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) {
string s = value.ToString();
if (s.EndsWith(".")) {
s += "0";
addDecimalPoint = true;
double d;
if (double.TryParse(s, System.Globalization.NumberStyles.AllowDecimalPoint, System.Globalization.CultureInfo.InvariantCulture, out d))
return d;
return value;
<TextBox Text="{Binding doResult,UpdateSourceTrigger=PropertyChanged,Mode=TwoWay, Converter={StaticResource doubleConverter}}" />
Please refer to the following page for more information about converters:
https://msdn.microsoft.com/en-us/library/system.windows.data.ivalueconverter(v=vs.110).aspx
Using StringFormat and UpdateSourceTrigger=PropertyChanged will probably not work anyway.
Please remember to mark helpful posts as answer and/or helpful.

Now it totally doesn't work!!! WHY?

so i was downloading some music on my new 30GB iPod video tonight. for some reason iTunes froze. i had to force quit and actually hold down the on/off botton to finally restart my powerbook. bummer. after the reboot, iTunes does not recognize my iPod. so i re-installed the updater and such with the CD-ROM. did not help. what's interesting is that the iPod shows the correct amount of disk space left, now with all the music i put on it. but it doesn't show it and i can't listen to it.
okay, so then i tried to "restore" my iPod, but the utilities can't even find the connected iPod to do that. i want to, but my computer won't see it connected!!!! AHHHHH!!! i love mac, but geez, why can't i fix this!?
thanks for al of your help, i read your forums all the time.
Powerbook G4 Mac OS X (10.3.4)
Powerbook G4 Mac OS X (10.3.4) new iPod video

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Blocking cookies with Tools Options Privacy Exceptions doesn't work on some sites, why?

I have Firefox 3.6.9 (on XP pro) set to '''ask me every time''' and '''block third-party cookies'''. Despite this I noticed that both ''live.com'' and ''yahoo.com'' (neither of which I visit directly) were able to leave persistent cookies. Having noticed this I '''blocked''' both sites using the method in the header. This did not work.
I only managed to block them by visiting the sites and using '''Page Info > Permissions'''.
It would be nice to know why this can happen. Thank you.

Thanks for that cor-el. I haven't got any cookie related extensions enabled, and it happened in Safe Mode.
I haven't got the problem any more as I explained, I really wanted to know why an apparently blocked third party site was able to bypass the block.

HT201322 swipe and hide app options doesn't work on my ipad2, how can I get it to work?

I have followed the directions to swipe and hide apps from the purchased apps history on my ipad2 but when I swipe the app in the list nothing happens, any help please?
I have managed to hide purchased app in itunes on my PC but that hasn't synced with my ipad!

If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Installing Apps being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. You could also do Settings > General > Reset > Reset Home Screen Layout which will re-arrange your apps and might make it easier to find

Value="${bean.param}" doesn't work on tomcat 5, WHY ?

Hello,
I have a web application with jsf 1.1. My application has to play some flash movies. Here is my playMovie.jsp :
<h:form id="form" onkeydown="return sendInfo(event);">
       <h:commandButton id="redirect" action="#{marketTest.whichSessionAction}" style="visibility:hidden;"/>
       <h:outputLabel id="videoName" value="#{marketTest.videoName}" style="visibility:hidden;"/>
       <f:verbatim>
          <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
                  codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
                  width="800" height="600" id="market" align="middle">
              <param name="allowFullScreen" value="false" />
              <param name="movie" value="${marketTest.videoName}" />
              <param name="menu" value="false" />
              <param name="quality" value="high" />
              <param name="bgcolor" value="#000000" />
              <param name="loop" value="false" />
              <embed src="${marketTest.videoName}" menu="false" quality="high" bgcolor="#000000" width="800" height="600" name="market" align="middle"
                     loop="false" allowFullScreen="false" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"/>
         </object>
         <br/>
       </f:verbatim>
        <h:outputText value="#{marketTest.userPosText}"/>
     </h:form>I test it on my computer where I have tomcat 6 and it works very well, but when I put the application on the server where is installed tomcat 5, I have no movies and when I looked at the source page I saw that ${marketTest.videoName} wasn't translated to the real movie name.
Does someone know what can I do ?
Thanks in advance.

EL in template text only works on Servlet 2.4 / JSP 2.0 and newer. So you need at least Tomcat 5.5. Tomcat 5.0 is Servlet 2.3 / JSP 1.2 and Tomcat 6.0 is Servlet 2.5 / JSP 2.1.
To fix this, use JSTL c:out tag. This problem is by the way not related to JSF.

What do I do if the the wall charger doesn't work for the ipad2?

my ipad 2 won't charge with the wall charger. What do I do if that happens?

If it's saying 'not charging' it is likely still charging, just at less than optimum and will take much longer than normal. You can go and get a new brick at almost any retail outlet. (yours could be covered under warranty if it's not too old, but sending it off doesn't help you charge it while it's gone)
If you buy a new brick and still get the 'not charging', you can also swap out the USB cord. If you try it with multiple outlets, multiple bricks and multiple cables...you can try to reset your iPad, either power cycle it or hold down the home and sleep button until you see the apple logo.
If you reset it and have used multiple combinations of outlets and bricks and cables then it's a very good possibility that your docking port/USB port on the iPad is going bad. Which means, depending on how old it is, you can likely exchange it or send it in for replacement/repair.

MacBok pro Audio line in port doesn't work for microphone input Why?

I turn line-in port on in System preferences/sound but no reaction. Using within third party applications like Hear or Amadeus the recording via head set microphone is without problem. What is wrong with the Mac os ?

Actually, I've found the following problem with mine:
If the jack is stereo jack, the computer is in "line in" mode, where you need higher signal level (approx. 500mV afaik) which no passive microphone will provide. If the jack is mono, it "looks" for an external microphone and it works.
Both sockets (in and out) of the MBP are intelligent, in the sense that they detect what's connected based on the jack configuration.
I have a headset with a stereo pink jack (the microphone) and it is not working. Another microphone that I have, with a mono jack works flawlessly.

IMessage doesn't work all the time

Hi,
I'm using iPhone4S and noticed that recently for the past week, iMessage doesn't work when I text my husband who's using iPhone4.
I tried switchin network (wifi and telco data) but both also doesn't work. Please advise why this is the case and how to fix it.
SMS international is costly.
Thanks.

Ask him to enable his email address to receive iMessages and do the same on yours. It's in Settings > Messages.

HP P1102w Wireless Function Doesn't Work!

- I am tech savvy
- used search, google, etc.
- Mac OS X 10.8.3
- HP P1102w, driver 5.0
1. installed "HP LaserJet Full Feature Software and Driver"
2. watched http://youtu.be/c972ybZvZzo
3. after inputting my wireless information (SSID, password), I am redirected to a blank page with this url: http://localhost:5050/cgi-bin/ip_wireless_result.htm
The USB works, but the wireless feature doesn't work at all. Why does life have to be so hard? This is extremely frustrating.

I know that sometimes just pressing the wireless button one time can disable the wireless feature unless you are certain your wireless feature is completely broken. I suggest holding down the cancel button for five to ten seconds until the configuration page prints out and it will provide you with some information in the network section (for example: Wireless DISABLED) if it is not working.
Also, here is a link to the firmware update for this printer designed for your Mac - Version: 20130213. I know this printer can be confusing so here is a link with the User Guide for this model.
I would print that configuration page and try to update the firmware and see if that fixes this for you. Let me know if it works. If not, do you see anything in the network section of that page that prints out that says it has been disabled?
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Textmessage doesn't work on my Ipad2. Why?

Similar Messages

Maybe you are looking for