Texts for Smartforms
Hi,
Can anyone please tell me how the entries are maintained in the table STXFTXT. This table holds the Texts of the smart forms which are read using the Function Module SSFRT_READ_TEXT.
Useful answers will be rewarded.
Thanks & Regards,
Divya
Try using TEXT MODULE option in the smartforms.
Similar Messages
-
Hi..how we enter standard text for smartform using include text
hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get textHi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad -
How we enter text for materials in purchase order smartform
hi guru
how we enter text for materials in purchase order smartform
my requirement is create smartform for purchase order.
in this i have to create item-text, by using which tcode we can give item data
plz give more expalnation for this plzzzzzzzzzHi,
You can use read_text function module for readind text of material and store this value in internal table later pass this internal table to smartform will solve your problem.
otherwise there is direct option for text element property that is include text u can use that also
Regards
Gagan -
How to get the texts for each line item for Sales order in a smartform
I'm createing a smart form in which i need to display certain texts for each line item of a sales order. How can i get those??
I'm trying with the table STXH and FM read_text... but i'm not clear how and what i'm getting... can anybody pls help me.....Hi There,
But then i will be getting only the value. i want to link that against the particular material of the Purchase Order.
Like for ex:
PO No. Material Code Line Item Basic Excise Tax Inv Value
0000001 5000251 010 100 16 4.64 120.64
0000001 5000252 020 200 32 9.28 241.28
Can u help me on this?
Regards,
Jitesh -
Page break for Smartform with multiple main window on pages
Hi Experts,
I have a requirement for printing 3 pages. The difference among the 3 pages is the main window part.
The main window contains not only internal table, also complicated texts like payment instructions etc.
The requirement is in each page, the data in internal table should be changed, also payment instruction should be changed accordingly.
e.g:
Main Window of Page 1
Part 1 for Internal table
VAT on ITEM ------- 4O-------60,00------0.00%-------EUR
Part 2 for Payment Instructions
Texts for Page 1
Main Window of Page 2
Part 1 for Internal table
VAT on ITEM ------- 5O-------60,00------0.00%-------EUR
Part 2 for Payment Instructions
Texts for Page 2
Main Window of Page 3
Part 1 for Internal table
VAT on ITEM ------- 6O-------60,00------0.00%-------EUR
Part 2 for Payment Instructions
Texts for Page 3
At first, I was using only one page 'Page1' with a variable page_no = 1 as default value, and use program line page_no = page_no + 1 as counter. when page_no = 2, use command for force page break to 'Page1', then under the command, change the internal table and payment instruction texts. when page_no = 3, ...
But I encountered an error saying:
Runtime Errors GEN_BRANCHOFFSET_LIMIT_REACHED
Short text
Jump distance is too large and cannot be generated.
So I created 3 pages, with different main window M_window1, M_window2, M_window3 for each page. In page1, after printing the M_window1, page_no = 2, use command to go to page2, but page2 is never printed. I think this is because only one main window can exist in a smartform? but why smartform allows creating individual main window for different pages? what's the use of such main window?
By the way, what's the use of command for force page break? only work for one main window in a smartform?
Getting back to my requirement, I think I should still use one page and command for page break. I am trying to solve this.
Thanks.
Li Jun Da.Now I am using 3 pages: Page 1, Page 2, Page 3.
Page 2, Page 3 are copies of Page 1 with main window renamed as second window: mw 2, mw 3.
I also created 2 command nodes in main window of page 1: cmd 2, cmd 3.
cmd 2 is for page break to Page 2, cmd 3 is for page break to Page 3.
The second window mw 2, mw 3 in Page 2, Page 3 can be displayed.
Even though, I still can't understand how main window of pages (not 1st page) can work. -
How to display long text in smartforms
Hi experts,
Iam trying to display long text into smartforms.I got the long text into ITAB frm database
in the abap program.In the form interface how to define the variable?In the long text i have 6 lines.
points guaranteed
cheers
kakiKaki,
Delcare a table and getting the LONG TEXT is not the right way of doing this.
You create a TEXT object and change the TYPE to INCLUDE TEXT. Once that is done all you have to do specify the parameters of your long text - TEXT ID, TEXT OBJECT and TEXT NAME. These are the same parameters that you use for READ_TEXT funciton. You don't have to fetch the text manually, it happens automatically.
Make sure this is a part of the main window as this might run into multiple pages.
Regards,
Ravi
Note : Please reward the posts that help you. -
How to add standard text in smartforms?
Hi friends,
How to add standard text in smartforms ?
points rewarded soon
Regards
RHCreating the Standard Text:
Go to SO10
1. Enter Text Name. For example, ZABC
2. Text ID ST
3. Language EN
Click on Create.
And enter the Required Information and save.
To include a Standard text in SmartForm.
Follow the steps below:
1. Create a text node in the window.
2. Under general attributes select "Include text" as Type.
3. Specify the fields under Text.
Text Name ZABC
Text Object TEXT
Text ID ST
Language EN.
Hope it helps.
Regards. -
How to use standard texts in smartforms
Hi Friends,
How to use standard texts in smartforms, ie in scripts we are using standard texts using tr so10.
thanks in advance,
regards,
sharma.For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10 -
How to create Standard text for terms and conditions of po print form
Hi anybody,
I want create Terms and condtions inside smartforms PO FORM , how do i create terms and conditons and how use font size? I don't want hard code inside smartforms , I will create seperate texts for terms and condition after i include inside smartform.
How i will do ? anybody please tell me.
Thanks
S.Muthu.Hi Subramaniyan,
U an create an include text node in your smartform.And terms and conditions is the header level text,so i suppose you have to give the inputs as follows :
Text Name &**-EBELN&
Text Object EKKO
Text ID xxxx
Language &**-SPRAS&
is the data at your end .To simplify more follow the following.
1> go to your purchase order from me23n
2> open any purchase order and click on the terms and conditions text.
3> go to GOTO option of the text.and click on the HEADER.
4> U will find the attributes of the text which you will have to pass to the Include text in your smartforms.
The long texts arestored in STXH table.
Reward Points if useful.
Cheers,
Deepthee Kasal -
PO header text, line item text in smartform
HI,
In my smartform I am fetching the 'PO header text', 'item text', and 'material text' for PO with "Include text"( by passing text name, object id etc..) with "no error if no text is maintained" checkbox checked
This is working fine In the development servers....
but when I moved these requests to quality servers...the above mentioned texts are not getting displayed in the smartform...while Texts are maintained in PO.
What can be the problem??Hi,
Thanx for ur reply...
But will you pls tell me how to achieve the same??
Thanx. -
PO header and line item text in smartform
HI,
In my smartform I am fetching the 'PO header text', 'item text', and 'material text' for PO with "Include text"( by passing text name, object id etc..) with "no error if no text is maintained" checkbox checked
This is working fine In the development servers....
but when I moved these requests to quality servers...the above mentioned texts are not getting displayed in the smartform...while Texts are maintained in PO.
What can be the problem??I guess there cant be any problem with the Include text . The problem can be either the text is not maintained or may be the include is not getting executed.
See if you have any conditions in the condition tab.
Check it in the debug mode and let me know if includ text is getting executed but value is not getting populated,
Better you can do one thing
Take the generated functional module name let us suppose your FM nae is /1BCDWB/SF00000100 then add SAPL as below
/1BCDWB/SAPLSF00000100
Now go to SE38 and give this Program name and in the program find the code with the Text id .
Supose your Text id is 'ZTXT'.
find with this this ID and find which function module is used to get your text.
Put break point on the FM and now execute the form.
Check whether values text is getting populated .
Thnanks,
Nageswar
Reward if problem solved -
hi,
I want to include one standard text in smartform how cani do itFor long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above -
Standard Text in Smartforms using SO10 Transaction
Hi,
My requirement is i have IF Condition followed by Elseif. when ever any of above conditions satisfy i need to print a text of at least 5 lines.
If <>
Print Text upto 5 lines each line at least 100 char(text1)
elseif <>
Print Text upto 5 lines each line at least 100 char(text2).
else <>
text24.
If solution for the above is using SO10 Tcode then plz expain me in detail.
thanx in advanceHi
Check this
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Subtotals - Check the link...
Re: Subtotal with Table Node in smartforms
Regards
Anji -
Help needed regarding 'Address Text' in Smartforms
hi guys,
To display the address text in Smartforms, we include an 'Address' component and provide the respective address number to it. I just want to know which is the table where the complete address text corresponding to the address number is saved. I have checked the 'ADRC' & 'ADRCT' tables but in vain. Help me out.
With regards,
Sandeep Panja.Hi Panja,
In smartform u have to pass the address no and it's give the full address by FM ADDRESS_INTO_PRINTFORM .plz check this fm and for address check the master table like vendor the table is LFA1 to get the address for it
tarak -
Copy and paste of texts into Smartforms
Hi,
I have a design document that contains label texts for a Russian form. The characters look fine in the document, but when they copied and pasted into Smartforms, the characters turn into question marks.
Any help is rewarded and appreciated.Hi
That may be due to Unicode problem
Make the Texts conversion using SE63 and copy and see
See that the Russian language should be activated in the system to accept that language.
Reward points for useful Answers
Regards
Anji
Maybe you are looking for
-
Is there a way to only use external monitor and have the MBP open to keep it cool?
I'd like to be able to just use an external monitor with my MBP due to space limitations, However, when I close the lid on my MBP, it overheats and the fans go crazy, making a terrible racket without cooling the machine :/. The Screen preferences do
-
We are considering purchasing one of the Photosmart premium all in one printers but noticed it only specifies printing number 10 business sized envelopes. Is this the only size it will do? My wife does a lot of invitations and many of them are in e
-
How can I turn off Facebook check-in notifications?
I keep getting notified when one of my facebook friends checks in to a certain location. Thing is I'm not interested in being informed of this. Is there a way to turn off check-in notifications? And before you answer, yes I have gone to Settings > Fa
-
How to hide Summary Tab of Production Order for a Particular User
Hello Experts, My customer doesn't want that all users are able to see the Summary Tab information in Production Order, as it contains Cost information, which is very confidential in their case. Does anybody has idea how to achieve it ? Best Regards,
-
Multi processing / GPU Adobe Premiere Pro not working fast
Hi I've got a Six core CPU and i'm wonderring why when i do my render it don't use all the power I've. The maximum is about 30% of the possibility, sometime it's higher like 80% but why it's not alway 100% because I can't use my computer during this