Texts from Verizon in the middle of the night
I don't appreciate getting texts from Verizon in the middle of the night. Of course, all 4 of us on our plan got those same messages. When I called, the representative I talked with said, of course, that these are automated messages and they have no control over them. I had 14 texts from Verizon beginning at 12:38 AM and ending at 4:26 AM. The texts were in reference to data usage which the representative said was probably from 24 to 72 hours ago. Then text me during the day. How aggravating!!!!!!! Has anyone else had this problem????
The texts are sent as soon as reported data hits each threshold. Data use information is synced to your account during those times of the day when reporting can be more accurate considering most people don't use data at those times and congestion on the network would be at its lowest.
Similar Messages
-
How do i send a text from verizon messages when im not the primary phone on the account
I have no service at work in the building. I would like to send and recieve texts via Verizon Messages but I am not the primary on the account, How do I fix this.
mvener11,
We certainly want you to have access to Verizon Messages while at work. Each line of service is eligible for its own My Verizon account and Verizon Messages. There is no need for you to be the account owner to register for My Verizon. That being said, since you are not the Account owner, you will be limited on the account information you can see, but you will still have full access to Verizon Messages for your line of service. Click here for more info http://vz.to/1IPhplk
SandyS_VZW
Follow us on Twitter @VZWSupport -
Text appears in the middle of the original message when replying
Has anyone had this problem? When replying to an email the reply message text appears right in the middle of the detail header of the original message. Here is an example:
Original Message:
From: Jane Doe
"Yes 2PM at Market Place works for me."
To: Tawnbi
Sent on xx/xx/2007, Friday, etc.
Hey! How about 2PM tomorrow at Market Place?
Okay. The text "Yes 2PM at Market Place works for me" was the reply. Why didn't it appear above the detail header to the original message? The rep at Apple Store in Chicago said he's only had one other customer with this problem. The email is being accessed through Outlook Web Access. Has anyone had this problem? If so, found a solution?That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.
Go to the Map, Background & Animatic Browser (last button in the centre tool bar alongside the Transition button). Drag the Black background (or any background) to your project. From an Event, drag the video selection directly onto the Black clip in the project. As you drop the video clip, a pop-up menu will appear. Select Picture in Picture.
Your video will appear as a small picture within the black clip. Click on it and reposition it to the centre of the viewer, using the yellow guide lines to get the exact centre position. Resize the Picture in Picture if desired by dragging the corner handles.
NOTE: You may need to extend the duration of the Black clip to match the duration of the video clip. Double-click on the Black clip to open the Inspector, then adjust the duration there.
John
Message was edited by: John Cogdell - added NOTE -
Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7) I would really like to hear my songs all the way through, but I can't . I tried the "Convert Protected ACC files to Purchased ACC files fix" but it DIDN'T work. I don't know what to do. It does it when I transfer the music onto my Classic too.
What do you mean "doesn't recognize"?
-
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
-
my Mac book air will not start up it hangs in the middle of the status bar when I turn it on and will not move.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I ve got an iPhone 6 with iOS 8.1.1i forgot my password i ve tried to restore it from itunes but in the middle of the downloading it asks for password how do i restore my phone?
Hi there pablo nina,
Welcome to Apple Support Communities.
It sounds like you’ve forgot the passcode for your iPhone and you want to know how to restore it. The article linked below will walk you through the process of restoring your iPhone from recovery mode using iTunes.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Cheers,
-Jason -
Satellite M60-139: Split from button to the middle of the lid
Hello Forum-Friends and greetings from cologne/germany,
I hope I can describe my problem good enough to find help although my bad english ;-)
Yesterday I recognised a tore (in german it is called "Riss") in the lid (in german we say "Deckel") of my M60-139 notebook.
This tore grows from the opening-button ca. 3cm to the middle of the lid. If needed I can send you a picture ...
So my question is:
How can I open the LCD and the lid to glue the tore from inside with a very strong 2-component-epoxy to prevent the tore growing ?
Regards
Friedel
Any ideas or pictured disassembling manuals to: [email protected]Bluescream thats it ! Thanks to you and to the other members !
Your idea was quite good and as toshiba just sended me the hint to contact a toshiba service
shop (in south-germany as I live in cologne which is in nordrhein-westfalen) I came to the opinion to do it myself. Also I got no answer if this is a material problem and if toshiba will repair this for free ... Not very good !
So I tried your perfect description-link !
The bezel is just holded by 4 screws and the rest are just simple clips. The LCD-Frame is fixed with (I think it were) 4 screws too and I could reach the problem zone which was hidden under a kind of aluminium foliatec. Bending this foliatec away it was possible to glue the inner side of the tore with 2-component-epoxy-glue ! There is no problem with hidden or very difficult items - you can just see what to open and it is very logical.
Now (after this glueing-operation) it even looks damaged but I hope the tore will not grow up. The laptop works ... and I don't have to give it away to toshiba for month !
Thanks to all forum-members !
Greetings from cologne - Friedel -
new iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server. by the way i try to dowload from turkey.
anyone help me there? )=
-
When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"Hi bahaluly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
Get help with iOS update and restore errors - Apple Support
Solve network errors
Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Cheers,
Mario -
How to get Text from (.txt) file to display in the JTextArea ?
How to get Text from (.txt) file to display in the JTextArea ?
is there any code please tell me i am begginer and trying to get data from a text file to display in the JTextArea /... please help...public static void readText() {
try {
File testFile = new File(WorkingDirectory + "ctrlFile.txt");
if (testFile.exists()){
BufferedReader br = new BufferedReader(new FileReader("ctrlFile.txt"));
String s = br.readLine();
while (s != null) {
System.out.println(s);
s = br.readLine();
br.close();
catch (IOException ex){ex.printStackTrace();}
}rykk -
Starting Songs From The Middle Of The Song
Sometimes when listening to iTunes or my iPod, I skip a song while it is in the middle of the song. Why is it that this information is then saved so that when that song is selected next, it continues from the exact point that I skipped ahead at the last time I listened to it?
Is there a setting so that all songs will automatically start from the beginning no matter what when they are selected?Ya, go to the song in iTunes, select it, do a Get Info and then under Options there is a check box for Remember Playback position. You will likely find this checked. Uncheck it and you should be all set.
You can select multiple songs at the same time, go a Get Info, then at the bottom there is a pull down for turning this ON/OFF for the whole groups of songs. So you could select your whole library if you wanted, Get Info and then turn it off for all of them to be sure.
Patrick -
I cannot receive texts from one contact after updating to the iOS7 system - why?
I cannot receive texts from one contact after updating to the iOS7 system - why?
amyhs, thanks for those details. This is certainly quite odd that this has been going on so long and we definitely want to get to the bottom of this. Now, you stated that you have reached out to technical support and spoke with a tier two technical support representative. At this time, what actions or troubleshooting steps were taken? Are you aware if a ticket with our network technicians was ever created? As well, have you ever previously had an iPhone and are you aware if the users that are unable to message you are using iMessage?
AdamG_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
Maybe you are looking for
-
How can I read pdf files in linux?
I know the pdf files can be read by Adodb acrobat,but i can not find the software for linux,How can I download the similar tools ? Thanks for advance.
-
How to check if "create session" is being audited in the aud$
Specifically, how do the determine if "create session" is being audited? Assume audit_trail=db_extended, audit_sys_operations=true and audit_file_dest has been set. Please specifically how to check if "create session" is being audited. Thanks
-
Has anyone out there had any luck identifying object browsers for the forte environment? I'm aware of Rational Rose' and Select' reverse engineering capability that allows the creation of inheritance diagrams. But this is a disconnected capability ba
-
Hi, I am new to BW please send me any helpful links, documents that are useful in creating reports, understanding the cycle of report creation. Thanks, Swetha
-
Hi,all I'm a chinese mapviewer user. I used to deploy my mapviewer application on simplified chinese windows platform. This time,I must deloy my application to hp-ux platform with oracle ias10g(9.0.4) installed. The problem I encountered was that the