Texts go into MMS and when I text someone it adds the recipient twice and sends out 2 texts.

I am having a problem after downloading the verizon update 10.1.0.4189   all texts go into MMS and when I text someone it add the recipient twice and sends out 2 texts.    Anybody have this issue and any luck resolving?

Just found this thread: http://supportforums.blackberry.com/t5/BlackBerry-Q10/Text-messages-being-sent-switched-to-MMS-and-b... If anyone here's that this resolved, I'd love to know. Thanks!

Similar Messages

  • I have a Mac leopard.  Did a recent recommended update.  When it finished,I restarted then a window came up to enter Master Password.  I don't know what it is  and when I try to enter one, the window shakes and I am unable to use computer at all

    I have a Mac leopard.  Did a recent recommended update.  When it finished,I restarted then a window came up to enter Master Password.  I don't know what it is  and when I try to enter one, the window shakes so I am unable to use computer at all.

    Please confirm exactly what Mac this is, and what 'recent update' you installed.

  • I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

    I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

    I would also like this issue addressed.
    I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
    I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
    Message was edited by: picardsm

  • When i open facebook and only text shows and all is to the left and when i open hotmail nothing shows on my screen and other webpages have problems also when click at a link all the text comes up also to the left in my screen whats wrong ???

    When i open facebook and only text shows and all is to the left and when i open hotmail nothing shows on my screen and other webpages have problems also when click at a link all the text comes up also to the left in my screen whats wrong ???

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    See also:
    * http://kb.mozillazine.org/Websites_look_wrong
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • Using the paste options randomly misses out text, don't use it and use the 'Paste Special...' option instead (MS Outlook)

    Also there seems to be no obvious way to report Office bugs.  This is leaving little room for improvement.  Not sure if there has been any planning on this front???
    For example, [MS Outlook] using the paste options randomly misses out text, (don't use it and use the 'Paste Special...' option instead).  But how do I communicate this to the Office team without knowing at least one of the team personally (which I
    don't)???

    Hi,
    Do you have this issue when pasting in other programs?
    If you are pasting something into Outlook, some formats and images may get lost, especially when you choose the Paste Options as Keep Text Only.
    Once you have this issue again, please try with "Keep Source Formatting". This may keep the Sour Formatting and you may not get the text lost.
    If you have any feedback when using our products, I suggest you press Ctrl + Alt + 7 or Ctrl + Alt + 8 to submit it. Microsoft will always listen to users' voice and make the products better and easier to use.
    Regards,
    Melon Chen
    TechNet Community Support

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • I was on the phone last night and my phone randomly turned off.  It will not come back on even when I have tried to hold the home button and the power button together while being plugged into the computer.  What do I do?

    I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?

    Plug it into power for at least 15 minutes.  If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • HT1725 I have purchased and album and when it downloaded it came in the from of 16 separate single tracks how do I make it into one album ?

    I have purchased and album and when it downloaded it came in the form of 16 separate single tracks how do I make this into one album ?

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the entries, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • I went into itunes on one of my computers and when I went to sync up the songs I had purchased it wouldn't let me.

    I went into itunes on one of my computers and when I went to sync up the songs I had purchased on another computer, both of which are authorized on the same account, it would not detect that I had purchased the song, even though I have a receipt saying that I purchased the songs days ago.

    Hello Vulspyr
    Look in the iTunes Store and there will a link that says Purchased, once there you should be able see all purchased made under the Apple ID that you are signed in with and there should be a cloud icon to download those tracks. The article below will assist you further.
    Download past purchases
    http://support.apple.com/kb/ht2519
    Regards,
    -Norm G.  

  • I updated my iMac to lion and now when i leave my desktop and it goes into stand by it like a picture is taken of the screen and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopar

    i upgraded my iMac to lion and now when i leave my desktop and it goes into stand by mode, its like a picture is taken of the actice desktop and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopard. does anyone else experience this and is there a fix?

    I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard.  It was totally updated with the latest from Apple when I bought and tried installing Lion.  The upgrade failed, shot my OS and I couldn't boot.  Had the constant spinner on a grey screen..  did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck.  Crashed my system one too many times.  I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac.  I have the stuff running on my Mac Pro but have yet to notice anything impressive.  I've always used F3 and really didn't require Mission Control.  Just open you app folder for launch pad... duh?  I use the hot corners anyhow.  As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow.  I don't like the new Mail either..
    As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

  • When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low. However when I activate the speakerphone the recipient can hear me loud and clear. I transferred my SIM Card into a new device Same problem

    When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low. However when I activate the speakerphone the recipient can hear me loud and clear. I transferred my SIM Card into a new device only to be subjected to the exact same problem. I have reset the phone clearing all the data and updated to the most recent software version available from itunes; and still no improvements. The results of my switching to a new phone would indicate a software issue.
    Does anyone out there have this problem and how can it be fixed?
    Thanks,
    Teresa

    Try removing the screen protector that is covering the microphone.
    Scratch that; wrong answer. I thought you meant you had trouble hearing.

  • My ipod when i cut it on shows the ITunes icon and the usb plug icon on my ipod screen. so I plugged it into my computer and when it took me to the Itunes menu it says I needed to reinstall the proram to the manufactures settings and upgrade.

    My ipod when i cut it on shows the ITunes icon and the usb plug icon on my ipod screen. so I plugged it into my computer and when it took me to the Itunes menu it says I needed to reinstall the proram to the manufactures settings and upgrade. My Ipod appears to be whiped clean. I does nothing now. It didnt reinstall or upgrade at all. I have 2 Ipods and I think things got crossed up with them.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • I recently dropped my ipod in water and i placed it into rice for 3 days. Then when i try and connect it to the computer it shows the no battery screen with just the lightning bolt. and when i try to restore it the screen flashes then resest

    Then when i try and connect it to the computer it shows the no battery screen with just the lightning bolt. and when i try to restore it the screen flashes then resest to the no battery screen and i get error 1602. Do you know what is wrong with it? do you think its just the battery cause i can replace that for cheap or do you think the circuts are fried?

    No. It sounds like the water destroyed the component inside the iPod.
    About your only choice now it to take it to Apple and pay for a replacement.
    Allan

  • When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago

    When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents.  However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked.  When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

    OCR is only for recoginition of the image / picture of text provided by an scanner.
    Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image  or picture of text - it is the digital text. So, no OCR involved.
    When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
    When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
    If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
    Once OCR is performed it is the OCR output that is exported.
    OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents". 
    Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
    Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
    Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
    being processed with Acrobat Pro's Compare can certainly be done.
    But - well you've described what can be observed.
    Be well...

  • I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    Hello Unconscious2015,
    Thanks for using Apple Support Communities.
    If you are trying to configure your Mac to use SMS continuity with your iPhone, then please follow the directions below to configure SMS Continuity.
    To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
    Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
    Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
    On your iPhone:
    Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Take care,
    Alex H.

Maybe you are looking for