Texts in vendor display mode

hi experts,
i want to confirm that in xk03 one can change the text(i.e. there in services for object). in display mode one should not be able to change it.
plz revert back with ur views.
regards,
Hitesh

Hi,
Check with your Basis Consultant for display authorization.
Regards,
Chetan.

Similar Messages

  • Making short text field in Display mode for one particular Purchasing

    Hi All,
    This is regarding Making the Short text field in Display mode of PR for one Particular Purchasing.. i am giving you a bit elaborate...We are into E-Catalog Procurement.I will do the shopping from the Vendors external catalog and i will return back to SAP.
    While doing so, i dont want the user to change the Short Text field. I want that field shud display the Description. When i tried with the Screen Layout settings, it is fully grayed out and i am not able to see the Description of the Material. Is there any other options to get this enabled?. Please advice me on this settings to be done. Thanks in Advance.
    With Regards,
    Saakithyan

    Hi
    Define a Field selection key (new not the one which is assigned to document type) which makes  short text editable in screen layout config. and assign it to functional authorization value in t.code OMET. (it should be numeric). Then assign that functional authorization value in user master SU01 for users with parameter id EFB.
    Then it will work
    Regards
    Antony

  • Info record PO text--to be display mode

    Dear All,
    I want in PO item texts, only Info record PO text to be in display mode, not other texts.
    When i make display mode the Texts  in Define screen Layout at document level, all item texts are displayed.
    Kindly advise how to achieve this requirement.
    Regards

    Maintain the Copying rules, Path with OLME -> Purchasing Info Record -> Texts for Purchasing Info Records -> Define Copying Rules, Also check the link for details - [PO item text update control to Info record  |PO item text update control to Info record]

  • Text ID in Display mode in Text Determination

    Hi All,
    I configured text determination as mentioned below
    1. Create Text ID
    2. Create Access Sequence
    3. Assign the Text ID in the Text procedure and also the access sequence.
    4. Also selected the option "Text will be displayed during copying.
    Now the problem is after doing the PGI, again if i want to change or enter any new Text in the HEADER- TEXTS Tab it is showing in display or grey mode.
    Can anyone please let me know if there are any settings needs to be done to get it back to editable mode or i did any wrong in the process.
    Thanks in advance for your help.

    Hello,
    The configurations done by you seems perfect. Also in SAP Standad you can change / insert Text in Delivery Header after PGI.
    You will have to debug the Program & check if there are any Z-Developments or User Exits applied in your case.
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Material Mater Purchase Order Text in Display Mode in T.Code MM02

    Dear Experts,
    In some code when I want to change the PO text in Material master it reflect in Display mode but maximum code display in change mode plz explain where is the setting.
    RCR

    HI,
    To change the settings of any field in transaction to display, change, required, or hide, u have to pick the field selection group from OMSR and then go to OMS9, select your transaction and then change the settings.
    Hopw this helps,
    Swapnil

  • Vendor field needs to be made in display mode in MIRO

    Hi,
    The PO was created for Vendor 'A', whereas invoice was wrongly posted to Vendor 'B'. Before noticing it, the vendor has been paid. Now the user wants to reverse the same and redo it to correct vendor.
    How we can restrict manual change of vendor during MIRO? Whether we can make the vendor field in display mode under Details tab in MIRO
    Kindly provide your inputs at the earliest.
    Thanks & Regards,
    G.Ameet Karthikeyan

    Hi
    Then write a validation that Inv. Party = PO Vendor name
    but if your client use Import PO then don't validate that because in Import PO CVD time we change the vendor name.
    Regards
    Tanmoy

  • Material PO Text in display mode

    Hi,
    When we create Purchase order with the material Code, then short text is copied from Material Master Also Material PO text is also copied from the same.
    Requirement is if material code is present in PO ( ME21N) then short text of material should be in display mode & Material Po Text( in Text tab) is also to be in display mode
    User should not be allowed to change the same , at present it is allowing the user to change short text of Material & Material PO text also.
    Please suggest
    Thanks In adavnce
    Regards,
    Rajesh

    Hi
    Check it in SPRo- sap img- Material management- Purchasing- Purchase order- Define screen layout at document level.
    Select NBF and then select Basic data item and select short text to display
    It will work
    Regards,
    Raman

  • Limited to one display mode with new nvidia drivers

    I have a problem with nvidia drivers after 8178
    I can get any display mode to work as long as i specify only one mode.
    If i enter more modes in my xorg.conf, it will ignore all those modes and revert back to nvidia-auto-select (wich is 1024x768 in my case)
    Anyway, i'm not able to change resolutions using xrandr for example. I need this for some applications that require to run in a different display mode ( old windows games i run using wine for example)
    When i run X -logverbose 5 it becomes clear that all my monitor's supported modes are in the display pool.
    I have also put in gtp generated modelines for all the modes i might need.
    I really need a solution to this as i will probably no longer be able to use 8178 when xorg7.1 hits current.
    This is what i have in my xorg.conf:
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "AlwaysCore"
    InputDevice "Mouse1" "CorePointer"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/local/"
    FontPath "/usr/share/fonts/misc/:unscaled"
    FontPath "/usr/share/fonts/100dpi/:unscaled"
    FontPath "/usr/share/fonts/75dpi/:unscaled"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/CID/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    FontPath "/usr/share/fonts/cyrillic/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    SubSection "extmod"
    # Option "omit xfree86-dga"
    EndSubSection
    Load "dbe"
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx"
    Load "bitmap"
    Load "ddc"
    Load "int10"
    Load "record"
    # Load "speedo"
    Load "vbe"
    # Load "xf8_32bpp.so"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "evdev"
    # Option "Protocol" "Explorerps/2"
    Option "Device" "/dev/input/mx1000"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "11 12"
    Option "Dev Name" "Logitech USB Receiver" # cat /proc/bus/input/devices
    Option "Dev Phys" "usb-*/input0" # cat /proc/bus/input/devices
    Option "Buttons" "12"
    Option "Resolution" "800"
    EndSection
    Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "microsoftinet"
    Option "XkbLayout" "us"
    Option "XkbVariant" ",qwerty"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    # VendorName "Iiyama"
    # ModelName "A901HT"
    ModelName "IVM:0119"
    HorizSync 27.0 - 115.0
    VertRefresh 50.0 - 160.0
    # Option "DPMS"
    Modeline "1600x1200_100.00" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    Modeline "1600x1200_85.00" 234.76 1600 1720 1896 2192 1200 1201 1204 1260 -HSync +Vsync
    Modeline "1600x1200_75.00" 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -HSync +Vsync
    Modeline "1600x1200_60.00" 160.96 1600 1704 1880 2160 1200 1201 1204 1242 -HSync +Vsync
    Modeline "1280x1024_100.00" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    Modeline "1280x1024_85.00" 159.36 1280 1376 1512 1744 1024 1025 1028 1075 -HSync +Vsync
    Modeline "1280x1024_75.00" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -HSync +Vsync
    Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync
    Modeline "1152x864_100.00" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    Modeline "1152x864_85.00" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    Modeline "1152x864_75.00" 104.99 1152 1224 1352 1552 864 865 868 902 -HSync +Vsync
    Modeline "1152x864_60.00" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    Modeline "1024x768_100.00" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    Modeline "1024x768_85.00" 94.39 1024 1088 1200 1376 768 769 772 807 -HSync +Vsync
    Modeline "1024x768_75.00" 81.80 1024 1080 1192 1360 768 769 772 802 -HSync +Vsync
    Modeline "1024x768_60.00" 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync
    Modeline "800x600_85.00" 56.55 800 840 928 1056 600 601 604 630 -HSync +Vsync
    Modeline "800x600_75.00" 48.91 800 840 920 1040 600 601 604 627 -HSync +Vsync
    Modeline "800x600_60.00" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync
    Modeline "640x480_85.00" 35.71 640 672 736 832 480 481 484 505 -HSync +Vsync
    Modeline "640x480_75.00" 30.72 640 664 728 816 480 481 484 502 -HSync +Vsync
    Modeline "640x480_60.00" 23.86 640 656 720 800 480 481 484 497 -HSync +Vsync
    Modeline "320x240_60.00" 5.26 320 304 336 352 240 241 244 249 -HSync +Vsync
    Modeline "320x200_60.00" 4.19 320 304 328 336 200 201 204 208 -HSync +Vsync
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NvAGP" "3"
    Option "RenderAccel" "TRUE"
    Option "NoLogo" "on"
    Option "RandRRotation" "TRUE"
    # Option "CursorShadow" "FALSE"
    # Option "ConnectedMonitor" "CRT"
    # Option "UseEDIDFreqs" "FALSE"
    # Option "UseEDIDDpi" "FALSE"
    # Option "ModeValidation" "NoEdidModes"
    # Option "ModeValidation" "AllowNon60HzDFPModes"
    # Option "UseEDID" "FALSE"
    Option "IgnoreDisplayDevices" "CRT"
    Option "DPI" "96 x 96"
    Option "Coolbits" "1"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 32
    Modes "1280x1024"
    # Visual StaticGray
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1280x1024_85"
    # Modes "1280x1024_85 1152x864 1024x768 800x600 640x480 320x240 320x200"
    # Visual StaticGray
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1280x1024_85"
    # Visual StaticGray
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "800x600_75"
    # Visual StaticGray
    EndSubSection
    EndSection
    #Section "DRI"
    # Mode "0666"
    #EndSection
    All the EDID specific options i have commented out appeared to be useless.
    The following Xorg.0.log was generated using only one mode, resulting in X running in 1280x1024@85hz (logverbose level 5)
    [code]
    X Window System Version 7.0.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 7.0
    Build Operating System:Linux 2.6.16-ARCH i686
    Current Operating System: Linux Orthanc 2.6.17.11 #1 PREEMPT Fri Aug 25 08:31:05 CEST 2006 i686
    Build Date: 21 June 2006
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 29 13:57:46 2006
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Layout0"
    (**) |-->Screen "Screen0" (0)
    (**) |   |-->Monitor "Monitor0"
    (**) |   |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Mouse1"
    (WW) The directory "/usr/share/fonts/local/" does not exist.
        Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/CID/" does not exist.
        Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
        Entry deleted from font path.
    (**) FontPath set to "/usr/share/fonts/misc/:unscaled,/usr/share/fonts/100dpi/:unscaled,/usr/share/fonts/75dpi/:unscaled,/usr/share/fonts/misc/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,/usr/share/fonts/cyrillic/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1"
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.8
        X.Org XInput driver : 0.5
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
    (II) Module bitmap: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules/libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,2560 card 1043,80b2 rev 02 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,2561 card 0000,0000 rev 02 class 06,04,00 hdr 01
    (II) PCI: 00:1d:0: chip 8086,24c2 card 1043,8089 rev 02 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,24c4 card 1043,8089 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,24c7 card 1043,8089 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,24cd card 1043,8089 rev 02 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr 01
    (II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,24cb card 1043,8089 rev 02 class 01,01,8a hdr 00
    (II) PCI: 01:00:0: chip 10de,0312 card 1043,80e7 rev a1 class 03,00,00 hdr 00
    (II) PCI: 02:05:0: chip 14e4,4401 card 1043,80a8 rev 01 class 02,00,00 hdr 00
    (II) PCI: 02:0c:0: chip 105a,4d69 card 105a,4d68 rev 02 class 01,80,85 hdr 00
    (II) PCI: 02:0d:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
    (II) PCI: 02:0d:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
    (II) PCI: 02:0d:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
        [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
        [0] -1    0    0xde000000 - 0xdfdfffff (0x1e00000) MX[B]
    (II) Bus 1 prefetchable memory range:
        [0] -1    0    0xdff00000 - 0xefffffff (0x10100000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
        [0] -1    0    0x00009000 - 0x000090ff (0x100) IX[B]
        [1] -1    0    0x00009400 - 0x000094ff (0x100) IX[B]
        [2] -1    0    0x00009800 - 0x000098ff (0x100) IX[B]
        [3] -1    0    0x00009c00 - 0x00009cff (0x100) IX[B]
        [4] -1    0    0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [5] -1    0    0x0000a400 - 0x0000a4ff (0x100) IX[B]
        [6] -1    0    0x0000a800 - 0x0000a8ff (0x100) IX[B]
        [7] -1    0    0x0000ac00 - 0x0000acff (0x100) IX[B]
        [8] -1    0    0x0000b000 - 0x0000b0ff (0x100) IX[B]
        [9] -1    0    0x0000b400 - 0x0000b4ff (0x100) IX[B]
        [10] -1    0    0x0000b800 - 0x0000b8ff (0x100) IX[B]
        [11] -1    0    0x0000bc00 - 0x0000bcff (0x100) IX[B]
    (II) Bus 2 non-prefetchable memory range:
        [0] -1    0    0xdb800000 - 0xdd7fffff (0x2000000) MX[B]
    (II) Bus 2 prefetchable memory range:
        [0] -1    0    0xdfe00000 - 0xdfefffff (0x100000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) nVidia Corporation NV31 [GeForce FX 5600] rev 161, Mem @ 0xde000000/24, 0xe0000000/28, BIOS @ 0xdffe0000/17
    (II) Addressable bus resource ranges are
        [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
    (II) Active PCI resource ranges:
        [0] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [1] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [2] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [3] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [4] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [5] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [6] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [7] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [8] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [9] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [10] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [11] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [12] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [13] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [14] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [15] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [16] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [17] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [18] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [19] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [20] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [21] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
        [0] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [1] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [2] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [3] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [4] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [5] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [6] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [7] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [8] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [9] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [10] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [11] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [12] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [13] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [14] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [15] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [16] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [17] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [18] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [19] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [20] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [21] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [6] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [7] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [8] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [9] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [10] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [11] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [12] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [13] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [14] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [15] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [17] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [18] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [19] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [20] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [21] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [22] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [23] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [24] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [25] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [26] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [27] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [28] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Reloading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Type1
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 7.0.0, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.8774
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "bitmap"
    (II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
    (II) Loading font Bitmap
    (II) LoadModule: "ddc"
    (II) Loading /usr/lib/xorg/modules/libddc.so
    (II) Module ddc: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension RECORD
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules/libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.1.0
        ABI class: X.Org Video Driver, version 0.8
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.8774
        Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.1
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
        compiled for 0.0.0, module version = 1.1.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.4
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
    (II) NVIDIA dlloader X Driver  1.0-8774  Tue Aug  1 20:55:35 PDT 2006
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) Found 1 NVIDIA X Screens
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.2
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules/libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
        compiled for 7.0.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.8
    (II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [6] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [7] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [8] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [9] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [10] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [11] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [12] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [13] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [14] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [15] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [17] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [18] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [19] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [20] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [21] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [22] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [23] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [24] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [25] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [26] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [27] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [28] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
    (II) resource ranges after probing:
        [0] -1    0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
        [2] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1    0    0xdb800000 - 0xdb803fff (0x4000) MX[B]
        [6] -1    0    0xdc000000 - 0xdc0007ff (0x800) MX[B]
        [7] -1    0    0xdfe00000 - 0xdfe03fff (0x4000) MX[B]
        [8] -1    0    0xdc800000 - 0xdc803fff (0x4000) MX[B]
        [9] -1    0    0xdd000000 - 0xdd001fff (0x2000) MX[B]
        [10] -1    0    0x30000000 - 0x300003ff (0x400) MX[B]
        [11] -1    0    0xdd800000 - 0xdd8003ff (0x400) MX[B]
        [12] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
        [13] -1    0    0xdffe0000 - 0xdfffffff (0x20000) MX[B](B)
        [14] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
        [15] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
        [16] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
        [17] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [18] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
        [19] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
        [20] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
        [21] -1    0    0x00009800 - 0x00009807 (0x8) IX[B]
        [22] -1    0    0x0000a000 - 0x0000a01f (0x20) IX[B]
        [23] -1    0    0x0000a400 - 0x0000a40f (0x10) IX[B]
        [24] -1    0    0x0000a800 - 0x0000a803 (0x4) IX[B]
        [25] -1    0    0x0000b000 - 0x0000b007 (0x8) IX[B]
        [26] -1    0    0x0000b400 - 0x0000b403 (0x4) IX[B]
        [27] -1    0    0x0000b800 - 0x0000b807 (0x8) IX[B]
        [28] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
        [29] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[B]
        [30] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[B]
        [31] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[B]
        [32] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
        [33] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "NoLogo" "on"
    (**) NVIDIA(0): Option "NvAGP" "3"
    (**) NVIDIA(0): Option "RenderAccel" "TRUE"
    (**) NVIDIA(0): Option "RandRRotation" "TRUE"
    (**) NVIDIA(0): Option "Coolbits" "1"
    (**) NVIDIA(0): Option "DPI" "96 x 96"
    (==) NVIDIA(0): Using HW cursor
    (**) NVIDIA(0): Enabling RENDER acceleration
    (==) NVIDIA(0): Video key set to default value of 0x101fe
    (II) NVIDIA(0): NVIDIA GPU GeForce FX 5600 at PCI:1:0:0
    (--) NVIDIA(0): VideoRAM: 131072 kBytes
    (II) NVIDIA(0): GPU Architecture: 0x30
    (II) NVIDIA(0): GPU Implementation: 0x31
    (II) NVIDIA(0): GPU Revision: 0xa1
    (--) NVIDIA(0): VideoBIOS: 04.31.20.28.00
    (--) NVIDIA(0): Found 2 CRTCs on board
    (II) NVIDIA(0): Supported display device(s): CRT-0, CRT-1, DFP-0, DFP-1, TV-0
    (II) NVIDIA(0): Bus detected as AGP
    (II) NVIDIA(0): Detected AGP rate: 4X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (II) NVIDIA(0):
    (II) NVIDIA(0): Mode timing constraints for  : GeForce FX 5600
    (II) NVIDIA(0): Maximum mode timing values   :
    (II) NVIDIA(0):     Horizontal Visible Width : 8192
    (II) NVIDIA(0):     Horizontal Blank Start   : 8192
    (II) NVIDIA(0):     Horizontal Blank Width   : 4096
    (II) NVIDIA(0):     Horizontal Sync Start    : 8184
    (II) NVIDIA(0):     Horizontal Sync Width    : 504
    (II) NVIDIA(0):     Horizontal Total Width   : 8224
    (II) NVIDIA(0):     Vertical Visible Height  : 8192
    (II) NVIDIA(0):     Vertical Blank Start     : 8192
    (II) NVIDIA(0):     Vertical Blank Width     : 256
    (II) NVIDIA(0):     Veritcal Sync Start      : 8191
    (II) NVIDIA(0):     Vertical Sync Width      : 15
    (II) NVIDIA(0):     Vertical Total Height    : 8193
    (II) NVIDIA(0):
    (II) NVIDIA(0): Minimum mode timing values   :
    (II) NVIDIA(0):     Horizontal Total Width   : 40
    (II) NVIDIA(0):     Vertical Total Height    : 2
    (II) NVIDIA(0):
    (II) NVIDIA(0): Mode timing alignment        :
    (II) NVIDIA(0):     Horizontal Visible Width : multiples of 8
    (II) NVIDIA(0):     Horizontal Blank Start   : multiples of 8
    (II) NVIDIA(0):     Horizontal Blank Width   : multiples of 8
    (II) NVIDIA(0):     Horizontal Sync Start    : multiples of 8
    (II) NVIDIA(0):     Horizontal Sync Width    : multiples of 8
    (II) NVIDIA(0):     Horizontal Total Width   : multiples of 8
    (II) NVIDIA(0):
    (--) NVIDIA(0): Connected display device(s) on GeForce FX 5600 at PCI:1:0:0:
    (--) NVIDIA(0):     Iiyama (CRT-0)
    (--) NVIDIA(0): Iiyama (CRT-0): 350.0 MHz maximum pixel clock
    (--) NVIDIA(0):
    (--) NVIDIA(0): --- EDID for Iiyama (CRT-0) ---
    (--) NVIDIA(0): EDID Version                 : 1.1
    (--) NVIDIA(0): Manufacturer                 : IVM
    (--) NVIDIA(0): Monitor Name                 : Iiyama
    (--) NVIDIA(0): Product ID                   : 6401
    (--) NVIDIA(0): 32-bit Serial Number         : 0
    (--) NVIDIA(0): Serial Number String         :
    (--) NVIDIA(0): Manufacture Date             : 2000, week 30
    (--) NVIDIA(0): DPMS Capabilities            : Standby Suspend Active Off
    (--) NVIDIA(0): Prefer first detailed timing : No
    (--) NVIDIA(0): Supports GTF                 : No
    (--) NVIDIA(0): Maximum Image Size           : 360mm x 270mm
    (--) NVIDIA(0): Valid HSync Range            : 31 kHz - 106 kHz
    (--) NVIDIA(0): Valid VRefresh Range         : 56 Hz - 85 Hz
    (--) NVIDIA(0): EDID maximum pixel clock     : 229.5 MHz
    (--) NVIDIA(0):
    (--) NVIDIA(0): Established Timings:
    (--) NVIDIA(0):   640  x 480  @ 60 Hz
    (--) NVIDIA(0):   640  x 480  @ 72 Hz
    (--) NVIDIA(0):   640  x 480  @ 75 Hz
    (--) NVIDIA(0):   800  x 600  @ 56 Hz
    (--) NVIDIA(0):   800  x 600  @ 60 Hz
    (--) NVIDIA(0):   800  x 600  @ 72 Hz
    (--) NVIDIA(0):   800  x 600  @ 75 Hz
    (--) NVIDIA(0):   1024 x 768  @ 60 Hz
    (--) NVIDIA(0):   1024 x 768  @ 70 Hz
    (--) NVIDIA(0):   1024 x 768  @ 75 Hz
    (--) NVIDIA(0):   1280 x 1024 @ 75 Hz
    (--) NVIDIA(0):
    (--) NVIDIA(0): Standard Timings:
    (--) NVIDIA(0):   1600 x 1200 @ 60 Hz
    (--) NVIDIA(0):   1600 x 1200 @ 70 Hz
    (--) NVIDIA(0):   1600 x 1200 @ 75 Hz
    (--) NVIDIA(0):   1600 x 1200 @ 85 Hz
    (--) NVIDIA(0):
    (--) NVIDIA(0): --- End of EDID for Iiyama (CRT-0) ---
    (--) NVIDIA(0):
    (II) NVIDIA(0): Frequency information for Iiyama (CRT-0):
    (II) NVIDIA(0):   HorizSync   : 31.000-106.000 kHz
    (II) NVIDIA(0):   VertRefresh : 56.000-85.000 Hz
    (II) NVIDIA(0):     (HorizSync from EDID)
    (II) NVIDIA(0):     (VertRefresh from EDID)
    (II) NVIDIA(0):
    (II) NVIDIA(0): --- Modes in ModePool for Iiyama (CRT-0) ---
    (II) NVIDIA(0): "nvidia-auto-select"   : 1024 x  768 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1920x1200"            : 1920 x 1200 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1920x1200_70"         : 1920 x 1200 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1920x1200_60"         : 1920 x 1200 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1856x1392"            : 1856 x 1392 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1856x1392_60"         : 1856 x 1392 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1792x1344"            : 1792 x 1344 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1792x1344_60"         : 1792 x 1344 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1680x1050"            : 1680 x 1050 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1680x1050_85"         : 1680 x 1050 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1680x1050_75"         : 1680 x 1050 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1680x1050_70"         : 1680 x 1050 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1680x1050_60"         : 1680 x 1050 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1600x1200"            : 1600 x 1200 @  85.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1200_85"         : 1600 x 1200 @  85.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1200_75"         : 1600 x 1200 @  75.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1200_70"         : 1600 x 1200 @  70.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1200_65"         : 1600 x 1200 @  65.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1600x1200_60"         : 1600 x 1200 @  60.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1600x1024"            : 1600 x 1024 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1600x1024_60"         : 1600 x 1024 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050"            : 1400 x 1050 @  85.3 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_85"         : 1400 x 1050 @  85.3 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_85_0"       : 1400 x 1050 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_75"         : 1400 x 1050 @  74.8 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_70"         : 1400 x 1050 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_70_0"       : 1400 x 1050 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1400x1050_60"         : 1400 x 1050 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x1024"            : 1280 x 1024 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x1024_85.00"      : 1280 x 1024 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_75.00"      : 1280 x 1024 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_60.00"      : 1280 x 1024 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_85_0"       : 1280 x 1024 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x1024_85"         : 1280 x 1024 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_75"         : 1280 x 1024 @  75.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1280x1024_75_0"       : 1280 x 1024 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x1024_60_0"       : 1280 x 1024 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x1024_60"         : 1280 x 1024 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1280x960"             : 1280 x  960 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x960_85"          : 1280 x  960 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x960_60"          : 1280 x  960 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1280x800"             : 1280 x  800 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x800_85"          : 1280 x  800 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x800_75"          : 1280 x  800 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x800_70"          : 1280 x  800 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x800d60"          : 1280 x  800 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "1280x800_60"          : 1280 x  800 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768"             : 1280 x  768 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768_85"          : 1280 x  768 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768_75"          : 1280 x  768 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768_70"          : 1280 x  768 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x768_60"          : 1280 x  768 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720"             : 1280 x  720 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720_85"          : 1280 x  720 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720_75"          : 1280 x  720 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720_70"          : 1280 x  720 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1280x720_60"          : 1280 x  720 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864"             : 1152 x  864 @  85.1 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_85.00"       : 1152 x  864 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_75.00"       : 1152 x  864 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_60.00"       : 1152 x  864 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_85_0"        : 1152 x  864 @  85.1 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_85"          : 1152 x  864 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_85_1"        : 1152 x  864 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_75_0"        : 1152 x  864 @  75.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1152x864_75"          : 1152 x  864 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_75_1"        : 1152 x  864 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_70"          : 1152 x  864 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1152x864_60"          : 1152 x  864 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1152x864_60_0"        : 1152 x  864 @  60.0 Hz  (from: X Server)
    (II) NVIDIA(0): "1024x768_85.00"       : 1024 x  768 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768"             : 1024 x  768 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1024x768_75.00"       : 1024 x  768 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768_60.00"       : 1024 x  768 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768_85"          : 1024 x  768 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768_85_0"        : 1024 x  768 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1024x768_75_1"        : 1024 x  768 @  75.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "1024x768_75"          : 1024 x  768 @  75.0 Hz  (from: EDID)
    (II) NVIDIA(0): "1024x768_75_0"        : 1024 x  768 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "1024x768_70"          : 1024 x  768 @  70.1 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1024x768d60"          : 1024 x  768 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "1024x768_60"          : 1024 x  768 @  60.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "1024x768_60_0"        : 1024 x  768 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "960x720"              :  960 x  720 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x720d60"           :  960 x  720 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600"              :  960 x  600 @  75.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600d75"           :  960 x  600 @  75.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600d73"           :  960 x  600 @  72.8 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600d70"           :  960 x  600 @  70.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "960x600d60"           :  960 x  600 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "928x696"              :  928 x  696 @  60.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "928x696d60"           :  928 x  696 @  60.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "896x672"              :  896 x  672 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "896x672d75"           :  896 x  672 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "896x672d60"           :  896 x  672 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "848x480"              :  848 x  480 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "848x480_85"           :  848 x  480 @  85.0 Hz  (from: X Server)
    (II) NVIDIA(0): "848x480_75"           :  848 x  480 @  75.0 Hz  (from: X Server)
    (II) NVIDIA(0): "848x480_70"           :  848 x  480 @  70.0 Hz  (from: X Server)
    (II) NVIDIA(0): "840x525"              :  840 x  525 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "840x525d85"           :  840 x  525 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "840x525d75"           :  840 x  525 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "840x525d70"           :  840 x  525 @  70.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "840x525d60"           :  840 x  525 @  60.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "832x624"              :  832 x  624 @  74.5 Hz  (from: X Server)
    (II) NVIDIA(0): "832x624_75"           :  832 x  624 @  74.5 Hz  (from: X Server)
    (II) NVIDIA(0): "800x600"              :  800 x  600 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "800x600_85.00"        :  800 x  600 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600_75.00"        :  800 x  600 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600_60.00"        :  800 x  600 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600_85_0"         :  800 x  600 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "800x600_85"           :  800 x  600 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600d85"           :  800 x  600 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600_75_0"         :  800 x  600 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600_75"           :  800 x  600 @  75.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "800x600d75"           :  800 x  600 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600_72"           :  800 x  600 @  72.2 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "800x600d70"           :  800 x  600 @  70.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600d65"           :  800 x  600 @  65.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600_60"           :  800 x  600 @  60.3 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "800x600_60_0"         :  800 x  600 @  60.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "800x600d60"           :  800 x  600 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x600_56"           :  800 x  600 @  56.2 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "800x512"              :  800 x  512 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "800x512d60"           :  800 x  512 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "720x400"              :  720 x  400 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "720x400_85"           :  720 x  400 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "700x525"              :  700 x  525 @  85.3 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d85"           :  700 x  525 @  85.3 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d85_0"         :  700 x  525 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d75"           :  700 x  525 @  74.8 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d70_0"         :  700 x  525 @  70.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d70"           :  700 x  525 @  70.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "700x525d60"           :  700 x  525 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x512"              :  640 x  512 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x512d85"           :  640 x  512 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x512d75"           :  640 x  512 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x512d60"           :  640 x  512 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x480"              :  640 x  480 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x480_85.00"        :  640 x  480 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "640x480_75.00"        :  640 x  480 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "640x480d85"           :  640 x  480 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x480_85_0"         :  640 x  480 @  85.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x480_85"           :  640 x  480 @  85.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "640x480_75"           :  640 x  480 @  75.0 Hz  (from: X Server, VESA, EDID)
    (II) NVIDIA(0): "640x480_75_0"         :  640 x  480 @  75.0 Hz  (from: Custom ModeLine)
    (II) NVIDIA(0): "640x480_73"           :  640 x  480 @  72.8 Hz  (from: EDID)
    (II) NVIDIA(0): "640x480_73_0"         :  640 x  480 @  72.8 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x480d60"           :  640 x  480 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x480_60_0"         :  640 x  480 @  60.0 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x480_60"           :  640 x  480 @  60.0 Hz  (from: EDID)
    (II) NVIDIA(0): "640x400"              :  640 x  400 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x400_85"           :  640 x  400 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x400d85"           :  640 x  400 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x400d75"           :  640 x  400 @  75.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x400d70"           :  640 x  400 @  70.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x400d60"           :  640 x  400 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384"              :  640 x  384 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384d85"           :  640 x  384 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384d75"           :  640 x  384 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384d70"           :  640 x  384 @  70.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x384d60"           :  640 x  384 @  60.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360"              :  640 x  360 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360d85"           :  640 x  360 @  85.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360d75"           :  640 x  360 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360d70"           :  640 x  360 @  70.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x360d60"           :  640 x  360 @  60.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "640x350"              :  640 x  350 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "640x350_85"           :  640 x  350 @  85.1 Hz  (from: X Server, VESA)
    (II) NVIDIA(0): "576x432"              :  576 x  432 @  85.2 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "576x432d85"           :  576 x  432 @  85.2 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "576x432d85_0"         :  576 x  432 @  85.1 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "576x432d75"           :  576 x  432 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0): "576x432d75_0"         :  576 x  432 @  75.0 Hz DoubleScan  (from: X Server)
    (II) NVIDIA(0

    It turns out it won't do any lower than 640x480. These are my changes:
    Modeline "800x600_85.00" 56.55 800 840 928 1056 600 601 604 630 -HSync +Vsync DoubleScan
    Modeline "800x600_75.00" 48.91 800 840 920 1040 600 601 604 627 -HSync +Vsync DoubleScan
    Modeline "800x600_60.00" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync DoubleScan
    Modeline "640x480_85.00" 35.71 640 672 736 832 480 481 484 505 -HSync +Vsync DoubleScan
    Modeline "640x480_75.00" 30.72 640 664 728 816 480 481 484 502 -HSync +Vsync DoubleScan
    Modeline "640x480_60.00" 23.86 640 656 720 800 480 481 484 497 -HSync +Vsync DoubleScan
    Modeline "320x240_60.00" 5.26 320 304 336 352 240 241 244 249 -HSync +Vsync DoubleScan
    Modeline "320x200_60.00" 4.19 320 304 328 336 200 201 204 208 -HSync +Vsync DoubleScan
    and
    Modes "1280x1024_85" "1280x1024_75" "1280x1024_60" "1152x864_85" "1152x864_75" "1152x864_60" "1024x768_85" "1024x768_75" "1024x768_60" "800x600_75" "800x600_60" "640x480_75" "640x480_60" "320x240_60" "320x200_60"
    I'm not sure if i did that doublescan thingy right, but it gets completely ignored.

  • Condition Type Values are in display mode during PO amendment

    Dear Friends,
    I have this issue in import PO.
    1. Process is we created an import PO with all necessary values filled under respective condition types to arrive at assessable value but Local freight cost is not known at this point since values are made clearer only after complete clearance of the goods from customs..
    2.MIRO for customs done
    3. PO amendment needs to be done to fill the values for the local freight & clearing but these condition types are in display mode.
    Pls kindly guide me as to what should be done in this case?
    thanks
    nandu

    Hi,
    Once you done the MIRO for customs duty, then all the Planned delivery costs will be captured during this MIRO, the condition type will be in display mode in PO.
    if you want to amend the PO with local frieght is either you need to reverse the MIRO captured otherwise you need to add the unplanned delivery costs during the MIRO for second time & can pay the same to the Local frieght vendors.
    rgds
    gsc

  • Profit Center Field (Display Mode) During Asset Postings

    We are using document splitting functionality with profit center mandatory for any kind of posting.
    Scenario-Asset purchase through PO:
    1.Purchase Order -created
    2.At goods receipt error is coming balancing filed is not filled (bcoz asset is not a material), for materials we are giving profit center. in the asset master i assigned cost center, still profit center is not deriving.
    Scenario-Asset Purchase from vendor
    purchasing asset directly from vendor through F-90, against asset line item we have to assign profit center. Cost center & profit center is coming in display mode. in the asset master i already maintained cost center, still profit is not deriving.
    I already done config for field status [asset account number (G067) andPosting Keys (70,75)]. I also checked note no.684659.
    how profit center will be derived for any kind of asset postings.
    Thanks
    Sai

    Hi
    Guess - Check settings in ACSET
    Thank You,

  • Tab in Tabstrip Control in display mode (Module Pool)

    Hi friends,
    I am trying to give authorization based on sy-uname, in runtime based on uname the particular tab should be opend in a display mode and some in change mode.  please help me out in this
    Edited by: shravan sonayila on Aug 12, 2008 8:06 AM

    Hi,
    when u creating tabstrip,while defining each tab in tabstrip , u have to
    create one subscreen for each tab.i think u want one tab for display
    mode and one tab for edit mode. if u want this way , in one tab try to
    give fields all in invisible mode this for display mode and goto second tab if u want all visible only keep like that only other wise u have create geoups.when u press enter ,groups will be change.it means visible , invisible modes.
    u have to give logic for screen in pbo.
    *&      Module  STATUS_0300  OUTPUT
          text
    module status_0300 output.
      set pf-status 'GUI_300'.
      set titlebar 'TITLE_300' with v_title.
      if i_aktyp = 'H'.
        if temp_flag = 1.
          loop at screen .
            if screen-group1 = 'GP2'.
              screen-input = 1.
              modify screen .
            else.
              screen-input = 0.
              modify screen.
            endif.
            temp_flag = 0.
          endloop.
        else.
          loop at screen.
            if screen-group1 = 'GP1'.
              screen-input = 1.
              modify screen.
            else.
              screen-input = 0.
              modify screen.
            endif.
            temp_flag = 1.
          endloop.
        endif.
      elseif i_aktyp = 'V'.
        loop at screen.
          if screen-group1 = 'GP1'.
            screen-input = 1.
            modify screen.
          else.
            screen-input = 0.
            modify screen.
          endif.
        endloop.
      endif.
    endmodule.                 " STATUS_0300  OUTPUT
    Try to give this logic.
    Regards,
    Ramya

  • Blurry fonts in iMac in Target Display Mode

    When I connect Macbook Pro retina with iMac using Thunderbolt to Thunderbolt cable, and use iMac in Target Display Mode the text and fonts are really blurry.
    It is the same text in Macbook:
    Text in iMac:
    The resolution of iMac display is "Best for display", however, I have tried to change it without any success.
    Does anyone has similar problem or anyone knows how to fix it? Thanks in advance!

    I have found an interesting regularity. If I open window (let's say PDF file) in Macbook Pro and drag it to iMac, then everything is okey. Unless I resize it. Once I resize it, it becomes blurry/smooth again.
    Why had this problem and how to fix it?
    Changing the resolution in Macbook Pro can help, but 1) I need to change the resolution in Macbook every time when I connect external monitor 2) I cannot resize windows in iMac 3) if I change resolution in Macbook Pro items become really small, so it is hard to see something.
    Please help!
    OS: OS X Yosemite 10.10
    Macbook: MacBook Pro (Retina, late 2013)

  • G/L Account Long Text Field in Display

    Dear Sir,
    I want G/L Account long text field be displayed along with G/L account number in G/L Account line item display report (FBL3N)
    I cheched the layout, the option of G/L account number is available but option of G/L account Long text is not available.
    Kindly guide me as to how can I do it?
    Regards
    Chirag Shah

    You must do some development for it.
    You can add additional field to FBL*N reports with using BTE exit.
    First of all, if you don't use BTE before, you must create a product on FIBF.
    Call FIBF transaction -> Settings -> Products -> ...of a customer
    Create a new line,
    Product: ZFI
    Text: BTE Products for FI Exit
    Product active: tick checks from activation.
    Then you must call SE11 for structure RFPOS.
    You must use append structure function for this structure and you can define ZFI_RFPOS append structure
    Define 4 fields.
    Component: KUNNR - Component type: KUNNR
    Component: NAMED - Component type: NAME1
    Component: LIFNR - Component type: LINFR
    Component: NAMEK - Component type: NAME1
    Then save and active your RFPOS structure.
    After that, you must do same step for structure RFPOSX.
    Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
    After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very important;
    E_POSTAB = I_POSTAB.
    Then you should add some ABAP code for getting customer & vendor details.
    I give you some examples, you can use it. (Next message on this thread, please check)
    Then save and active FM.
    Call FIBF transaction again.
    FIBF -> Settings -> Process Modules -> ...of a customer
    Define a new line.
    Process: 00001650
    Function Module: ZFI_INTERFACE_00001650
    Product: ZFI
    and this customizing.
    Then you go to SE38 transaction.
    start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
    After those operations, you can see customer/vendor code and their names on FBL3N.
    ABAP source example,
    TABLES : bseg, kna1, lfa1.
    IF sy-tcode = 'FBL3N'.
      CLEAR: bseg.
      SELECT SINGLE *
      FROM bseg
      WHERE bukrs = i_postab-bukrs
           AND belnr = i_postab-belnr
           AND gjahr = i_postab-gjahr
           AND koart = 'K'.
      IF sy-subrc EQ 0.
        e_postab-lifnr = bseg-lifnr.
        CLEAR: lfa1.
        SELECT SINGLE *
        FROM lfa1
        WHERE lifnr = bseg-lifnr.
        IF sy-subrc EQ 0.
          e_postab-namek = lfa1-name1.
        ENDIF.
      ENDIF.
      CLEAR : bseg.
      SELECT SINGLE *
      FROM bseg
      WHERE bukrs = i_postab-bukrs
           AND belnr = i_postab-belnr
           AND gjahr = i_postab-gjahr
           AND koart = 'D'.
      IF sy-subrc EQ 0.
        e_postab-kunnr = bseg-kunnr.
        CLEAR: kna1.
        SELECT SINGLE *
        FROM kna1
        WHERE kunnr = bseg-kunnr.
        IF sy-subrc EQ 0.
          e_postab-named = kna1-name1.
        ENDIF.
      ENDIF.
    ENDIF.

  • Baseline date should in display mode

    Hi all,
    Our client wants baseline date should be display mode only. Now users are changing the proposed baseline date so client wants this should be not changeable.
    Please help.
    regards,
    Azeem

    Go to SPRO --> Financial Accounting --> Financial Accounting (New) --> Document --> Rules for changing document --> Document Changes Rules, line item.
    In that go to field name BSEG-ZFBDT for account type D (customers), K (Vendors), etc as required. Double click on that field name and remove the tick "Field can be changed"
    This will solve your problem.

  • [SOLVED] Some colored text in urxvt displaying oddly

    Some colored text does not display correctly in the terminal - but not all. Here's a screenshot:
    http://i.imgur.com/xrzCR16l.png
    As you can see, the directory names displayed in blue and the executable files displayed in green (not sure why .vimrc is executable..) are all funky looking. However, my username and the regular file names are all displaying correctly. Also all the colored text in VIm in the terminal looks fine as well:
    I've read through the Font Config Wiki - Applications Without Fontconfig Support but none of the configs suggested:
    Xft.autohint: 0
    Xft.lcdfilter: lcddefault
    Xft.hintstyle: hintfull
    Xft.hinting: 1
    Xft.antialias: 1
    Xft.rgba: rgb
    in my .Xresources file change this behavior. Here is my full .Xresources file without the above settings, its not very long:
    ! special
    *.foreground: #e9ebee
    !#93a1a1
    *.background: #002b36
    *.cursorColor: #93a1a1
    ! black
    *.color0: #002b36
    *.color8: #657b83
    ! red
    *.color1: #dc322f
    *.color9: #dc322f
    ! green
    *.color2: #859900
    *.color10: #859900
    ! yellow
    *.color3: #b58900
    *.color11: #b58900
    ! blue
    *.color4: #268bd2
    *.color12: #268bd2
    ! magenta
    *.color5: #6c71c4
    *.color13: #6c71c4
    ! cyan
    *.color6: #2aa198
    *.color14: #2aa198
    ! white
    *.color7: #93a1a1
    *.color15: #fdf6e3
    URxvt*.transparent: true
    URxvt.shading: 100
    !URxvt.font: xft:DejaVu Sans Mono:pixelsize==14:antialias=false
    urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=9, \
    xft:WenQuanYi Bitmap Song:size=8, \
    xft:FreeSerif:style=Regular, \
    xft:unifont:style=Medium:antialias=false
    urxvt.scrollBar: false
    I would have thought that it has something to do with the colors being defined incorrectly, but the ".vimrc" file is using the same color as my username, and my username is behaving correctly. I'm at a loss and attempting to google "Font Problems in urxvt" gets topics where the the font is incorrect throughout the whole terminal, not just in particular places. Anyone know how to correct this?
    -- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
    Last edited by woodape (2015-04-16 18:36:08)

    Try defining your bold font explicitly:
    URxvt.boldFont: blah

Maybe you are looking for