TextView. Spaces of line truncated. Text is hAlign to the left side

Hi,
I have a text to show in a TextView.
The text in my internal table (string_table, soli_tab) or in a string is correct, has the correct format with spaces.
The problem is when the textView paints it. The whole text is hAlign to the left side without bearing the blanks in mind, Only simple spaces appear .
I have tried to modify the attribute condense of the properties(wdy_attribute_format_prop) of the node/attribute of the context, but it does not work.
The text appears this way:
26489 3.712,00 *Alquiler base 01.11.04-30.11.04
27772 241,71 *Tasa de Residuos Sólidos 2006
28008 1.219,11 *Importe gastos periodo: 01.01.2006 31.12.2006
28362 3.827,07 *Alquiler base 01.12.05-31.12.05
28797 3.712,00 *Alquiler base 01.12.04-31.12.04
30216 1.172,05 *Importe gastos periodo: 01.01.2005 31.12.2005
30656 186,95 *Importe gastos periodo: 01.01.2004 31.12.2004
100000339 1.219,11 *FRA.0000028008-Importe gastos periodo:
100000340 241,71 *FRA.0000027772-Tasa de Residuos Sólidos
100000341 3.976,32 *FRA.0000000439-Alquiler base 01.01.07-3
100000818 3.976,32- *Alquiler base 01.02.07-28.02.07
100000818 3.976,32 *Cont.post.alq.base haber 01.02.07-28.02.07
100000820 3.976,32- *FRA.0000000439-Alquiler base 01.01.07-3
100000820 241,71- *FRA.0000027772-Tasa de Residuos Sólidos
100000820 1.219,11- *FRA.0000028008-Importe gastos periodo:
120001523 6.400,00 *Fianza en metálico 01.10.2004
180000317 3.976,32- *Alquiler base 01.01.07-31.01.07
Have you some solution?
Thank you.
Tomás.

Hey Priya, thank you for the link..
did you understand the solution provided? - i did not.. and i was wondering if you did.
Because, how will adding another textview help.. and what is ALT+0164 option.
Thanks...

Similar Messages

How do I add space between lines of text in the same cell on Numbers 3.0.1

I just updated to Mavericks 10.9. In numbers, I used to be able to uncheck a box in the inspector that would make it so the Return key did not move to the next cell, but instead allowed me to add more space between lines of text in the same cell.
How can I do this in the new version of numbers?

HI ilb,
Numbers 3 is a complete rewrite of the application. This preference option hasn't (yet) been included, but N3 is very much a 'work in progress. A word to Apple via Provide Numbers Feedback asking to have this option included in Numbers 3 might be a useful step. You'll find Provide Numbers Feedback in the Numbers menu in Numbers.
Regards,
Barry

TS3276 When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

Would you post a screen shot of a message so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon. Copy and paste doesn't work.
Screen shots

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's mom

Sami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot.

My iPad keyboard divided in half with one side on the left side of the tablet, the other on the right side and an equal blank space separating them. The entire keyboard also became smaller. How can I get it back to normal?a

My iPad keyboard (spontaneously?) divided in half with one side on the left side of the tablet, the other on the right side and an equal blank space separating them. The entire keyboard also became smaller. How can I get it back to normal?

You can also turn OFF Split Keyboard
Settings>General>Keyboard>Split Keyboard>OFF

Have a new macbook pro and on the display there are 2 lines, one blue and one green on the left side. Does anyone know what the problem is. Happened after 2 weeks.

I just purchased a new macbook pro. Have had it about 2 weeks. Last night there were 2 thin lines that are on the left side of the desktop, 1 green and 1 blue from top to bottom. This happened after I added a printer. Anyone know what this is. Fearing that is a flaw in the screen.

Sounds like a hardware problem. You'll need to contact Apple ASAP. Since it's so new, hopefully they will just replace it rather than making you go through the repair process, but that's up to them.

MacBook has a bunch of lines on the left side of the screen.

Hello all, how are you doing?
Anyways to away from all the bullcrap, my MacBook is having issues with its screen and I really don't know what to do. I didn't use it for a few days when SimCity came in, and when I finally decided to use it, it had a bunch of lines in the screen that are quite annoying. For the most part I ignored the problem because at one point all I had to do was open and close it and the lines would go away, but now there not going away and as of yesterday my entire screen has been having problems. Like a few minutes ago the entire screen was going white so I closed it and it went away, but I just want to fix this now before my screen is completely broken. One thing that I did find out with my natural curosity or experminting to fix things was that if I bent the edge of the screen on the left side, the lines go away so hopefully that's telling somehow.
Any help will be appreciated and I'll post two pictures below.
http://farm8.staticflickr.com/7287/8723752843_c33d3607d6_z.jpg
http://farm8.staticflickr.com/7358/8724871130_6635ea8b7b_z.jpg

The screen or the graphic card are damaged. In your case, you have to take your MacBook to an Apple Store or reseller to have the computer repaired, because it's not a software-related issue

Little horizontal lines at the left side of the page, printed on the HP Laserjet 4 plus?

Folks, It seems that when I print to my HP laserjet 4 plus, I see some tiny horizontal lines on the left side of the printed page, spaced 4-5 inches apart, all at the very furthest left side of the page. Is this something that I can turn off? Are they some sort of binding marks? I am printing to this printer via jet direct card, over TCP/IP, from a Windows 7 64 bit PC. I love this printer, and recently changed out the exit assembly rollers, and now works like it was new. I also have a 500 sheet drawer and a duplexer installed on it, and I would like to figure out how to get rid of those little horizontal tick marks that show up on the left side of the page. Any help or assistance is GREATLY appreciated, Thanks so much in advance!

Hello @MattDillon , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Why is webpages I vist not fitting the screen. There is too much space on the left side and I cannot access my scroll bars.

Seems the pages I visit on the net are pushed more to the right, leaving too much space on the left side. Therefore, I cannot acccess the scroll down or across bars.

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Line on the left side of my screen

Hi, i have a 2.4ghz macbook white, it fell from me recently but before that i noticed an almost invisible line on the left side of my screen, it wasnt broken or anything, after it fell the line became more visible, it turned into green and sometimes two lines, but now it is a thick white line that can cover 1 letter...
i ran the hardware test and an error occurred 4SNS/1/40000000 TCOD-100.125
Thanks for your help

I had line(s) on my screen that would not go away and I only found one solution. Well, they would go away when I tried the Genius Bar (the only bar I hang out in these days). Anyhow, the lines were vertical 80%-90% of the time no matter what I was doing. Mostly one, sometimes 2, rarely 3. They even faded in and out when I was just sitting there! I took it to the apple store once and I couldn't show it to them. I took it home to see if it could get worse. Fearing it will eventually just fail as soona s my wrranty expires in teh end fo Feb, I took it in again. They are going to replace the logic board, but they have to order it then replace it; which takes a couple of weeks at least.
So, the only solution was to replace the board. Oh, and if you can't prove it to them because the iMac seems to know the "doctor's office", just take a photo of the screen problem and take it in. That will be evidence enough.
Applecare is great!

Scanned document has two lines horzonal on the left side of paper

My Unit is
HP Officejet 6210 All-in one
Only when i scan document it shows up with two lines on the left side of paper as it is scanned.
The first line 2inches from the edge the line is only 1/16 wide all the way cross the paper
The second line is 4 inches from the edge of paper and is 1/4 inch wide all the way cross the paper.
I have cleaned the glass and white backer of cover did not change.
I ran the Hp Print and scan doctor it recommend contact HP customer service.
The problem is not during normal
I have inspected the glass and small part of the feed cartiage. I did not know how to remove it to inspect better.
Can you tell me what is causing the line traces during scanning operation of my machine thank you

Hi @JamesI
Do these horizontal lines appear when you copy too? I ask because copy and scan use the same hardware components, if the issue occurs when you copy too there is indeed an issue with the printer hardware. If the issue does not occur when you copy, the problem is isolated to the software.
In any case, it seems you have done all of the hardware troubleshooting; Horizontal Lines on a Copy/Scan. If you determine the issue is a software problem with scanning alone, let me know and we can go from there.
If it is a hardware issue, you can try a couple of things in addition to what you have already done, but if the issue continues, I suggest calling us.
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
Let's perform a hard reset. To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in.
If the issue remains unresolved, and you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Safari (and Firefox) rendering huge spaces between lines of text.

I have a Mac user (a designer, a PC guy outside of work) who has somehow managed to screw up the rendering of text in Safari.
On his Mac in both Safari and Firefox when a couple of lines of text from a website should render as:
1st line of text.
2nd line of text.
Instead render as:
1st line of text.
2nd line of text.
Has anyone else seen this? Considering he also gets to mess around with his fonts since he a) uses suitcase, and b) is a designer, I am thinking he has either messed up his browser fonts, or possibly corrupted some of his system fonts by importing some of the very broken font/type sets which Windows allows to be used.
Once he takes off for the day I'll be able to figure out for sure what he's done, but in the mean time while he's trying to customize his Porche with a Lada engine I'm searching for similar experiences and solutions.
Thanks.

I'm having the same problem with the main apple home page with Safari --extra returns--and it's also happening with Complex HTML message in Entourage (Office 2004)--not all, just messages with tables. The html rendering engine for Entourage, I believe, is Safari. I've updated to the latest versions of Panther and Office and even changed fonts, thrown away preferences. I still have the extra returns.
Does anyone know if Safari is the html rendering engine for Entourage 2004? I know that Internet Explorer was the engine for Office X.
Does anyone have a suggestion to fix this?
Thanks,

When I use punctuation at the end of a line of text, it jumps to the front and vice versa?

This has been happening on and off for the past couple of months.
When I type a scentence that either begins or ends with any kind of punctuation, the punctuation jumps to the opposite side of the text.
ie. What's New? becomes ?What's New
Sometimes closing photoshop works to fix it, sometimes restarting my computer works, and sometimes it just stops on its own.
I end up having to creeate the punctuation in a seperate text layer and my layers end up a little messy.
I'm using Photoshop CS6. Any advice would be greatly appreciated!

I seem to have solved the problem, fingers crossed, but thank you for helping!
I'll post what I did here in case anyone happens upon this thread with the same problem.
Go to Edit > Preferences > Type - make sure 'Middle Eastern' is selected
If it's not selected, select it and restart photoshop. If it is selected, close preferences and move to the next step.
Go to Type > Lauguage Options - Select Middle Eastern Features
Go to your Paragraph Panel, and make sure this is selected:
That seems to be working for me.

I'm only getting the left side of items I call up so how do I get all the text onthe full screen

I cannot get the full text. The right side of the item doesn't show on my screen even when I pull item all the way to the left of the screen.

Reset the page zoom on pages that cause problems.
*View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

I did something that changed my viewing screen and cannot correct it. It ssems that my screen is too big for the monitor. Ihave a lot of blank space on the left side and cannot view my side slide bar on the right side-how can i adjust the screen

the viewing screen is off center -govong blanck space to the left and not allowing me see the slide bar on right

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

TextView. Spaces of line truncated. Text is hAlign to the left side

Similar Messages

Maybe you are looking for