TFR PO #'s from old system to SAP for references

Can someone please tell me if there is anyway you can tfr old PO #'s or IS #'s to SAP with converting the system which will help when looking for something?
Thank you in Advance
Monika

Hi,
You can upload all the old PO's using LSMW or CATT into SAP and will have to ensure that they are all marked as "Delivery Complete" and "Final Invoice". You could also mark them as 'deleted". Else they will remain outstanding.
Also note that these PO's will have no history (GR, Invoice etc).
Cheers !

Similar Messages

How to UNLOCK queues when data is migrated from legacy system to SAP syste

Hi All,
I need some help regarding queues (SMQ2). XI is been used to migrate data from legacy system to SAP system. Sometimes the queue is getting locked. Once the queue is unlocked then the message is processed correctly. So, the incoming queues must be "unlocked" routinely so that they can process through the system. There is a standard report RSQIWKEX available that can be scheduled in SAP system to automatically unlock the queues. Before using the standard report RSDIWKEX, we made sure that we have added parameter MONITOR QRFC_RESTART_ALLOWED set to "1" in Integration Engine specific configuration (TCODE SXMB_ADM).We are unable to analyze the reason for locking of queues and how to avoid it. If the locking of the queues can not be avoided, is there any way to unlock the queues? We tried executing this report but were not successful in unlocking the queues. Please guide us in solving this issue. It would be really helpful if you can give us a direction in solving this problem.
Thanks in Advance,
Shwetha.

Hi,
Just check if the Queues are registered in Transaction SMQR.
If its not, then register the Queue by pressing 'Register' Button
Sharif.

Transfer of GL a/cs manually from legacy system to SAP

How do you transfer GL a/cs manually from Legacy system to SAP, what offset a/c would you use. Also how would you open AR and AP transactions manually in SAP. Please help my email id is [email protected]
Thanks

Hi,
U can open one opening balance account.
Separate u r trial balance in following
gl account use key 40/5O GIVE NET EFECT TO OP BAL ACCT
Asset- use key 70 -75 GIVE NET EFECT TO OP BAL ACCT
Customer use key 01/11 GIVE NET EFECT TO OP BAL ACCT
Vendor use key 21/31 GIVE NET EFECT TO OP BAL ACCT
Material accts - this will be loaded thru mm and bal will go to initail entry acct revert one enrty from that to OP BAL ACCT
now u have uploaded all tb hence u r opening balance should be nil.
Warm Regards

This is regarding interface from legacy system to SAP

Hi All,
We have trasferred the one file from legacy system to SAP, and it was created a session in SM35, it contains 1000 errors.
we don't want correct those errors and these entries should be delated, could you please let me know are these errors can I see in any error table in SAP, is this facility is availbe in SAP or not?
becuase it isl very difficult to go and delete the entries one by one in sm35
Regards
Nama

Hi,
1) No updates will have been done for the items with errors.
2) Mark the Batch, then press F2 to call up the analysis. You can check here for the cause.
3) If you are not going to correct the items or the cause so as to post them, just delete the batch.
Kind regards

Data migration from legacy system to SAP

hi all,
could you please post some docs on migration from legacy system to SAP system., also the problems faced while migration and best practices in data migration
regards
sridharan

Hi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha

Upload data from legacy system to SAP through ALE IDOC

Hello All,
I have a requirement where i need to upload the data from legacy system to SAP. So i am using ALE IDOC.
In my requirement i need to extend the Standard IDOC. I have extended the IDOC and even found the exit for the updation of the extended fields to SAP. My data would be be placed in the application server.
Can anybody tell me how to retrieve the data and update in the tables for the extended fields.
Could you please provide a sample program for retrieving data for IDOC.
Thanks

Hi,
You can find the sample code in the following link.
Re: calling idoc_input_creditor
Regards
Sajid

BO DI for extracting data from legacy system to SAP BW 7.0

Hi,
Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
Please share your experience on such a landscpae or related documents any of you had come across.
Regards,
Pritesh

There are couple of them - Lawson ERP, Kalido, AS/400. ECC 5.0 might be there as well.
Regards,
Pritesh.
Edited by: pritesh prakash on Jun 14, 2010 2:00 PM

Uploading data from Legacy System to SAP (In PS Module)

While Implementing Project system Module, Whether LSMW is applicable for uploading data from Legacy sytem. If not, then what is the method used for uploading the data from Legacy sytsem to SAP

For creating/uploading the master data from legacy system to SAP we either use below options
1. BDC (recording)
2. BAPI
3. ALE iDoc.
I would sugguest you to use BAPI and there's already this post which explains few details about the BAPI:
Problems with BAPI_PROJECT_MAINTAIN
Regards
Sreenivas

Upload Opening balance of G/L accounts from legacy system to SAP, and also

Hi Gurus,
How to upload Opening balance of G/L accounts from legacy system to SAP, and also Vendor and Customer balance.
My Doubt is when you upload the customer balance and vendor balance will it effect the sundry debtor account and sundry creditor account if not the how will the sundry debtor account and sundry creditor account will be posted with the balance. Please send me the general entry passed for posting the same.
What I understood is that when we are uploading the customer and vendor balances through LSMW, no entry will be passed and it will update the customer and vendor sub ledger in FBL1N and FBL5N but it will not affect the sundry debtor account and sundry creditor account.
To give effect to sundry debtor account and sundry creditor account we need to manually pass a journal entry as follows.
1) Sundry debtors account A/c -
DR
      TO clearing account A/c
2)     clearing account A/c -
dr
     Sundry creditor account A/c
Please let me know whether iam correct
Also please tell me what will be the scenario for uploading of the assets balances through LSMW.
THANKS AND REGARDS
MV

Hi,
     When you uploading any data from legacy system to sap normally we will be using LSMW or BDC,thru this we will be uploading master data like G/L,vendor,Customer and asset master these are the some examples and we will upload transaction data also that is P&L Account and Balance sheet.When we do uploading data thru LSMW system will update all the values of vendor,customer and asset values as well as subsidary ledger also.No need to do manully.
Regards,
satya,
FICO

Loan upload from legacy system to SAP

Hi Experts,
I have a query regarding uploading Loan from legacy system to SAP.
We are implementing SAP HR for a client going live by 1st jun 2011. The scenario is the client has few employees who have taken loan for various reason, i have configured the same through SPRO....now my query is when i ask the client to provide me with loan data:
1. We are running payroll from 1st April 11, should i ask the client to give me the loan amount as the current standing loan amount
2. when i am uploading loan in 0045, should i put something in third tab payment
Thanks for your support.
Regards,
Jyoti

Hi,
This third tab basically create a record for info type 0078(Loan Payments). If you don't have any records in 3rd tab/0078, system will not start loan recovery in payroll.
Find the response for 2 scenarios-
Scenario 1 & Scenario 2:
maintain these fields in the table control of 3rd tab-
Date(GT_PAYM-ZAHLD) - 01.04.2011....Basically payments and repayments starts date also used for interest calculation
PmntTyp(GT_PAYM-ZAHLA) - 100(Loan payment (external)) ....Contains information on the direction and method of payment. Also control wage type generation in loan PCR and Functions
Amount(GT_PAYM-BETRG) - Balance Amount ....The total of payment or repayment amounts which you enter here, may not exceed the amount that you have entered in the Approved loan amount field on the Basic data tab page ....For your both of the scenariof, this amount will be same.
Regards.
Suman
Edited by: suman poddar on May 22, 2011 10:28 AM

I am trying to install Illustrator C6 on new system (Win8.1), Already de-activated from old system. I downloaded the 3 files. First file opened and had fonts, but second file (1.8Gb) does not open; does not appear to have an exe file. How do i install?

I am trying to install Illustrator C6 on new system (Win8.1), Already de-activated from old system. I downloaded the 3 files. First file opened and had fonts, but second file (1.8Gb) does not open; does not appear to have an exe file. How do i install?

what files (names and extensions) did you download?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How to take the data from sage system to sap r/3

hi expects,
how to take the data from sage system to sap r/3? which adapter is to be used?what is the format of data in sage system?how the scenarios will work ? please help me in solving this problem?

hi rohit,
the data transfer can be done by using SOAP adapter
do chk this link
http://www.sage.org/lists/sage-members-archive/2001/msg01718.html
http://www.sage.org/lists/sage-members-archive/2001/msg01739.html
thanx
Sampath

Data import from old system to new system, key by raw16 column

hi, experts,
now, I have a new system, the system design is to use raw(16) column as key column in all database tables.
of course, when new system goes live (in production), all new transaction records are written to new system database.
when the new system inserts new records, it handles itself to avoid conflicts by value of the raw(16) key column
I now face this issue:
I need to import data from old system to new system, I use sys_guid() to fill up the raw(16) column in new system database.
how can I avoid the conflict from value of raw(16) column between old system data and new system database data?
the sql I write is very simple:
insert into new_sys_table_a (key_column_raw_16, ..., ... )
select sys_guid(), old_sys_col_a, old_sys_col_b
from old_sys_table_a;

Manik wrote:
Hi,
Can you try this as a synch script (you can call so), sys_guid is a sequence, so just run through till u have sequence surpassing your old sequence. Give it a try.. I did not test it, but algorithm might be helpful for you.. Since when did sys_guid become a sequence that can be compared to other sys_guid's to know if it's been surpassed or not?
SQL> ed
Wrote file afiedt.buf
1 select sysguid
2        ,case when sysguid < lag(sysguid) over (order by lvl)
3              then 'Lower than previous'
4         else 'Higher than previous'
5         end as comparison
6 from (
7        select level as lvl, sys_guid() sysguid
8        from dual
9        connect by level <= 10
10*      )
SQL> /
SYSGUID                          COMPARISON
BBF16F0B5B8946F59FE0FEE0FE35729B Higher than previous
A6E63DDA4E4342E5A8AAD267FE44A7AF Lower than previous
8632B901474A468C98D7B4020590CBD9 Lower than previous
36012FD6FA764520B77CF1E06830F2DC Lower than previous
E35F3455C24444C0991EB62BE7431463 Higher than previous
A5E5CDBD164A4DB8966E85B5BF4C5C1A Lower than previous
7A0FFBC6221348A5BDF4858D05876201 Lower than previous
A9EF3B5EFFB74C4FA74E1C45186510AA Higher than previous
806839AE5AE04D3998BA5DEBA84AD05C Lower than previous
F0B235376A4045D7A644345E7FAF0FF4 Higher than previous
10 rows selected.Doesn't look like much of a sequence to me

What are ways to transfer data from online system to SAP

Hi all,
We have a requirement to transfer data from an online system (Non SAP) to SAP.
What are all the possible ways to do that and which one is preferred?
Thanks!
Rahul.

Dear
for transferring data from online system to SAP there are different ways follow this links
http://searchsap.techtarget.com/answer/Using-IDocs-to-connect-a-non-SAP-system-to-an-SAP-R-3-system-online
https://help.sap.com/saphelp_nw70ehp1/helpdata/en/c7/eff2280d0511d3a6300060087832f8/content.htm
Regards

How to read some images from file system with webdynpro for abap?

Hi,experts,
I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
How to read some images from file system with webdynpro for abap?
Thanks a lot!

Hello Tao,
The parameter
icm/HTTP/file_access_<xx>
may help you to access the pictures without any db-access.
The following two links may help you to understand the other possibilities as well.
The threads are covering BSP, but it should be useful for WebDynpro as well.
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
Best regards
Christian

TFR PO #'s from old system to SAP for references

Similar Messages

Maybe you are looking for