TFS 2010 Support for SQL 2008 R2 SP3

Does TFS 2010 support SP3 on SQL 2008 R2?
Based on this link only SP2 is supported.
http://msdn.microsoft.com/en-us/library/vstudio/dd631889%28v=vs.110%29.aspx
Thanks

Hi Aravind100,
Thanks for your post.
As far as I know SQL Server 2008 R2 SP3 support TFS 2010. I think that document has not been updated after SQL Server 2008 R2 SP3 released.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2

The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
thanks,
Tony DeStefanis
Column5 Consulting

Hi,
we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
we are developping our application-set and for the moment we have no problem.
regards
massimo

SQL 2008 R2 SP3 ugrade failure

SQL 2008 R2 SP3 upgrade failure Current Version: Microsoft SQL Server 2008 R2 (SP2) - 10.50.4305.0 (X64) Apr 3 2014 17:55:58 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <x64>(Build 7601: Service Pack 1) (Hypervisor)
Exit code : 325526488 Exit acility code: 871 Exit error code: 9176
Could not find any resources for the specified culture or the neutral culture. Make sure "Errors.resources" was correctly embedded or linked into assembly "Microsoft.SqlServer.Discovery" at compile time, or that all the satellite assemblies
required are loadable and fully signed.
</x64> Please advise.

Hello,
SQL Server setup is trying to find the SQLSysClrTypes_Cpu64 MSI package on the C:\Windows\Installer\257f1f.msi path. I
found the following line on the file you submitted:
Package SQLSysClrTypes_Cpu64: - The path of cached MSI package is: C:\Windows\Installer\257f1f.msi
Try copying the MSI from a SQL Server 2008 R2 RTM media and name it 257f1f.msi or use the FindSQLInstalls.vbs script on the following article to copy the file for you. Put the SQL Server 2008 R2 RTM media on the same place where it was when you installed the
instance before running the script.
http://support.microsoft.com/kb/969052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SharePoint 2010 list to SQL 2008 table

I would like export the data from SharePoint 2010 list to SQL 2008 table.
At work we don't have SQL integration Services.
What is the best way to export the data without copying and paste into the table?
Any help will be appreciated.
simam

Follow the article for step by step web part creation in SP 2010.
http://www.codeproject.com/Articles/136857/Developing-Web-Parts-for-Sharepoint-2010
http://msdn.microsoft.com/en-us/library/ms415817(v=office.14).aspx
You use GetDataTable method to get the datatable from SPListItemCollection.
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.splistitemcollection.getdatatable.aspx
Amit

Where is the management Studio for SQL 2008 Express?

Can anyone point me to where I can download the management studio for SQL 2008 Express.
I've downloaded and installed SQL 2008 Express without problem but can't find the management studio.
Help.

Paradox1 said:
The 2008 version of the Management Studio is not a stand alone installation and can only be installed as part of the SQL Server 2008 Express with Tools or Advanced installation.
Like many others, I spent countless hours trying to figure out how to install the Management Studio for SQL Server 2008 Express - Advanced installation (same should apply to the w/ Tools version). What happened in my case was that I installed Visual Studio 2008 Express and during that process a stripped down "Instance" of SQL Server 2008 was installed that did not include the Management Studio. Through much pain and torture I learned that the Management Studio can only be installed during installation of the first instance. To delete that first instance, you must go to "Add or Remove Programs" and remove "Microsoft SQL Server 2008". The removal process will only remove one instance at a time and if you have installed more than one instance you need to keep going until all instances have been removed and the application completely disappears from the Add or Remove Programs" dialog. Note: You do not need to uninstall any of the other SQL Server 2008 applications that also appear in the "Add or Remove Programs" dialog. Then go back through the install process as follows: Double click on SQLEXPRADV_x86_ENU.exe to load the SQL Server Installation Center and then go to Installation > New SQL Server stand-alone installation. Then proceed through all of the installation steps until you get to “Feature Selection” and click on “Select All” to toggle on all of the Shared Features, which should include Management Tools - Basic.Continue the process from there and you should be good to go. Hopefully this will help others to avoid much of the pain that many of us have already experienced.

SQL 2014 license for SQL 2008

Hi,
I'm purchasing SQL 2014 license.
Can I use the SQL 2014 license for SQL 2008 or 2012.
Thanks,
Sathish
Sathish

Hi Sathish,
For more detailed information regarding to the license issue, please call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the
Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
Regards,
Elvis Long
TechNet Community Support

Change installation directory for SQL 2008 SP3 or CU

My C drive is full, Server built long time ago. Not enough space available in C Drive but other local drive have storage.
Is there anywhere i can use my other drive for patching or apply CU.
Env: win 2003 ,SQL 2008 SP1

My C drive is full, Server built long time ago. Not enough space available in C Drive but other local drive have storage.
Is there anywhere i can use my other drive for patching or apply CU.
Env: win 2003 ,SQL 2008 SP1
Hi,
Why dont you move SQL server user data file and log file from C drive to other drives this will create space. It would require a SQL Server restart
Refer this link
http://msdn.microsoft.com/en-GB/library/ms189133%28v=sql.100%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

JDBC 1.2 for SQL 2008

Hi Gurus,
I searched in SAP Marketplace and saw that the JDBC adapter 1.2 posted there is for SQL 2005 server only. May I know where I can download a JDBC 1.2 adapter for the 2008 SQL server? I'm working with XI 7.0.
Thanks all.
Regards,
SAPenthusiast

Hello,
Check these notes:
Note 639702 - JDBC Driver for Microsoft SQL Server
Note 1600699 - Microsoft jdbc driver 1.2 support
I think you can just use the JDBC 1.2 that appears for download in SQL Server 2005. Check http://msdn.microsoft.com/en-us/sqlserver/aa937724 for example. The same driver is used to connect different DB versions.
Cheers,
Diego.

Any known issues with SCOM 2007 R2 after upgrading to SP2 for SQL 2008 R2 ?

Are there any known or reported issues in SCOM 2007 R2 after installing SP2 for SQL server 2008 R2 ? Currently running RTM version of SQL Server 2008 R2.

Hi There,
As a testing purpose long time back i did this. I did this step by step
I installed SCOM 2007R2 with SQL server 2008 with SP1 initially.
Then upgraded to 2008 SP2.
Then upgraded to 2008 SP3
Then upgraded to 2008 R2.
Then upgraded to 2008 R2 SP1
Finally to SP2
I dint find any issue.
I just kept on adding service packs upon each other. Except for upgradation to 2008 to 2008 r2 i used the installation media then the SP1 & SP2 files. to upgrade to service packs.
If you want to go to directly SP2 i would suggest you install SP1 and then install SP2.
Every thing is fine in the LAB equipment i tried this.
Gautam.75801

Support for SQL Server 2014 for CMS + Audit Repository?

We are currently on BusinessObjects 4.1 SP01 Patch 6 on Windows Server 2008 using SQL Server 2008 R2 for our CMS and Audit repository databases. Is there any information out in regard to when SQL Server 2014 will be supported for the CMS and Audit repositories?
According to the Product Availability Matrix shown in the screenshot below SQL Server 2012 is supported, right? One of our DBAs claims there isn't that much of a difference between SQL Server 2012 and 2014, but I am not willing to try it if it isn't officially supported.
Thanks,
Noel

Denis Konovalov Henry Banks James Rapp Toby Johnston
Need your attention here.

Windows 7 support for Xcelsius 2008

Hi,
This is to inform that Windows 7 is currently not supported on Xcelsius 2008 SP3.
There are however discussions to be available in the next release.
Best regards,
Jenni Jacob

Hi Jenni,
It's working fine for me on Win7.
You may want to use the XP Compatibilty mode (standard in Win7) or "install/run as administrator".
Regards,
Thijs

Oracle 10.2.0.3 support for Win 2008

I'm trying to install oralce 10.2.0.1 and patch it to 10.2.0.3 on windows 2008 server.
But when I try to launch the installer I get this error:
Abnormal program termination. An internal error has occured. Please provide the following files to Oralce support:
"Unknown"
"Unknown"
"Unknown"
I checked the metalink site and it looks that 2008 AMD64b is supported but not sure if this is for 10r2 or 11.
Is ora10gr2 supported on windows 2008?
What could be the installation problem? How could I address it?
Thanks a lot, Tom

Think It's not certified, but
for your installation issue look for Vista Certification and download Patch
p5860454_10201_WINNT.zip
This at least helps you with the installation
Ragards
Uwe

Performance Point 2010 Support for Analysis Services 2012

Can someone tell if me Analysis Services 2012 is support for PerformancePoint 2010 (SharePoint Server 2010). Could not find a definite answer when I search the web.
Thanks,
Don

Yes, you need to install the right ADOMD client and OLEDB Provider on SharePoint servers.
Install the Analysis Services OLE DB Provider on SharePoint Servers
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

Security Update for SQL Server 2005 SP3 (KB2494113) failed

Here is the Error, Can't get the update install, please help.
KB Number: KB2494113
Machine: MJA01
OS Version: Server 4.0 Service Pack 1 (Build 7601)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 3
Package Version: 4060
Command-line parameters specified:
Cluster Installation: No
Prerequisites Check & Status
SQLSupport: Passed
Products Detected Language Level Patch Level Platform Edition
SQL Server Database Services 2005 (BKUPEXEC) ENU SP3 2005.090.4035.00 x86 EXPRESS
SQL Server Tools and Workstation Components 2005 ENU SP2 9.2.3042 x86 EXPRESS
Products Disqualified & Reason
Product Reason
SQL Server Tools and Workstation Components 2005 The product instance SQL Tools does not have prerequisite update 4035 installed. Update 4060 is dependent on prerequisite update 4035. Exit setup and refer to the Knowledge Base article to find the prerequisite
patch. Install the prerequisite and rerun the installation.
Processes Locking Files
Process Name Feature Type User Name PID
Product Installation Status
Product : SQL Server Database Services 2005 (BKUPEXEC)
Product Version (Previous): 4035
Product Version (Final) :
Status : Failure
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log
SQL Express Features :
Error Number : 29528
Error Description : MSP Error: 29528 The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Product : SQL Server Tools and Workstation Components 2005
Product Version (Previous): 3042
Product Version (Final) :
Status : NA
Log File :
SQL Express Features :
Error Description : The product instance SQL Tools does not have prerequisite update 4035 installed. Update 4060 is dependent on prerequisite update 4035. Exit setup and refer to the Knowledge Base article to find the prerequisite
patch. Install the prerequisite and rerun the installation.
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29528

Hi Bhanu,
I have uninstall the SQL Server Tools and Workstation Components 2005.
But still unable to upg the SQL Server with the KB249411. Any more ideas?
This is the Summary log.
Time: 09/10/2014 11:09:48.218
KB Number: KB2494113
Machine: MJA01
OS Version: Server 4.0 Service Pack 1 (Build 7601)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 3
Package Version: 4060
Command-line parameters specified:
Cluster Installation: No
Prerequisites Check & Status
SQLSupport: Passed
Products Detected Language Level Patch Level Platform Edition
SQL Server Database Services 2005 (BKUPEXEC) ENU SP3 2005.090.4035.00 x86 EXPRESS
Products Disqualified & Reason
Product Reason
Processes Locking Files
Process Name Feature Type User Name PID
Product Installation Status
Product : SQL Server Database Services 2005 (BKUPEXEC)
Product Version (Previous): 4035
Product Version (Final) :
Status : Failure
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log
SQL Express Features :
Error Number : 29528
Error Description : MSP Error: 29528 The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29528
Here is what is log in the SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log
Property(S): CommonFilesFolder.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:\Program Files (x86)\Common Files\
MSI (s) (B8:F0) [11:09:39:826]: Product: Microsoft SQL Server 2005 Express Edition - Update 'GDR 4060 for SQL Server Database Services 2005 ENU (KB2494113)' could not be installed. Error code 1603. Additional information is available in the log file C:\Program
Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log.
MSI (s) (B8:F0) [11:09:39:827]: Windows Installer installed an update. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.3.4035.00. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: GDR 4060 for SQL Server Database
Services 2005 ENU (KB2494113). Installation success or error status: 1603.
MSI (s) (B8:F0) [11:09:39:828]: Note: 1: 1729
MSI (s) (B8:F0) [11:09:39:828]: Product: Microsoft SQL Server 2005 Express Edition -- Configuration failed.
MSI (s) (B8:F0) [11:09:39:829]: Windows Installer reconfigured the product. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.3.4035.00. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error
status: 1603.
MSI (s) (B8:F0) [11:09:39:829]: Attempting to delete file C:\Windows\Installer\63906e.msp
MSI (s) (B8:F0) [11:09:39:829]: Unable to delete the file. LastError = 32
MSI (s) (B8:F0) [11:09:40:092]: Deferring clean up of packages/files, if any exist
MSI (s) (B8:F0) [11:09:40:092]: Attempting to delete file C:\Windows\Installer\63906e.msp
MSI (s) (B8:F0) [11:09:40:094]: MainEngineThread is returning 1603
MSI (s) (B8:6C) [11:09:40:097]: RESTART MANAGER: Session closed.
MSI (s) (B8:6C) [11:09:40:097]: No System Restore sequence number for this installation.
=== Logging stopped: 9/10/2014 11:09:39 ===
MSI (s) (B8:6C) [11:09:40:098]: User policy value 'DisableRollback' is 0
MSI (s) (B8:6C) [11:09:40:098]: Machine policy value 'DisableRollback' is 0
MSI (s) (B8:6C) [11:09:40:098]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (B8:6C) [11:09:40:099]: Restoring environment variables
MSI (s) (B8:6C) [11:09:40:099]: Destroying RemoteAPI object.
MSI (s) (B8:30) [11:09:40:099]: Custom Action Manager thread ending.
MSI (c) (FC:60) [11:09:40:100]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (FC:60) [11:09:40:101]: MainEngineThread is returning 1603
Thanks,
Alice

TFS 2010 Support for SQL 2008 R2 SP3

Similar Messages

Maybe you are looking for