TFS Group not updating in Release Manager

I have a bunch of release paths and plans tied to a development group with security for those plans defined by TFS Groups managed by the development team. They recently had a new hire start and added him to their TFS groups but the developer can't
access their release plans in Release Manager. I checked the groups he was added to in TFS in Release Manager and they don't have him listed. I verified that the developer is a member of those TFS Groups via the team's project site. I can't delete
the group and re-add it since it is part of multiple release paths and plans so, short of detaching the group from TFS and adding the user in Release Manager, I can't find a way to get the group to update in Release Manager. Any ideas?

Hi Coding4ever,
Thanks for your reply.
I reproduced this scenario in my RM 2013 Update 4 Client, and received the same result. For this issue, you can try this workaround: open that TFS group in RM Client, click
Detach From TFS button, then click Delete button delete this TFS group from RM Client, then click
New>>New From TFS to re-add this TFS group into your RM Client.
For this TFS group updated users not show in RM Client issue, please
submit it to Microsoft Connect Feedback portal at: https://connect.microsoft.com/VisualStudio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Exchange Distribution Groups not updating in Active Directory

Hi all,
I'm not sure if this is intended behaviour or not, but any distribution group we create in Exchange ECP does not update in Active Directory Users and Computers. Any particular reason why?
For example, we have a user group called "Managers" and we've recently created a new group called Area Managers. We've since moved some people out of Managers and put them in Area Managers, however in Active Directory all we see is the Managers
group with all the old managers in there. The OU for the Area Managers group has been set correctly.
Best regards,
Please remember to mark the replies as helpful if they help, or as answers if they answer your question. Please also unmark the answers if they provide no help.
Zach Roberts
Independent Microsoft Community Support Advisor
Disclaimer: I don't work for Microsoft. Any advice given is my own and does not represent Microsoft.
Follow me on Twitter:
@WindowsZach

Hi,
Please run the following command to confirm the members of two groups.
Get-DistributionGroupMember -Identity Area Managers
Get-DistributionGroupMember -Identity Managers
I also suggest to remove the member from “Managers” in AD then check the members of “Managers” in EAC to check this problem.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Standard Structure Not Updating (S114) Fleet Management

Hi...
We are implmenting the Fleet Management . I did the following configuration setting
1) Created view profile and assign with fleet object type.
2) Define the Consuamable type, Engine Type .
3) Setting done for unit of measurement for monitoring of consumption.
4) Dfined special measuring position for fleet objects.
5) Defined calculation method for fleet consumption methods.
6) Created gas station locatin.
7) Setting done for consumption relevent counter reading update.
After that I have created fleet as a equipment. After that I am posting the fuel in IFCU transaction. Now I am facing one problem that distance data is updating in MCIZ transaction but Fuel Volume data is not updating in the MCIZ report. In the PMIS stting, the key figure "IAMENFLVOL" reference indicator is "A" (Key Figure to be updated).
Can anybody help me to solve this problem
Thanks in advance.
Regards
Pramod

Hi,
Check this link:
[Fleet Management|http://www.nd-solutions.com/pdfs/white_EAM/EAM_ConfiguringFleetMgt.pdf]
This link has all the steps with screen shots.
Also check SAP Note: 563832.
Hopefully this will resolve your issue.
Thanks,
Amit.
Edited by: Amit Saxena on Oct 23, 2008 10:12 PM

Office365 Exchange Security Group not updating in Sharepoint Online

We have created a new Office365 Exchange Security Group that contains several other Exchange Security Groups. This group will not show up in either the SharePoint Web admin or SharePoint Designer views.
How can I force SharePoint to re-synchronize the Office365 Tenant users/groups?

Hi,
According to your post, my understanding is that Office365 Exchange Security Group does not updating in Sharepoint Online.
How long did you wait after creating the Group to see if they show up in SharePoint Online? The back-end replication can take some time, even days from my experience.
Here is a similar thread for your reference:
http://community.office365.com/en-us/f/156/t/173994.aspx
More information:
CIAOPS: Using Office 365 security groups with SharePoint Online
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

BOXI R2 SP4 (FP 4.1) Windows AD Groups not updating

I just patched my BO XI R2 server to service pack 4 and applied fix pack 4.1. I am having an issue where my Windows AD groups are not updating correctly. When I log into the CMC and go to users, click on an account name and then click on the "Member of" tab, I don't see the Windows AD groups that the user belongs to. However, when I go to "Groups", click on the group name that the user is supposed to belong to and then click on "Users", I see the user's account name/login. Has anyone else seen this problem? I have tried the following:
- remove the user from the Windows AD group using Active Directory Users & Groups and adding them back in
- adding the user into a new Windows AD group and import that AD group
This is currently a pretty big problem for me so if anyone has any insight into how to fix this, I would greatly appreciate it. Thanks so much.
David Tjen
Art.com

Hi Glen,
It is expected that if changes are made in AD (that don't remove a user from all groups) will not be instant on the CMS. When you go to a group and click on the members/users tab. You will be prompted that this query may take some time. This action sends a live query to AD and therefore should be up to date. When you click on a user and try to view the groups for which they are a member this is not a live query but rather accesses a graph that the CMS maintains in memory. This graph is set to refresh every 15 minutes by default so there should at least be a 15 minute delay. Then the time to update the graph can vary as well. If you have 1 groups it should take a few seconds, but if you have 1000's of groups or many nested groups it could take much longer. To initiate this process you can hit update in the CMC\auth\AD or restart the CMS. If you find that this is not how the system is working, then it is best to open a message with support. These cases can be quite involved and usually require considerable CMS tracing and maybe packet scanning to resolve.
Hope this explains things....
Regards,
Tim

Supplier Directory not updated with Released status after the trasnfer

Hello Experts,
I need your help to resolve an issue.
We are implementing SRM 5.0 with ROS Client and EBP Client in place to manage Supplier Self REgistration and EBP.
When I trasnfer an accepted Supplier from ROS Client to EBP Client via OPI to create a Bidder in EBP and then extend the transferred supplier to Vendor status, I am able to see the ROS relationship established in the Vendor tab. But the Supplier still exist in Supplier directory. According to documentation, the status of supplier in ROS client will be automatically set to released and based in the status in EBP, the supplier status will be updated in the ROS - supplier directory.
Also I tried to convert the supplier to Vendor(instead of Bidder) and maintained all the appropriate fields. But still the problem exists.
Please let me know
1. Do I need to initiate any workflow for this?
2. Is the any notes to correct the issue?
3. Is there any config related to this?
Regards.
Vijay

Hi Vijay
ROS BP status is set to 'Released' only when you use SUS.
1) When you create vendor in EBP from ROS, check PORTAL Vendor
2) You should have mapped relevant XI mappings to transfer vendor from EBP to SUS.
When a Portal vendor is ticked and BP is saved in EBP, a XML message is generated and sent to SUS to create BP .
This XML message also updates the status in ROS to 'Released'.
Best regards
Ramki

Address book groups not updated in iSync and iTunes-iPod-info sync

Changes to address book groups are not reflected in iSync and iTunes. I.e. if I remove a group or add a group it is still the old list of groups that is listed in iSync and iTunes available for syncing with my phone or iPod. How do I get these list to be updated and reflect the present list in Address Book?

The suggested resolution essentially said "delete the address book and start over."
Ok, I can see how this will help but... a few questions:
1. How to I re-load the address book with my 500+ contacts without loosing my groups and all the data? The suggestion in the other discussion doesn't give any guidance on this
2. What caused the problem to begin with? In other words, how can I prevent it from happening again?
I discovered the syncing problem about the time I did the following three things:
1. Upgraded to 10.5.2
2. Upgraded my iPhone (and iTunes) to 1.1.4
3. Installed Bento (possibly a red herring) -- but it DOES connect to address book

I can not update the extension manager

the panel of extension manager in dreamweare said theis an update but not exist. my version is 0.9.3. my sytem is osx 10.8.2. Why?

We posted an update to the panel on March 14th. You also need to update Extension Manager to 6.0.5, it available from Adobe Application Manager (Updates) or download it fromt he Web here:
http://www.adobe.com/exchange/em_download/
I hope that helps.

Group not updating.

I am using the csutil -i command to complete an update and move users from one group to another. The text file has the UPDATE:<user name>:PROFILE:7 syntax and works great as far as you can see on the ACS GUI. However, when you run a csutil -d, the user maintains it original group. So, if it was in group5 and you updated so it would go to group7, the dump.txt would still say group5. Now, if you look at the user that was suppose to be updated, it has switched groups from group5 to group7. And if you click submit and then do a csutil -d, you will see that the group has now changed from group5 to group7. Is there a way to do a global submit on users in a group? I have done submit and restarts all over the place and that does not work. Any ideas? Thanks

As far as I know, you cannot do a global submit on users in a group

Dynamic Group not updating Workstations

Hello NG
In our environment i created a simple dynamic workstation group.
Unfortunatelly the group will not be updated with the machines that are in
the device list. Only if I touch the rule the machines are imported. I have
to change nothing! Only cklick apply and then the policies are associated to
this dynamic group.
Why this? What could be cause of this issue?
Thanks in advance for your help
Ramon

Dynamic Groups are normally updated once daily, during the overnight hours.
On 4/27/2011 11:21 AM, Ramon Lustrati wrote:
> Hello NG
>
> In our environment i created a simple dynamic workstation group.
> Unfortunatelly the group will not be updated with the machines that are
> in the device list. Only if I touch the rule the machines are imported.
> I have to change nothing! Only cklick apply and then the policies are
> associated to this dynamic group.
>
> Why this? What could be cause of this issue?
>
> Thanks in advance for your help
>
> Ramon
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Contact Groups not updating

So I recently set up a few groups of contacts in my MobileMe account. The usual friends, family, businesses, etc. I had "push" set to on and the next day I checked my contact groups on my phone. I could see the groups listed, but when I opened any group, it was a blank list.
I double checked that I had properly set up the contact groups in my MobileMe account and found that they are still setup properly.
So my question is does anyone know why I'm getting the newly created groups pushed to my phone without any of the contacts that should be included listed?

There is an easier fix for this than creating a dummy contact. You just need to refresh the Mobile Me account on your iPhone. Follow these steps to do so and all of the contacts you put in the groups on MobileMe will show up on your phone.
1. On Iphone go to "Settings"
2. In settings, go to "Mail, Contacts, Calendars"
3. Under the Accounts, select your MobileMe Account
4. Turn the Contacts button to "Off". You will get a pop up stating "Synced Contacts will be removed from your iPhone". Click the "Stop Syncing" button. This will remove all your MobileMe Contact data from your iPhone. When you select the button you will see a window with a spinning icon stating "Turning of Syncing". Wait for this to finish.
5. Once Syncing has been turned off. Turn it back on again.
6. Hit the home button to exit the settings.
7. Open up the Contacts application. When you first open it, there will be no contact data, but the network activity indicator will be spinning. The phone is downloading all the MobileMe data again.
8. Once it is done, you will see all the contacts (but the group button will be missing). Hit the home button again to exit the app.
9. Open the Contacts app again. The Groups button will appear. Click on the group you created and you will see all the contacts you added on MobileMe for that group.
It looks like every time you add a new group you will need to do this. But if you only add a new contact to an existing group, it will update on the iPhone with no problem.

BPC 7.5 - Domain User Group Not Work - Configuration Server Manager

Hi Guys,
I install BPC 7.5 from NW. From the PC client only work ok with the same user OWNER the BPC .NET. In Server Manger -> Option
-> Define Systems User Group, add the follow data:
- System user group name= Domain Users
- Domain Type=Active Directory
- Domain Name = BAIRES
Is correct the Syntax? or need use the form OU=xxxx?
Thanks.

Ok, thanks, and So I have other problem. I need Add User from different Domains, How configure this?
Tks

Release Management & Reporting

In looking at the reports provided in TFS, I’m having trouble finding anything Release Management specific. It would be helpful for our auditors if I could provide reports based on the data shown in the Release Manager client. For example, the Releases tab
shows the list of releases based on the filter applied, with information on the release template used, which build is being deployed, the stage, who created it and on what date it was released. Does anyone know of the reports available in TFS for Release Management,
or will I need to build my own.
Thanks!

Hi Mike,
Thanks for your post.
As far as I know current TFS Server Report not support such Release Management reports.
For this scenario, please submit it to User Voice site at:
http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error in TFS Release Management Server after Upgrading to Update 3

Some weird and unexplained error logged in InRelease aka (Release Management) server event log after upgrading Release Management Update 1 to update 3.
Below error started getting logged only after upgrading to Update 3.
Even though we started the Inrelease Server and all agents but no luck.
Any immediate help would be much helpful.
----------------------------------- EVENT LOG ERROR ------------------------------------
Timestamp: 12/15/2014 10:22:18 AM
Message: 'LambdaValue>' is not of type 'ServerActivity'. When loading this instance you must ensure that the activity with name 'LambdaValue>' implements
'ServerActivity'.: \r\n\r\n at
System.Activities.ActivityInstance.System.Activities.Runtime.ActivityInstanceMap.IActivityReference.Load(Activity activity, ActivityInstanceMap instanceMap) at System.Activities.Runtime.ActivityInstanceMap.InstanceList.Load(Activity activity, ActivityInstanceMap
instanceMap) at System.Activities.Runtime.ActivityInstanceMap.LoadActivityTree(Activity rootActivity, ActivityInstance rootInstance, List1
secondaryRootInstances, ActivityExecutor executor) at System.Activities.Runtime.ActivityExecutor.OnDeserialized(Activity workflow, WorkflowInstance workflowInstance) at System.Activities.Hosting.WorkflowInstance.InitializeCore(IDictionary2 workflowArgumentValues,
IList1
workflowExecutionProperties) at System.Activities.Hosting.WorkflowInstance.Initialize(Object deserializedRuntimeState, DynamicUpdateMap updateMap) at System.Activities.WorkflowApplication.LoadCore(DynamicUpdateMap updateMap, TimeoutHelper timeoutHelper, Boolean
loadAny, IDictionary2 values) at System.Activities.WorkflowApplication.Load(Guid instanceId, TimeSpan timeout) at System.Activities.WorkflowApplication.Load(Guid instanceId) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.WorkflowInstance.WorkflowInstanceCacheSingleton.<.cctor>b__1(WorkflowApplication
app, Guid id) at
Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.WorkflowInstance.WorkflowInstanceCache.CreateApplicationInCache(CreateParameters createParameters, Guid id) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.WorkflowInstance.WorkflowInstanceCache.GetInstance(CreateParameters
createParameters, Guid id) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.WorkflowInstance.CachedWorkflowInstanceLoader.GetInstance(DeploymentLog log, CreateParameters createParams) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.DeploymentControllerServiceProcessor.ContinueDeploymentWithFinalComponentState(DeploymentLog
log) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.DeploymentControllerServiceProcessor.ContinueDeployment(String log)
Category: General
Priority: -1
EventId: 0
Severity: Error
Title:
Machine: **********
Application Domain: /LM/W3SVC/1/ROOT-1-130630102320068767
Process Id: 6628
Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Win32 Thread Id: 1344
Thread Name:
Extended Properties:

Dear Charles-Li,
Thank you so much for your reply.
we started using Release Management Update 1 and it was worked perfectly fine. then we move to upgrade existing Release Management(server,
Database and agent) with Update 3, which we did, and its working fine except lots of error as mentioned in above thread, are getting logged in server event log at regular interval till now(3-4 errors every second).
even though lots of error are getting logged but we are not facing any issue while using Release Management with update 3.
But i am bit curious to know out reason for getting those error.
<<clean
the cache folder and restrat Release Management and try again>>
already tried but no luck.
Thanks!!

TFS and Release Managment Setup in Azure VM- Release managment Extension not avaliable

Hi
We are planning to setup TFS and Release Management on a VM in Azure. In the portal there is an option to create a VM with TFS which is great but I do not see any option to install Release Managment as an extension.
based on this link
Install Release Management as Extension (at the end of the article). I do not see the this option under extension when i am setting up a VM.
If there is another way of installing this from the portal please let me know
I know I can install all this as a stand alone installer but since azure provides these options thought i would use them.
Thanks

Hi kumarforum,
Since this thread is more related to Azure management portal, I will move it to the right forum for a better response. Thanks for your understanding.
Best regards,

TFS Group not updating in Release Manager

Similar Messages

Maybe you are looking for