TFTP Timeout Error on PXE Boot
Ok this is what happened. I tried to patch a image with windows updates - It filled up my hard drive. So I canceled the process and attempted to remove the folder it created on my hard drive. I went to try pxe boot a machine and I got the
blue screen:
After this I removed the check next to pxe to uninstall WDS and I waited for it to uninstall and reboot. After that I clicked the check box next pxe so it would install everything again. I redistributed the x86 and x64 boot images but now when
I try to pxe boot a machine I get the following in event viewer:
The Following Client failed TFTP Download:
IP *.*.*.*
Filename: SMSBoot\x64\wdsnbp.com
ErrorCode: 1460
I even made added the entry in the registry to change the TFTP block size. I have no idea what to do at this point. I am running Windows Server 2008 R2 and SCCM 2012 SP1. On the client machine I am getting TFTP timeout.
1460 (0x5B4) =ERROR_TIMEOUT
This operation returned because the timeout period expired.
Have you seen this KB?
Operating system deployment over a network by using WDS fails in Windows Server 2008 and in Windows Server 2008 R2
http://support.microsoft.com/kb/975710
For more information, see the following TechNet articles:
WDS TFTP Server:
http://technet.microsoft.com/en-us/library/cc753134(WS.10).aspx
(http://technet.microsoft.com/en-us/library/cc726631(WS.10).aspx)
Network Boot Programs (NBP):
http://technet.microsoft.com/en-us/library/cc753134(WS.10).aspx
(http://technet.microsoft.com/en-us/library/cc753134(WS.10).aspx)
How to Modify the BCD Store Using Bcdedit: http://technet.microsoft.com/en-us/library/cc731245(WS.10).aspx#BKMK_41
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Running callmanager 8.6.2 and have cisco 7962 and 7961 deploy in one of our site utilizing SCCP however the ssue: currently I'm unable to get my 7962 or 7961 phone to register with cucm. Error message on 7962 phone "TFTP Timeout"
any ideathese are a new 7962 phone that we are peploying remote. the phones are getting
correct IP address address from DHCP
correct TFTP address
however we are getting tftp timeout error
If I go into the options menu and view IPv4 Configuration, it says:
DCHP - Enabled
IP Address - 10.68.44.11
Subnet Mask - 255.255.255.0
Default Router 1,2,3,4,5 are blank
DNS Server 1 - 10.232.0.15
DNS Server 2 - 10.232.0.14
DNS Server 3 - 10.224.95.15
DNS Server 4 - 10.224.96.14
DNS Server 5 - 10.216.0.15
DHCP Server - 10.232.0.46
DHCP Address Released - No
Alternate TFTP - No
TFTP Server - 10.138.244.21
TFTP Server 2 -
BOOTP Server - No
MAC address - 3COE236D5FF3
Host Name - SEP3C0E236D5FF3
Domain Name - Infosolco.net
Operational VLAN ID - 20
Admin. VLAN Id -
SW Port Configuration - Auto Negotiate
PC Port Configuration - Auto Negotiate
PC VLAN -
VPN - Not Connected -
Wds pxe boot - tftp download loop - 4 times F12
Hi
I just set up a new wds server 2012
When trying to pxe boot a client, it loops like this:
Downloaded WDSNBP from...
WDSNBP started using DHCP referral.
Contacting server...
Architecture...
Contacting server...
TFTP download: boot\x86\wdsnbp.com
Downloaded WDSNBP from ...
Architecture...
Contacting Server...
TFTP download: boot\x86\wdsnbp.com
Then it goes on 4 times in a row:
"TFTP Download: Boot\x86\wdsnbp.com"
With Option "Require the user to press the F12 key..." enabled,
I have to press F12 4 times, which is 3 times too many.After the x-th download of wdsnbp.com the client continues the boot process
normally and the rest works fine.
Any help is greatly appreciated.
MichaelWe are experiencing the same thing.
This started after enabling scope option 67 to solve this error: PXE-E53: No Boot filename received.
This only occurs on selected machines. We do employ IP Helpers and are thinking this could be an issue. -
Hi there,
I am using MDT 2013 on a WDS 2008 R2 and everytime i tried to image the tablet via PXE boot through the Surface Pro 3 ethernet adapter, i get this error:
Wizard Error:
A connection to the deployment (my deployment share) could not be made.
The following network device did not have a driver installed.
PCI\VEN_11AB&DEV_2B38&SUBSYS_045E0001&REV_00
Retry: Try again to connect to the deployment share.
Cancel: Give up, cancelling any in-progress task sequence.
PLEASE HELP!I bought a Belkin USB2.0 adapter and connected to my Pro 3 while the Pro 3 ethernet adapter is connected as well. So 2 network cables are needed. I pxed boot using the Pro 3 ethernet adapter and deploy the image using the Belkin2.0 adapter. Error didnt
come back and deployment was successful. I mean this is a workaround but it works in my environment. The Belkin2.0 drivers are in WinPE and MDT. -
Slow PXE boot. TFTP windowing issue
Hi
we have just set up SCCM 2012 and have configured OSD. It works well apart form the length of time it takes to download the boot.wim on a PXE boot.
We took some network traces and noticed that TFTP was behaving as if the Windowing was set to 1 so every block was being ACK'ed before another was sent.
I checked the Windowing size on the bcd file of the boot image and the setting was
ramdisktftpwindowsize 4
Any ideas why TFTP doesn;t seem to be picking this up?The Microsoft article would suggest that the Window Size options should be available in the latest implementations of PXE
http://technet.microsoft.com/en-us/library/hh974416.aspx
TFTP enhancements
What value does this change add?
Trivial File Transfer Protocol (TFTP) enhancements result in improved performance.
What works differently?
TFTP (Trivial File Transfer Protocol) has been enhanced and delivers improved results in performance.
You use the Windows Deployment Services Trivial File Transfer Protocol (TFTP) server to download the files
that are needed to do a network boot using the Pre-Boot Execution Environment (PXE). PXE technology is a standard created by Intel that establishes a common and consistent set of pre-boot services within the boot firmware. The end goal is to enable a client
to do a network boot and receive a network boot program (NBP) from a network boot server.
TFTP enhancements include:
Scalable buffer management Provides
support for a shared client buffer; allows buffering an entire file instead of a fixed size buffer for each client. Scalable TFTP buffer feature allows maintaining a single buffer per file in the server. When the server is buffering a file in shared mode,
different sessions can read from the same shared buffer.
Scalable port management Ability
to use a dynamic or a fixed range of UDP ports to service clients with shared UDP port allocation. Sharing the same server port among different TFTP sessions improves scalability because there are sufficient ports when more clients are actively using the server.
Variable-size transmission window Allows
the client and server to determine the largest workable window size, resulting in improved TFTP performance. Provides the ability to dynamically determine the optimal window size.
Maximum TFTP block size Previously implemented
as a registry setting, this is now exposed to users through WDSUTIL and the WDS MMC snap-in. -
WDS PXE Problems on 1 model of PC only - The following Client failed TFTP Download - Error Code 1460
Hey all,
I am experiencing a problem with my WDS PXE Environment, with 1 specific model of PC's only. This is a Dell XPS machine with an Intel e1000 nic in it.
The problem is that when you PXE Boot, it starts off fine, and I reach a menu that has all of my boot images listed, but as soon as you pick one it hangs on a black screen.
From the event viewer on the server I can see the following entry:
The Following Client failed TFTP Download:
IP: 10.130.148.211
Filename: \Boot\Boot.SDI
ErrorCode: 1460
I've done some google searching and found some topics that could be related, but none of the fixes mentioned helped me. This is the one I tried:
http://social.technet.microsoft.com/Forums/en-US/winserversetup/thread/a1246f62-6a8a-482b-9323-7e02dfeab196/#52aaf6fb-9494-4327-bbc3-8afe3e78905c
The problem I had was that the link they gave to the Hotfix, doesnt actually have anyway to download the hotfix!!
http://support.microsoft.com/kb/975710
Although
I am not convinced that packet size is the problem here, more likely some network or disk controller driver issues??
No
idea at all where to go from here. It is only this one model of PC that fails, and all others work fine. If someone can point me in the right direction it would be very greatly appreciated.
I
would be happy to provide you with any additional details you may require.
Thanks,
-BenYou need to contact CSS to get this fix.
Hotfix Information
A supported hotfix is now available from Microsoft. However, it is intended to correct only the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore,
if you are not severely affected by this problem, we recommend that you wait for the next Windows Server 2008 service pack that contains this hotfix.
To resolve this problem immediately, contact Microsoft Customer Support Services to obtain the hotfix. For a complete list of Microsoft Customer Support Services telephone numbers
and information about support costs, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)
John | Program Manager | System Center Configuration Manager -
Lenovo X1 Carbon PXe boot errors with SCCM 2007
I know there are many posts on this and I've gone through them all, but I am still having issues PXe booting a X1. I have a USB ethernet dongle (the new type with the rounded edge). the part number is 0b67708. It's branded Lenovo but when I pxe it recognises it as ASIX AX88772b. So far so good. It picks up an IP from DHCP ok, recognises the hardware as x64 and then tries to download the \smsboot\boot.sdi file from the SCCM 2007 server. It waits for 20 seconds then falls over with the following:
Status: 0xc0000001 - Info: The boot selection failed because a required device is inaccessible.
Now, I have the the following drivers in the boot.wim file:
x86 -
1. Lenovo USB2.0 Ethernet Adapter 5.12.7.0
2. PCI bus
3. Intel ICHR/DO/DH SATA AHCI Controller
4. Intel USB 3.0 Root Hub
5. Intel USB 3.0 eXtensible Host Controller
x64 -
1. Lenovo USB 2.0 Ethernet Adapter 5.14.4.0
2. PCI Bus
3. Intel ICHR/DO/DH SATA AHCI Controller - 2821
4. Intel USB 3.0 Root Hub
5. Intel USB 3.0 eXtensible Host Controller
I have tried using the ASIX drivers, all previous driver version, adding in the mass storage drivers, adding in the USB 3.0 drivers, praying to the PXe gods but nothing works.
All other hardware works fine. Any suggestions greatly welcomed.
Cheers - Mark.Make a USB recovery drive before reinstalling.Thats the only option with a preload. With a retail serial number, you can download an iso with the upgrade assistant.
Also, how much ram do you have. If yopu have more than 4GB, you will need 64 bit XP, or the performance will take a hit. I tried XP on my W530, but I had to change several settings in the BIOS/UEFI.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac. -
Hello All,
Please I need help! I have not seen the above error without relationship to two of the known causes for sometime during a Windows 7 osd in an SCCM 2012 R2 environment with a remote DP/PXE server. I understand this error: to occur when the boot images
does not have "Network drivers in the past Winpe version ( i.e. 3.0, 4.0), not Winpe 5.0 which has all the Network and storage drivers for Windows 7" or when Port fast is not enabled on the switch port the pxe device is plugged into. These two causes
stated here have been verified and confirmed not to be the cause in this case within the environment. The PXE boot device has ip-address (verified using ip-config, diskpart as well reveals the disk is online) and can ping the wds/pxe server and the sccm server.
Port fast is enabled on the switch port the device is plugged into. I am stuck on this one; as I could not ascertain the cause on this occasion.
Please see details below and I welcome any help any body can offer, thanks in advance guys!
Client – Winpe x64
Server - Windows Server 2008 R2 configured as a PXE / WDS / SCCM DP
Network - both devices on the same subnet
Problem: Client performs PXE boot, downloads Winpe without problems. Client then tries to download .var file. This is not successful and TFTP timeout is received. Error code in
smsts.log states:
<![LOG[Executing: X:\sms\bin\x64\smstftp.exe -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.285+480"
date="07-01-2014" component="TSPxe" context="" type="0" thread="376" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="14:13:57.332+480" date="07-01-2014" component="TSPxe" context="" type="0"
thread="376" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\x64\smstftp.exe" -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.332+480"
date="07-01-2014" component="TSPxe" context="" type="0" thread="376" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\x64\smstftp.exe" -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.332+480"
date="07-01-2014" component="TSPxe" context="" type="1" thread="376" file="commandline.cpp:827">
<![LOG[Process completed with exit code 1]LOG]!><time="14:14:45.379+480" date="07-01-2014" component="TSPxe" context="" type="1" thread="376"
file="commandline.cpp:1123">
Network trace is detailed below:
324994 11:47:35 04/07/2014 166.7634594
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
325069 11:47:36 04/07/2014 167.7554047 svchost.exe Client Server
TFTP TFTP: Read Request - File: \SMSTemp\2014.07.03.15.45.31.0001.{549002A3-C9C9-4189-8AFE-9F8B272BECC1}.boot.var, Transfer Mode: octet
{UDP:321, IPv4:72}
325070 11:47:36 04/07/2014 167.7556504
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
325071 11:47:36 04/07/2014 167.7598345
Server Client TFTP TFTP: Data - Block Number: 1 {UDP:322, IPv4:72}
325072 11:47:36 04/07/2014 167.7607151
Client Server TFTP TFTP: Acknowledgement - Block Number: 1 {UDP:322, IPv4:72}
325073 11:47:36 04/07/2014 167.7608240
Server Client TFTP TFTP: Data - Block Number: 2 {UDP:322, IPv4:72}
325074 11:47:36 04/07/2014 167.7615948
Client Server TFTP TFTP: Acknowledgement - Block Number: 2 {UDP:322, IPv4:72}
325075 11:47:36 04/07/2014 167.7616991
Server Client TFTP TFTP: Data - Block Number: 3 {UDP:322, IPv4:72}
325076 11:47:36 04/07/2014 167.7624602
Client Server TFTP TFTP: Acknowledgement - Block Number: 3 {UDP:322, IPv4:72}
325077 11:47:36 04/07/2014 167.7625635
Server Client TFTP TFTP: Data - Block Number: 4 {UDP:322, IPv4:72}
325078 11:47:36 04/07/2014 167.7629426
Client Server TFTP TFTP: Acknowledgement - Block Number: 4 {UDP:322, IPv4:72}
325079 11:47:36 04/07/2014 167.7630452
Server Client TFTP TFTP: Data - Block Number: 5 {UDP:322, IPv4:72}
325080 11:47:36 04/07/2014 167.7637927
Client Server TFTP TFTP: Acknowledgement - Block Number: 5 {UDP:322, IPv4:72}
325081 11:47:36 04/07/2014 167.7638947
Server Client TFTP TFTP: Data - Block Number: 6 {UDP:322, IPv4:72}
325082 11:47:36 04/07/2014 167.7643324
Client Server TFTP TFTP: Acknowledgement - Block Number: 6 {UDP:322, IPv4:72}
325083 11:47:36 04/07/2014 167.7644367
Server Client TFTP TFTP: Data - Block Number: 7 {UDP:322, IPv4:72}
325084 11:47:36 04/07/2014 167.7652140
Client Server TFTP TFTP: Acknowledgement - Block Number: 7 {UDP:322, IPv4:72}
325085 11:47:36 04/07/2014 167.7653183
Server Client TFTP TFTP: Data - Block Number: 8 {UDP:322, IPv4:72}
325086 11:47:36 04/07/2014 167.7660907
Client Server TFTP TFTP: Acknowledgement - Block Number: 8 {UDP:322, IPv4:72}
325087 11:47:36 04/07/2014 167.7661940
Server Client TFTP TFTP: Data - Block Number: 9 {UDP:322, IPv4:72}
325088 11:47:36 04/07/2014 167.7669372
Client Server TFTP TFTP: Acknowledgement - Block Number: 9 {UDP:322, IPv4:72}
325089 11:47:36 04/07/2014 167.7670323
Server Client TFTP TFTP: Data - Block Number: 10 {UDP:322, IPv4:72}
325090 11:47:36 04/07/2014 167.7674067
Client Server TFTP TFTP: Acknowledgement - Block Number: 10 {UDP:322, IPv4:72}
325091 11:47:36 04/07/2014 167.7674809
Server Client TFTP TFTP: Data - Block Number: 11 {UDP:322, IPv4:72}
325092 11:47:36 04/07/2014 167.7681308
Client Server TFTP TFTP: Acknowledgement - Block Number: 11 {UDP:322, IPv4:72}
325093 11:47:36 04/07/2014 167.7682056
Server Client TFTP TFTP: Data - Block Number: 12 {UDP:322, IPv4:72}
325094 11:47:36 04/07/2014 167.7685383
Client Server TFTP TFTP: Acknowledgement - Block Number: 12 {UDP:322, IPv4:72}
325095 11:47:36 04/07/2014 167.7686108
Server Client TFTP TFTP: Data - Block Number: 13 {UDP:322, IPv4:72}
325096 11:47:36 04/07/2014 167.7692475
Client Server TFTP TFTP: Acknowledgement - Block Number: 13 {UDP:322, IPv4:72}
325097 11:47:36 04/07/2014 167.7693216
Server Client TFTP TFTP: Data - Block Number: 14 {UDP:322, IPv4:72}
325098 11:47:36 04/07/2014 167.7696477
Client Server TFTP TFTP: Acknowledgement - Block Number: 14 {UDP:322, IPv4:72}
325099 11:47:36 04/07/2014 167.7697202
Server Client TFTP TFTP: Data - Block Number: 15 {UDP:322, IPv4:72}
325100 11:47:36 04/07/2014 167.7703651
Client Server TFTP TFTP: Acknowledgement - Block Number: 15 {UDP:322, IPv4:72}
325101 11:47:36 04/07/2014 167.7704386
Server Client TFTP TFTP: Data - Block Number: 16 {UDP:322, IPv4:72}
325102 11:47:36 04/07/2014 167.7707479
Client Server TFTP TFTP: Acknowledgement - Block Number: 16 {UDP:322, IPv4:72}
325103 11:47:36 04/07/2014 167.7708214
Server Client TFTP TFTP: Data - Block Number: 17 {UDP:322, IPv4:72}
325104 11:47:36 04/07/2014 167.7714862
Client Server TFTP TFTP: Acknowledgement - Block Number: 17 {UDP:322, IPv4:72}
325105 11:47:36 04/07/2014 167.7715603
Server Client TFTP TFTP: Data - Block Number: 18 {UDP:322, IPv4:72}
325106 11:47:36 04/07/2014 167.7718715
Client Server TFTP TFTP: Acknowledgement - Block Number: 18 {UDP:322, IPv4:72}
325107 11:47:36 04/07/2014 167.7719450
Server Client TFTP TFTP: Data - Block Number: 19 {UDP:322, IPv4:72}
325108 11:47:36 04/07/2014 167.7726029
Client Server TFTP TFTP: Acknowledgement - Block Number: 19 {UDP:322, IPv4:72}
325109 11:47:36 04/07/2014 167.7726800
Server Client TFTP TFTP: Data - Block Number: 20 {UDP:322, IPv4:72}
325110 11:47:36 04/07/2014 167.7733471
Client Server TFTP TFTP: Acknowledgement - Block Number: 20 {UDP:322, IPv4:72}
325111 11:47:36 04/07/2014 167.7734203
Server Client TFTP TFTP: Data - Block Number: 21 {UDP:322, IPv4:72}
325112 11:47:36 04/07/2014 167.7737411
Client Server TFTP TFTP: Acknowledgement - Block Number: 21 {UDP:322, IPv4:72}
325113 11:47:36 04/07/2014 167.7738142
Server Client TFTP TFTP: Data - Block Number: 22 {UDP:322, IPv4:72}
325114 11:47:36 04/07/2014 167.7744648
Client Server TFTP TFTP: Acknowledgement - Block Number: 22 {UDP:322, IPv4:72}
325115 11:47:36 04/07/2014 167.7745386
Server Client TFTP TFTP: Data - Block Number: 23 {UDP:322, IPv4:72}
325116 11:47:36 04/07/2014 167.7748657
Client Server TFTP TFTP: Acknowledgement - Block Number: 23 {UDP:322, IPv4:72}
325117 11:47:36 04/07/2014 167.7749395
Server Client TFTP TFTP: Data - Block Number: 24 {UDP:322, IPv4:72}
325118 11:47:36 04/07/2014 167.7755914
Client Server TFTP TFTP: Acknowledgement - Block Number: 24 {UDP:322, IPv4:72}
325119 11:47:36 04/07/2014 167.7756649
Server Client TFTP TFTP: Data - Block Number: 25 {UDP:322, IPv4:72}
325120 11:47:36 04/07/2014 167.7760109
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
325277 11:47:37 04/07/2014 168.7554246
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
325278 11:47:37 04/07/2014 168.7709396
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
325397 11:47:39 04/07/2014 170.7708892
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
326185 11:47:40 04/07/2014 171.7552905
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
327030 11:47:43 04/07/2014 174.7588879
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
327031 11:47:43 04/07/2014 174.7707730
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
327178 11:47:44 04/07/2014 175.7552028
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
327510 11:47:45 04/07/2014 176.7551962
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328598 11:47:48 04/07/2014 179.7552497
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328630 11:47:51 04/07/2014 182.7551309
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328631 11:47:51 04/07/2014 182.7707620
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
328658 11:47:54 04/07/2014 185.7550375
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328669 11:47:57 04/07/2014 188.7709719
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328677 11:47:59 04/07/2014 190.7862445
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
328690 11:48:00 04/07/2014 191.7708666
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328717 11:48:03 04/07/2014 194.7706918
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328730 11:48:06 04/07/2014 197.7704623
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328736 11:48:07 04/07/2014 198.7861669
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
329217 11:48:09 04/07/2014 200.7705229
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
329420 11:48:12 04/07/2014 203.7704633
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
329795 11:48:15 04/07/2014 206.7704298
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
329796 11:48:15 04/07/2014 206.7858646
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
329990 11:48:18 04/07/2014 209.7704360
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
330005 11:48:21 04/07/2014 212.7703291
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
330014 11:48:23 04/07/2014 214.7862410
Client Server TFTP TFTP: Error - ErrorCode: 0, ErrorMessage: timeout on receive {UDP:322, IPv4:72}Hi,
According to the logs, this issue still should be related to network driver. It failed after network driver initialized. Please try to use another network driver.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
PXE boot fails and reboots after loading PE
I have run into what I think is a unique issue and need some help determining the cause.
We are in the process of replacing and aging DP/PXE point (2003 R2 SP2) with a new server (2008 STD R2 SP1). What makes my pxe issue unique is that pxe works without issue on the existing 2003 DP/PXE server. But on the new 2008 server I run into
the following issue.
Environment: Config Manager 2007 R2, a single primary, multiple DP's and PXE points.
Issue: When I attempt to PXE boot a system, I am able to load PE, but shortly after the custom background screen is loaded, the system reboots. I've searched the internet quite a bit and found lots of potential causes including, bad/missing drivers,
certificate issues, rights issues, etc. None of these seem to be the cause.
My troubleshooting has determined that the client computers are unable to download the variables.dat file. I just don't know why.
We're using the same boot images on both servers.
I've tried using multiple computer models and VM's.
I've opened a command prompt as soon as our background image loads and have verified that the system is pulling a valid IP address. I am able to map a drive to the PXE server's REMINST share using our sccm net access account and manually copy the .var
file using xcopy to the appropriate directory on the local virtual drive. I've also attempted to manually run smstftp.exe by mimicking the command line from the smsts log file. I'll admit that I'm not sure I have the correct syntax for smstftp.
I've tried several variations and all but one result in a short pause and no file copied/created in the X:\sms\data folder. The one that does produce a result says that the file cannot be found. I checked for typos and made sure I used the name
of the newly created .var file.
I've also tried disabling anti-virus on the server, shutting off the windows firewall on the server, granting everyone read rights to the REMINST share.
Below is the smstslog file I've been using as a reference. Per corporate security policy, I have X'd out the IP address of the PXE server. The log file for the successful pxe boot from the 2003 server shows an exit code of 0 for smstftp.exe, a note
about successful download of the pxe var file and then it continues through the rest of the boot process.
-----SMSTS log file from a failed PXE boot on the new 2008 server -----
<![LOG[LOGGING: Finalize process ID set to 832]LOG]!><time="16:13:54.440+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="tslogging.cpp:1489">
<![LOG[==============================[ TSBootShell.exe ]==============================]LOG]!><time="16:13:54.440+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836"
file="bootshell.cpp:963">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="16:13:54.440+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="util.cpp:869">
<![LOG[Debug shell is enabled]LOG]!><time="16:13:54.440+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:974">
<![LOG[Waiting for PNP initialization...]LOG]!><time="16:13:54.471+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:59">
<![LOG[Booted from network (PXE)]LOG]!><time="16:13:54.830+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="configpath.cpp:198">
<![LOG[Found config path X:\sms\data\]LOG]!><time="16:13:54.830+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:553">
<![LOG[Booting from removable media, not restoring bootloaders on hard drive]LOG]!><time="16:13:54.830+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:564">
<![LOG[Executing command line: wpeinit.exe -winpe]LOG]!><time="16:13:54.830+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:767">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="16:13:57.014+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:767">
<![LOG[The command completed successfully.]LOG]!><time="16:13:57.014+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:850">
<![LOG[Successfully launched command shell.]LOG]!><time="16:13:57.014+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="836" file="bootshell.cpp:430">
<![LOG[The command completed successfully.]LOG]!><time="16:14:41.458+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:850">
<![LOG[Starting DNS client service.]LOG]!><time="16:14:41.458+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:597">
<![LOG[Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="16:14:41.973+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880"
file="bootshell.cpp:767">
<![LOG[The command completed successfully.]LOG]!><time="16:14:41.973+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:850">
<![LOG[==============================[ TSMBootStrap.exe ]==============================]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932"
file="tsmbootstrap.cpp:1039">
<![LOG[Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="0" thread="1932"
file="tsmbootstrap.cpp:1040">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932" file="util.cpp:869">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL']LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932" file="resourceutils.cpp:152">
<![LOG[Processor Is IA64: 0]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932" file="tsmbootstrap.cpp:1005">
<![LOG[PXE Boot with Root = X:\]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="1" thread="1932" file="tsmbootstrap.cpp:921">
<![LOG[Executing from PXE in WinPE]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="0" thread="1932" file="tsmbootstrap.cpp:936">
<![LOG[Loading TsPxe.dll from X:\sms\bin\i386\TsPxe.dll]LOG]!><time="16:14:41.989+000" date="12-23-2013" component="TSMBootstrap" context="" type="0" thread="1932" file="tsmbootstraputil.cpp:1319">
<![LOG[TsPxe.dll loaded]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="tsmbootstraputil.cpp:1329">
<![LOG[Device has PXE booted]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="tspxe.cpp:122">
<![LOG[Variable Path: \SMSTemp\2013.12.23.16.11.24.0002.{AB0FBE86-1F6C-47D7-919B-A44641035A2E}.boot.var]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932"
file="tspxe.cpp:134">
<![LOG[Variable Key Len: 61]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="tspxe.cpp:141">
<![LOG[Succesfully added firewall rule for Tftp]LOG]!><time="16:14:42.004+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="fwopen.cpp:123">
<![LOG[Executing: X:\sms\bin\i386\smstftp.exe -i XXX.XXX.XXX.XXX get \SMSTemp\2013.12.23.16.11.24.0002.{AB0FBE86-1F6C-47D7-919B-A44641035A2E}.boot.var X:\sms\data\variables.dat]LOG]!><time="16:14:42.004+000" date="12-23-2013"
component="TSPxe" context="" type="0" thread="1932" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="16:14:42.067+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="commandline.cpp:229">
<![LOG[Set command line: "X:\sms\bin\i386\smstftp.exe" -i XXX.XXX.XXX.XXX get \SMSTemp\2013.12.23.16.11.24.0002.{AB0FBE86-1F6C-47D7-919B-A44641035A2E}.boot.var X:\sms\data\variables.dat]LOG]!><time="16:14:42.067+000" date="12-23-2013"
component="TSPxe" context="" type="0" thread="1932" file="commandline.cpp:707">
<![LOG[Executing command line: "X:\sms\bin\i386\smstftp.exe" -i XXX.XXX.XXX.XXX get \SMSTemp\2013.12.23.16.11.24.0002.{AB0FBE86-1F6C-47D7-919B-A44641035A2E}.boot.var X:\sms\data\variables.dat]LOG]!><time="16:14:42.067+000" date="12-23-2013"
component="TSPxe" context="" type="1" thread="1932" file="commandline.cpp:805">
<![LOG[Process completed with exit code 1]LOG]!><time="16:15:29.179+000" date="12-23-2013" component="TSPxe" context="" type="1" thread="1932" file="commandline.cpp:1102">
<![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932" file="fwopen.cpp:146">
<![LOG[uExitCode == 0, HRESULT=80004005 (e:\nts_sms_fre\sms\server\pxe\tspxe\tspxe.cpp,185)]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="0" thread="1932"
file="tspxe.cpp:185">
<![LOG[Failed to download pxe variable file. Code(0x00000001)]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="3" thread="1932" file="tspxe.cpp:185">
<![LOG[PxeGetPxeData failed with 0x80004005]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="3" thread="1932" file="tsmbootstraputil.cpp:1419">
<![LOG[HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1420)]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context=""
type="0" thread="1932" file="tsmbootstraputil.cpp:1420">
<![LOG[TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2236)]LOG]!><time="16:15:29.194+000" date="12-23-2013"
component="TSPxe" context="" type="0" thread="1932" file="tsmediawizardcontrol.cpp:2236">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, true ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,937)]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe"
context="" type="0" thread="1932" file="tsmbootstrap.cpp:937">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1106)]LOG]!><time="16:15:29.194+000" date="12-23-2013"
component="TSPxe" context="" type="0" thread="1932" file="tsmbootstrap.cpp:1106">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSPxe" context="" type="1" thread="1932" file="tsmbootstrap.cpp:1118">
<![LOG[Execution complete.]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="bootshell.cpp:624">
<![LOG[Finalizing logging from process 832]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="tslogging.cpp:1736">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="16:15:29.194+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="tslogging.cpp:1578">
<![LOG[LOGGING: Setting log directory to "D:\SMSTSLog".]LOG]!><time="16:15:29.491+000" date="12-23-2013" component="TSBootShell" context="" type="1" thread="880" file="tslogging.cpp:1803">
This has been an extremely frustrating issue and any assistance would be greatly appreciated!Thanks for your quick response Jason! I didn't expect someone to reply so quickly or I would have checked back sooner.
I had found the two 'older' posts already, but had not seen the 'newer' one. Unfortunately that did not give me any new ideas. But your comment on checking for TFTP availability did. Here are things I have tried since my original
post...
I re-ran most of my tests in case I missed something. I only found one change. Even though I double-checked, I must have made a typo when I manually ran the smstftp.exe command, because when I ran it again I received a timeout message instead
of file not found.
I had a minor 'thinking outside of the box moment' and decided to PXE boot the new 2008 R2 server itself. This was successful and I interpreted the success as meaning that the hardware is ok. Thinking there may be a compatibility issue with
the hardware and the OS, I tried a few different NIC drivers, settings, registry keys, and even a completely different NIC. No luck on any of these.
I decided to build another Server on a VM tovalidate my build process and configuration. And of course clients in multiple locations were able to PXE boot off this VM. Too bad I can't use this in production.
After reading your response Jason, I began to focus on network. I moved the server to a few different locations so it was utilizing different switches. No luck. I noticed in the event viewer for WDS that the server was logging the
beginning of the boot.var file via TFTP. This of course was not very surprising. What was surprising is that the very next entry (informational) noted that the client 'COMPLETED' the download of the boot.var file via TFTP. I know that completed
does not mean successful, but it usually implies or is interpreted as successful. It should have logged a warning or error, or nothing at all because although the process completed, it was not successful. I re-verified that the file was not downloaded
to the client and the client log file still shows the same error noted in the logfile from my original post.
Finally, I installed sniffing software on the server and ran some captures while attempting to PXE boot. Even though I am not much of a network guy, I quickly discovered two things. First, I found the section where the client attempts to download
the boot.var file. Unfortunately I don't think the local security team will allow me to post the capture, so I'll do my best to describe what I found. It starts with a single entry where the client calls for the file via TFTP protocol. This
is followed by a series of alternating entries (all TFTP) where it looks like the server attempts to send a portion of the file, and the client sends an acknowledgement. The sending entries all have checksum errors. The checksum received on
all packets is 0x0000 and of course should be something else. There is also a shorter section below this with alternating entries where the server attempts to send ICMP packets and the client responds with TFTP acknowledgements.
The ICMP entries are all marked as Destination unreachable (Port Unreachable).
The second thing I noticed from the network capture is the a few 'Spanning Tree Protocol' entries. I my search for a solution, I remember reading several posts saying that Spanning Tree can cause this issue. When I asked, I was assured that
Spanning Tree was disabled in this environment. It made sense too, because the 2003 PXE server was functioning properly, and Spanning Tree should affect both 2003 and 2008 servers, right?
Either way I will bring my findings to the network team and see what they have to say.
Any additional thoughts or ideas??? -
Windows Deployment Services Unable to PXE boot clients PXE-E53: No Boot Filename Received
Hi
I'm trying to configure WDS/MDT to deploy Windows 8.1. I've captured an image and I'm ready to deploy the image to a workstation, as per the above title when I attempt to PXE boot a test workstation it just times out with the following error message PXE-E52:No
Boot Filename Recieved. I've tried a few tweaks to get it working however no such luck.
The setup is as follows it's a virtual Windows 2012 R2 machine, just a fresh member server with microsoft deployment toolkit installed and WDS role installed with the nesscary framework features installed.
I've tried tweaking the properties of most of the settings within the server settings in WDS with no such luck.
I'm a novice at WDS but from what I've read I shouldn't need configure that much in the first place to get it working.
I'm willing to bet it will be something I've overlooked so I need a 2nd opinon, could anyone provide any troubleshooting tips. If you require anymore information please let me know.
CheersHi Joel,
This error may caused by the WDS server is not pushing the images because PXE Clients are not able to download or communicate with the TFTP server.
The image can’t be download generally caused by the the Vlan is not enabled IP helper/DHCP relay agent configured on it, all DHCP broadcasts on UDP port 67 by client computers
should be forwarded directly to both the DHCP server and the Windows Deployment Services PXE server.
The related KB:
PXE clients computers do not start when you configure the Dynamic Host Configuration Protocol server to use options 60, 66, 67
http://support.microsoft.com/kb/259670
The similar thread:
PXE-E53: No boot filename received
http://social.technet.microsoft.com/Forums/systemcenter/en-US/8de3bd6a-f8ec-41d9-ae0f-5b2fdb9e5831/pxee53-no-boot-filename-recieved?forum=configmgrosd
WDSServer (Windows Deployment Server) Fails to Start
http://social.microsoft.com/Forums/en-US/d96b0b86-f2b0-49a5-8946-19ab515f23e6/wdsserver-windows-deployment-server-fails-to-start?forum=windowshpcitpros
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I'm trying to boot a toshiba SP6100 from ris but getting
PXE-T01:File not found
PXE-E3B: TFTP error - File not found
PXE-MOF: Exiting Intel PXE ROM.
No problem what so ever when booting other mashies (Other brands).
When trying to boot from a Remote boot disk i get:
Error: Could not found a supported network card.....
PC is running latest bios (1.9)
Any suggestions?Hi
I have found an interesting Microsoft Knowledge Base Article Q304992.
It deals with the PXE Boot and RIS server method, perhaps it could help you!
Pelox -
PXE boot menu time out option??
We are currently imaging our schools and would like to implement the "always show pxe menu" rather than holding down ctrl & alt. My problem is that when the computer reboots it stops at the menu and requires manual intervention and that means extra trips to the computers.
I would like to put a timeout on the pxe options menu for 30 seconds then have the computer continue the boot to the HD but I did not see a way to do that in settings.txt in /srv/tftp .
Does anyone have any suggestions?
Thank yourobs609,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com -
Hello everyone!
I've got a PXE boot server running and I can boot my EEE 701 from it without issue, it gets to the installer but then I get asked for the source of the packages. Now, I don't have an Internet connection to the boot server, so that's not an option. I know I can mount something to /src to have the packages show up, but what am I supposed to mount, and where?
Thanks in advance!
P.S: If you're considering "rtfm" or "Google" as a response as some did on the IRC, don't bother wasting your time to type
I mounted a USB stick with all the packages on to /src (I knew that had to be done) but I thought perhaps the installer would have mounted the packages from the tftp server to /src automatically. So now I don't understand the point of the separate installer CD?
Last edited by scottuss (2009-12-17 12:44:55)hokasch wrote:
Hmm, do you mean the one from here? If so, it says "ftp-installation only", but I maybe should have made that more clear. I planned support for mounting packages from the tftp-server later (you need to set up nfs for that), but never picked it up again.
It is stitched together rather imperfectly, I just made it because there was no other way of getting an install on an old laptop.
I've totally gone around the houses
yeah, you could just have booted from an usb-stick, right?
Actually no! I had problems with that (although I've done it before) I got an error: "Boot device didn't show up after 30 seconds" and the workaround(s) at http://bbs.archlinux.org/viewtopic.php?id=77815 didn't help, so I figured I'd try the PXE boot.
Look, I'll be straight, I use Arch on an old box as a testing / development server for odd jobs. I left Arch as a desktop user a long time ago for Ubuntu where things "just work" - I don't have time to fix things constantly breaking on my main desktop. I thought I'd give Arch another go as a desktop OS on my EEE but I don't have the time (or inclination) to mess around with it anymore.
Ubuntu is installing from a USB stick as we speak.
Don't get me wrong: I LOVE Arch, as a headless, non-important playing around OS, I don't think I'll be using it as a desktop
P.S: Using Ubuntu has NOTHING to do with the skill level of anyone who chooses to use it. I HATE elitism! (rant over!)
Last edited by scottuss (2009-12-17 15:08:40) -
We have a need to netboot a PC with Linux via a Cisco router (I.E. PXEboot).
We have copied the PXE linux.cfg files to the Cisco router's flash, (Cisco 2821, IOS Advanced Security 15-1.2-T1).
We have setup the router as a TFTP server with defaulted path as tftp-server flash:tftpboot
From the pc's CMOS, we selected PXE boot.
With "debug ip packet detail", we can see the DHCP request from the PC.
We cannot however, get the router to download the Linux files to the PC.
Manually we tried:
c:\ tftp 10.0.0.1 get default - no go.
ANYONE have an idea????
Thanks
Frank/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hi Ash,
Thanks for the assistance.
The laptop is directly connected to the Cisco 2821 routers g0/0 interface.
The router is configured to be a DHCP server with the Cisco 2821 router IP address on g0/0 set in the DHCP configuration to be the default router. The router’s IP address is excluded from DHCP. (10.0.0.30)
If the laptop’s bios is set to PXE boot, it seems to receive an IP address from the router I.E. 10.0.0.1– verified by statically assigning another pc IP address 10.0.0.1– the 2nd pc receives an error of IP address conflict. Then set the second pc to obtain its’ IP address via DHCP, and while running debug ip packet detail on the router, I see the router running through the DHCP assignment process and finally assigns the 2nd pc 10.0.0.2.
So needless to say, I believe the DHCP setup is functioning correctly.
The problem we have at this point is nailing down the TFTP-server function running on the Cisco 2821 router.
We were able to create the directory tree on the Cisco 2821 routers flash and then copy the correct files into each directory within flash.
Using WinXP DOS prompt, tftp does not seem to function.
With debug ip packet detail running on the router and Wireshark running on the PC, we run from a DOS window c:\tftp 10.0.0.1 GET \default. No matter how we specify the path, end result is an error of some kind.
We watch debug and wireshark display the communications of the PC and router talking, but cannot seem to get the requested file.
Perhaps WinXP tftp server is flawed.
If we load TFTP32 and attempt to send and/or receive a file from flash, works fine.
The router tftp config is as:
tftp-server flash:/tftpboot/dsl/pxeboot.cfg
The actual files name is "default" and is found on the Cisco 2821 flash:/tftpboot/dsl/pxeboot.cfg directory.
No ACLs on the Cisco router and the router is pretty much right out of the box.
Firewall is disabled on both PCs.
Ping to/from the PC/router works fine.
Thanks again
Frank -
Issues with Boot Images & PXE Booting Since SP1 Install
Good Afternoon All -
I recently updated to SP1, had some issues, but they got resolved. Now, though, I'm having an issue booting to PXE as well as updating any boot images created
before SP1 was installed. Booting to USB Bootable media using a newly created boot image seems to work fine.
Boot Images
When I update my DPs for any of my boot images in SCCM, they fail and i get the below error:
Error: The wizard detected the following problems when updating the boot image.
• Failed to install required components into the boot image
The SMS Provider reported an error.: ConfigMgr Error Object:
instance of SMS_ExtendedStatus
• Description = "Failed to insert OSD binaries into the WIM file";
• ErrorCode = 2152205056;
• File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspbootimagepackage.cpp";
• Line = 4566;
• ObjectInfo = "CSspBootImagePackage::PreRefreshPkgSrcHook";
• Operation = "ExecMethod";
• ParameterInfo = "SMS_BootImagePackage.PackageID=\"BBS0012F\"";
• ProviderName = "WinMgmt";
• StatusCode = 2147749889;
I've even gone as far as removing all drivers from the boot image, but still get the same message. I was able to create a couple of
new MDT boot images which seem to work fine, though. I am not sure which log file is for boot images, but nothing appeared in distmgr.log.
PXE Booting Issue
After trying many things, I removed PXE config from my site and uninstalled WDS then started all over again. Here's what I did and my results. Please tell me what I'm missing...
After uninstall & server reboot, I enabled PXE + every option in DP tab in SCCM
It automatically installed WDS (same server) and added the two boot images I had checked for PXE use. one x64 and one x86.
I checked my DHCP Scope whose values hadn't changed sine it worked (that I know of). They are:
Option #66: 192.168.20.37 (SCCM Server/DP/PXE)
Option #67 \boot\x86\wdsnbp.com. I've tried \boot\x86\pxeboot.com as well as each of these with x64.
When I PXE boot from a workstation, I receive an IP, a bit of info, then it goes to Contacting Server.... When trying one of the boot files above, I was prompted for F12, but receved a blue screen with error. When trying all other boot files,
they just hang at Contacting Server until they timeout.
I looked at SMSPXE.log and found something interesting...
The IDs for the two boot images I have assigned to PXE are ABC003B3 & ABC00B36. In the smspxe.log, though, it keeps repeating "could not find boot image ABC0012F! 12F does exist and is a boot image,
but not the one I want to use by any means and does not have PXE checked.
I went ahead and checked 12F, updated DPs (which failed - see above); unchecked it; then updated the DPs again. PXEBoot.log showed that it was trying to remove the 12F files from RemoteInstall which was a good sign. I then restarted the WDS service
and tried PXE booting again. Yet again, it failed and was still looking for 12F.
Any suggestions / Ideas??? Thanks!
UPDATE 1
I just changed option #67 to \smsboot\x86\pxeboot.com then restarted the WDS service. I booted to PXE and this time was asked to hit F12. I did so and it looked as if it would work.
Instead, I got a blue screen with the following error:
Recovery
Your PC needs to be repaired
The boot configuration disk contains errors or is missing
file: boot\BCD
Error Code: 0x000000f
I think that it's the same error as before, but is blue instead of black due to new Win8ADK perhaps. Thanks
Ben K.Update 4
Sorry to make this the longest post ever :)
I just read that others with this error checked DISM.log. I did so when running a DP update for the boot image and got the below errors:
2013-01-11 16:27:04, Info DISM DISM Provider Store: PID=1636 TID=5104 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2013-01-11 16:27:07, Info CBS Failed to find a matching version for servicing stack: C:\Windows\TEMP\BootImages\{DADCFE01-3557-4058-99CC-2A15EDF905AF}\mount\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_655452efe0fb810b\
[HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2013-01-11 16:27:07, Info CBS Failed to find servicing stack directory in online store. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2013-01-11 16:27:07, Warning DISM DISM Provider Store: PID=4104 Failed to Load the provider: C:\Windows\TEMP\0555ABC5-006D-4C3F-B79F-EA0E723FA971\MsiProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2013-01-11 16:27:07, Warning DISM DISM Provider Store: PID=4104 Failed to Load the provider: C:\Windows\TEMP\0555ABC5-006D-4C3F-B79F-EA0E723FA971\TransmogProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2013-01-11 16:27:07, Error DISM DISM Package Manager: PID=4104 The package WinPE-Scripting-Package is not applicable to the image. - CPackageManagerCLIHandler::Private_ProcessPackageChange
2013-01-11 16:27:08, Info DISM DISM Package Manager: PID=4104 Error in operation: the package is not applicable. (CBS HRESULT=0x800f081e) - CCbsConUIHandler::Error
2013-01-11 16:27:08, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/TEMP/BootImages/{DADCFE01-3557-4058-99CC-2A15EDF905AF}/mount/Windows/System32/config/SOFTWARE,
the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
(The above one appears 8 times - almost in a row)
2013-01-11 16:27:08, Error DISM DISM Package Manager: PID=4104 Failed while processing command add-package. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x800f081e)
Help! Thanks :)
Ben K.
Maybe you are looking for
-
How to uninstall applications from my nokia n97
i installed adictionary to my mobile and the mobile said that it not compatible with phone continue anyway and i said yes and the application has been istalled but it does not work and i want to unistall it when i goto application manager and select
-
Hi everyone, I just wanted to create a new Project Build-Script as I stumbled upon this Checkbox (for auto-generating my Script): "use oracle java compiler for javac task" Can anybody tell me where I find a list of features this compiler provides in
-
How to read a PDF file content???
Hi Experts, I need to read the pdf file content. Pdf file is in some repository I m unable to read pdf data with getContent() function. Please suggest me a way to read the pdf file Help will be appreciated and rewarded
-
Multiple Doc Types for a given Protocol Revision
We ar a large EDI shop. In our scope we have multiple Protocl Revisions and Multipl Document Types tied to the Revision. For Example we have Protocol Revision X12_4010 and multiple Documents 850,856,860,824,997. I am able to get docs through but only
-
RME 4.3.1 not showing devices in the device select menu
Windows Server 2008 Standard LMS 3.2 with RME 4.3.1 When I try to select devices to check/compare device configurations in the RME Archive Mgmt menu (RME -> Archive Mgmt -> Compare Configs) no device shows up for me to select. I know the configuratio