TG797n in bridge mode works fine with Telstra Air
Just fyi,I have the Telstra TG797n in bridge mode and works fine with Telstra Air. The Telstra Air and Fon Wifi SSID are still visible.That's great....
Thanks for letting the Crowd Support community know about this 888. From what I've been seeing seems to work OK for some and not others, obviously how the setup is configured in the background and overall I'd say.
Similar Messages
-
Does Bridge Mode Work only with Apple Router?
Can I use an Airport Extreme Router, in Bridge Mode, as a wireless bridge in a network that does not use an Apple Router?
Situation: Wifi Hotspot from Smartphone connects to Dlink Wireless Bridge in other room allowing Wifi access to printers having only Hard-Wired Ethernet connections. Trying to do the same with an Airport Extreme, with same network name and password, in bridge mode, to provide a PC internet access through the Ethernet connection to Airport Extreme. Cannot seem to get the Airport Extreme in Bridge Mode to function as a wireless bridge on this network.Are both of your AirPort Extreme models the "ac" version?
So Base Station (2) would be set to bridge mode, hard wired to Station (1). Base Station (2) - I believe in this configuration will broadcast the wireless signal from Station (1), the router, with all DHCP addressing handled by Station (1).
No, Base Station 2 would not broadcast the wireless signal from Base Station 1. Base Station 2 would broadcast its own wireless signal, which it derives from the Ethernet connection coming from Base Station 1.
You don't have to worry about "bridge mode" if you use Apple's "wizard" to set things up in AirPort Utility.
If the wireless on Base 2 is configured to use the same wireless network name and password as Base 1, then Base 2 will act like an "extender", and it will seem as if you have one "big" network. This type of setup is called a Roaming Network.
Base Station 2 would only broadcast the wireless signal from Base 1....IF....Base 2 was connecting using wireless. But, you changed the question to ask about Base 1 and Base 2 connecting using Ethernet. -
Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode. What changes I have to made to work great in iOS 7 also.
I rewrote code for debugging purpose and tried to catch error using GetLastError(); method,
but it only printed 0. Below is code snippet; I think Create() throw an exception
and code goes to catch block.
LONG ConnectTS(CString strIP, UINT n_Port)
try{
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
// Exception Line
n_Err = GetLastError();
return NET_INIT;
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image
System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Output: -
ConnectTS is calling Create [is going to call]
Image System
0 -
Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi
and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!! -
My husband's 3GS IPhone will not recognize a Wi-Fi connection at home or work. We have tried turning it on/off as well as turning airplane mode to on while turning it off then back on again. My 3GS IPhone is working fine with our router at home. Please advise what our next step should be. Thank you for taking the time to read this post!!
Just to double check you tried eveyrthing take a look at this link http://support.apple.com/kb/TS1398 .
Can also try powering off the home router, then the phone, and then power up the router wait for the signal and then power up the phone and see if he can connect. -
I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydasOk... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options. -
Powermac G5 won't boot - but safe mode works fine!!!
[The computer described below is a Powermac G5 dual core 2.7gHz, purchased in late 2005, running OS X 10.4.11]
Here's an odd thing... a few months back, my powermac stopped booting. It wasn't a power supply issue. I would get the white screen with the apple to come up, but when it was time for the blue screen with the user logins, the screen would go black.
I tried swapping out all the RAM, and nothing worked. Was able to get safe mode to work, once, and then never again. Finally I broke down and took my baby to Tekserve.
Tekserve took a MONTH to get it back to me, and they claimed it was a bad RAM set. This sounded really odd to me, since I thought I had correctly tested several sticks of RAM, and even no RAM, without any success. But I'm not one of the experts, so, hey. My computer was running again and that's all I cared about.
Well, now, about 3 weeks later, my computer will not boot. It started with the loud fans. Now I'm not having any fan noise, but it still won't boot. Here's how I've troubleshot it so far:
- The computer boots FINE in safe mode. I verified the disc in safe mode, and everything checks out. Everything also checks out using fsdk -fy in single user mode. So no disc problem, apparently.
- When I reset the PRAM using crtlopt+pr after the chime, the screen resolution changes from 1200x1024 to 800x600. After the white screen, I do get the blue screen, but WITHOUT any user login, and the mouse cursor does not show up.
- When I reset the NVRAM using open firmware (reset-nvram, set-defaults, reset-all), I'm back to my normal problem of white screen followed by black nothingness (and emotional despair).
Tonight I'm going to try swapping out the RAM again, but if that doesn't work, what's next? I don't know where I put the original Hardware Test DVD that came with the powermac... is there a program I can buy to see if this is my logic board, without bringing the powermac back into tekserve? I live in NYC and have no car; bringing this heavy item into Manhattan is a real issue for me!!!
Anyways, any and all info is greatly appreciated. I really hope I'm overlooking something obvious. Natch, neither Apple nor Tekserve want to give me any advice without me shelling over more of my hard-earned cash. And this all went down 3 months after applecare expired... sigh...Very interesting... they're telling me (at Tekserve) that this problem is caused by bad sectors in my SECONDARY drive. Doesn't make any sense to me at all, but that's what they're saying... pretty sure the RAM and video card are fine. I tried resetting NVRAM and PRAM, and that did nothing... safe mode works fine, as I mentioned... even got it running in normal mode for about 30 seconds one time.
It's the shop now, so we'll see, when I get the computer back, what the real problem was. It makes me flabbergasted that bad sectors in my secondary drive could have any effect whatsoever on boot! -
Hotmail has an EMOTIONS tab which works fine with IE but does not work with Firefox. Is there a fix?
I cannot use the emotions tab in the latest Hotmail. Nothing appears. It works fine with IE. Is there a fix?
Works fine here on Linux. Make sure that you do not block [[JavaScript]].
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Airport express (802.11n) in client mode: works fine but problem
Hi,
I use the airport express in client mode on my existing wireless network (router netgear dg834n and macbook pro).
The client mode works fine: I have connected it to my existing network with WPA2 security system and also mac adress filtering in the router.
I also have connected the Airport express via ethernet to my satellite receiver and it is always connected without interruption, and always green.
BUT
i always lose the possibility to use airtunes. I mean: When I go to itunes or if I try to connect to the airport interface, I can't. I have to plug it off from electricity, and plug it on again, wait the connection, and I can have access and use itunes. Then, If my Mac goes into sleep mode and then wake up again, I lose the airtunes connection and the connection to the interface. Meanwhile, the light is still green and my sat receiver connected.
Please help me!
Thanks
ModaInstead of using WDS, you should take advantage of the "Allow this network to be extended" option that is available for the 802.11n AirPorts including the TC. WDS only operates in the 802.11g radio mode.
Here's the basic setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility). -
My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please?
It can be the bridge. It could need firmware update. or the FW ports may be an issue. LaCie seemed to invent the phrase/tip 'resetting firewire ports' due to the issues with their drive cases.
You can try an SMC Reset.
So far I have avoided name-brand and tend to see them mentioned. Often with a new OS (though you are on 10.6.8, but when 10.6 came out there was a common complaint and thread of users: FW or USB worked but not the other interface). -
I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me....
Thanks in Advance.
Neeraj@iDevAfter a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
I want to assure that Xcode 4.1(Free Version) and PhoneGap(1.1.0) works fine with Mac OS x Lion. Thank you.
I experience the same. IMac 27', bought just 6 weeks ago (2011), then updated from SL to Lion and now the fun begins. Crashes, crashes, crashes.... Repaired volume yesterday, repaired access rights, now even in safe mode it crashes after 2-3 mins and I am in endless loop of boot-crash-boot-..., need to pull the plug.
Brand new hardware, literally unused ( some photos, nothing more), 1.700 €.... Got an iPhone, an iPad as well but I can't tell you how disappointed I am now! As someone said before, I bought an iMac to use it and not read kernel logs, repair volumes, search for help for days....
Thoughts? -
TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.
Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.
Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.
-
macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before
If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton -
when i go to a website that requires a security code be typed in, the web site appears but the security code to be typed in is blank, however it works fine with Internet Explorer
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
* You can see image settings in Tools > Options > Content: Load Images
* You can see all exceptions in Tools > Options > Content: Load Images > Exceptions
* You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)
Some security software and extensions also can block images.
See:
* [[Troubleshooting extensions and themes]]
Maybe you are looking for
-
Ipod Nano 2g is not reconized by Windows Vista or Explorer
Hello I just got this iPod from my friend and i went to go lock it and I totally forgot the password. And I haven't even added any music yet. And I asked my friend if he knew the password and he said no so I am stuck with locked ipod and a Windows Vi
-
Library list came back after reformat??
OK, this is just too weird. I reformatted my computer. I assumed that I lost my library and playlists. I reinstalled ITunes after the reformat and then I found that all was restored as it was before the reformat! Please, someone explain this one to m
-
WIDESCREEN MOTION PROJECT NOT WIDESCREEN IN FINDER PREVIEW (HENCE IN DVDSP)
Howdy folks, This seems like an easy one but I haven't been able to figure it out after a long time of trying and internet searching. I have a Motion project with the following "project properties":- Preset: 1080i50; Width 1440; Height: 1080; Pixel a
-
REMOTE_LOGIN_PASSWORDFILE parameter
Hi pls let me know the diff. between REMOTE_LOGIN_PASSWORDFILE , when set to NONE,EXCLUSIVE mode. Are there any other modes of this parameter. - (Is it only NONE/EXCLUSIVE) Set the value of the REMOTE_LOGIN_PASSWORDFILE parameter to NONE. Set the val
-
Leopard does not support reading/writing to SD card via network?
I have a Pixma MX700. I can read and write to SD cards using the card reader built into this machine ... IF I use Windows XP. Leopard will mount the card and allow me to view it contents but the minute I try to import a file to my iMac, I get error c