TG797n v3 log on to 10.0.0.138 User name and Password for wireless set-up

I have a TG797n v3 on Windows 7 to a Dell XPS via ethernet cable. Has been working fine, but. . . just aquired an iPad Mini for family use.When trying to configure the iPad Mini, I can't get past the log in requirements of the "found" wireless network. My laptops read it OK but the iPad keeps asking for a Password for the Telstra***** wireless network. I have tried every conceivable password I have ever used without success.I tried resetting the TG797, (by switching off the power for 1 minute, and pressing the rest button for 20 seconds, and leaving the power on and pressing the re-set button),and now it is asking for a User name AND a Password to enable log in to 10.0.0.138. I can't even get to the set-up page anymore!! I have re-installed the software from the CD that came with the T-gateway, but at no stage does it ask for a password. It asks for the SSID and the Wireless Key, but nothing else! and connection to the internet is established.(Otherwise I couldn't type this, could I?) So, where, and how, do I either retrieve the Password hidden in the TG or reset the password the iPad is looking for???I have configured the TG797 by disconnecting and re-connecting (no passwords asked for) I have searched all the Help topics and they ALL say " Just enter your User name and Password" . . . yeah, great if you can remember it or even resetit!! Please, someone, there must be a simple (or complex) answer as a solution. Thanks in advance, Ian King. (Telstra help, . . . anyone?)

Hi dumbojojo,
Im sorry to hear that you are having difficulties,
The password you need is located on the underside of you modem unless you have already changed it yourself. It will often be listed as a WAP PIN.
If this doesnt help please see here Change wifi password or here WiFi Troubleshooting
Finally, you are still having issues, please contact support on 133933 or Live chat here http://tel.st/hsc3
Regards -

Similar Messages

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

I am having the same problem; it started about 24-36 hours ago.
I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
iPhone -- returns incorrect ID / Password
iPad -- Same
Mail.app on Mac -- returns incorrect password error
icloud.com -- allows me to log in and use all functions accept mail. When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode. They generated a new strong password and sent it on to "Engineering."
I suspect there are a small number ofo users like you who are affected with the same problem I am. Too small a number for it to be reported as an outtage. I suggest you call Apple and open a case to have your mail investigaged.
Hope this helps...

HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have the same problem.. EXACTLY. . When phoning Apple Support they had trouble understanding my problem and couldnt find any type of solution. No one seems to take responsibility for GameCenter issues. The assistant escalated the problem but no one could find an answer. .
The only idea was to set up a new apple id, hence a new GameCenter account. . But that would loose all the itunes data. Anyone got ideas ?

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

You must supply a valid User Name and Password to log onto the system

he installing Hyperion 9.3.1 on a server, I installed and tested successfully Shared Services, Essbase Administration Services, Essbase Server, Essbase Client ........ my problem is when installing Reporting and Analysis
Services and installed without problems UIServices in confuguratio utility comes a list of products to configure (Financial Reporting, Web Analysis Planning .... .... among others), first configure Financial Reporting and Web Analysis, when done reboot the machine, then wake up coughing the service entrance to http://localhost:45000/workspace, correspontiente and I get this message "you must supply a valid User Name and Password to log onto the system"
I need an urgent solution k and the above does not work until the time
or failing to address where we can solve this

Hi,
First of all really you should be going through the webserver plugin port if you want to access the other components through workspace.
e.g. http://localhost:19000/workspace
If you entering the correct login details and the account you are using is provisioned then you could check out what information is in the logs :- \Hyperion\logs\BIPlus\SharedServices_Security_Client.log
Cheers
John
http://john-goodwin.blogspot.com/

Invalid User Name and Password when logging onto BPM Workspace (v9.3.1)

I have installed Hyperion Planning and the related/required products. When I attemp to log on to Workspace, I get the following message;
'You must supply a valid User Name and Password to log onto the system."
I have tried using the native 'admin' account, and an NTLM account that I have setup. Both of these accounts work for logging onto the the User Management Console and to the Essbase Administration Console, and I have provisioned both of them with full admin privileges.
Has anyone encountered this issue?
Thanks,
-K

Thank you all for the responses so far.
On the first response, I had already provisioned an NTLM user that is a member of the local Administrators group with all administrative roles, and also refreshed security in EAS prior to submitting this inquiry, so that did not solve the problem.
On the second, I cannot navigate to ../workspace/browse/configinfo without logging in so I am unable to review this information.
On the third response, where do you provision the user to BI+? If I open the User Management Console, there are four root roles each with a tree underneath: APS 9.3.1 Server, Analytic Servers, Business Rules, and Hyperion Shared Services. Under each tree, I have provisioned the 'admin' user and the NTLM user for all roles, including Administrator, Dimension Editor and Application Creator under Hyperion Shared Services -> Global Roles. Should there be a BI+ tree? If so, it is not appearing on the list.
Thanks for any additional info anyone can provide.
-Ken

Log on the other computer with user name and password

How to use labview to write a software to log on the other computer with user name and password?

Jimmyzeng wrote:
Nobody can help on this?
Besides repeatedly asking the same question in thread after thread, you are not providing enough information to answer the question. You have been given answers already stating that operating systems do not make this very easy to do using programs for security concerns. In addition, the authentication process varies depending on what service you are communicating with. You really need to provide more information if you want to get meaningful answers to your questions.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

I had to reinstall osx on my imac and now need to log back in to rstart the systemI fogot my name and password for the computer.How do I find it

I have had to reinstall osx and am now trying to log on to my power mac g5 and have forgotten my name and password
how do I find it?

1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Reset Password from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Reset Password.
Or do you have Firmware Password Protection set up?

TS3899 When i check my email I get the message "Cannot Get Mail. The user name or password for "Gmail" is incorrect". The user name and password are definiately correct, I can log on through safari. This worked fine this morning!

My gmail account has stopped working on my iphone, saying the user name or password is incorrect, but both are definitely correct. I have tried restarting the phone, deleting the account and setting it up again, and checked that I can log on through safari. It had been working fine until this morning! Any ideas how to fix this?

Turn off 2 step authentication on your gmail account in a browser. It should work fine afterwards.

I may nhave been hacked..cant log in to admin on notebook says user name or password is bad...how do i fix it

i think I been hacked cause I cant log in to admin error says name and password bad so how do I recover my computer

i think I been hacked cause I cant log in to admin error says name and password bad so how do I recover my computer
please please help fast
I have a Toshiba mini notebook and it runs windows 7 but have all the updates and went on and made me admin and put password so my granddaughter would have her own and I downloaded Microsoft safe tool for kids and now this
ok a lot of help here
no one helps here so ill go somewhere else

My Mac OS X is not letting me log in. When I type in my Name and Password it shakes.

My Mac OSX is not letting me log in and shakes when I put in my password

That means either your login (name) or password is wrong.
Check you login (name); check your password; check hether caps lock is on; check capitalization.
G

I can't log into my email says user name and password incorrect

I can't not log into my iPhone email it says user and password incorrect I also am having the same problems logging into my Facebook account

See:
* https://support.mozilla.com/kb/Cannot+log+in+to+websites
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I bought one several months ago. it sits beside my macbook pro. my macbook pro logs onto itunes successfull, but the appletv will not. when i enter my user name and password, it simply times out?

while my macbook pro will log on successfully to itunes, the appletv times out every single time and i cannot log on.

while my macbook pro will log on successfully to itunes, the appletv times out every single time and i cannot log on.

TG797n v3 log on to 10.0.0.138 User name and Password for wireless set-up

Similar Messages

Maybe you are looking for