TH_DELETE_MODE not working in Web GUI after EHP7 upgrade

Hi
After upgrading to EHP7 the function module TH_DELETE_MODE is not working in the Web GUI. If I start the TH_DELETE_MODE in SE37 with the default paramter "1-" I'll get the HTTP error code 500. We use the function module for our webdynpro to logout but it is not working anymore.
Any idea or recommendation?
Thank you and best regards, Ronny

Your server-side include has all of the HTML on it for a full
page.
Strip everything from it except the stuff you want to
include.
http://www.fordwebs.com/mx-asp/ssi-index.asp
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"ValsGalore" <[email protected]> wrote in
message news:f019c0$in1$[email protected]..
>I just recently began work on an existing Web site, which
includes the file
> nav.asp on every page. After I made some changes to one
of the pages (it's
> temporarily located at
http://www.enviroglasproducts.com/reps5.asp),
I found
> that when I closed it and reopened it in Dreamweaver, I
could no longer see the
> page in preview mode.
>
> It shows my </head> tag highlighted in yellow, but
won't let me click on it.
> In code view, the <table> tag, which is the first
tag after <body>, is "marked
> as invalid because it's an overlapping or unclosed tag."
I've been over this
> document several times, but I cannot find any errors in
the construction of the
> table.
>
> If I copy all the content into an identical page, it
will look fine in
> Dreamweaver until I close it and reopen it, and then I
will have the same
> problem.
>
> Oddly, when I remove the  from the second cell
> of the main table, then everything looks fine.
>
> Other points worth mentioning are that (until I delete
it), nav.asp shows up
> in its proper location in reps5.asp, but nothing else
does except for the image
> that appears right above it.
>
> In other pages on the site, the included nav.asp does
not show up in
> Dreamweaver at all.
>
> Can anyone think of why this is happening?
>
> Thanks!
>

Similar Messages

2602e Reset to Defaults Except IP not Work over Web GUI

Hello,
1. Set a Static IP
2. Apply & Save Configuration
3. After Reboot the IP is correct.
Then do Reset to Defaults Except IP in the WEB Gui.
After Reboot the AP loos the static IP and get a DHCP Address.
Reset to Defaults Except IP = Reset to Defaults !
Whats Wrong ?

OK, here is:
Writing out the event log to flash:/event.log ...
*Jan 22 17:44:56.675: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
*Jan 22 17:44:57.547: %SYS-5-RELOAD: Reload requested by on console. Reload Reason: Reload Command.
Write of event.log done
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Numonyx Mirrorbit (0089)
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 23 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Ethernet speed is 1000 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a"...##########################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Tide MB - 32MB of flash
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 14 seconds.
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Boot CMD: 'boot flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a;flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a'
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a"...#######################################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a" uncompressed and installed, entry point: 0x1003000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
Tide MB - 32MB of flash
Initializing flashfs...
flashfs[3]: 212 files, 7 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31739904
flashfs[3]: Bytes used: 15058432
flashfs[3]: Bytes available: 16681472
flashfs[3]: flashfs fsck took 12 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCC
Copy in progress...CC
Copy in progress...CCCCC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)
POWER TABLE FILENAME = ram:/B2.bin
Radio1 present 8764 8000 0 88000000 88010000 4
POWER TABLE FILENAME = ram:/B5.bin
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-SAP2602E-E-K9 (PowerPC) processor (revision A0) with 204790K/57344K bytes of memory.
Processor board ID FGL1711Z6K6
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 10:F3:11:C2:2E:3A
Part Number                          : 73-14511-02
PCA Assembly Number                  : 800-37898-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC17093TXF
Top Assembly Part Number             : 800-38357-01
Top Assembly Serial Number           : FGL1711Z6K6
Top Revision Number                  : A0
Product/Model Number                 : AIR-SAP2602E-E-K9
Press RETURN to get started!
*Mar 1 00:00:16.035: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 1 00:00:16.151: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (11)APAVC: WlanPAKs 18174 RadioPaks 17566
*Mar 1 00:00:23.131: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:29.443: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:29.503: initializing dot11 onplus
*Mar 1 00:00:29.667: not a autoconfig enabled device!!!
*Mar 1 00:00:31.671: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:32.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:01:18.015: Starting Ethernet promiscuous mode
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 22 17:44:57.007: %CDP_PD-4-POWER_OK: Full power - HIGH_POWER inline power source
*Jan 22 17:44:57.015: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
*Jan 22 17:44:57.015: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to downERROR: Failed to configure ethernet promiscuous mode. Interface Descriptor mismatch
*Jan 22 17:45:01.667: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (0-0)
*Jan 22 17:45:01.667: DPAA Initialization Complete
*Jan 22 17:45:01.667: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Jan 22 17:45:02.667: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Jan 22 17:45:06.863: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.16.33.216, mask 255.255.254.0, hostname ap

Currency conversion not working in web templates after migration to 7.0

Hi Gurus,
I am experiencing an interesting issue in BI7. I have my web-template reports build on one or two queries. When I execute the queries from RSRT I have all the amounts properly converted to USD (there is a bex variable defined on the query level with USD as default). However, when executed from web-browser the conversions does not work when the report opens. Now, when I open the "cur. translation" option from KF popup menu and choose the same values I chose on the variable screen - everything works fine.
Have you experienced similar issue(s)? Please share your experience and kindly avoid pasting links for documentation - these I have already reviewed and it's pointless.
Thank you, KAT

Hi Nitin,
You may wish to take a look at below for few insights -
OSS notes 328181 and 762951 as a prerequisites.
Failure to follow the instructions in those notes may probably result in data loss.
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002662832005E
Re: Delta queus during upgrade
Assign points if this is helpful.
Regards,
Anil

Using htp.p in Apex 4.2.2 not working in plsql region after an upgrade?

Hi
After I upgraded Apex to 4.2, in a region PL/SQL the code
htp.p('test');
not working and I've the error :
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -6502
ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 15577009301937579
component.name: Légende
error_backtrace: ORA-06512: at "OAS10GR2.OWA_UTIL", line 328 ORA-06512: at "OAS10GR2.HTP", line 1322 ORA-06512: at "OAS10GR2.HTP", line 1397 ORA-06512: at "OAS10GR2.HTP", line 1689 ORA-06512: at line 1 ORA-06512: at "SYS.DBMS_SYS_SQL", line 1204 ORA-06512: at "SYS.WWV_DBMS_SQL", line 1064 ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 4613 ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 3220
Thank you !

Try using:
sys.htp.p('test');
Not sure why the synonym to HTP is referencing a HTP procedure owned by OAS10GR2 (OAS10GR2.HTP).
Did your upgrade complete successfully?

Download to excel not working in web gui

Hi All,
I created a transcation for a z report and selected the radio button Easy Web Transcation and check box SAP GUI for HTML while creating the transcation since this transcation link has to be given on SRM portal .
Now when we click link on SRM portal and execute the report everything is fine but when we click the button Local File from menu , a popup comes in which we select Spreadsheet radio button and press continue , a message is displayed in status bar of explorer
load :class Query not found
and the download never complets it only shows the hourglass.
How to solve this?
Regards,
Anubhav

Hi @all
Excel Export needs an installed Java RE on the client side
I solved the problem by installing JRE 1.6.0.
Regards
Marcel
Edited by: Marcel Hündler on Feb 16, 2010 5:30 PM

Drop-down box does not work with Web GUI

Situation:
On CE5 (ECC 5.)-> transaction "MM02"
-> click on drop-down for "Material"
-> see distorted pop-up
Solution:
apply kernel patch #144.
ITS is part of the Basis, starting with WebAS 6.40

You wouldn't happen to be using Vista's Home Edition are you? I work from home and have Vista Home on one of my PC's and it has the same issue when I'm connected to 2004s systems. Vista Home isn't supported. Only Vista Prof. Oddly, if I'm using the same GUI to attach to 4.6C releases, I don't have this issue.

Transaction codes is not working in WEB GUI URL

Hi All,
We configured Integrated ITS in ECC 6.0 it is working fine but
if i enter any Tcode in URL but it showing SAP Easy access screen only .i want run some tcode throug URL .Can you please let me know how solve this issue.
Thanks in advance
Regards,
Hari Prasad.L

Hello Hari,
Your URL should probably look something like:
http://hostname:port/sap/bc/gui/sap/its/webgui?~transaction=sm50
this would start webgui in transaction SM50.
You can add parameters to the URL with the & so:
http://hostname:port/sap/bc/gui/sap/its/webgui?~transaction=sm50&sap-client=100&sap-language=EN
this would start webgui in client 100 with language English in transaction SM50
Edgar

Ark not working with rar files after unrar upgrade

Today after a #pacman -Syu the package unrar was upgraded from 4.2.4 to 5.0.2. After that, Ark cannot extract .rar archives. Did anyone else experience this problem?
Starting Ark from the command line doesn't show any error. I also tried installing libunrar (which was not needed before and also not installed as dependency) but it made no difference.
Using unrar from the command line works fine, though, so it's just Ark not being able to use it for some reason.

Bogart wrote:Sorry, maybe I should have specified that Ark is the archive extracting tool used by KDE. A graphical frontend for gzip, unrar, etc...
Ahh fair enough. I have no experience with KDE whatsoever, so I'll leave others to help you work through this problem Best of luck!
All the best,
-HG

IMessage not working on my iPad after os6 upgrade.

iMessage has stopped delivering my messages. I upgraded my ipad to os6 two days ago and been having issues ever since. I have restarted and reset everything. I had brief success after doing a factory reset but after about six messages it cut out again. This is extremely frustrating!! Apple, fix this!

Absolutely similar problems to many others with ios 6 upgrade, by no means am i a computer/tablet buff
but tried (many times) to log into yahoo mail,and it continually logs you out via error message requesting re- submission of password, which it does not accept.
Have raved about ipad(until yesterday upgrade) and was about to purchase i phone but not now, why is it that when a massive error has clearly taken place that the company concerned does not front up the situation and inform users they will work to resolve the problem which would satisfy your customers.
But to all concerned with yahoo mail ,its not you it is the upgrade that is the problem.
It is a shame to see £500 go down the pan, but think a different Tablet purchase is on the cards and one that has
Google Street View available or just maybe Apple can restore the faith of it,s supporters by way of communication?.
ipad 2 , ios 6

Colors not displaying in WEB GUI

Hi,
In WEB GUI, I am unable to see the colors in my ALV Grid when the fields are in editable mode where as in SAP GUI am able to. There is no problem when the fields are in non-editable mode.
Can you help me out to view the colors in my ALV Grid for the editable fields in WEB GUI?
Thanks,
Adithya M.

You might be out of luck, because usually there are no specific settings for the WEB GUI. And one of the problems with WEB GUI is that it doesn't support all the functionality which is offered in your standard GUI. So it is possible that this is exactly one of the scenarios WEB GUI doesn't support. That is also the reason why not all SAP transaction work in WEB GUI. We had issues with parts of TEM transactions not working via WEB GUI.
Michael

LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue

BI Publisher not working with Web Cache

BI Publisher not working with Web Cache
I'm trying to enable BI Publisher to run from the internet. I have Web Cache (AS10g rel 2) in an internet DMZ, trying to work with BI Publisher running on a AS10g rel 3 server in a application DMZ. BI Publisher won't allow Web Cache to hide the URL after login. It tries to use the application server name as a URL and gets lost, since this is not resolvable from the internet. We have Content DB, other J2EE application installed in this same configuration, and it works fine.
This is duty managed as of today. They required an enhancement request, which I submitted. SR 6696835.993 -

Currently an enhancement - it was logged as that but IMHO its a bug as other Oracle products work OK - it kinda depends on whether its an ORacle strd to work with webcache or not. Suffice to say, we are investigating the issue and will update the er/bug soon.
Tim

In built dictionary is not working in I books after I downloaded ios7.02

Built in dictionary is not working in I books after I downloaded ios7.02

I'm having the same problem. Once I download the dictionary it turns to an X and nothing is downloaded. I've restarted several times. Any other ideas?

"Execute" is not working in web reports

Friends,
" Execute" link is not working in web my report. And also the selection screen is blank for style sheets. Do you have any idea about the cause?
Joe

Also check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

BEx Analyzer not working in SAP GUI 7.10

Dear All,
BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
OS: Windows XP SP2
Installed the following softwares (in the sequential order):
1. Microsoft .Net Framework 2.0 SP1
2. MS Office 2003 (without any service packs)
3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
While BEx Analyzer 3.5 runs fine, 7.0 does not.
Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
Thanks and Regards,
Sachin.

Hi All,
This problem is due to .NET 2.0 assembly(nothing but .dll's),
Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
If it does and still getting the error, then follow these steps,
1) Uninstall office03
2) Uninstall GUI
3) Uninstall .Net 2.0
4) Reboot
5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
5a) Reboot
5b) Install .net1.1
5c) Reboot
5d) Install .net2.0
5e) Reboot
6) Install office 03
6a) Reboot
7) Install .PIA's (O2003PIA.MSI)
7a) Reboot
8) Install setupall.exe for GUI
9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
10) Reboot
Let me know if you encounter any problems.
OR....
Update the Latest Patchs of GUI & Bex.
BI710SP03_300-10004472.EXE
bi710sp04_400-10004472.exe
gui710_6-10002995.exe
Hope it helps you...
@shaik

TH_DELETE_MODE not working in Web GUI after EHP7 upgrade

Similar Messages

Maybe you are looking for