THAI dot matrix printer model

Hi,
We have a unique problem with respect to printing Bank Checks on THAI characters.
The existing printer being used is Epson 1170 which is a dot matrix printer.
Customer wants to replace this with new printer model which supports continuous printing as well as THAI characters.
Can anyone please help with the model being used for TH check printing at your environment. Thanx a ton for your help.

Hi Madhaven,
Since you need to switch to new printer, you can use HP printers.
Please check this link
http://www.hpgsc.com/solutionfile/SOLUTIONFILE2623.pdf
Let me know, if any more help is required.
Thanks,
Anand.
Reward points appropriately.

Similar Messages

BMP image not printing on LIPI Dot MAtrix printer

Hello everybody .
I am facing a promlem while printing a signature ( bmp image ) in a report .
In print preview it is showing coreclty but while printing to LIPI Dot matrix printer model TALLY 2500 that Signature( bmp image ) is not getting printer.
Can anybody let me know wether any setting is to be done from SAP side .
Thanks in advance .
Regards
Dhaval..

Hi Raje,
Try to take the print in inkjet or laserjet printer
just for confirmation purpose .
if it prints in that and doesn't print in dot matrix then the problem is with the dot matrix.
In that case ask the basis guys to install the relevent device driver for that dot matrix printer( as normally they would have installed some generic driver ).
Hope this helps.
Regards,
Guru
*mark helpfull answers

Does anyone know of a dot-matrix printer compatible with Mac OS X Lion?

We need to upgrade our system at work to Mac OS X 10.7 Lion. We need to find a dot-matrix printer to print our multi-part forms. We have been using an Epson FX-980 and FX-890N under OS X 10.4 (Classic Mode). I've tried to use the FX-890N (newer) using the Epson 9-pin driver supplied with OS X 10.7. The print quality is so bad it's almost illegable. I also tried different fonts in the hopes to improve print quality but have not been able to improve.
We have GOT to get to OS X 10.7 Lion, but cannot give up our impact printing capability. We are willing to buy a new impact printer if needed.
Please HELP!!!
<Email Edited By Host>

I tried your link, but it came back with no page found at Lexmark. We just purchased a LexMark Forms (dot-matrix) Printer Model 2580n after takling with sales support at LexMark. They confirmed that this printer worked with Mac OS X 10.7 (Lion). HOWEVER, after receiving the printer, and unsuccessfully attempting to get it to print, I called their tech support. They told me that their sales dept was incorrect, and that they do not have a dot-matrix printer that will work with OS X 10.7. They are in the process of issuing me an RMA# to return the printer with a full refund.
Nothing would make me happier than for you to prove them wrong. I DESPERATELY need to find a dot-matrix printer that does work with OS X 10.7.
Any additional input you could supply would be greatly appreciated. I look forward to your reply.

Is it possible to connect a dot matrix printer to MacBook Air? If yes, please suggest a good application for printing bills in a shop.

Is it possible to connect a dot matrix printer to MacBook Air? I need to print receipts in my textile showroom. Please suggest good applications for printing receipts and saving daily sales records.

Prath33k wrote:
Is it possible to connect a dot matrix printer to MacBook Air?
yes. As long as it is a newer one (means not 15-20 years old). Do you have one? If so, provide the make/model. If you do not have one, which ones are you looking to purchase?

Sales invoice Smartform printing in dot matrix printer in sucession

Dear all,
I am trying to Print Sales invoice on Dot matrix Printer.
My First Invoice is printed ok, but if i try to print second invoice without manually adjusting the paper the alignment on printer goes haywiered.
Do we have some option in smartform where we can trigger new page command.
Regards,
Gaurav Sood

Hi Amiya,
you need to check the paperformat which is used. I'm pretty sure that there is a wrong paperformat selected. The supported paperformats are published in the official documentation of the printer-model.
~Florian

Crystal Report printing on dot-matrix printer

Hello,
I've developed an application using VB.NET and Crystal Reports in VS2008. The report generated gets printed correctly on modern laser or inkjet printers. However, the entire formatting gets affected when I print these reports on dot matrix printer. Apart from that. the print speed is very slow. I tried exporting the report to PDF, DOC and other formats - but no solution. There was Export to Text function, which is not working in Crystal Reports now.
After a research on this issue, I found out few links to some solutions - which actually doesn't work. These links are as follows:
http://social.msdn.microsoft.com/forums/en-US/vscrystalreports/thread/e24a8084-ad53-48bc-a7d5-065ef82636ac
http://social.msdn.microsoft.com/Forums/en-US/vscrystalreports/thread/dd506c66-4cdc-48a7-9fa8-2c6f14daef24/ (Same issue in C#)
I've seen some software, in which, when Print on Dot Matrix (custom menu option) is selected, data is sent to DOS mode and reports are printed from DOS mode.
Is there any solution for this? OR DOS mode is the only solution?
This is high priority issue. Even though we're moving ahead in IT industry, govt. still depend on 4 color dot matrix printer reports.
Waiting for solution
Regards
Mayur Tendulkar | www.mayurtendulkar.com

Also, as of Service Pack 3 Microsoft updated their security models so a new C++ runtime is required. Please see these Kbase articles and Forum posts for more info:
https://bosap-support.wdf.sap.corp/sap/support/notes/0001495319
Forum thread for info Setup And Deployment Problem
Info:
Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update and is available using the link below.
This needs to be installed before installing a setup package that uses the SP 3 merge modules.
http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en
Thank you all again and have a great day
Don

Right side Text not printing in Dot Matrix Print

Hi Gurus,
When i take print of the smartform with Laser Jet Printer its comming fine , but when i print using Dot Matrix Printer the text at right side is not printing.
Printer model : Epson DFX-5000+
Can any one tell me how to resolve this..
Thanks
Ganesh

hi ,
SAPWIN Drivers which support those Epson printers check in SAP (windows support )
These will solve your Problem .
Regards
Deepak.

Clear printout when printing in dot-matrix printer but not in laser printer

Hi Experts,
When I am printing the output for change outbound delivery, output is clear in dot matrix printer like GI and and values are clearly getting printed, but when I use Laser printer no GI and details are fetched?
Kindly revert on this please, asap.
Thanks
Shireen.

Hi Amiya,
you need to check the paperformat which is used. I'm pretty sure that there is a wrong paperformat selected. The supported paperformats are published in the official documentation of the printer-model.
~Florian

Can I use a old dot matrix printer with my mac

I want to add a old Panasonic KX-P2023 and use it as my printer. I have a mac osx 10.7.5 is this possible??

If you are successful finding an OS X driver for it, you ought to be able to use this cable to connect it to your iMac:
http://www.iogear.com/product/GUC1284B/
I have successfully used that cable to print with every OS X version through Mountain Lion. It works with all other parallel printers I have tried including HP, Epson, and Apple, but I don't have your model Panasonic. When connected, the printer appears in Print & Scan as "ATEN UC-1284B Printer Cable".
I think the driver may be your biggest challenge. There may be compatible drivers from other manufacturers so don't limit your search to Panasonic. Search for an OS X driver for a similar dot matrix printer - consider C. Itoh, Epson, Okidata, or Ricoh. If you find a generic driver use it. Some printers were simply rebranded models manufactured by others. I don't know about your Panasonic though.

Print to Dot-Matrix-Printer

Hi,
My actual job is to create an Report in Oracle Reports 10, running on an IBM AIX Unix Server and direct the output to an Dot-Matrix Printer.
The Report is ready for Preview.
What Parameter should be set as Report_DesFormat for that Dot-Matrix Printer?
I found only the list HTML, HTMLCSS, PDF, RTF, POSTSCRIPT, XML but the Printer can not unterstand any of these formats.
Thanks for any help
Rolf Mamat

Hi.
Using one of graphical destination format can lead to unexpected results. What you should do is to configure your printer at the system OS level. Then you should include that printer into $ORACLE_HOME/guicommon/tk/admin/uiprint.txt file. The line you add to this file should be read as printer_name_you_specified_at_os_level:ASCII:1:some_comment:: For example :
my_dot_printer:ASCII:Testing printer::
Be aware of two colons at the end of the line.
For a destination format you should use one of predefined formats (dflt, wide, ...) or you can make your own format file which should be stored in $ORACLE_HOME/reports/printers directory. And dont forget to define your report design in character units.
Hope this answers your question.
Best regards.

Print PDF Report(XML) in Dot matrix Printer in Oracle E-Biz R12

Hi Friends,
Is it possible to print a PDF Report (xml report) in Dot Matrix Printer in Oracle E-Biz R12 assuming the Dot Matrix Printer supports Post Script.
If so , what configuration needs to be performed from Oracle E-Biz?
Regards,
DB

user4525564 wrote:
Hi Friends,
Is it possible to print a PDF Report (xml report) in Dot Matrix Printer in Oracle E-Biz R12 assuming the Dot Matrix Printer supports Post Script.
If so , what configuration needs to be performed from Oracle E-Biz?
Regards,
DBI do not think it is possible -- Please confirm with your printer vendor if your printer support PDF printing first.
Thanks,
Hussein

Problem with countinuous paper printing in dot matrix printer

Hi All,
I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
I have developed one smartform for this and i have used A4 size page format.
I have tried to change the Printer initialization code to 86 lines for DINA4. Still no change in continuous printing.
     Printer initialization
     Reset after exit
     Cover page
     First Page
     Start of even page
     Start of odd page
     Start of page
     End of first page
     End of even page
     End of odd page
     End of page
     Start of line on an even page
     Start of line on an odd page
     Start of line
     End of line on an even page
     End of line on odd page
     End of line
Printer initialization
# reset
\e\0x40
# select character table 3 -> PC 437 character set
\e\0x74\0x03
# set line spacing 6 LPI
\e\0x32
# set page length 86 lines
\e\0x43\0x46
# cancel bottom margin
\e\0x4F
# set left margin to 0
\e\0x6C\0x00
# select LQ quality
\e\0x78\0x01
# select non-proportional spacing
\e\0x70\0x00
Can any one help me.
Thanks,
Vishnu

Hi Vishnu,
Above you have the following commands:
set line spacing 6 LPI
\e\0x32
set page length 86 lines
\e\0x43\0x46
46 HEX = 70
So the above settings mean 70 lines at 6 LPI = 11.66 inches.
So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
Regards,
Aidan

Dot matrix printing on 15 x12 inch paper

Hi
I have created report for purchase register
Report is so large to print
so i have desiged this report in PDL for dot matrix printer and paper size 15 inch x 12 inch.
When i going to print this report, i not get proper print out
Please tell me the setting regarding to print this report on dot matrix 15 x 12 inch continous paper.
Regds
Kishor

HI
Thanks for you valuable suggestion
Printer at my end is not supported by SAP B1
ok
what is use of Function grouplinenum() in PLD
I wants the follwing output
docnum, Acct Code, Acct_total document_total
1    xyz1    500      1100
      xyz2    600
2    abc1   1000      2000
      abc2    500
      abc3    500
Total          3100     3100
Please study the following query for above and Please tell me it is possible to design PLD
SELECT A.SERIESNAME, A0.DocType, A0.DocNum, A0.DocDate, A0.NumAtCard, A0.TaxDate,
A0.CardCode, A0.CardName, A1.City,
A2.TaxId11, A2.TaxId1, A2.TaxId2,
A4.TAXTYPE, A4.VATRATE, A4.vattaxable, A4.Totvat,
A0.DOCTOTAL, A0.WTSUM,
A5.TAXCODE, A5.formatcode, A5.ACCTNAME, A5.ACTOTAL,
(case when TAXTYPE IS NULL then A0.DOCTOTAL + A0.WTSUM ELSE 0.00 END) AS LabourChrg,
(case when TAXTYPE IS NOT NULL
      then A0.DOCTOTAL + A0.WTSUM - ISNULL(A4.VATTAXABLE, 0.00) - ISNULL(A4.TOTVAT, 0.00) ELSE 0.00 END) AS LabourChrg
FROM NNM1 A
INNER JOIN OPCH A0 ON A.SERIES = A0.SERIES
LEFT OUTER JOIN CRD1 A1 ON A0.CARDCODE = A1.CARDCODE AND A1.LINENUM = 0
LEFT OUTER JOIN CRD7 A2 ON A0.CARDCODE = A2.CARDCODE
LEFT OUTER JOIN
(SELECT C0.DOCENTRY,
MAX(case when C1.nftaxid = -7 then 'L' when C1.nftaxid = -4 then 'C' else 'O' end) as TAXTYPE,
MAX(C0.TAXRATE) as VATRATE, SUM(C0.TAXSUM) as TOTVAT, SUM(C0.BASESUM) as VATTAXABLE
FROM PCH4 AS C0, OSTT AS C1
WHERE C1.ABSID = C0.STATYPE
AND C1.nftaxid in (-7, -4)
GROUP BY C0.DOCENTRY) A4 ON A0.DOCENTRY = A4.DOCENTRY
INNER JOIN
(SELECT E0.DOCENTRY, E0.TAXCODE, E1.formatcode, E1.ACCTNAME, E0.ACTOTAL
FROM
(SELECT D0.DOCENTRY, D0.TAXCODE, ISNULL(D1.ACCTCODE, D0.ACCTCODE) AS ACCTCODE,
SUM(D0.LINETOTAL + D0.LINEVAT + D0.DISTRIBSUM + D0.STCKDSTSUM) AS 'ACTOTAL'
FROM PCH1 D0 LEFT OUTER JOIN PDN1 D1
ON   D0.BASEentry = D1.DOCENTRY AND D0.BASELINE = D1.LINENUM
GROUP BY D0.DOCENTRY, D0.TAXCODE, ISNULL(D1.ACCTCODE, D0.ACCTCODE)) AS E0
INNER JOIN OACT E1 ON E0.ACCTCODE = E1.ACCTCODE) A5
ON A0.DOCENTRY = A5.DOCENTRY
WHERE A.SERIESNAME ='[%0]'
ORDER BY DOCNUM
Thanks

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Need to Take Fast Printing on Dot Matrix Printer Using Report 10g

Dear ,
I need to take a fast output of Oracle 10g reports on Dot Matrix printer
Client runs the report and open in PDF but when he takes hard copy on his/her local printer, then printer works very slow and take huge time to print a single page.
Kindly help me, how can client get the output directly on his locally attached Dot Matrix Printer and fast.
Reports desinged and compile in Report10g R2 and
Middle teir using =Application Server 10 R2.
Thanks and regards.
Priya

Draft mode is not by font. It is a specific printer mode. If you can not manually setup the mode, B1 may not have any abilities to print in this mode.
Thanks,
Gordon

THAI dot matrix printer model

Similar Messages

Maybe you are looking for