Thai input source not correct
Thai input source is not correct. I do have a dual keypad and did not have a problem on Mavericks OS.....Please help
In order for anyone to help you, you really must provide some more detail regarding "not correct". Exactly what keys are not producing the results you expect?
Also it is vital that you tell us which Thai layout you are using, since there are at least 2, Thai and Thai - PattaChote
Finally you should tell us what app(s) you have the problem with. Note that MS Word for Mac is a special case as it does not officially support Thai.
Similar Messages
-
[SOLVED] ALSA input source not not saving on reboot
Just in case anyone else has a similar issue....
An annoying recent development was the ALSA input source not being restored on rebooting. In particular in my case the internal digital microphone on my Dell XPS m1330.
The audio chip is Intel-HDA, reported as "STAC9228" by alsamixer. The primary 'sound device' is alsamixer is listed as PulseAudio, with Intel HDA being an additional device (F6). Under the F4 capture tab, there are 3 input source options, the first kept on resetting to 'Mic' instead of 'Internal Mic 1'. Mic is the front analog mic jack, and as a result there was no Skype microphone functionality each reboot. Easy enough to use alsamixer to reset to the correct input when required of course, but annoying nonetheless.
I tried deleting asound.conf, ensuring alsa was (and wasn't) running as a daemon and using alsactl store, all to no avail. I already have !snd_pcm_oss and !snd-pcm-oss in my rc.conf, and Skype is not controlling any levels.
Finally solved by adding 'alsactl restore' to the startup programs (gnome-session-properties).
Last edited by sultanoswing (2011-05-17 00:56:27)[UPDATE: Internal microphone no longer working under kernel 3.1.1-1 and alsa 0.24-3.]
Sigh. -
Korean input keyboard not correct typing after ios7 upgrade at iPhone and iPad.
korean input keyboard not correct typing at page after ios7 upgrade at my iPhone and iPad.
Report this to Apple via
http://www.apple.com/feedback -
HELP! Input source not registering built-in mic?
Hi all -
I'm trying to record with the mac's built-in mic, but the only input sources I'm offered are (built-in input)!
How do I get Garageband to recognize my built-in mic? I went to System Preferences and then to Sound and clicked on Internal Mic for the input source.
HELP!
M.it depends on the CPU in your computer. assuming intel:
http://www.bulletsandbones.com/GB/GBFAQ.html#intelinternalmic
(Let the page FULLY load. The link to your answer is at the top of your screen) -
How to get input source line number
I wrote a XSLT transformation that checks the input XML for errors.
When the transformer finds a problem, it can terminate with <xsl:message terminate="yes">, which outputs the line number within the transformer XML source. I do so in my implementation to indicate errors.
But i need to output the line number of the input source, not that of the transformer source, because this is the location of the error.
Anybody knows how to do this?
How can i get the current line number of the input source XML text?Hello Fritz!
XALAN reads the entire input file (SAX) before starting with transformation.
So overriding the input stream is no way to find this line number.
I think this would have to be a built-in XSLT functionality within the tag "xsl:message". -
Selction of US or US Extended Keyboard Input Source does not match my US keyboard
Before upgrade from Maverick to Yosemite my US key board matched the diagram shown in Input Sources in Key Board Viewer. Now it has symbols in different locations that do not match my keyboard.
Check System Preferences/Keyboard/Input Sources to make sure that is set correctly. If so, would you post a screen shot so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon or you can drag the screen shot into a reply. Copy and paste doesn't work.
Screen shots -
Hi,
I try to generate a report using a template. In my template I use some cross-reference to refer to one bookmark. For exemple in the first page I created a bookmark for my name and in the header I created a cross-reference refer to my name. The problems is when I run my VI the bookmark actualise perfectly but the cross-reference refer to the bookmark can't actualise with the same value and generates an error : "Error! Reference source not found".
Can somebody help me please!
Nki
Solved!
Go to Solution.
Attachments:
01.jpg 72 KBHi,
When i create the word template, the bookmaks and the cross-reference referred to the bookmark update correctely. The problem is when I try to change the bookmark using "report generation from template vi" the bookmark change but not the cross-reference and the error generated is "Error! Reference source not found".
I make coople reasherch and i think they have no solution for this because : "if the text in a heading referred to in a cross-reference is revised, the cross-reference to the heading may no longer work" (http://office.microsoft.com/en-us/word-help/troubleshoot-cross-references-HP005189368.aspx).
To "resolved" this problem I create an other bookmark in the template who have the same value white the principle bookmark.
I use Labview 2011 and Micosoft office 2010. -
my macbook pro was first installed with leopard and bootcamp 3.2 under windows 7. After update to lion it is no more possible to update bootcamp to 3.3. or 4.0. The report: The installation source ist not correct. What can i do?
auf Deutsch:
Auf meinem Macbook pro war Leopard und bootcamp 3.2 unter windows 7 installiert. Nach dem update auf lion kann bootcamp nicht mehr upgedatet werden. Weder auf 3.3. noch auf 4.0. Folgende Fehlermeldung kommt: Boot camp Dienste: Das installierte Produkt stimmt nicht mit der Installationsquelle überein. ... Was kann ich tun?It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
Error: Derivation Source object, DIMENSION_NAME , is not correctly bound
Hi,
I have installed Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
and OWB 10.2.0.1.0 on Windows XP Professional.
I've created a simple MOLAP dimension with a default hierarchy and one level within it.
I've maped it to source table, deployed and loaded it. I can see its data.
Description of dimension:
Configuration
Deployable: yes
Deployment options: Deploy to Catalog only
Storage
MOLAP
Generate surrogate keys in the analytic workspace
Attributes
NAME::IDENTIFIER::DATA TYPE::LENGTH
ID::NULL::VARCHAR2::25
CODE::Business::VARCHAR2::32
NAME::NULL::VARCHAR2:255
Problem:
When I trying to derive definitions I receive an error in wizard: Derivation Source object, <DIMENSION_NAME>, is not correctly bound.
As result, there are no business definitions there.
This problem goes with all my MOLAP dimensions.
Please, maybe somebody faced with this trouble...Hi,
Are you trying to Derive this into the Business Defintions area? In that case, this is not supported. For MOLAP objects you can use Discoverer and use an OLAP connection, then you will see your dimensions as query objects.
Derive only works for relational objects (e.g. ROLAP storage), and that is why you get that error (not bound) as the MOLAP object is not bound to a table.
Jean-Pierre -
i have this problem,
Tag 'A2B0': Number of input channels is not correct.
Tag 'A2B0': Number of output channels is not correct.
Tag 'B2A0': Number of input channels is not correct.
Tag 'B2A0': Number of output channels is not correct.
I work with Capture One Pro 7, photo editor
what can I do to solve this problem?You may have better luck asking your question here: Capture One 7.x Software for Mac
OT -
SNOTE (Note Assistant) list expected "source code corrections" of a note?
Is it possible, in current versions of SNOTE, to print the "source code corrections" that the note is supposed to contain?
This was possible in "good old OSS" and also, I think, in early versions of SNOTE.
Why do I ask?
Sometimes you have a note that SNOTE cannot handle by itself. You must then open the "splitscreen editor" and guide SNOTE through the process.
In such cases I like to have a listing, on paper, of the expected changes, so that I keep some overview and that I can check the corrections as I go through them.I have found a second possibility - the following little program based on some code found in the 4.6C implementation of SNOTE.
report zztmp_snote_displ line-size 080.
type-pools bcwbn.
parameter p_note like cwbnthead-numm.
data gs_note type bcwbn_note.
start-of-selection.
clear gs_note.
select numm versno
from cwbnthead
into (gs_note-key-numm,gs_note-key-versno)
where numm = p_note
and incomplete = space
order by primary key.
endselect.
if not ( gs_note-key is initial ) .
call function 'SCWB_NOTE_READ'
exporting
iv_read_attributes = 'X'
iv_read_short_text = 'X'
iv_read_all_texts = 'X'
iv_read_validity = 'X'
iv_read_corr_instructions = 'X'
iv_read_customer_logfile = 'X'
iv_use_fallback_languages = 'X'
iv_read_loghndl = 'X'
iv_read_fixes = 'X'
iv_read_customer_attributes = 'X'
* IV_READ_READ_BY_USER = ' '
* IV_READ_SOL_MGR_REFERENCE = ' '
* IV_READ_SAP_STATUS = ' '
changing
cs_note = gs_note
exceptions
note_not_found = 1
language_not_found = 2
unreadable_text_format = 3
corr_instruction_not_found = 4
others = 5
if sy-subrc eq 0.
call function 'SCWB_NOTE_DISPLAY'
changing
cs_note = gs_note.
endif.
endif. -
Input source settings not retained after log out/restart
Hi,
This was happening in Mavericks as well, and I have just upgraded to 10.10.1 hoping it would solve the issue.
I frequently need two input sources (US and Czech QWERTY Keybaords) for my workflow. But everytime I logout or restart, the computer resets the input source to Czech (not QWERTY). I have never selected this keyboard, but it always resets to this default.
Is there a plsit file or something I can delete? I bought the computer used from a friend in the Czech Republic, but I am Aermican and would prefer default system languages and keyboards to be US English. I do, however, need the region settings set to Czech Republic as that's where I work. So, calendar, numbers, currency etc. should be Czech, but all other system language US English.
Thanks for any help.Its OK
Updating the driver worked, seems it wasnt binding the NVIDIA Config to the xserver -
Built in microphone not working. Can't select the 'Input Source'.
I can't get the built in mic on my laptop to work, i tried any suggestion i could find on internet but i'm still stuck. I haven't used it before with windows or any other distribution so i can't tel if it's a new/old problem. I think the problem is that i don't have an option to select the 'Input Source' e.g. Mic or Front Mic as i saw in other's amixer controls/contents outputs.
Mine looks like this:
amixer controls
[root@myhost ~]# amixer controls
numid=2,iface=MIXER,name='Master Playback Switch'
numid=1,iface=MIXER,name='Master Playback Volume'
numid=18,iface=MIXER,name='PCM Playback Volume'
numid=4,iface=MIXER,name='Mic Playback Switch'
numid=3,iface=MIXER,name='Mic Playback Volume'
numid=5,iface=MIXER,name='Capture Switch'
numid=6,iface=MIXER,name='Capture Switch',index=1
numid=7,iface=MIXER,name='Capture Volume'
numid=8,iface=MIXER,name='Capture Volume',index=1
numid=13,iface=MIXER,name='IEC958 Default PCM Playback Switch'
numid=9,iface=MIXER,name='IEC958 Playback Con Mask'
numid=10,iface=MIXER,name='IEC958 Playback Pro Mask'
numid=11,iface=MIXER,name='IEC958 Playback Default'
numid=12,iface=MIXER,name='IEC958 Playback Switch'
numid=15,iface=MIXER,name='Beep Playback Switch'
numid=14,iface=MIXER,name='Beep Playback Volume'
numid=17,iface=MIXER,name='Caller ID Switch'
numid=19,iface=MIXER,name='Digital Capture Volume'
numid=16,iface=MIXER,name='Off-hook Switch'
amixer scontrols
[root@myhost ~]# amixer scontrols
Simple mixer control 'Master',0
Simple mixer control 'PCM',0
Simple mixer control 'Mic',0
Simple mixer control 'IEC958',0
Simple mixer control 'IEC958 Default PCM',0
Simple mixer control 'Beep',0
Simple mixer control 'Capture',0
Simple mixer control 'Capture',1
Simple mixer control 'Caller ID',0
Simple mixer control 'Digital',0
Simple mixer control 'Off-hook',0
amixer contents
[root@myhost ~]# amixer contents
numid=2,iface=MIXER,name='Master Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=1,iface=MIXER,name='Master Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=64,step=0
: values=62,62
| dBscale-min=-64.00dB,step=1.00dB,mute=0
numid=18,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---RW-,values=2,min=0,max=255,step=0
: values=249,249
| dBscale-min=-51.00dB,step=0.20dB,mute=0
numid=4,iface=MIXER,name='Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=3,iface=MIXER,name='Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=30,30
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=5,iface=MIXER,name='Capture Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=6,iface=MIXER,name='Capture Switch',index=1
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=7,iface=MIXER,name='Capture Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=8,iface=MIXER,name='Capture Volume',index=1
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=13,iface=MIXER,name='IEC958 Default PCM Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=9,iface=MIXER,name='IEC958 Playback Con Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0xff AES2=0x00 AES3=0x00]
numid=10,iface=MIXER,name='IEC958 Playback Pro Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0x00 AES2=0x00 AES3=0x00]
numid=11,iface=MIXER,name='IEC958 Playback Default'
; type=IEC958,access=rw------,values=1
: values=[AES0=0x04 AES1=0x00 AES2=0x00 AES3=0x00]
numid=12,iface=MIXER,name='IEC958 Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=15,iface=MIXER,name='Beep Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=14,iface=MIXER,name='Beep Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=22,22
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=17,iface=MIXER,name='Caller ID Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=19,iface=MIXER,name='Digital Capture Volume'
; type=INTEGER,access=rw---RW-,values=2,min=0,max=120,step=0
: values=90,90
| dBscale-min=-30.00dB,step=0.50dB,mute=0
numid=16,iface=MIXER,name='Off-hook Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
asound.state
[root@myhost ~]# cat /var/lib/alsa/asound.state
state.Intel {
control.1 {
iface MIXER
name 'Master Playback Volume'
value.0 62
value.1 62
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -6400
dbmax 0
dbvalue.0 -200
dbvalue.1 -200
control.2 {
iface MIXER
name 'Master Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Mic Playback Volume'
value.0 30
value.1 30
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 1050
dbvalue.1 1050
control.4 {
iface MIXER
name 'Mic Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.6 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.7 {
iface MIXER
name 'Capture Volume'
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
control.8 {
iface MIXER
name 'Capture Volume'
index 1
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
control.9 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.10 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.11 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.12 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.13 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.14 {
iface MIXER
name 'Beep Playback Volume'
value.0 22
value.1 22
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -150
dbvalue.1 -150
control.15 {
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.16 {
iface MIXER
name 'Off-hook Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.17 {
iface MIXER
name 'Caller ID Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.18 {
iface MIXER
name 'PCM Playback Volume'
value.0 249
value.1 249
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -120
dbvalue.1 -120
control.19 {
iface MIXER
name 'Digital Capture Volume'
value.0 90
value.1 90
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 1500
dbvalue.1 1500
state.HDMI {
control.1 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.2 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.3 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.4 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
alsamixer
Everything else related to alsa seems to work fine. If anyone has any ideea of what i should do/read/check please help.
Last edited by theother (2011-04-12 09:37:32)Dreyfus2006, welcome to the forum.
I suggest going into Control Panel / Troubleshooting / Hardware and Sound / Recording Audio. You can run the troubleshooter to see if it finds the problem.
Also, have you uninstalled and reinstalled the microphone in Control Panel / Device Manger / Audio inputs and outputs? This may allow you to install the latest driver.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Recording voice not working (no input source selected)
I'm using Garageband 10.0.3 (and Mavericks 10.9.5) and until very recently I could record voice tracks without using a mic - it would record using the in-built mic. Now whenever I try to record my voice, I get the "No input source selected" error message, and it pops up regardless of what I choose in input/output settings in Preferences. I've also tried it with my iMic plugged in (which I use to record guitar), but I get the same error message and nothing records.
Any ideas? Do you now need to have a mic plugged in for Garageband to record voice?Is monitoring turned on? Then disable it or plug in a headset. Otherwise will GarageBand not record from the internal microphone to avoid feedback.
In the System Preferences > Audio pane select the internal microphone and adjust the recording level. I noticed that the recording level is set to zero by default, whenever I look there. -
Keyboard input source change not being saved.
Since upgrading to 10.9 my original French spec Mac Mini reverts to French Keyboard input source when I close down, even after resetting keyboard input source to British PC on the login screen when booting up. Is there a more permanent setting option stored elsewhere?
Hi Brendan,
Thanks for the link. I did go into system preferences and checked that British was the default setting. In fact it was the only setting. Have subsequently done a bit more research. Up to now I have been changing input source at the initial login screen from French to British. I have just typed my username and password in using a French keyboard layout without changing the input source from French. It gets me in and the default input source is showing as British, which it is picking up from the system preferences. So there must be a setting somewhere that is specific to the login screen.
Done some more searching online and it looks like it may be a bug!
https://discussions.apple.com/message/23769843#23769843
There seem to be a few workarounds https://discussions.apple.com/thread/5485931
However, I have not worked at this level on a Mac before having a background in Windows support, Only recently getting a Mac. The last comment looks like some kind of Unix stuff, which I know OSX is based on. Is there an idiots step by step guide anywhere to carry out the plist edit etc?
Maybe you are looking for
-
Hi all, I upgraded to iTunes 11 recently and have now purchased some additional content from the iTunes store. The files have been downloaded but do not show up in my library. A search yields some results but I cannot access the songs in my library n
-
Help needed for a Final Cut Express project Compression
Hi guys, This is my first post as I usually find answers to all my questions reading through the various thread. I just haven't found an answer to my last pb yet hence the new topic. Hope you guys can help. I have got this very simple slideshow that
-
Illustrator CC crash on start - Mac OSX 10.9.2
Message Bellow - Process: Adobe Illustrator [23652] Path: /Applications/Adobe Illustrator CC/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator Identifier: com.adobe.illustrator Version: 17.1.0 (17.0.0) Code Type:
-
Contact Person Replication Problem - Updating could not be completed
Dear Experts, I'm facing the problem when replicating contact person from CRM to R/3. It only happen when changing the bp/contact person that paired (with contact person relation type) to more than 5 customer/bp and it always error when replicating t
-
What is protected by a LabVIEW Semaphore?
I can't seem to find a lot of documentation on LabVIEW Sempahores. I was wondering whether there is any firm guarantee as to what is protected by a semaphore and what is not protected by a semaphore. The only example I could find seemed to indicate t