Thank All Of You For All Your Help!

I am learning so much by reading this board. There is so much information and all of you are so willing to share your knowledge, expertise and what you
have learned.
How in the world did you learn so much about the iPad, trial and error? So many tricks and nuances to make it function better and easier, I am totally amazed.

There are always good and bad on every message board, but I am seeing an awful lot of VERY GOOD, HELPFUL, INFORMATIVE posters here and I am very grateful.
I have been thinking about getting a tablet for a couple of years, did some research, kept hearing people compare various brands to the Apple iPad, "it is almost as good as..." "it is cheaper than..." "it has pretty much the same features as..." that convinced me to go for the gold standard of tablets and I am very glad that I did.

Similar Messages

How can I enlarge the "all-day" screen on the iPhone calendar? I use the all-day screen for all my tasks, and it only shows 2 items at a time!! Help!!!

How can I enlarge the "all-day" screen on the iPhone calendar? I use the all-day screen for all my tasks, and it only shows 2 items at a time!! Help!!!

The iPhoto App can select all of the photos in the All Imported folder and delete them.

I synced about 50 books to my new ipad air 2. When I click any other books, the sync starts all over again for all books (it shows 51 books syncing). If I abort the sync, all of a sudden, all books are gone from my ipad. I don't know why.

I synced about 50 books to my new ipad air 2. When I click any other books, the sync starts all over again for all books (it shows 51 books syncing). If I abort the sync, all of a sudden, all books are gone from my ipad. I don't know why. I did not have this problem on my old ipad...or before I upgraded to the latest version of iTunes. Any help would be greatly appreciated.

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

My form has a list of yes or no questions. I want to use either cheboxes or radio buttons. I can't make it work. When I check yes for one question, it marks all yes answers for all other questions. If I mark some radio buttons to answer, it unmarks la

My form has a list of yes or no questions. I want to use either cheboxes or radio buttons. Unfortunatly I can't make it work. When I check yes for one question, it marks all yes answers for all other questions. If I mark some radio buttons to answer, it unmarks later. Need immediate help!!!

Is it that you are using a PDF-based form? Did you copy and paste the Yes/No fields all the way down your form? If so, then all of the yes/no boxes are copies of each other and have the same name and properties in the PDF.
For example, if you had:
     Question 1 and Question 1 Yes/No checkboxes
     Question 2 and Question 1 Yes/No checkboxes
     Question 3 and Question 1 Yes/No checkboxes
     Question 4 and Question 1 Yes/No checkboxes
Then whatever answer you selected in Question 1 would populate down through the rest of the form.
Changing the Yes/No field properties in questions two through four would eliminate the problem.
I hope that helps,
Brian

Adding a domain user to the admin role within the local user management breaks all metro apps for all users!!

Hi,
I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines.
First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
Here are my exact steps of what I did to reproduce our problem:
Complete format of HDD in preperation for a clean install
Clean install performed
Set up the machine initially with a local account
Test metro apps - all working fine
Open control panel from the desktop, click on System, change the system to join the domain, click reboot
Log into the system using my domain account
Test metro apps - all working fine
Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
I click add and then add my domain account - also giving it administrator access
Sign off or reboot to ensure the new security is applied
Sign back in to the domain account
Test metro - ALL BROKEN
Sign out
Sign in as local account
Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
could fathom was a full re install and not giving the domain user admin access to the local machine.
Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
Thanks

Hi Juke,
Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
in event viewer.
Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
Under "Applications And Services Logs" --> "Microsoft" --> "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
Windows.Launch contract failed with error: The app didn't start."
If you require any further information just let me know and I will provide as much as I can.
Thanks

ITunes reset all the plays for all my purchased songs!

I jsut looked at my iTuens library today and realized that it reset all the data for all the purchased sogns from the iTunes Store since the beginning of time! All my plays, everything - it has all been reset to zero, as well as if I changed the album name or title...it has all been changed back!
Why in the world has this happened and how do I get it back?! I can hardly stand the though of losing all this data forever!!

copy your entire iTunes folder to your new computer
copy your iPhoto library or other pictures folder to your new computer
copy your contacts to your new computer
You can use an external drive or thumbdrive for the transfer.

Ecc6, after i've changed all the passwords for all oracle users, then how

ECC6, after i've changed all the passwords for all oracle users, now sap can't connect to oracle , then, How can i config the sap to make sure it can boot normal?
If our database is sqlserver, i've changed the database password for all database users, then, How can i config the sap?
Thanks!

My db is oracle , the oracle host name is dbserver.
The sap ap server only install the SAP. SAP host name is apserver.
Just now i've altered all the password of the oracle database db user account, Include the account "sys".
(I must alter the password.)
Now the SAP service in the host "apserver" can't boot.
Could you teach me how can i config the "apserver" to make the SAP normal boot ?
Thanks!
Best regards!

I HAVE AN IPOD TOUCH MC008LL / The screen is blank you can get your help to find out what happens

I HAVE AN IPOD TOUCH MC008LL/ The screen (Display) is blank you can get your help to find out what happens please

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Received: "Thank You for scheduling your payment" from Verizon which I did not do

Anyone else receive the following email? Is this some sort of scam? I do not have automated payments even set up!
Thank you for your scheduled payment
Dear verizon.com customer, Thank you for using verizon.com to make your scheduled direct debit payment. Please keep a copy of the confirmation below for your records.
Scheduled Payment Confirmation
Payment Date:
5/29/2012
Payment Amount:
1379.00
Confirmation Number:
627464797
It's always a good idea to schedule your payment at least 3-4 business days prior to your bill due date to allow time for processing and avoid late payment charges If you find that you like the convenience of direct debit billing, why not sign up for automatic bill payment with Verizon every month? It's fast, free, and you'll never have to worry about missing a payment again.
Thank you for allowing us to serve you. Sincerely,
Verizon

DEFINITELY a phishing scam. The link points to: http://ftp.robertkupisz.com/wMRpwq8p/index.html
THIS IS NOT A VERIZON EMAIL! They are trying to scare you into clicking the link by putting that huge payment amount in.

Display the all text entered for all folder at Item and Header level of PO

Hi everybody,
I have the task like the following :
In a PO there are text folders available at Header and Item level. I want POs with type Purchasing document type u2018ZFu2019 ( First Article PO ) should display all the texts entered into any of these folders either at Header level or Item level during print preview and PO output like Purchasing document type u2018NBu2019 ( Standard PO ).
u2022 The technical information relating above subject ( SAPScript ):
o The layout set ( form ): ZPCC_PURCHOR_STD
o Print program : SAPLMEDRUCK
u2022 The problems like the following :
o I found out the differences in debugging of 2 types of Purchasing document type u2018ZFu2019 and u2018NBu2019 .
o Only Purchasing document type u2018NBu2019 the print program processes Text Elements (HEADER_TEXT, ITEM_TEXT, SUPPL_TEXT) to display all the texts entered into any of these folders either at Header level or Item level.
o To control the displaying of Text Elements as I know I need a print program, however, our print program is standard print program of SAP system in this case. So I can not make any changes there.
Do we have the configuration place to this one.
Please help me to fix the problem. Thank you in advance !

Hi
I advise to use the subroutine pool as your sapscript is the bespoke one ( Z one) . So you can make use of the below pseudo code.
In the sapscript the point where you want to display the text include the following code (
Assume that your are print header text Then first find out the Co-ordinates for it .Go to me23n->Text tab-> In change mode -> double click on text editor-> which takes you to sapscript layout->Under Go to -> Click on header & get the following details.
Text name : ekko-ebeln
Language : ekk-spras
TEXT ID : F01
TEXT OBJECT : EKKO.
/: DEFINE &V_ID& = 'F01'
/: DEFINE &V_OBJECT& = 'EKKO'.
/: DEFINE &V_LINE1&
/: DEFINE &V_LINE2&
/: DEFINE &V_LINE&
/: PERFORM GET_HEDER TEXT in program Z_PURCHASE_TEXT
/: USING &EKKO-EBELN&
/: USING &EKKP-SPRAS&
/: USING &V_ID&
/: USING &V_OBJECT&
/: CHANGING &V_LINE1&
/: CHANGING &V_LINE2&
/: CHANGING &V_LINE3&
/: ENDPERFORM
&V_LINE1&
&V_LINE2&
&V_LINE3&
Now in the Subroutine pool Z_PURCHASE_TEXT
FORM GET_HEADER_TEXT USING IT_INPUT STRUCTURE ITCSY
CHANGING IT_OUTPUT STRUCTURE ITCSY.
LOOP AT IT_INPUT.
CASE IT_INPUT-NAME.
WHEN 'EKKO-EBELN'.
V_TEXTNM = IT_INPUT-VALUE.
WHEN 'EKKO-SPRAS'.
V_LANG = IT_INPUT-VALUE.
WHEN 'V_ID'
V_ID = IT_INPUT-VALUE.
WHEN 'V_OBJECT'.
V_OBJECT = IT_INPUT-VALUE.
ENDLOOP.
USE FUNCTION MODULE READ_TEXT BY USING ABOVE PARAMETERS AND READ THE TEXT AND FILL THE VALUE IN FIELDS IT_OUTPUT.AS BELOW.
BEFORE THAT FILL V_LINE1,2,3 AFTER GETTING A TEXT FROM READ_TEXT FUNCTION MODULE.
LOOP AT IT_OUTPUT.
CASE IT_OUTPUT-NAME.
WHEN 'V_LINE1'.
IT_OUTPUT-VALUE = V_LINE1.
WHEN 'V_LINE2'.
IT_OUTPUT-VALUE = V_LINE2.
WHEN 'V_LINE3'
IT_OUTPUT-VALUE = V_LINE2.
ENDLOOP.
ENDFORM.
Declare the valriable in the routine v_textnm,v_lang,.....
I hope this hint help you to resolve your issue. Note : the spelling of commands which i have wrote may be incorrect.
Cheers
Joginder

Database roles seems like its not working for me - your help is appreciated

Hi,
I am using database 10g express edition.
I am using sql developer to connect to database.
I have 2 database connections,
one is called TCF and has a user called oracle.
two is called TCF_TEST and has a user called smith.
oracle user has privileges to do anything.
smith user has privileges to only connect, and something called resources.
I logged in to the database using oracle and gave the following command:
CREATE ROLE TCF_R;
GRANT SELECT ON EMP_IOD TO TCF_R;
GRANT TCF_R TO SMITH;Then I logged in as smith and was able to create a table.
first of all, the user does not have any privileges to create a table.
Second, when creating a table, smith can insert, update, delete records which also smith does not have any privileges to do.
so basically this whole thing is not working the way I want.
what am I doing wrong and what do I do to fix it ??
Thanks,
if you need more info, please let me know so I can provide it.

hey 009,
thanks for your help,
ok this is what I did step by step:
first , I created a user and granted create session to that user as below
CREATE USER SMITH IDENTIFIED BY SMITH;
GRANT CREATE SESSION TO SMITH;Then I logged in and gave SMITH privilege to create tables. (the reason for this is only for testing, I create a table and then I want to check if SMITH can drop it later on).
Then I created one table.
then Revoked the create table privilege from SMITH, log out, log back in and tested to make sure SMITH cannot create tables.
up to here everything is successfull.
Now since SMITH only has the following privileges which is only create session:
Privilege     Admin Option     From Role
CREATE SESSION          -
          1 - 1
it should not drop, insert , or update any table, or even select because I did not give it any grants.
but its doing all of the above.

All calendar entries for all accounts just duplicated today, how do I remove?

Today, 10/9/14, when I opened Thunderbird I had to re-enter the gmail account passwords (I have multiple gmail accounts in Thunderbird and Lightening). After doing so, all the (1000's of) calendar events for all accounts are now duplicated. Am using the latest Lightening 3.3.1, Thunderbird 31.1.2. If I go to Google Calendar directly, there is no duplication so the problem (seems to be) that Lightening is reading in the events twice. Must be a simple edit to some profile file but which one and how to edit?

Hmm - I don't use Mail (I use Outlook - and that's where my iCloud mail goes, too, never to Mail as I've never set it up in Mail).
If you've deleted the iCloud account in Mail, you may want to check your iCloud System Preferences and make sure that you have "Mail" unchecked.
But I don't know really... just another reason I don't use Mail, I guess.
I DO know that I have a very personal account still active in Mail - but I only use it on Outlook 2013 for Windows, so I never get any alerts, etc. I don't know why you'd be getting any sort of error messages from Mail - unless it has something to do with iCloud preferences...
Clinton

Export all maps (mappings for all dimensions in EXCEL)

Hi,
it shouldn't be an unknown issue - but unfortunately I can't find the way :-(

Below is updated code with the following changes :
- Adjusted SaveAs logic to prevent Excel prompts in the event the file already exists, etc. (i.e. DisplayAlerts TRUE / FALSE)
- Added Range creation logic for each worksheet page. If I really wanted perfect code, could do this better, but it gets the job done.
Sub ExportAllCurrDimMapsForLocationtoXLS()
'UpStream WebLink DM Custom Script:
'Created By:         cbeyer
'Date Created:      11-23-11
'Purpose:               Export all dimension maps to an Excel workbook
'Declare Constant
'NOTE : This will control whether the function gets the current map in the system or whether it looks back for a specific Period
'       FDM stores the Map for each period that was loaded... You may want to export a particular POV Period for audit purposes, etc.
'       IF you enable this, be sure to set the POV Period before running.....
Const boolgetPOVPeriodMap = False
'Declare working variables
Dim intPartitionKey
Dim strOutputMessage
Dim strSQL
Dim strCategoryFreq
Dim objPeriodKey
Dim strOutputFileName
Dim strOutputFilePath
'Get the location (PartitionKey
intPartitionKey = RES.PlngLocKey
'Create SQL Query to get Current Map Data
If boolgetPOVPeriodMap = False Then
     strSQL = "SELECT * FROM tDataMap where PartitionKey = " & intPartitionKey & " order by DimName ASC"
Else
     strCategoryFreq = API.POVMgr.fCategoryFreq(API.POVMgr.PPOVCategory)
     Set objPeriodKey = API.POVMgr.fPeriodKey(API.POVMgr.PPOVPeriod, 0, strCategoryFreq)
     strSQL = "SELECT * from vDataMap where PartitionKey = " & intPartitionKey & " and PeriodKey = '" & objPeriodKey.dteDateKey & " 12:00:00 AM' order by DimName Asc"
End If
'Create Recordset for all Exported Entities
Set rsMap = DW.DataAccess.farsKeySet(strSQL)
If rsMap.EOF And rsMap.BOF Then
     'No records
     If boolgetPOVPeriodMap = False Then
          strOutputMessage = "No Mapping data was found For " & API.POVMgr.PPOVLocation & ". If this location Is using Parent Maps, you can only export mapping data at the parent location."
     Else
          strOutputMessage = "No Mapping data was found For " & API.POVMgr.PPOVLocation & " for period " & API.POVMgr.PPOVPeriod & ". If this location Is using Parent Maps, you can only export mapping data at the parent location."
     End If
Else
     'Records Exist, process
     'Generate file name / path
     If boolgetPOVPeriodMap = False Then
          strOutputFileName = API.POVMgr.PPOVLocation & "_DimensionMaps.xls"
     Else
          strOutputFileName = API.POVMgr.PPOVLocation & "_" & objPeriodKey.strDateKey & "_DimensionMaps.xls"
     End If
     strOutputFilePath = DW.Connection.PstrDirOutbox & "\ExcelFiles\"
     'Create Excel file reference
     'Declare Excel working variables
     Dim oExcel
     Dim oBook
     Dim oSheet 'No puns here......
     Dim oRange
     Dim intCurrentSheetOrdinal
     Dim intCurrentRowOrdinal
     Dim intCurrentColOrdinal
     'Intialize Excel
     Set oExcel = CreateObject("Excel.Application")
     Set oBook = oExcel.Workbooks.Add
     'Declare working variables
     Dim strCurrDimName
     'Initialize variables
     strCurrDimName = ""
     intCurrentSheetOrdinal = 1
     intCurrentRowOrdinal = 1
     intCurrentColOrdinal = 1
     With rsMap
          Do Until .eof
               'Check to see if current DimName matches existing DimName. If not, add headers
               If rsMap.fields("DimName") <> strCurrDimName Then
                     'If the dimension name has changed to a different dimension name, show total information before starting headers
                     'If the previous dimension was not "", then we are transitioning from one range to the next. Lets create a named range on the just
                     'finished worksheet because we can or because you may want to use this for re-uploading
                     'NOTE : The range I'm creating is more for reference as to how to implement this and I don't know if I'm making the range in a fashion that
                     'FDM will pickup for importing.
                     'NOTE : You probably want intCurrentRowOrdinal - 1 since it is 1 row past the last row of data at this point. If you want to clean it up,
                     'then you need to make sure RowOrdinal is not going to be less than the starting point and I didn't feel like adding the couple rows of
                     'code to do the work properly as FDM will just ignore the blank row in all likelihood.
                                                                  If strCurrDimName <> "" Then
                            Set oRange = oSheet.Range("A6:K" & intCurrentRowOrdinal)
                            oBook.Names.Add "ups"&strCurrDimName, oRange
                     End If
                     'Create worksheet reference
                       Set oSheet = oBook.Worksheets(intCurrentSheetOrdinal)
                      'Create default header at top of each new dimension group
                         If boolgetPOVPeriodMap = False Then
                              oSheet.range("A1") = (API.POVMgr.PPOVLocation & " - Map Conversion")
                         Else
                              oSheet.range("A1") = (API.POVMgr.PPOVLocation & " - Map Conversion for " & rsMap.fields("PeriodKey"))
                         End If
                         oSheet.range("A3") = "Partition: " & API.POVMgr.PPOVLocation
                         oSheet.range("A4") = "User ID: " & DW.Connection.PstrUserID
                         'NOTE: I could make an array of the field names and do a loop here; however, this is easier to read.....
                         '      probably not how I would do it from an efficiency standpoint, but since it's a limited number of fields
                         '      this will work.....
                             oSheet.range("A5") = "PartitionKey"
                             oSheet.range("B5") = "DimName"
                             oSheet.range("C5") = "Source FM Account"
                             oSheet.range("D5") = "Description"
                             oSheet.range("E5") = "Target FM Account"
                             oSheet.range("F5") = "WhereClauseType"
                             oSheet.range("G5") = "WhereClauseValue"
                             oSheet.range("H5") = "-"
                             oSheet.range("I5") = "Sequence"
                             oSheet.range("J5") = "DataKey"
                             oSheet.range("K5") = "VBScript"
                         'Update variables
                            strCurrDimName = rsMap.fields("DimName")
                            intCurrentRowOrdinal = 6
                            intCurrentSheetOrdinal = intCurrentSheetOrdinal + 1
                            'Update worksheet name
                            oSheet.name = strCurrDimName
               End If
                 'Write Details
                        oSheet.range("A" & intCurrentRowOrdinal) = intPartitionKey
                 oSheet.range("B" & intCurrentRowOrdinal) = rsMap.fields("DimName").Value
                 oSheet.range("C" & intCurrentRowOrdinal) = rsMap.fields("SrcKey").Value
                 oSheet.range("D" & intCurrentRowOrdinal) = rsMap.fields("SrcDesc").Value
                 oSheet.range("E" & intCurrentRowOrdinal) = rsMap.fields("TargKey").Value
                 oSheet.range("F" & intCurrentRowOrdinal) = rsMap.fields("WhereClauseType").Value
                 oSheet.range("G" & intCurrentRowOrdinal) = rsMap.fields("WhereClauseValue").Value
                 oSheet.range("H" & intCurrentRowOrdinal) = rsMap.fields("ChangeSign").Value
                 oSheet.range("I" & intCurrentRowOrdinal) = rsMap.fields("Sequence").Value
                 oSheet.range("J" & intCurrentRowOrdinal) = rsMap.fields("DataKey").Value
                 oSheet.range("K" & intCurrentRowOrdinal) = rsMap.fields("VBScript").Value
               'Increment Counters
               intCurrentRowOrdinal = intCurrentRowOrdinal + 1
               'Move to the next record
               .movenext
          Loop
     End With
     'Final Sheet Named Range addition
     'Since the loop will end and we will not execute the above logic to create the range for the previous sheet
     'the easiest (laziest) solution is to just handle the last sheet after the loop.
     'We're basically doing the same stuff we did above, just down here.
      If strCurrDimName <> "" Then
          Set oRange = oSheet.Range("A6:K" & intCurrentRowOrdinal)
           oBook.Names.Add "ups"&strCurrDimName, oRange
      End If
     'Close / release file objects
     'Added some logic here to ensure you don't get caught up on the file replace prompt.
     oExcel.Application.DisplayAlerts = False
     oBook.SaveAs strOutputFilePath & strOutputFileName
     oExcel.Application.DisplayAlerts = True
     oExcel.Quit
     'Create output message
     strOutputMessage = "Mapping data export for " & API.POVMgr.PPOVLocation & " complete. Extract file is : " & strOutputFilePath & strOutputFileName
End If
'Close / release data objects
rsMap.close
'Display output
If LCase(API.DataWindow.Connection.PstrClientType) = "workbench" Then
          MsgBox strOutputMessage
Else
     'Let the user know we are done
     RES.PlngActionType = 2
     RES.PstrActionValue = strOutputMessage
End If
End SubEdited by: beyerch2 on Dec 14, 2011 9:43 AM

To all of you I want to Thank-you for all your help your great

THANK-YOU I just want to say it's nice to have the help with a great bunch of great people I like it when you get honest opinion and you get help that works also you have used the stuff and you know what works and what does not

It is always encouraging to read that someone is pleased with the Forum. Thank you, too.

Thank you for all your good work!

I just checked the statistics of the lens profiles downloadable from the Adobe Lens Profile Downloader. There are a total of 411 user submitted profiles. Here are the break downs of the total:
Canon 158
FujiFilm 7
Nikon 132
Pentax 11
Panasonic 2
Ricoh 1
Sigma 4
Sony 96
Keep up the good work. We like to thank all who contributed to the efforts!
-Simon

there was a system settings that didn't allow the separate window report executing

Thank All Of You For All Your Help!

Similar Messages

Maybe you are looking for