Thank you All, I wish you the best.

Just wanted to say thank you to all the good folks in this forum that have helped me and I wish you all the very best. It has been my pleasure to participate and exchange ideas, wish it could go on, but I don't believe it will. I am at a point in my life where freedom of expression is too precious for me to give up, I have always strived to be fair, concise and above all behave like a gentleman. I never written anything that I was ashamed of, did my best to be civil and never offend while expressing my opinion.
Unfortunately I do not conform to the guidelines, so again my friends best wishes to all, maybe one day we will have the phone that works and a company that cares about their customers.
Take care.

yes, this was the problem, thank you very much, I now can show the presentation to my client.

Similar Messages

  • I finally got my iphone fixed! Just wanted to say thanks to Austin! Not sure if you can see this but thanks a whole bunch! I wish you the best of luck in hopefully going to UT and in running your business!!!!-Tristian!

    I finally got my iphone fixed! Just wanted to say thanks to Austin! Not sure if you can see this but thanks a whole bunch! I wish you the best of luck in hopefully going to UT and in running your business!!!!-Tristian!

    Austin who?

  • HT5570 I have forgoten the security questions,i have tryed ewerithing to reset all of the instructions i have recived from the apple support team. I still can not reset the questions. Can some body please help me to reset them. Thank you and best regards

    I have forgoten the security questions,i have tryed ewerithing to reset all of the instructions i have recived from the apple support team. I still can not reset the questions. Can some body please help me to reset them. Thank you and best regards

    Since this is a user-to-user support forum, there isn't much we can do other than refer you to the following instructions and as noted in the instructions, then to Apple Support if you can't reset as shown in the instructions: If you forgot the answers to your Apple ID security questions

  • What format gives you the best resolution for Home videos to be put on IPAD 2

    I am a new user to the IPAD
    I want to move some of my Home videos on to the I pad. 
    What is the best format? 
    I have sync the same videos to I phone 4 they look great but on the Ipad they are grainy

    Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
    If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
    Frame Size: 1280x720
    Aspect Ratio: HDTV 720p
    Pixel Aspect Ratio: Square
    Editing Timebase: 29.97
    Compressor: Motion JPEG A
    Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
    Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

  • HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

    I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
    "The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

    Try Perian.
    http://perian.org/

  • Thank You: The Final Decision

    I wanted to thank those of you who patiently answered my questions regarding the selection of an external monitor exclusively for photo image editing.
    After pouring over numerous reviews & sorting through the myriad of forum threads, I have narrowed the field to 2 contenders: the NEC EA231WMi & the Dell U2410. Neither of these monitors are perfect & both have their strengths & weaknesses.
    And regardless of my final selection, I will get an Eye-One Display 2 colorimeter.
    As a final call for input, if anyone has any strong opinions regarding either of the above monitors, please let me know.
    Again, thank you for your thoughts & suggestions.

    it would cost $20 a month more than you pay now for a device that will handle email and web 1000x better than your phone now...
    Thats $240 more dollars a year for the ease and convince..
    You should think more about how the data package will help you than how its just a random fee you get nothing for
    I use my phone every single day of my life for emails, even if its just being lazy in bed, waiting at the doctors office, to view some foodnetwork while i'm shopping, watching youtube while my gf is trying cloths, checking stock prices while waiting for the daily meeting to start..... etc etc

  • Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    Buying more hard drive space is a very valid option, here.  Editing takes up lots of room, you should never discount the idea of adding more when you need it.
    Another possibility is exporting to MXF OP1a using the AVC-I codec.  It's not lossless, but it is Master quality.  Plus the file size is a LOT smaller, so it may suit your needs.

  • My old computer is dying and I want to transfer my account to my new computer.  I will not be using the old computer at all.  What is the best way do do this?

    I want to stop using my old computer completely and transfer my itunes account to my new computer.  What is the best way to do this?

    A simple search

  • What settings would get you the best sound quality?

    Okay, so I don't really know too much about audio, but I do care abou tsound quality.
    I was poking around in the built in MIDI controller and I was looking at the settings for my MacBook Pro Retina 15" and the options under format where "44100Hz, 48000Hz, 88200Hz, and 96000Hz." I am wandering which of these would be the highest quality sound? I am not sure and don't want to mess anytihing up by setting it wrong.
    Also, the other option in the channels. Which is better: 2ch-24 bit integer, 2ch-16 bit integer, or 2ch-32 bit float?
    I'm not sure if these are dumb questions, but thanks in advanced!

    Have a look at this article, you'll get an extensive comparison of the AAC and MP3 formats and bit rates benchmarked against CD format: Planet of Sound - Quality of AAC audio and MP3
    Of the various options iTunes gives, AAC and MP3 are compressed formats so you lose some quality but gain space. AIFF (CD) and WAV are uncompressed so you gain quality at the expense of space. Apple Lossless falls somewhere in between, doesn't compress as much as AAC and MP3 so you gain some space but not as much, however it is claimed to give a quality which is the equal to CD. Of the compressed formats AAC is less widely used at present, if you have a non Apple music player or a newer in-car CD player then MP3 would be the most compatible compressed format: iTunes Encoding Strategies

  • Thank you the latest update fixed Radio Tuning

    All fixed.. working perfect.... not sure what update the one for LION or the one for ITUNES .. but Radio Tuneing is back and wonderful
    many thanks..
    med dement

    I'm not sure that's what fixed it.  Posts reporting radio issues were dropping off before the updates were released.  Also people who were neither running Lion nor iTunes 10.5 reported problems and many people who ran both also did not report problems.

  • I forgot my security questions and I aren't receiving the reset email to my email. I already check in the inbox and in the spam, anyone can give me some advise?thank you.

    I forgot my security questions and I aren't receiving the reset email to my email. I already check in the inbox and in the spam, anyone can give me some advise?thank you.

    The best way is to call applecare (800) APL-CARE (800-275-2273). You can also email them but you need to create a case here https://getsupport.apple.com/Issues.action. When I did it it took about 10 mins.

  • Now I can start my Mac Pro only in "secure mode." I'm still appears on all monitors a series of bands such as seen in the attached file. Someone can give me a diagnosis? Thank you.

    Now I can start my Mac Pro only in "secure mode."
    I'm still appears on all monitors a series of bands such as seen in the attached file.
    Someone can give me a diagnosis?
    Thank you.

    The attached file is not showing.
    In Safe/Secure Mode many Drivers are not loaded. When your computer works in Safe Mode, but not regular mode, two types of problems are implicated:
    1) Third-party kernel extensions. a conflict with some part of Mac OS X means that when those extensions load, your Mac can not run.
    2) Failed graphics card. Since the Driver for the display is not loaded, the display in Safe Mode uses a very simple built-in Driver. In regular mode, once the driver is loaded, all parts of the graphics card must be working, or you could get bands of color on the display (which is just what you reported).
    Which Model Mac Pro Tower or MacBook Pro is this?

  • Hi We do want to build up a network with the help of one of e new apple server products. Before we do so, I was wondering, who d be able to tv us some good advise? Thank you!

    Hi,
    We were thinking of actually using apple's server products for establishing a worldwide IT network for a small and later on medium sized business to provide everybody a solid and sound environment.
    Hence, before we purchase, we wanted to make sure, whether some of you would be able to recommend us on how to move forward on the followings:
    - which of the servers and which processor would be the best choice and are the most reliable ones
    - would a "normal" Mac pro be sufficient enough for future tasks?
    - a normal server, can also be used as a normal workstation.
    - where can we get the right support in case needed? We had some difficulties in the pt in actually getting hold of the apple support centers.
    - all our products with the exception of a few are apple products
    Appreciate your feedback.
    Thank you and best regards
    Frank

    - which of the servers and which processor would be the best choice and are the most reliable ones
    'most reliable'? I haven't found any reliablity issues or differences between any of the MacPro models - 4-core, 8-core, 12-core all just run and run and run. As for 'best choice' that depends on what you want to do with it, budget, workload, etc., etc., etc.
    - would a "normal" Mac pro be sufficient enough for future tasks?
    How long is a piece of string?
    Seriously. I mean, who can know what 'future tasks' you expect to throw at the machine, and whether one machine or 50 is sufficient for the task. There are even tremendous differences in capacity (e.g. RAM, CPU power, etc.) between 'normal' MacPro models, therefore it's impossible to answer your question since we don't know what 'normal' is, nor do we know what 'future tasks' are.
    - where can we get the right support in case needed? We had some difficulties in the pt in actually getting hold of the apple support centers.
    If you're running business-critical services check out Apple's Enterprise Support offerings, find a local Mac dealership who's willing to help, or hire someone who knows what they're doing.

  • I have brought a iphone 4 and the person i brought it from has not deleted her icloud account i need her pasword to delete it but hse wont give it to me what can i do how can i add my icloud account can you give me a reasonable answer please. thank you

    i have brought a iphone 4 and the person i brought it from has not deleted her icloud account i need her pasword to delete it but hse wont give it to me what can i do how can i add my icloud account can you give me a reasonable answer please. thank you.

    The seller needs to follow this procedure:
    http://support.apple.com/kb/TS4515
    If she refuses, then as Tim suggested the iPhone is probably stolen. You'll need to contact your local police department and ask how to proceed.
    Regards.

  • How can I turn off other languages on my ipad running ios7?  It has Japanese or Chinese and the international keyboard is set to English.  Thank you.

    How can I turn off other languages on my ipad the next generation running ios7?  I have the international language set to English but it's showing a foreign language and sometimes it shows the foreign language with English.  Thank you.

    The complete backup and restore procedure is explained in the link above.
    If you don't want to do a restore, then your iPad may remain in the unstable state you have for the moment.
    You can change the country in the App Store. Have a look at the bottom of the App Store screen, you can change the country and also do the permanent change via Manage > Account.
    You can change the language in iTunes via General Preferences > under General tab.

Maybe you are looking for

  • Flash (is it for me?), Wacom Cintiq 22HD, and Mac Mini

    I have Flash as part of the CS6 Master Suite, which I purchased primarily for InDesign, Photoshop and Premiere, but as yet I haven't opened Flash. I'm hoping someone here can save me time by advising me whether Flash is suitable for my purposes. I'm

  • Yahoo IM no longer working in Apple Messages.

    My Yahoo IM is no longer working in Apple Messages. I am able to log in and send messages to my buddies, and they receive my messages. The problem is I do not receive any of their replies. I have AOL, Jabber and iMessages working, its only Yahoo that

  • Mixed Signal Graph: Cursor Position Property for Multi-Plot Cursor

    I'm working 6 waveforms on 3 different plot areas in a mixed signal graph in LV2009.  When I try to pull the Cursor.PosY property from my cursor (in which Watch All Plots is True, and is set to Multi-Plot in the graph properties), it returns the valu

  • Merging Spool No's

    Hi Friends, I created one new output type . In that i entered 3 different sap script program name and script name's . In va03 after entering invoice No and click on print button now it is creating 3 different spool No's . My requirement is in one spo

  • +x and -x frames results in BEEP errror

    I am working in 5.1.2 and have been experiencing an odd problem. I am editing a feature film (35 mm source) and the total time is: 01:49:39:01 (drop frame). When I select the double arrows (Select All Tracks Forward) and then do a simple + 10 or - 10