Thank you David ... for links to previous firmware versions

Thank you david for posting the links to previous firmware versions. I posted a thread about the WRT54G (V8) and Easylink Advisor not recognizing this router after firmware upgrade. The timing of your post is excellent.
Just for some more info for WRT54G V8 users. I had the Easylink Advisor working before firmware update. After firmware update it still recognized router but NOT to set up new security settings. Everything was working and dropped connectivity issues seemed to be resolved so I was happy enough. But I had a conflict I thought was related to the Easylink advisor intsall (it was). So, I uninstalled and reinstalled. Easylink would not recognize the router at all afterward.
I think that rolling back to previous version firmware, then going through set up of Easylink advisor should restore functionality to the app. (except for security changes) but I havent tried it yet.
I need the new firmware to keep from dropping internet connection. So, I am hoping that I will only lose access to security changes through Easylink advisor when re-flashing with the new firmware again. We'll see.
I assume Linksys will upgate the Easylink Advisor in the near future so that it will recognize the WRT54G V8 router with latest firmware 8.00.4?
Thanks again David and good luck, all.

Yes, that was good news for V:M users but when are Creative going to release new firmware for the Zen Nano Plus and the Muvo players so that it contains FM Recording again?Could the Mods try and find out, please??PBMessage Edited by PeeBee on 2-09-20060:48 AM

Similar Messages

Thank you all for the responses. By process of elimination, I think the problem is the connection to the express in between the extreme and dock. I bought another express and tried it at dock, no luck, I then replaced new express where the one is between

I have an airport extreme and express setup. My extreme is in my 2nd floor office with windows facing the water. My dock is about 250 ft away down a very steep hill. I have the express about 100 ft down the hill in an electrical waterproof box attached to a tree as high as I could install. The signal is weak and I'm thinking I might have to buy another express. Any thoughts on the best setup for me. I ultimately want to control speakers(hard wired in) down at the dock with my iphone. I have a receiver coming with airplay built in.
Thank you all for the responses. By process of elimination, I think the problem is the connection to the express in between the extreme and dock. I bought another express and tried it at dock, no luck, I then replaced new express where the one is between extreme and dock, no better. I unplugged the express between extreme and dock and there was no difference. So I believe I am connecting to the airport express or extreme that is inside the house. Again because when i approach express that is halfway I reconnect. so if you can understand my chaos, I believe the express in between is not really connecting to the extreme inside my house. Yes, No? So I need to know how to know if the express half way down the hill is getting the connection from the the extreme in the house. This is wearing me out!!!!!

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

Thank you guys for helping me out now I can now access my IPad. But there is one more challenge, the iPad is showing negative view so I can not see the true color of things

Thank you guys for helping me out now I can now access my IPad. But there is one more challenge, the iPad is showing negative view so I can not see the true color of things

Settings>General>Accessibilty and turn off white on black.
Matt

Thank you Creative for the new Firmw

From what I read on the boards, I think EVERYONE that owns a Micro should reply to this post in thanks for cranking out a Firmware that solves the hated Battery Drain problem. I work in an atmosphere where thanks is hardly given out (being a teen, that normally happens), so, thank you, because this deserves it.
Thank you.
Don't hurt me for having absolutely no substance other than that and wasting your time for posting this. I hope this doesn't violate any unofficial rules! If it does, sorry, but I felt this was needed.

yes, a very deserved tnx creative! so far all you have done is bring beatiful sound to my ears when i need it most
keep up the great work!!!

TS5376 I did all of the above because the update wouldn't install now I am unable to re install iTunes it gives me a thank you message for installing ITunes but nothing is there. Can you help

I am unable to reinstall ITunes after following all directions about the update program. I keep getting a thank you message as if it downloaded and nothing is there
Any suggestions ?

Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Thank you Adobe for Lightroom 4

Rarely do I take the time to comment on forums unless I have an issue, but I have to just say that Adobe made my day when I discovered the availability of Lightroom 4 (I've been a longtime user), purchased it, installed it (easily) and found to my delight the video support particularly for mts files. I had been unable to find a suitable cataloging program for mts files and was had to resort to Picasa. So thank you Adobe!

Indeed Lr4/PV2012 rocks! (for the vast majority of my photos).
It really is a pleasure to be able to edit tone without having to worry about stuff like:
- Be careful brightening or it'll get washed out.
- Be careful increasing contrast or highlights will lose detail.
- Be careful increasing fill-light or the colors will go wonky...
Make it as bright or as dim as you want, where you want - PV2012 has your back...
Rob

Thank you, Adobe for the enhanced actions editor (Was: Thank you, Adobe)

Just want to thank you for the Enhanced Actions Editor... fantastic!
Months ago, I had requested to have something similar that Flash Catalyst had, and you delivered.

Hi Eddie,
On behalf of the product team and Adobe, I thank you for sharing your feedback on the new feature. We are glad that you liked it and we are hoping that it will be as useful to our other users too.
Have a nice day!
Thanks,
Preran

Thank you Verizon for providing update for ATIV SE.

Very much appreciated.

lisakrambo wrote:
Thank You. I don't know what else to say, but thank you. Patience is a virtue, and we both had it. Or should i say, have it. Rule the Air. I appreciate the most excellent service I have received. It hasn't been perfect, but it has been successful. That means you are important to me, and I get a clue that you actually value me. I appreciate that. Thank you for the excellent service, and making me feel valued.
Be still my beating heart!

Thank You Adobe for Fixing Bridge

Wow, that was a very long. painful and frustrating wait to get a version of Bridge that works again. Bridge CS3 was the worst piece of Adobe software that I have used since 94 or 95, Bridge CS4 now actually works again, hooray! Thank you Adobe!
mark

>Don't be absurd, Omke. It's not a free fix for CS3 users. Bridge 2.x was horribly broken and it should have been fixed for free, period.
Well Ramón, I put a smiley in that post...
But serious, I also (as you have done before) have written many times that Bridge was a free application that came with PSCS. Personal I did not have that horrible experience with it that you had. Yes, there were troubles every now and then but I solved them with the cache, plist and refresh method I often described.
I do suspect that the fact that I work on an intel Mac has also something to do with that. However, my experience with Bridge 3 is very positive and a massive improvement compared to Bridge 2.
Yes it would be nice if there had been an update but they have chosen to put al their effort in a new Bridge with some very nice improvements added to the interface (pathbar and better visible menu's to mention a view) and a much better (but not the best) cache management.
Together with Leopard 10.5.5 and CS4 I fully agree with Ann. The improvement of Bridge is (although it comes again for free with PS... :-) ) alone reason enough to upgrade.
kind regards
Omke

Thank you message for user (ganeshmb)

Thank you so much!.....upon reading the log trace I found the bean was not being loaded due to the fact that struts-2.1.2..jar was copied in both Tomcat's main lib folder and also in the lib folder of my struts app....so when Tomcat tried to load something that has already been loaded and it threw an exception leading to the app not being load...Thanks once again:)

Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Need link to WRT16Nv2 Firmware version 11 please.

I recently purchased a WRT160Nv2 router with firmware version 11.
I had it configured to allow remote desktop connection to any of the 3 PCs.
PC1 3389 (External) to 3389 (Internal) on IP aaa.aaa.aaa.aaa
PC2 3390 (External) to 3389 (Internal) on IP bbb.bbb.bbb.bbb
PC3 3391 (External) to 3389 (Internal) on IP ccc.ccc.ccc.ccc
This worked fine.
However, I was having DNS issues that apparently were fixed in firmware version 15, so I upgraded.
And could no longer use the configuration above
As soon as I tried to enter the PC2 details (or PC3) it gave an error saying the port range was already in use.
I'm guessing that the firmware is not recognizing the different IP addresses and thinks the port 3389 is a duplicate.
After much searching, I found a link to firmware versio 8, which supposedly did not have the problems that version 11 has.
However, version 8 has the same issue as version 15 in not allowing the configuration I had.
Ande, after speaking to several online linksys chat people, and waiting patiently for a phone call from a tech, I do not have any link to firmware version 11.
So, if anyone happens to have a WRT160Nv2 with firmware version 11 still on it, and know some way to read the firmware out of it I would really appreciate it
Thanks.

Thanks for the link.
However, when I tried to register it told me my email address was banned (odd, since I've never been to that site).
Also, there is no contact information on the site for contacting the administrators so no way to get email unbanned in order to register to download the firmware.
I'm STILL waiting for the linksys tech to call, was supposed to be 48 hours from when I spoke to the tech online.
ldb.

Is every ios release overtakes the previous firmware version ?

Well I dont Know from where to start ....
I am using an Iphone 5 the problem is I am stuck in the recovery mode due to error 1 which is obviosly a hardware issue and most likely to be a baseband problem but here it is why am I asking this question because I was running ios 7.0.6 and suddenly the iphone became in ''Searching..." mode so tried the factory settings by erasing all data and settings but couldn't help so I went DFU mode and restored my iphone using 7.1 IPSW and Wizardry the iphone worked for just one day then the same problem ''Searching..'' .
So I went DFU mode again but this time I let itunes to update to the latest firmware version which is IOS 7.1.1 and then amazingly the phone worked for few hours but then again same problem '' Searching..." and BTW EVERY THING WORKING FINE EVEN WIFI EXCEPT THAT NO CALLS,TEXTS OR CELLULAR DATA AND THERE IS NO IMEI OR FIRMWARE.
So I went DFU for the third time but I got the error 1 alert message and Now I am stuck in Recovery mode.So .. Is that means that every IOS release over takes the previous firmware ... which means if I waited for the next IOS 7.1.2 or IOS 8 hopefully I will be able to get out from the recovery mode and run away from the error 1 alert monster ? ... and I know the problem searching might occur again but I think I might give up then for this handset then. But I want to try all the solutions and options I have in my hands since I got no AppleCare/Store in my Country

It is true that updates may potentially bring changes to some firmware as well as software, but not every thing changes in each update. If your hardware is failing compatibility with the current firmware, I would bet money that you are going to have issues with future versions as well. The iOS assumes that your hardware is in working order when it was designed and a failure in that hardware results in these errors and the inability to operate using the firmware. To assume that a different firmware (especially a future firmware update) will fix you issue is close to absurd, unless that firmware version made all iPhones (or even most) have hardware communication issues. Until that day, Apple is not going to alter the firmware. Also you stated that it worked then stopped multiple times and now you receive error 1, which during the update basically means the iPhone is not passing the hardware test, so even with a future update, the hardware is not going to pass the diagnostic test when installing firmware, therefore you will still need service.
Even if you have to send it off to a friend in the country of purchase, it's going to be better and faster than waiting on something that has a 1% chance of success.

Thank you Creative for returning FM recording to the Visio

I was moderately upset that I could no longer update my firmware because if I did, even if it would fix some issues, it would have removed my FM recording feature. I am glad that you all have re-introduced the feature back into the Zen Vision:M! I could not always listen in to my favorite radio shows and would set my Vision to record when necessary. Now I can again!?Plus?have all the fixes since last I updated my firmware. Thanks Creative!!

Yes, that was good news for V:M users but when are Creative going to release new firmware for the Zen Nano Plus and the Muvo players so that it contains FM Recording again?Could the Mods try and find out, please??PBMessage Edited by PeeBee on 2-09-20060:48 AM

This is my first post. I would like to thank you all for all of the information you have posted on this forum. It has been most helpful to a Newbee. I have a MBP17 w/trackpad and click bar from '08. I need a bigger HD, how big can I go? THX

This is my first post, but I have been following this forum for a while and you have all been very helpful in my MacEducation. I have a MBP17 10.6.8 w/6GB ram from '08. I need to upgrade my HD from 200GB. I would like to go as big as I can and would appreciate any experiance you've had. Could I go 750GB or 500 GB @ 7200 rpm. Should I upgrade to Lion before I swap the drive out? Thanks, Johnny

Hi Johnny,
Yes you can do the 750 or 500, 5400 or 7200. Just make sure it is 2.5" SATA and 12.5mm high or less (there is at least one HD out there that is 15mm high and will not work).
Lion: I don't know that it matters much either way, just don't do them at the same time. That way, if there are issues, you have a much better chance of troubleshooting one major change instead of two.

Thank you Adobe for being better than useless at solving my SD 16:9 PAR Problem

I have read everything on these forums about the new PAR for SD 16:9 which is now 1050 x 576. I have finally got a project for broadcast on SKY and guess what I can't even get a video cleared on Clearcast because it won't accept the new PAR, their server throws up an inccorect PAR error saying my video is 1:1.85 which is incorrect for their purposes. I explained the logic to various technical guys there and they understand but don't care, they want an anamorphic SD 16:9 video that scales to 1024 x 576. I've tried everything and have had to resort to either sending it to a post production facility and being charged not only for the rough cuts I send to Clearcast but also the final versions to Adcast for final approval for SKY or buying Sorenson Squeeze. Premiere is useless for both purposes because they are sticking to 1050 x 576 PAR for SD 16:9. Before you try to explain that this is correct, I already know, but that isn't helping solve my problem. This is SKY we are talking about, one of the major broadcasters and Premiere has failed to deliver. This is going to cost me £300 - 500 to sort out. I've used Premiere for must be getting on for 10 years, people have been complaining about this problem for ages and there are work arounds but none of them solve the final export PAR. If I buy Sorenson, I think I might go to FCP or Avid for the first time in 10 years of editing; I finally get a broadcast job and Premiere fails me, thanks a bunch Adobe, all you have to do is offer the ability to do this whether it is right or wrong and you can't deliver on it, just take a look at your forums and you will see that this is a recurring problem, why the hell haven't you sorted it out.
If I have to pay £500 plus for Sorenson just to encode SD video I'm damn sure I'm not going to upgrade to CC on principle, time to jump ship I think, Adobe have obviously reached that size that all companies reach where they no longer care about the small guy trying to do his job.

Before you try to explain that this is correct
I'm not sure it is correct. On the NTSC side, it's definitely not correct. Adobe switched to the PAR used by the BBC, but those values were designed for use with the 702 pixel Clean Aperture. That's fine with analog material, but it actually works out to be incorrect for digital signals using the full 720 raster. This is why we get very small black bars on the sides when downscaling HD to SD, even though the SAR is identical for both.
Rather than use the correct values, Adobe switched to the incorrect values used by much of the world.
Except SKY, it would seem. But that does mean you will have to follow the instructions provided by both Jeff and Mark in the original thread.
http://forums.adobe.com/message/6299233?tstart=0#6299233

Thank you David ... for links to previous firmware versions

Similar Messages

Maybe you are looking for