Thanks. A new problem when connecting isql*plus to database
Thanks for everyone helping me.
I can browse the isql*plus page now. However, When I connect isql*plus to the database, I got the error displayed in the isqlplus login browser screen:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Pls help.
Can you connect to it from command line SQL*Plus?
It sounds like the database is not running. You should start up the database and try again.
Alison
Similar Messages
-
Problem when connecting locally to Oracle Database 10g from Java code
Good afternoon,
I try to connect to my local Oracle 10g from JAVA code. Could somebody tells me what are the 'values' to enter in place of 'value1, value2, value3' in the following:
final String connectionURLThin = "jdbc:oracle:thin:@value1:value2:value3";
I tried to put my 'user' and 'pw' credentials I used when connecting with SQL*PLUS:
value1=my_user_name
value2=my_pw
value3=my_schema
but it doest work. Besides where could have I to put the 'WORKSPACE" name?
Thanks for any help.
Claude
Details:
ERR MESSAGE----------------------
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/dms/instrument/ExecutionContextForJDBC
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:365)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:854)
at java.sql.DriverManager.getConnection(DriverManager.java:620)
at java.sql.DriverManager.getConnection(DriverManager.java:200)
at javaapplication6.ConnectionExample.driverManager(ConnectionExample.java:138)
at javaapplication6.Main.main(Main.java:36)
Caused by: java.lang.ClassNotFoundException: oracle.dms.instrument.ExecutionContextForJDBC
at java.net.URLClassLoader$1.run(URLClassLoader.java:217)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:205)
at java.lang.ClassLoader.loadClass(ClassLoader.java:319)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294)
at java.lang.ClassLoader.loadClass(ClassLoader.java:264)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:332)
... 8 more
Java Result: 1
BUILD SUCCESSFUL (total time: 0 seconds)
---------------------ERR MESSAGE
JAVA code------------------it compiles but throw an error when running there -> (*)...
final String driverClass = "oracle.jdbc.driver.OracleDriver";
final String connectionURLThin = "jdbc:oracle:thin:@jeffreyh3:1521:CUSTDB";
final String userID = "scott";
final String userPassword = "tiger";
final String queryString = "SELECT" +
" user " +
" , TO_CHAR(sysdate, 'DD-MON-YYYY HH24:MI:SS') " +
"FROM dual";
public void driverManager() {
Connection con = null;
Statement stmt = null;
ResultSet rset = null;
try {
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
con = DriverManager.getConnection(connectionURLThin, userID, userPassword); // (*) prob here
stmt = con.createStatement ();
rset = stmt.executeQuery(queryString);
rset.close();
stmt.close();
} catch (SQLException e) {e.printStackTrace();
--------------------JAVA JDK 1.6
My system ------------------------
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - ProductionYes, the network connection could not be established. Like the error said.
What you're asking about is the exact reason, but that could be any number of things and not at all related to code. You could have the wrong host, the wrong port. A firewall could be blocking the outgoing connection, a firewall could be blocking the incoming connection. Etc. etc. -
I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?
Thanks,
Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
But thank you for your reply! -
My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged -
My iphone can't load facebook "news feed" when connect wifi but when connect 3G it load normal . can't connect all phone . pleas help me
Hi, Shadiamond Murray.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection. The second article cover the recommended settings for current Wi-Fi access points.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H. -
Hi, I own a I phone 4, a ipad 1 and just purchased a ipad 3, I have 15g worth of icould data but my photostream doesn't stream all of my photos to my new ipad when connected to wifi???? It appears to be streaming photos from the last 10 or so days but no more? I have enough storage on my new ipad??
Photo Stream does not count towards your iCloud storage plan.
Your iOS devices keep a rolling collection of your last 1000 Photos in the Photo Stream album. Only photos taken within the last thirty days and since Photo Stream was activated will be synced. -
Accidentally selected new phine when connecting a phone that was already associated to the same iTunes account? Is there a way to reverse this to see the backed up data formthis phone according to its old association to that account.
On the Summary page of your phone in iTunes, select "Restore Backup."
-
Problems when connecting and disconnecting MBP and TBD
Hello,
I have problems with connecting and disconnecting my macbook pro retina 13" to my thunderbolt display. Everytime I disconnect my MBP form my TBD with the lid closed it takes approximately 10 seconds until my MBP has recognized that the TBD is no longer connected and the MBP screens turns on.
On the other hand I also have a problem when I reconnect my MBP to my TBD. Approximately every second time my MBP does not recognize that the TBD is connected again and neither the MBP nor the TBD turns on. The small light on the power cabel of my TBD does not light up. It is as the TBD would'nt have any power. Pushing buttons on my Apple Bluethooth doesnt help. I have to disconnect and reconnect the thunderbolt and the power connector a coupl of times until the MBP finally recognizes the TBD and turns on. In some cases a different background picture is shown on the TBD than the one I usually have on my MBP.
The problem is very annoying especially because I connect and disconnect both devices and it really costs time.
I really hope there's someone who can help with the problem. Do you think this may be hardware problem of my MBP or TBD?
Thanks in advance for your help.HI there,
The first thing I would recommend is checking for any new software updates while using the display, this will check for any available firmware updates for the display. If you continue to experience issues, then you may want to take a look at the article below for some further troubleshooting steps.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W. -
I have an 80 GB iPod Classic that has suddenly developed severe problems. I'm running iTunes on Windows 7 64 bit.
It was working fine until last night, when I connected it to iTunes to add 6 songs. (Four of these were bought on Amazon.com and 2 ripped from CD's). It accepted the songs and played them fine when connected. When I clicked the icon in iTunes to eject the iPod, it came up with the "OK to Disconnect" and progress bar as usual. However, this time the progress bar didn't start to fill in. It just sat there.
After several minutes the progress bar finally filled in and returned to the menu... but instead of displaying the cover flow on the right side as usual, it showed a gray box with "No Music."
When I tried to re-connect it to my computer, iTunes would not recognize it. My computer also wouldn't recognize it at first... after several minutes, it came up as a generic removable device. Attempting to right-click on it or eject it from Windows was unsuccessful.
The iPod itself displayed "Connected" and alternated the plug image with the spinning arrows. It never said "Synchronizing" as it usually does.
Furthermore, my computer's performance degraded severely while the iPod was plugged in. iTunes itself froze, and even my other applications (such as my web browser) would not work correctly. This all cleared up as soon as I unplugged the iPod. If I tried to initialize iTunes while the iPod was plugged in, it would not open. It opened immediately when I unplugged the iPod.
Finally, despite claiming to have no music or other contents (it had contained only my iTunes music library, which is about 26.5 GB), in Settings the iPod claimed to have only 5.3 GB of free space.
Resetting the iPod with Select/Menu made no change. I was able to put it in diagnostic mode and check the hard drive, which gave these results:
Retracts: 381
Reallocs: 0
Pending Sectors: 10
PowerOn Hours: 417
Smart/Stops: 381
Temp: Current 24c
Temp: Min 15c
Temp: Max 48c
When I put the iPod up to my ear I hear a steady, faint high-pitched sound and an occasional very faint crackling noise. When it shuts down the sound continues for a few seconds, then ends with a kind of squeaking sound.
The iPod is more than 5 years old, so I'm prepared for the probability that it's fried. But I'd like to try everything before I go ahead and spring for a new one.The iPod's hard drive probably has data corruption. That does not necessarily mean there is a hardware problem. Hard drives, including the ones in computers, can develop data corruption.
Try putting the iPod into Disk Mode
http://support.apple.com/kb/ht1363
If it goes into Disk Mode, run iTunes on the computer and connect the iPod. To eliminate other potential issues, you should disconnect other USB devices (you can leave standard keyboard/mouse connected), and connect the iPod to a direct USB port on the computer.
iTunes may prompt you to do a Restore, which you should do. This will erase the iPod, re-install its software, and set it to default settings. If the problem was only data corruption, and there is no hardware problems, the iPod should have a "fresh start." You can sync it from your iTunes library.
If the iPod does not go into Disk Mode, or if doing a Restore fails, the iPod's hard drive may be faulty. -
Lagging problem when connected to a Samsung Central Station 23"
Hi,
I bought myself a Macbook Air(Summer, 2011 Edition) about 3 months ago roughly,
and I also bought myself a Samsung Central Station 23" which works just as a thunderbolt or cinema display but much cheaper and much elegant.
It also sends audio signal as well as usb datas when connected to a pc or a mac.
Before buying this monitor, I searched for any history or experience regarding performance problem when hooked upto an external monitor the other users had,
and while some people say there are no such problems with new intel i core series which includes much advanced graphic core and much faster processor,
many people said they have experienced performance problems to some dregree as well.
Now that I seem to have this huge problem of lagging with my MBA when connected to Samsung Central Station,
I still have no idea why it is happening, nor how to fix the problem.
I use my Macbook Air connected to a Samsung Central Station 23" and it runs 1080P Full HD resoultion, which isn't that big deal to incur performance decline.
I shut my MBA screen when I use the external monitor, so there isn't much thing to interfere with the performance.
I don't know about other people who use an external monitor, but my central station monitor works on Full HD resolution only when i close my MBA screen or connect it as a dual screen. If the screen is left open, it runs with the same resolution as the macbook air.
when I start sensing decline in frame I always had my MBA open to lower the resolution which seemed to work fine again.
But these days,even when it's disconnected from the monitor it seems to have problem and the only way to bring it to the normal condition is to restart it.
when connected to the monitor It's even hard to open few tabs on Safari and play a web flash game.
It lags so hard I cannot even turn to other screen on mission control or swith to other browser tab without making it delay for a second.
I checked CPU and RAM resources when it started lagging, but almost 90% of the CPU resources was idle and more than 500MB of RAM was free.
After restarting the computer CPU remained the same, but more than 2G of RAM was now free.
Im guessing it has something to do with GPU performance but not sure how to fix the problem.
Do you think it's my Macbook Air's hardware problem or is it the monitor? or something else?I have the same issue. Were you able to find a resolution for this issue?
-
E71 - problem when connecting to pc
Hello everybody
I have problems when I want to connect the phone to the pc using pc suite. If I connect using mass storage then everything is ok, but if I try to connect via pc suite then I get the problems.Sometimes the phone connects sometimes I get an error with the usb.
In the attachement you will see the error. Now I tried again to connect using pc suite but it doens't connect at all.
Message Edited by alintatoc on 14-Jun-2009 10:44 AM
Message Edited by alintatoc on 14-Jun-2009 10:45 AM
Attachments:
nokia cable.jpg 88 KBhi there,
I think u can do this
Go to Control Panel->add/remove programs->Nokia connectivity cable driver->change->repair
connect ur phone to the computer in PC suite mode use latest version PC suite
Check this out
Cheers........
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks. -
Firewire device causing problems when connected to Mini via LaCie ExtHD/Bus
Hello there..
Just bought LaCie 300GB Ext.HD/Bus(Firewire &USB). It was recognized by my Mini no problem. I have used the firewire connection between The HD and the mini. The problems begin when I try to connect my M-Audio firewire audio interface (it's mains powered, by the way) to one of the firewire bus inputs of the LaCie - then every action gets the dreaded spinning beachball and I have to shut down etc. The connection of this device has even prevented the HD being recognized by my system, in the case where I have tried having it already connected and powered up before switching on and connecting the HD to the Mini.
I've tried other things such as PMU reset, to no lasting avail.
This is the same firewire audio interface that has worked fine for months when plugged directly into the Mini, so why should there be a problem when it's connected to the bus port of the HD?
Now, as a temporary solution, I have changed the connection between the Mini and the HD/Bus from Firewire to USB - this means I can now use the FW port on the Mini to connect my audio interface (as before). The problem with this is that I work alot with video as well as audio, and have learned that it's very advisable to use firewire drives when working on video...but there is only one FW input on my Mini, so if the La Cie HD is using that, there is no port for audio interface to go in...that's why I bought this particular HD - more storage on a FW HD which has extra FW bus ports for such things as audio interfaces!
I hope I've explained the problem OK, thank you in advance for any advice.
JimmyYou don't mention which model you have, but this is from the M-Audio Firewire 410 Manual Troubleshooting section:
The FireWire 410 has been designed to give you high performance and professional quality audio. It has been tested under a wide range
of systems and operating conditions. In the real world, however, there is a nearly infinite number of possible operating scenarios, any of
which could affect your system’s performance. Much like owning an automobile, “your mileage may vary.” This section can not begin to
cover all possible issues you may encounter, however we want to give you some suggestions on common problems you may experience.
One thing to avoid is connecting too many devices. The FireWire bus is a dependable, high-speed, high-bandwidth protocol which is ideally
suited for digital audio. Nonetheless, it’s important to remember that audio and multimedia streaming places considerable demands on
your processor and the FireWire bus. Although it is theoretically possible to chain many multiple FireWire devices in series, doing so may
potentially degrade your audio performance.
I guess this degradation could also affect the Firewire HD. Maybe there is a simple fix, but it sounds like the M-Audio people have been down this road before. -
TS2634 problem when connecting with tv
when connecting my ipad 2 with the cable connector hdmi to a led tv it connects without problems about a minute o so, and then it starts losing signal and goes to black
Unfortunately, the only reason it is an absolute link is that
I recently tried that to see if it solved the problem-
as you see- it didn't.
Th eproblem exists whether it is relative or absolute.
A programmer I work with has suggested I re-administer the
site from a PC using Contribute 4.0 in Windows and re-upload the
page- just in case the mac has attached a "string" of code that is
fooling the pc's.
I will try that tonight.
Wish me luck, as I have absolutely no idea why this is
happening- and I consider it a bug, since none of my other pages do
it.
Scott -
i have a 30GB video ipod, no problems at all when using the ipod and no problems when using itunes without the ipod connected, but when i connect the ipod itunes suddenly freezes and wont respond until i disconnect the ipod, at which point i get a message saying "the ipod "eddys ipod" cannot be synced, the required file cannot be found" (i manually manage my music)
got some screenshots
ipod connected : http://img217.imageshack.us/i/ip2j.jpg/
after i disconnect my ipod, which itunes then suddenly recognises : http://img815.imageshack.us/i/ip1z.jpg/
if youre wondering why my itunes is empty its because a deleted and reinstalled it incase that was the problem
any ideas anyone ?
thanksdear eddy,
how did you got it working because i have the same problems like you have. except i get the message that there is something wrong with the hard disk of my ipod. also my internet turns out (have wireless internet) and get every time i connect my ipod the message that my ipod hasn't been connected to a usb port 2.0 while all my usb ports are 2.0
Plaese someone help me, because i have tried everything.
greets -
Getting problem when connecting to SMTP server through java code
Hi all,
I am getting problem when i am going to connect with "Kerio SMTP server" through java code. The error what i am getting is :
"[16/Sep/2008 15:59:09] Sent: Queue-ID: 48cf8a73-000000f9, Recipient: <[email protected]>, Result: failed, Status: 5.3.2 554 5.0.0 Too many hops (101, max 100), message looping" when sending an email from [email protected]Looks like something is set up wrong on your server that's causing messages
to be forwarded around a loop too many times without ever reaching the destination.
For instance, if server A forwards to server B, and server B forwards to server A,
this would happen.
Maybe you are looking for
-
My address bar where I type in the URL has disappeared. I've searched through Help options, and found only one piece of moderately useful information (following) in Menu Reference. It is: "Open Location- Focuses on the Firefox URL bar so you can type
-
How to use a dropdown in a workbook which can work in different queries?
Hi Experts, I have created a workbook which can display the query by using the 'Push Button'. One query is based on material analysis and another one on product analysis. It works good.. In that workbook, I want to use a dropd
-
HP Laserjet M1319f MFP scaner not scan continues pages.
Hi. I am using HP Laserjet M1319f MFP ALl in one printer & scanner software. Previously installed in windows 7, scanner function works, it will scan multiple docs in one pdf or one file. But now i have windows 8.1 installed. I have install the Printe
-
I have an Inoi NAS hard drive connected to my network using SAMBA. When I try to connect on my MacBook or another MacBook Pro, opening certain folders causes the Finder to crash. Same folder does it on both machines. However, on another Windows lapto
-
JCreator, or NetBeans, I have been using JCreator up to this point and it works well, but what is everyones opinion on the better program. Thanks for any response.