Thanks NI/Discussion Forum

I just want to start a post where anyone can say thanks to all the people who are part of NI and this discussion board.
I sometimes asked elementary questions to some really savvy experts, but patience and a committement to helping me out was the only type of response I received.
So thank you very much to all the people in this discussion forum, employees and common folks, who make NI and LabVIEW seem approachable to naive users.
Thanks a bunch.

Thank you!  Every new post provides help to others who are part of the discussion forums.  We appreciate the knowledge passed on by users of Measurement Studio and other NI products.
Thanks!
Tyler Tigue
Applications Engineer
National Instruments

Similar Messages

  • Hi, I wanted to know if I can embed a discussion forum into my muse website. Is there a widget I can buy for that? Thank you!

    Hi, I wanted to know if I can embed a discussion forum into my muse website. Is there a widget I can buy for that? Thank you!

    Hi Nicolás,
    If you are hosting the site on business catalyst then you integrate the forum's module in your muse site, just like how blogs are integrated. I don't have an tutorial video on forums integration in Muse, but the process outlined in the one below, which is for blogs, would be very similar to integrating the forums as well.
    Muse Jam Sessions_50_EmbeddingBlogs
    - Abhishek Maurya

  • Welcome to the Cisco CSR (Cloud Service Router) Discussion Forum

    Welcome to the Cisco CSR (Cloud Service Router) Discussion Forum!
    This forum helps CSR users interact, share knowledge and build communities with one another.
    We hope you enjoy participating in the CSR discussion forum!
    Best Regards,
    Cisco CSR Product Team

    hi,I have a question on sql database high availability. I have tried using database mirroring, where I am using sql standard edition, in this database mirroring of synchronous mode is the only option available, and it is giving problem, like sql time out errors on my applicatons since i had put in the database mirroring, as asynchronous is only available on enterprise version, is there any suggestions on this. thanks ---vijay

  • How Can I Delete my DIscussion Forum Account?

    I would like to delete my discussion forum account. I cannot seem to find a method to do this.
    Is there a way? Thanks.

    Not as far as I know. Just don't use it.

  • Slow to a crawl in the Discussions Forum

    Today has been maddeningly slow . It was taking a few minutes to just open a subject , a couple times I timed out and/or the site appeared to actually go down . I am finding it strange that I don't see much mention of this . At first I thought it was my eMac but the Powerbook was also slow and when I tried the PC , it to was slow . This is just in the Apple Discussions Forum everything else is fine so it's not AT&T
    A search for "slow" showed up some problems in Nov. that were blamed on "code tweaking" so I assume this may be the same problem . Is there someplace that tells about current issues or problems ? Ebay mentions in advance when they will be doing maintenance .

    Hi Kady
    Thank you for the info . I thought it was my computer because I was having other troubles .
    Was it memory leaks ? It would be nice if something could be posted when things slow down. Hear is some info I found ;
    Well, I’m sure you guys and gals know this already, but spend half an hour on the Apple discussion boards at http://discussions.info.apple.com/webx?[email protected]@ , preferably accessing things like “my posts” or other search related activity and you will very soon find some nasty memory leaks.
    Most people find that the ‘Real RAM” consumption of Safari goes up from a a few megabytes to over 200MB within 20 minutes or so., at which time very nasty slowdowns occur (40 secs to a minute to open a link on the pages, despite my 1500 ADSL link and an iMac G5 2 GHz with 2 gig of RAM. The problem causes these slowdowns even when I have more than a Gig of RAM completely free.)
    A number of Apple Discussion Board Level 4’s have been discussing this problem and reporting exactly the same experience. We have been wondering whether to blame you, Apple , Javascript, or Web Crossing. Many people who use this board regularly are simply shifting to other browsers to avoid the problem.
    The leak can be overcome to a large extent by disabling javascript, but this is a very annoying way to have to deal with the issue. Spend half an hour on these boards and I’m sure you will soon get some relevant information!
    Cheers
    Rod

  • Error JBO-26080 with Discussion Forum portlet

    Hi,
    I'm getting an error with the discussion forum portlet.
    This is one way I found to reproduce this problem:
    - reply to a post in a forum
    - do a search that should include the post added before in the result
    - you should get this error
    Unable to perform the operation: JBO-26080: Error while selecting entity for ThreadSearchEntityObject
    Is this a known problem? Does anybody knows a fix/workaround?
    Thanks in advance
    Bye
    Lorenzo

    Hi Pedro,
    I found the portlet on this page
    http://www.oracle.com/technology/products/ias/portal/point_downloads.html
    the one called "OracleAS Discussion Forum Portlet".
    On this same page this forum is suggested to report problems.
    I think this problem is due to some BC4J error, maybe a quick fix/workaround is possible, but I do not know this technology.
    In the next day I'll try anyway to check the source, but I was also interested to know if somebody else has the same problem so to exclude the option of some installation/configuration problem of my deploy.
    Thanks again
    Bye
    Lorenzo

  • What is the significance of the new feature in discussion forum as Kudos, solved and other which has been started?

    hi,
    I just want to know what to do with kudos and other features which has been started recently on discussion forums.
    Why they have been started and how it helps in getting the solution of that query with which someone starts the post.
    Thanks & Regards,
    Samriddh Sarbalhi
    Solved!
    Go to Solution.

    Duplicate Post

  • Is there any way to programmatically get the discussion forum Id using API

    Hi,
    Can any one let me know how to get and set the Discussion service forum Id / category Id to the discussion task flow programmatically using services API's. Here I am using Web center groupspace API's to create and add members to group space from my fusion app. Added the discussion task flow to my fusion app and need to set the category Id / forum Id assigned to that groupspace and display the corresponding discussions. The test connections to discussion forum is success. I am getting all the forums corresponding to that user in my ui. But I want to get the forum that is associated with my groupspace.
    thanks.

    Never mind. Got the solution, can get this through servicesMetaData api.

  • Not able to CREATE FORUM, or DELETE PRODUCT in discussion forum

    Hi,
    I have deployed “Discussion Forum” provided by Oracle.
    For deployment I have followed the document provided, which is available on http://www.oracle.com/technology/products/ias/portal/html/installing.integration.v2.html
    Our application running on mid tier 904_j2ee 9.0.4 at port 80, and infra also running on port 80. URL of my site is www.icai.org which is deployed under mid tier.I have deployed discussion forum in 904_j2ee/j2ee/OC4J_Portal.
    Thease are the information about the deployed discussion forum.
    Application Version 9.0.4.0.99
    Database Version as follows:
    Oracle9i Enterprise Edition Release 9.0.1.5.0 - Production
    PL/SQL Release 9.0.1.5.0 - Production
    CORE 9.0.1.2.0 Production
    TNS for Linux: Version 9.0.1.4.0 - Production
    NLSRTL Version 9.0.1.5.0 - Production
    After deployment, I have registered the provider, and attached this to portal page. Till this stage its working fine. Now Discussion Forum page is appearing, and I am able to add “NEW PRODUCT”. But when I click to “NEW FORUM” link or delete the ‘PRODUCT’ i get following error.
    ERROR
    The requested URL could not be retrieved
    While trying to retrieve the URL: http://www.icai.org/portal/page?
    The following error was encountered:
    •     Access Denied.
    Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
    I am not able to find the error please suggest me as this is very urgent for me.
    thanks in advance
    Dhananjay

    Hi,
    I am getting the error message in the page opening, where "RowKeyValue" is involved. So, please could anyone tell me whats the possible reason for not opening the page.
    regards,
    Dhananjay

  • Discussion Forum  - Retain Portal Login

    Hi all,
    Hope I'm in the right place for this.
    We are looking to install a discussion forum solution (currently running 9.0.4.1.0 - Build: 129).
    Ideally we would like the forum to work in the following way:
    A user logs into the portal, clicks on 'Discussion Forum' tab and posts a message. We would like the message to insert their login name (#USER.FULLNAME#) along with their message i.e. the user doesnt have to register to the forum, or enter their name or email.
    Is this possible with any of the forums out there?
    Thanks for your time.

    Hi There,
    <p/>
    You could check out the Oracle Provider for Jive Discussion Forums on Portal Integration Solutions page. You will need to buy Jive Discussion Forums and then install the providers.
    <p/>
    What you are asking for is definitely possible as the portlets provide a single sign-on mechanism to the users.
    <p/>
    thanks
    Harsha

  • Discussion forum layout could be improved

    In each discussion forum, topics are listed a fixed box nested inside several frames surrounded by white space.
    For example, although Numbers forum has 1,911 topics, with default settings only 15 topics are listed in a 9.2" diagonal box, in the center of my 24" screen. Below the list, I am invited to click through 128 screens to see all 1,911 topics, one screen at a time. (The list length can grow to 50 by editing settings while logged on; I did not see how to do this when viewing the list.)
    Suggestions:
    1. allow scrolling through topics within the list view
    2. allow topic list frame width to scale with the window
    Can a discussion thread view be expanded?
    I hope this is an appropriate comment for this area. Thank you for listening.
    L Jones

    The width of the frame containing a topic's text (incl. scroll bar) is approx. 800 px. This is pretty standard practice on pages with one column of content.
    Even a site like the New York Times', which is five columns wide, has a max width of approx 975 px, with the main body of content and links contained within 625 px.
    A 24" screen is great for many things, but it brings no particular benefit when it comes to viewing web pages at standard resolutions, because most pages are designed with smaller displays and handheld devices (e.g. the iPhone) in mind.

  • Issue Tracker, Bug Tracker, 0.9,Discussion Forum 0.91!

    Hi all!
    My question is very specific.
    I have Software Projects application in Russian edition.(I translate this application).
    I can put it for you.
    Do you have Issue Tracker application, Bug Tracker 0.9 application, Discussion Forum 0.91 application in Russian edition ?
    Thanks,
    Roman.

    Unfortunately the problem persists on OC4J904, so the alternative for you is to use OC4J902, you can setup a new container on a different port (other than used for 902) and register the provider using the direct URL of the OC4J902 container. This should solve the problem.

  • Discussion Forum Portlet on RAC Environment

    Hi
    I have installed Discussion Forum Portlet but I am seeing the following error intermittently:
    Unable to perform the operation: JBO-26041: Failed to post data to database during "Insert": SQL Statement "BEGIN INSERT INTO MESSAGE_CLOB(ID,AUTHOR_ID,MESSAGE_DATE,CONTENT,THREAD_ID) VALUES (:1,:2,:3,:4,:5) RETURNING ID INTO :6; END;".
    I think the problem is because we have our database in a RAC environment where our Portal schema is. I am not sure how to specify the same details in the bc4j.xcfg file. The following are the details that I have in the bc4j.xcfg:
    <ConnectionDefinition name="df">
    <ENTRY name="JDBC_PORT" value="1521"/>
    <ENTRY name="ConnectionType" value="JDBC"/>
    <ENTRY name="HOSTNAME" value="hamcheese.corp.ihop.com"/>
    <ENTRY name="DeployPassword" value="true"/>
    <ENTRY name="user" value="df"/>
    <ENTRY name="ConnectionName" value="df"/>
    <ENTRY name="SID" value="asdev1"/>
    <ENTRY name="password" value="df"/>
    <ENTRY name="JdbcDriver" value="oracle.jdbc.driver.OracleDriver"/>
    <ENTRY name="ORACLE_JDBC_TYPE" value="thin"/>
    </ConnectionDefinition>
    How can I specify the two hostnames in this file?
    Please let me know.
    Thanks
    Hari

    Hi Hari,
    I am not sure how this would work, but i think you could try posting the issue on the Database / JDBC forums, specifying the issue as
    How to specify connect details for a RAC m/c in the Datasource file.
    You might get some answers there.
    thanks,
    Harsha

  • Creating a Discussion Forum in APEX

    I am trying to provide a discussion forum functionality in my APEX application. If there are any plug-ins/similar applications, please let me know.
    thanks in advance!

    thanks. all packaged apps have been removed for APEX 4.1. If anyone has a copy of the packaged app on 4.1, would appreciate if you can share. thanks

  • Viewing Discussion Forum in public group space

    Hi all,
    I have the following requirement:
    a) let anonymous users visit a group space and
    b) let them view discussion forum content inside that space.
    I can enter the group space as anonymous user, but the Discussions Forum portlet tells me I'm not authoritzed to view this portlet.
    How can I make this work?
    Thanks in advance

    Hi,
    Write a dummy custom Identity Asserter/Authentication Provider and create a Weblogic subject for anonymous users so that weblogic knows that it is a authorized user and then it will let it do what a logged in user can do.
    Thanks
    Vishnu

Maybe you are looking for