Thanks Skype - do I dare re-enable the automatic "...

I'd lke to thank Skype for the refund that was (eventually) processed. It seems that I'd made the error of re-enabling the automatic "top-up" (credit addtion) option, when my credit was (according to Skype) "de-activated" (which is a designation created by Skype, I certainly didn't request it).
What I'd like to do is to re-enable the "automatic top-up option".  This will permit my credit card and/or PayPal account to be charged, in the event that my Skype Credit goes below a certain amount ($2.00 US, the last I've heard).
However, I'm extremely reluctant to do this. My concern has to do with the possibility that the Skype software will *INSTANTLY AND AUTOMATICALLLY* add another $25.00 to my credit (and bill me). I neither need, nor desire another $25.00 to be *INSTANTLY AND AUTOMATICALLY ADDED* to my Skype credit.
That said, I do occasionally travel internationally, and would prefer that the option for additional automatic Skype credit were there. When I need it. Not when Skype wants to charge me more, but when I - as a customer - *desire* the additional $25.00 charge.
I will NOT re-enable this feature, until I receive a response from a Skype *STAFF* person, who will be able to explain to me - CLEARLY AND UNEQUIVOCALLY* that my choice of re-enabling this feature will nto result in an *AUTOMATIC* charge of $25.00 US, regardless of what I have in my account at the moment.
I wish Skype could spend more time trying to understand the needs and desires of its users, instead of figuring out how to charge them more.
Thak you,
--Raj Seshu

There seems to be a slight difference in how we're using language. Perhaps my question wasn't clear. It was not about what I "needed" to do. It was about what the system would *AUTOMATICALLY* do, without warning me, or requesting my consent in any *EXPLICIT* manner.
> If you still have valid recharge payment information on file you won't need to buy any Skype credits.
If I don't get a reply to this in a day, I'll assume that you mean: "If your recharge information is valid, and you have at least $2.00 of credit, then the system will not AUTOMATICALLY increment your credit without asking for your EXPLICIT consent." (However it's not 100% clear that this is what you're saying, based on the words you have written.)
> If you don't have valid payment inforation on file you can only re-enable auto-recharge via either a subscription or Skype credit purchase. You don't need to purchase 25 USD though as you can also use the minimal amount of 10 USD. During the credits purchase make sure to check the auto-recharge opt in checkbox.
This is incorrect. If the auto-recharge information is invalid, Skype's software will AUTOMATICALLY increment the user's credit by $25.00, without asking for the user's consent in any way. Again, we are speaking at cross-purposes, it seems. You keep talking about what I or a user "needs" to do. And I keep asking about what the systems AUTOMATICALLY does. There's a critical difference.

Similar Messages

  • How do I enable the automatic download of music books etc so that they stay enabled

    I have just received my new ipad3 and tried to download a book sample, but I cannot seem to enable the automatic download. When I tap the screen the legend goes from off to on for about 5 seconds and then reverts to off. What am I doing wrong.

    OK I have just found out how to do this from a previous question. Sign out and then back in and it all works as it should.

  • How can I remotely enable the automatic updater preferences?

    How do I remotely control the options in the Updater preferences?

    I assume you mean by remote login.
    To enable via SSH to an admin account:
    sudo launchctl load -F /System/Library/LaunchDaemons/com.apple.screensharing.plist
    To disable:
    sudo launchctl remove com.apple.screensharing

  • Is there any way to re-enable the automatic list making in Pages 5?

    I always used - for bullet points in my note taking, then hit return and it automatically made another line starting with a -
    Is there a way to turn this back on? It's not a big deal.. but I do miss this simple automatic feature.

    Most people have asked how to turn this off in previous versions of Pages. So now it seems that it's one of the many, many features that have been removed. Leave feedback for the Pages team using the link in the Pages menu.

  • How do I enable the HP Truevision webcam?

    I'm trying to set up a SKYPE.com account and cannot enable the HP Truevision webcam on My HP Pavillion Dv7-6163.

    Hello ryinng,
    I see that you are trying to activate the webcam on your computer. I would like to help with this issue but I need some information.
    Can you provide the model and product number of the computer? Here is a link that shows how to find that information.
    When you try and use Skype do you get any error messages concerning the camera? Have you tried to use the webcam on any other program?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Automatic scheduling of the automatic payment programme

    Hi All,
    My client would like to set up different ways of running the automatic payment programme. They have different payment methods which mean different things.
    First option: They would like payment method P1 for example to run every Mondays and thursdays (on an overnight basis). The payment should clear the specified vendors and transferred to the bank server without any authorisation.
    2nd option: Would like the payment programme to run automatically again this is driven by the payment method and should run overnight, but would require authorisation before the payment can be transferred to the bank server.
    3rd option: To run a  normal payment run on the same day.
    For all options, they would like to send off the remittance advice only when they have confirmed that the payments have gone through the bank server okay.
    Any help will be much appreciated.
    Thanks.

    Hi
    You can do it with the AUTOMATIC JOB SCHEDULING. For this take the ABAPer help.
    1st: For 1st payment method, create one BDC program with all details and the parameters will be constant except the "Run date" and "Next payment date". In TCODE:SM36, you can schedule job at specific time. In that job give this BDC program name.
    Once you do the payment run system automatically, clears the Vendors
    Data to Bank server is possible using the IDoc - ( take the help of ABAPer in developing this IDoc) using the Automatic Job scheduling the IDoc, you can maintain this after completion of the above job. Before to this get the data to be sent to the Bank Server in a template format with SAP field mapping.
    2nd: As this payment method requires the authorisation, you can go by manual execution of the IDoc , instead of the Automantic job scheduling.
    3rd: Same like 1st..but the day of execution will deferrs...(ABAPer will take care of it)
    Disadvantages: 
    - in the BDC program you have to hard code the number range
    - you can't have an option to block / release the block using the edit proposal option
    - IDoc creation depenedency should based on the volume of the payment documents: means after how much time this IDoc job scheduling should happen
    VVR

  • HT3986 Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard? Many Thanks

    Hi All
    Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard - the standard wired apple keyboard works fine via this key but not the new wireless keyboard?
    Many Thanks

    Holy crap, this fixes the issue.  At least temporarily it has.  I should add that my issue was single finger forward/back swipe stopped working on the magic mouse in Firefox since Mavericks came along.  I have been fighting this since I upgraded to Mavericks a few months ago.  Thank you, tbirdvet.  You have no idea how much easier you just made using my iMac again.
    Message was edited by: wadems

  • HT1619 I can't find where to enable the infrared receiver on my mac  OS X 10.9.2, could anybody help me? thanks

    I can't find where to enable the infrared receiver on my mac  OS X 10.9.2, could anybody help me? thanks

    The MacBook Air has no IR receiver.  There are USB units, such as:
    <http://twistedmelon.com/mira/hardware.html>

  • How do I enable the eliminate browsing history on my IPad? Thanks

    How do I enable the remove browsing history function on my IPad?
    thanks

    If you want to clear your browsing history use Settings > Safari > Clear History.
    To turn on "Private" browsing touch the URL field and then touch "Private" at the upper-left of the keyboard.

  • Can I enable the root user account from the log in screen when I am locked out of the machine?

    Hello everyone,
    I am working on my friends mac to get it ready to sell. I went into the advanced options of the user and changed the name of the account. That's all I changed. I did read the warning that said if anything was changed it could cause damage, that's why I only changed the name of the user account. I didn't want to mess with anything else. Well, needless to say, I am locked out of the machine. Apparently the root user, system administrator, account was not enabled and I am stuck at the screen that I can get to with my installation disc. So how can I enable the root user account and get back onto the machine from the screen I am at? Can I enable the root user from terminal? I spent a good 8 hours yesterday researching this topic and have come up empty. Changing passwords from commands in terminal is not the problem. I am given just one account to choose from to log on and it's not accepting the password because of the changes I made in the advanced options menu.
    Is there any hope of getting this thing going again? Or have I just screwed myself over?
    Thanks for your help!
    Leah

    You can reset the password.
    http://pondini.org/OSX/Password.html
    Do you need to recover data from it before you sell it?  If not you can just wipe the disk and prepare it for sale.
    See  > Apple What to do before selling or giving away your Mac
    http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
    Also See Thomas Reed's How to Prepare your Mac for sale
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
    and this thread
    https://discussions.apple.com/thread/5474062?tstart=0

  • What files do I need to download iPhone photos to a thin client (HP)? Apple Mobile Support gives 4 dll files to enable the iPhone to be detected and charged but the thin client doesn't see the camera or hard drive.

    The iTunes Installation files include 4 driver dlls that I can install on a Windows thin client to enable the iPhone to be charged.
    The iPhone hard drive or photos are not detected.  I guess I need scanner driver support to cope with the camera.
    Can anyone tell me which files from the iTune installation set are needed.
    It is not practical (or even possible?) to install the whole iTunes package.
    I've seen this question asked by a lot of people but never seen an answer. 
    Please, can someone help... 

    Thanks for the reply. 
    A thin client is used to connect to a Terminal Server, or in my customer's case, a Citrix Server.  I need the thin client to see the iPhone as a camera and pass it to the Citrix Client so the photos can THEN be either stored on a network storage device, or e-mailed.
    Because the thin client doesn't even SEE a camera (i.e. the iPhone) it won't be able to connect to iCloud to do anything useful. 
    I think the question I should be asking, is how do I give the thin client Camera Support.
    I've just seen a 2008 forum comment that said the iPhone DOESN'T handle photos through iTunes, but the PC (Scanner support) or MAC (iPhoto) handles them directly.  I should be putting the question to HP.
    This is still a good place for THIS question, because I've seen so many iPhone users asking it...
    If I get a satisfactory answer I'll post it back here.

  • After enabling the Built-in Administrator account, it is not shown on Welcome screen

    Hello,
    I have Windows 7 Starter SP1.
    I have previously successfully enabled and then logged on, to the built-in administrator account,  and then when I had finished using it, disabled it again.
    Unfortunately today, I found that when I enabled the built-in administrator account, it no longer appears on the Welcome screen.
    I went through the process of enabling it by doing:
    Start/Search "CMD"/right-click CMD/Run as administrator.
    net user administrator active:yes
    It confirms: "The command completed successfully."
    However, when I log off and log back on (or do shut down and restart), the Welcome screen does not display any option for the Built-in Administrator account.
    I have also tried doing the above in Safe mode, and also using Command Prompt from a Rescue disk.
    As background information:
    The reason why I wanted to access this account today, was because I attempted to defrag a partition listed as "(1% fragmented)" and after Defrag appeared to complete while at "Pass 2",  the partition is still shown as 1% fragmented.
    I would appreciate advice how to resolve the issue with the built-in administrator account.
    Regards,
    Robert339

    Hello Niki Han,
    Thank you for your response. I have not yet had an opportunity to look into what you have written  but wish to thank you for that information.
    Meanwhile, I would like to discuss the possible cause for this issue. I know the date when I last successfully accessed the built-in Administrator account, which was April 18, 2012. 
    Since I was last able to use that account on April 18, 2012, I have made no changes to the system other than install all Important Microsoft Updates through Windows Update.
    A full scan with Windows Defender finds no threats.
    A full scan with Avast finds no threats.
    I beleive Microsoft may wish to ensure that this issue has not been caused by any of the following  30 updates. If it has been caused by one of these updates, then Microsoft should consider issuing a further update to correct this.
     - - -  Extract from Windows Update History for period April 18, 2012 and the date I noticed this issue of May 18, 2012, Starts: - - - -
    Definition Update for Windows Defender - KB915597 (Definition 1.125.1635.0)
    Installation date: 13/05/2012 19:31
    Security Update for Microsoft Silverlight (KB2636927) 
    Installation date: 10/05/2012 15:44
    Windows Malicious Software Removal Tool - May 2012 (KB890830) 
    Installation date: 09/05/2012 22:51
    Update Rollup for ActiveX Killbits for Windows 7 (KB2695962) 
    Installation date: 09/05/2012 22:45
    Definition Update for Windows Defender - KB915597 (Definition 1.125.1373.0) 
    Installation date: 09/05/2012 22:45
    Security Update for Microsoft Silverlight (KB2690729) 
    Installation date: 09/05/2012 22:45
    Security Update for Microsoft Office 2007 suites (KB2596880) 
    Installation date: 09/05/2012 22:33
    Security Update for Microsoft Office Excel 2007 (KB2597161) 
    Installation date: 09/05/2012 22:32
    Security Update for Microsoft Office Word 2007 (KB2596917) 
    Installation date: 09/05/2012 22:31
    Security Update for Microsoft Office 2007 suites (KB2596672) 
    Installation date: 09/05/2012 22:31
    Security Update for Microsoft Office 2007 suites (KB2597969) 
    Installation date: 09/05/2012 22:29
    Security Update for Microsoft Office 2007 suites (KB2597162) 
    Installation date: 09/05/2012 22:28
    Security Update for Microsoft Office 2007 suites (KB2596792) 
    Installation date: 09/05/2012 22:27
    Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 SP1 x86 (KB2604115) 
    Installation date: 09/05/2012 22:16
    Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x86 (KB2656405) 
    Installation date: 09/05/2012 22:16
    Security Update for Windows 7 (KB2688338) 
    Installation date: 09/05/2012 22:12
    Security Update for Windows 7 (KB2660649) 
    Installation date: 09/05/2012 22:12
    Security Update for Windows 7 (KB2659262) 
    Installation date: 09/05/2012 22:11
    Security Update for Windows 7 (KB2676562) 
    Installation date: 09/05/2012 22:11
    Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 SP1 x86 (KB2656411) 
    Installation date: 09/05/2012 22:11
    Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x86 (KB2604121) 
    Installation date: 09/05/2012 22:11
    Security Update for Windows 7 (KB2690533) 
    Installation date: 09/05/2012 22:04
    Security Update for Windows 7 (KB2658846) 
    Installation date: 09/05/2012 22:04
    Definition Update for Windows Defender - KB915597 (Definition 1.125.1137.0) 
    Installation date: 06/05/2012 14:54
    Definition Update for Windows Defender - KB915597 (Definition 1.125.1090.0) 
    Installation date: 03/05/2012 23:48
    Definition Update for Windows Defender - KB915597 (Definition 1.125.886.0) 
    Installation date: 02/05/2012 15:09
    Definition Update for Windows Defender - KB915597 (Definition 1.125.655.0) 
    Installation date: 28/04/2012 23:55
    Definition Update for Windows Defender - KB915597 (Definition 1.125.402.0) 
    Installation date: 25/04/2012 01:08
    Definition Update for Windows Defender - KB915597 (Definition 1.125.146.0) 
    Installation date: 20/04/2012 16:10
    Definition Update for Windows Defender - KB915597 (Definition 1.123.1936.0) 
    Installation date: 18/04/2012 15:55
    - - - - End of Extract from Windows Update History - - - -

  • How to enable the Save button in ALV_GRID_DISPLAY function module

    Dear experts,
                    I Created a  ALV report by using ALV_GRID_DISPLAY functional module ,i need to enable the SAVE button ,my reqirement is to trigger some event in save button, then if i created own PF status existing icon are hidden, mention in below screen shot.
    suggest me
    Thanks
    sivashankar k

    Hi sivashankar,
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
    *   I_INTERFACE_CHECK              = ' '
    *   I_BYPASSING_BUFFER             =
    *   I_BUFFER_ACTIVE                = ' '
           i_callback_program             = sy-repid
           i_callback_pf_status_set       = 'SET_PF_STATUS'
            i_callback_user_command        = 'USER_COMMAND'
    FORM  set_pf_status USING rt_extab TYPE slis_t_extab.
       SET PF-STATUS 'MENU'.
    ENDFORM.                  
    ""Handle use action
    FORM user_command USING r_ucomm     LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
       CASE r_ucomm.
        WHEN 'SAVE'.
       ENDCASE.
    ENDFORM.
    PF STATUS : MENU (copied STANDARD(gui status) from SAPLKKBL, do changes as per requirement)
    Regards
    Sreekanth

  • How to enable the SAVE LAYOUT button?

    When using CALL METHOD G_ALVGRID_HDR->SET_TABLE_FOR_FIRST_DISPLAY, how do I enable the SAVE LAYOUT push button?
    It shows the Change layout button but does not allow me to save the layout as the SAVE LAYOUT button is not available.
    I am using the following code but it does not show the SAVE LAYOUT button.
      CALL METHOD G_ALVGRID_HDR->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          I_SAVE                        = L_SAVE
          IS_VARIANT                    = LS_VARIANT
          IS_LAYOUT                     = LS_LAYOUT
          IS_PRINT                      = LS_PRINT
          IT_TOOLBAR_EXCLUDING          = I_EXCLUDE
        CHANGING
          IT_SORT                       = I_SORT_HDR
          IT_OUTTAB                     = I_OUTTAB_HDR[]
          IT_FIELDCATALOG               = I_FCAT_HDR
        EXCEPTIONS
          INVALID_PARAMETER_COMBINATION = 1
          PROGRAM_ERROR                 = 2
          OTHERS                        = 3.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Pl advise.
    Thanks,
    Ven

    pass the variant and enable is_save = 'A'.
    in my case I had to upgrade the gui also.

  • How to enable the check box using cl_salv_table?

    Hi Experts,
                 what code will change for to enable the check box in the following Report program?
    REPORT  ZMA_ALV_OOPS2.
    TABLES:MARA.
    TYPES:BEGIN OF T_MARA,
          SEL   TYPE C,
          MATNR TYPE MARA-MATNR,
          WERKS TYPE MARC-WERKS,
          LGORT TYPE MARD-LGORT,
          LABST TYPE MARD-LABST,
         END OF T_MARA.
    DATA:TB_MARA TYPE STANDARD TABLE OF T_MARA,
         WA_MARA TYPE T_MARA.
    DATA: GR_TABLE TYPE REF     TO CL_SALV_TABLE.
      DATA: GR_FUNCTIONS TYPE REF TO CL_SALV_FUNCTIONS.
      DATA: GR_DISPLAY TYPE REF   TO CL_SALV_DISPLAY_SETTINGS.
      DATA: GR_COLUMNS TYPE REF   TO CL_SALV_COLUMNS_TABLE.
      DATA: GR_COLUMN TYPE REF    TO CL_SALV_COLUMN_TABLE.
      DATA: GR_SORTS TYPE REF     TO CL_SALV_SORTS.
      DATA: GR_AGG TYPE REF       TO CL_SALV_AGGREGATIONS.
      DATA: GR_FILTER TYPE REF    TO CL_SALV_FILTERS.
      DATA: GR_LAYOUT TYPE REF    TO CL_SALV_LAYOUT.
      DATA: GR_PRINT TYPE REF     TO CL_SALV_PRINT.
      DATA: GR_SELE TYPE REF      TO CL_SALV_SELECTIONS.
      DATA: GC_TRUE TYPE SAP_BOOL VALUE 'X'.
      DATA: GR_ITEM TYPE REF      TO  CL_SALV_ITEM.
      DATA: COLUMNNAME TYPE REF TO LVC_FNAME.
    top of list for CCL
      DATA: GR_CONTENT_CCL TYPE REF TO CL_SALV_FORM_ELEMENT.
      DATA: GR_COL TYPE REF TO CL_SALV_COLUMN.
      DATA: LT_SORT TYPE SALV_T_SORT_REF,
            LS_SORT TYPE SALV_S_SORT_REF,
            L_SEQUENCE TYPE SALV_DE_SORT_SEQUENCE,
            T_SORT TYPE REF TO SALV_T_SORT_REF.
      DATA: KEY TYPE SALV_S_LAYOUT_KEY.
      DATA: COLOR TYPE LVC_S_COLO.
      DATA: GR_EVENTS TYPE REF TO CL_SALV_EVENTS_TABLE.
      DATA: GR_SELECTIONS TYPE REF TO CL_SALV_SELECTIONS.
    **--Selection screen
    SELECT-OPTIONS:S_MATNR FOR MARA-MATNR.
    SELECT MATNR WERKS LGORT LABST
             FROM MARD
             INTO CORRESPONDING FIELDS OF TABLE TB_MARA
             WHERE MATNR IN S_MATNR.
    TRY.
          CALL METHOD CL_SALV_TABLE=>FACTORY
            IMPORTING
              R_SALV_TABLE = GR_TABLE
            CHANGING
              T_TABLE      = TB_MARA.
        CATCH CX_SALV_MSG.
      ENDTRY.
      GR_TABLE->SET_SCREEN_STATUS(
                  PFSTATUS = 'SALV_TABLE_STANDARD'
                  REPORT = SY-REPID
                  SET_FUNCTIONS = GR_TABLE->C_FUNCTIONS_ALL ).
    GR_FUNCTIONS = GR_TABLE->GET_FUNCTIONS( ).
      GR_FUNCTIONS->SET_ALL( ABAP_TRUE ).
      GR_DISPLAY = GR_TABLE->GET_DISPLAY_SETTINGS( ).
      GR_SELE = GR_TABLE->GET_SELECTIONS( ).
      GR_SELE->SET_SELECTION_MODE(  ).
      GR_TABLE->SET_TOP_OF_LIST( GR_CONTENT_CCL ).
    *--- To change the column headings
      GR_COLUMNS = GR_TABLE->GET_COLUMNS( ).
      GR_COLUMNS->SET_OPTIMIZE( GC_TRUE ).
      GR_SORTS = GR_TABLE->GET_SORTS(  ).
      TRY.
          GR_COLUMN ?= GR_COLUMNS->GET_COLUMN( 'SEL' )  .
          GR_COLUMN->SET_CELL_TYPE( IF_SALV_C_CELL_TYPE=>CHECKBOX ).
          GR_COLUMN->SET_LONG_TEXT( 'CHECKBOX' ).
        CATCH CX_SALV_NOT_FOUND.
      ENDTRY.
      GR_COLUMN->SET_CELL_TYPE( 6 ).
      GR_COLUMN->SET_SHORT_TEXT( 'Check Box' ).
      GR_COLUMN->SET_LONG_TEXT( 'Check Box' ).
    ******Check box edit
      TRY.
          GR_SORTS->ADD_SORT( COLUMNNAME = 'MATNR' SEQUENCE =
          IF_SALV_C_SORT=>SORT_UP ).
        CATCH CX_SALV_DATA_ERROR
              CX_SALV_NOT_FOUND
              CX_SALV_EXISTING.
      ENDTRY.
      GR_LAYOUT = GR_TABLE->GET_LAYOUT( ).
      KEY-REPORT = SY-REPID.
      GR_LAYOUT->SET_KEY( KEY ).
      GR_LAYOUT->SET_SAVE_RESTRICTION( CL_SALV_LAYOUT=>RESTRICT_NONE ).
      TRY.
          GR_COLUMN ?= GR_COLUMNS->GET_COLUMN( 'MATNR' ).
        CATCH CX_SALV_NOT_FOUND.
      ENDTRY.
      COLOR-COL = '8'.
      COLOR-INT = '0'.
      COLOR-INV = '1'.
      GR_COLUMN->SET_COLOR( COLOR ).
      GR_TABLE->DISPLAY( ).
    Thanks,
    Mahesh.

    Hi,
    You can use the method set_selection_mode to automatically show the checkbox for each row..and use the method get_selected_rows to get the rows selected..
    Check this sample report..
    TYPES: BEGIN OF type_output,
             matnr TYPE matnr,
           END OF type_output.
    DATA:lt_output   TYPE STANDARD TABLE OF type_output,
         lwa_rows    TYPE int4,
         lwa_output  TYPE type_output,
         lt_rows     TYPE salv_t_row.
    * Local declarations.
    DATA: lr_table      TYPE REF TO cl_salv_table,
          lr_selections TYPE REF TO cl_salv_selections.
    DATA: lr_columns    TYPE REF TO cl_salv_columns_table.
    START-OF-SELECTION.
    * Prepare data.
      lwa_output-matnr = 'TEST1'.APPEND lwa_output TO lt_output.
      lwa_output-matnr = 'TEST2'.APPEND lwa_output TO lt_output.
      lwa_output-matnr = 'TEST3'.APPEND lwa_output TO lt_output.
    * Call the factory method
      TRY.
          cl_salv_table=>factory(
            EXPORTING
              list_display = 'X'
            IMPORTING
              r_salv_table = lr_table
            CHANGING
              t_table      = lt_output ).
        CATCH cx_salv_msg.                                  "#EC NO_HANDLER
      ENDTRY.
    * Column selection
      lr_selections = lr_table->get_selections( ).
      lr_selections->set_selection_mode( if_salv_c_selection_mode=>row_column ).
      lr_columns = lr_table->get_columns( ).
      lr_columns->set_optimize( abap_true ).
    * Display
      lr_table->display( ).
    * Get the selected rows.
      lt_rows = lr_selections->get_selected_rows( ).
    * Display the selected rows.
      LOOP AT lt_rows INTO lwa_rows.
        READ TABLE lt_output INTO lwa_output INDEX lwa_rows.
        WRITE: / lwa_output-matnr.
      ENDLOOP.
    Thanks
    Naren

Maybe you are looking for

  • Album Cover art

    I like the idea of being able to browse using cover art but it is only a useful feature if you can get most cover art . There are many albums for which iTunes has album cover art, albums which I own original copies of, for which I can't get album art

  • Selecting and Printing Labels from Database

    I have tried to print address labels from a database in which I chose four lines, one of which (a company name) is often blank because there is no information. This line appears as a blank line on the label. Is there a way to eliminate this blank lin

  • Find a character in a string

    How will you locate a specific character inside a string? Thanks in advance!!!

  • Forward string value to next JSP page

    Hi there ! I display several String results from query. Now, user should click the String and it forwards user to next page(page2.jsp). In the page2.jsp , I need to request.getParameter("end_time"); Below is code :- Please help ASAP guys ! while (out

  • [MX2004] send mediante php pero que no muestre una pagina web

    quiero enviar una varibable por php pero al hacerlo se me abre la venta del navegador web enviar.php <?php //echo $HTTP_POST_VARS['cadena']; $destino="fichero.dat"; $abrir = fopen($destino,"w"); $cadena="esto es una prueba".$HTTP_POST_VARS['cadena'];