Thanks to everyone but looks like I'll be changing forums

I just wanted to say thank you to everyone here. The information on here has been valuable and will be using it once I start again. My rebuilding journey has taken a dramatic turn and now i have to go down the BK path. Sometimes we need to take a few steps back to get going forward again. It's a small setback in an otherwise long process.

I filed in 2007 and quite frankly, I cannot wait until 2017 to see this completely removed from all my CR's. Ten year's is SOOOOOOO much longer than the unbearable seven for most derogs. Think about it, it's almost 50% longer, and not counting your childhood or teenage year's, stays with you for about 1/5th of your entire adulthood. Even to this day, being 8 year's old, it still affects my ability to get some CC's and rent in some places. It's like a very dark cloud that's always there. No matter what you apply for, questions are always asked, and in many cases, regardless of your score, you'll be declined. CH 7 should not be taken lightly, and used in cases where there's absolutely no other way out of debt. In my case, I was involved in a business with a really bad partner and was on the hook for over 2 million in personal guarantees. I had no way of ever paying this debt once we split and the company was dissolved. Not trying to talk you out of it, but letting you know this course of action will follow you for a long time in one way or another. Best of luck.

Similar Messages

  • Frustration! I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen???

    I live in Japan,
    I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen??

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • Hi i start downloading the last itunes version but it get cut so now i am doing it again but looks like is installed all ready

    hi i start downloading the last itunes version but it get cut so now i am doing it again but looks like is installed all ready

    #Before Uninstall take backup of your Firefox Profile.
    #*http://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    #*http://kb.mozillazine.org/Profile_backup
    #After Firefox File > Quit
    #Uninstall and Reinstall your Firefox
    #Restore your Profile.
    #*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox <br>
    _______________________________________________________________________________ <br>
    *Clean Reinstall
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • My ipod is not starting its turn on but looks like sync. and does not stop

    My ipod is not starting its turn on but looks like sync. and does not stop and screen is black

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Looks good in firefox browser but looks like hell on upload to my server

    I created a webpage, used a simple template of 'header' 'content' 'footer', inserted an image into the header, inserted a table then image then table in the content, and nothing in the footer. it looks great when previewed with Firefox or Explorer. But when I upload it to my server it looks like hell. The image in the header is off to the side, my content is overlaying the header. the left side of the template is dark gray.  What could have possibly happened?
    Thank you in advance for any help you can give.
    here is my code.
    <!doctype html>
    <html>
    <head>
    <meta charset="utf-8">
    <title>main page</title>
    <link href="_css/one page with header.css" rel="stylesheet" type="text/css">
    <style type="text/css">
    body {
        margin-left: 300px;
        margin-right: 300px;
    </style>
    <script type="text/javascript">
    function MM_preloadImages() { //v3.0
      var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
        var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
        if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
    function MM_swapImgRestore() { //v3.0
      var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
    function MM_findObj(n, d) { //v4.01
      var p,i,x;  if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
        d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
      if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
      for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
      if(!x && d.getElementById) x=d.getElementById(n); return x;
    function MM_swapImage() { //v3.0
      var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
       if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
    </script>
    </head>
    <body onLoad="MM_preloadImages('_images/Kindle overlay button.jpg','_images/iBook overlay button.jpg','_images/Nook overlay button.jpg','_images/Kobo overlay button.jpg')">
    <div class="container">
      <div class="header">
        <!-- end .header -->
      <img src="_images/How To Go Back To Work-blue- banner.jpg" alt="banner" width="1000" height="200" align="middle">  </div>
      <div class="content">
        <div align="center">
          <table width="778" height="60" border="1" cellpadding="1">
            <tr>
              <td height="51"><div align="center"><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Kindle button','','_images/Kindle overlay button.jpg',1)"><img src="_images/Kindle button.jpg" alt="Kindle Buy Button" width="100" height="40" id="Kindle button"></a></div></td>
              <td><div align="center"><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('iBook','','_images/iBook overlay button.jpg',1)"><img src="_images/iBook button.jpg" alt="iBook Buy Button" width="100" height="40" id="iBook"></a></div></td>
              <td><div align="center"><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Nook button','','_images/Nook overlay button.jpg',1)"><img src="_images/Nook button.jpg" alt="Nook Buy Button" width="100" height="40" id="Nook button"></a></div></td>
              <td><div align="center"><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Kobo button','','_images/Kobo overlay button.jpg',1)"><img src="_images/Kobo button.jpg" alt="Kobo Buy Button" width="100" height="40" id="Kobo button"></a></div></td>
            </tr>
          </table>
        </div>
        <p><img src="_images/Index page 4.jpg" alt="Index image" width="1000" height="2532" align="bottom"></p>
          <div align="center">
            <table width="778"  height="60" border="1" cellpadding="1">
              <tr>
                <td><div align="center"><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Kindle button','','_images/Kindle overlay button.jpg',1)"><img src="_images/Kindle button.jpg" alt="Kindle Buy Button" width="100" height="40" id="Kindle button2" align="absmiddle"></a></div></td>
                <td><div align="center"><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('iBook button','','_images/iBook overlay button.jpg',1)"><img src="_images/iBook button.jpg" alt="iBook Buy Button" width="100" height="40" id="iBook button"></a></div></td>
                <td><div align="center"><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Nook button','','_images/Nook overlay button.jpg',1)"><img src="_images/Nook button.jpg" alt="Nook Buy Button" width="100" height="40" id="Nook button2"></a></div></td>
                <td><div align="center"><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Kobo button','','_images/Kobo overlay button.jpg',1)"><img src="_images/Kobo button.jpg" alt="Kobo Buy Button" width="100" height="40" id="Kobo button2"></a></div></td>
              </tr>
            </table>
          </div>
        <blockquote>
          <blockquote>
            <blockquote>
              <blockquote>
                <p> </p>
              </blockquote>
            </blockquote>
          </blockquote>
        </blockquote>
      </div>
      <div class="footer">
        <p> </p>
        <!-- end .footer --></div>
    <!-- end .container --></div>
    </body>
    </html>

    You may have forgotten to upload your .css file.
    Without a link to the actual page, it's hard to say what else might be wrong.
    If you uploaded your css, one thing to look at is the case structure of your files. Servers are CaSe SenSiTiVe, your local OS is not, so a link like " _css/one page with header.css" will work with a file named "One Page With Header.css" locally, however, online the link would break since the two names (one all lower case the other with "camel case" structure) would be considered different files by the server.
    Be careful with file names for that reason. They really should be simple lowercase alpha numerics with no spaces (use underscores or hyphens instead).

  • DVD burnt in BEST QUALITY but looks like a VCD when played on DVD player

    Made a 115 mins movie in Final Cut Pro, exported it to Quicktime and made a project in iDVD 6. If I check the quality of the movie before I burn it, it is all right, I select BEST QUALITY on iDVD setiings before I burn it but, then when it's ready, I check it on the DVD player and it is in very low quality, like if it was a VCD, it shows little squares on the images. Not the whole video but several times during playback. I've burnt dozens of videos like this one before and it never gave me taht problem but the last 3 videos I've burnt it shows it.
    HELP ME PLEEEEEEASE!!!!!

    I select BEST QUALITY on iDVD setiings before I burn it but, then when it's ready, I check it on the DVD player and it is in very low quality, like if it was a VCD, it shows little squares on the images.
    Set it to Best Performance if you are concerned about the highest possible visual quality w/in iDVD6 (keep in mind you cannot exceed 1 hr. in this particular mode).
    Also remember to burn from the disc image at 4x or slower using Roxio Toast or apple's Disc Utilities. I recommend using Verbatim or Maxell DVD-R for best results.
    Good luck and hope this is Helpful.

  • Files don't actually Compress but look like Archive.zip

    New issue: I never had trouble archiving/compressing files before.
    I choose the files to compress, it goes through the motions, even gives me an Archive.zip file, but that file stays the same size as the combined files. Doesn't actually compress anything.
    Can't find this issue answered elsewhere!

    What kind of files are you attempting to zip?
    Some files, such as photos, music and video are actually compressed already. In fact something if you attempt to compress the files again. they actually get larger.
    Allan

  • Made the switch to an mac from a PC.  I imported the files but looks like my folders are protected and i cannot access them.  Any thoughts on how to remove permissions?

    All the pictures and files that were migrated are in folders that I do not have access to on the mac now.  They imported fine, but now I cannot access them,  Any thoughts on how to get them?

    What you can do is this:
    Open the Terminal application in the Utilities folder.  At the command line prompt and paste the following line:
    sudo chown -R `id -un`:`id -gn`
    Put a space after "-gn`" and drag the folder that has all the imported folders into the Terminal window.
    Press RETURN.  You will be prompted to enter your admin password which will not be echoed.
    This should give all the files and folders the same permissions as your Home folder so you can access the data. If the folders with your files are not contained in a single folder, then create a new folder on your Desktop (COMMAND-SHIFT-N) and drag all the imported folders into this new folder.

  • Cursor bug (cursor work but looks like frozen beach ball)

    I'm running 10.6.2 on a 3ghz core duo imac. I have two accounts on the machine and it's only happening on one side. The cursor will not change back to a normal arrow until i launch an application like firefox. I repaired the disc and permissions. didn't make a difference. Any clue what this could be? should i delete some prefs/plists?

    Is this bug system-wide or do you only notice it in the Finder?

  • 6 rental homes, each with a color code, need to create reservation calendar, but looks like iCal can't do it

    Why isn't there a way to upload a pic of my current system. I am trying to use an online program for what I am doing and can't seem to find one that lets me put vacations of different durations at 6 different houses, using 6 different colors... maybe YOU know?

    Why isn't there a way to upload a pic of my current system. I am trying to use an online program for what I am doing and can't seem to find one that lets me put vacations of different durations at 6 different houses, using 6 different colors... maybe YOU know?

  • Hey! it looks like cloning of humans is possible!

    in the "Database & OS Platforms" forum, we have a nuisance called Manu Jain.
    - this guy keeps on asking basic questions
    - this guy never searches
    - when he gets an answer, he asks more basis questions
    - he gives 10 points to the last poster to "allow him" to create new topics.
    - he likes to be spoonfed.
    - and if this is not enough, he created a new user ID and switched them constantly:
    Manu Jain has a clone! his new name is "Raj"
    Check how Manu and Raj keep on changing their ID but looks like it is the same person...
    add image in sap
    and, this "Raj" guy acts exactly the same... like assigning 10 points to the last poster...

    Hi Amit,
    As a programmer, you will know that you cannot always think of all eventualities which a program (on it's own, out there in the wild) might encounter.
    I am not the guru on this, but looked into it once before when I noticed it...
    My understanding is that while the merger of S-accounts was happening, it can also happen that a "merged from" account logs back into the SMP and branches to SDN (which creates the SDN account again). If this happens while the merger is happening, then the posts total took a knock. I suspect that the merger uses a "post x of y posts" logic to convert them all, and when "y" changes then "z" happens...
    To my knowledge, there are less than 5 but not 1 of these "special" users at SDN and they date back to a time when the account merger requests first appeared. I have not seen any since, so I suspect that the original problem has been solved using a guestification call-back...
    So, yes... you can think of Subhash as a hero, in the pioneer sense of the word.
    Cheers,
    Julius

  • I've recently started to use Numbers but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use. Looks like I have the same situation on my iphone. Any guidance? Thanks.

    I've recently started to use Numbers on my macbook pro but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use.
    Looks like I have the same situation on my iphone.
    The only option I'm being given is to create an lCloud account.
    Any guidance? Thanks.

    The last thing you want is a second iCloud account. Try logging out and back in in System Preferences. If that doesn't work, I'd get AppleCare on the line.
    Jerry

  • Poor quality motion tween with png image, tried "Trace Bitmap", but then it looks like a newspaper

    Greetings all,
    I've been a software developer for many years, but am not very savy in the design elements.  So, much of what I'm going to say will probably sound "newbie", so please forgive me in advance.
    So, I'm trying to get a transparent image to fly in from the side.  So, I *thought* I was doing the correct thing by moving the "symbol" off of the visible portion of the stage, and creating a motion tween to move it onto the stage.  The motion works, but the quality of the image in general (and the text in specific) looks pixelated.
    Thus, I did a little bit of snooping, and everyone said that you should start with a bitmap.  So I saved the image from Photoshop into .bmp format, and was able to set the properties to "allow smoothing" and with lossless compression.  So far, so good.  Now, as I expected, the transparency is no longer there... 
    So here's the question:  how can I make this image retain its quality, still have transparency, and a motion tween?
    It seems like this is some set of characteristics that don't play well together, even though I see this type of thing online ALL the time.
    I tried "Trace Bitmap" to convert to a raster image, and tried to follow some suggestions online, but when I do "Trace Bitmap", it ends up looking like it has a bunch of grayish dots on the image... definitely NOT what I was expecting.
    Thanks for your help!
    JPB

    Go back to using the png, and set the smoothing allowance. That should take care of the quality.  In Flash, a "bitmap" will often refer to any type of image element... .bmp's are probably dinosaurs (as in extinct) where Flash usage is concerned.

  • Podcast app bug on ipad (w retina): for some reason it freezes, looks like it is trying to refresh but has stopped downloading all podcasts

    Hi Everyone,
    I'm using the latest ipad with retina display and love using the podcast app. Since last week the podcast app is acting strangely. It has stopped auto downloading the latest podcasts. It's not just one podcast but all of the ones I subscribe to. When I open the app it looks like it is refreshing with that little circle that keeps spinning but nothing happens - in fact the app freezes and it is hard to close. It freezes also when I try to delete podcasts. It frequently crashes too. I don't know what to do to help it work again. Any suggestions?

    I haven't heard back regarding the problem I posted. Has anyone else had this problem? Anyone have a solution?
    Thanks
    Aug 28, 2013 9:51 PM
    Hi Everyone,
    I'm using the latest ipad with retina display and love using the podcast app. Since last week the podcast app is acting strangely. It has stopped auto downloading the latest podcasts. It's not just one podcast but all of the ones I subscribe to. When I open the app it looks like it is refreshing with that little circle that keeps spinning but nothing happens - in fact the app freezes and it is hard to close. It freezes also when I try to delete podcasts. It frequently crashes too. I don't know what to do to help it work again. Any suggestions?
    iPad 2, Windows XP, I have the newest ipad with 128 GB 

  • Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all??  Looks like I can set it for one but not others.  All, one, or nothing

    Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all??  Looks like I can set it for one but not others.  All, one, or nothing

    Hey Eric,
    Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
    Again, thanks for trying, it is appreciated.

Maybe you are looking for

  • Bug In Builder LV2012 - VI reported BAD when building - Need a workaround ASAP

    Hello, I currently have a problem with building and application. The Builder report a VI to be in BAD state when saving the VI near the end of the building process. I got this problem a couple of time, and to resolve it I need to clear the Compiled O

  • SSLEXT With Struts 1.1. and Tiles

    Struts 1.1 (with tiles) Java 1.5 Tomcat 5.5.9 MySQL 5.0 I have downloaded the sslext.jar from sourcefourge, in an attempt to implement transparent switching betweek http and https action mappings. I have followed the implementation guide here http://

  • Itunes won't play song even though computer is authorized

    Song purchased on itunes won't play  even though computer is authorized, any ideas of how to fix it?

  • IGES or VDA-FS import/export from DIADEM to/from CATIA

    We need to import/export data in either IGES or VDA-FS file format with DIADEM to/from CATIA. The data is a three dimensional array of coordinates representing the contour of a automotive seat. Does anyone know where to get or have such a file filter

  • Sybase connectivity issue

    Hi, we have installed MII 14.0 with latest version of sybase DB has backend. While Configuring data server connection with Sybase database its showing stopped status. So please let me know where i did wrong. Below are the parameters details which i h