That black blink between an animation and the menu it's leading into

Is there any way in Encore to make the transition from a timeline to a menu seamless? It just looks kind of cheap to have a slick video into and then BA-BWINK a quick black screen before the main menu pops uf the
FYI I'm using Encore CS5 (and the rest of the Master Suite, in case that opens up any options).

How short that blip is varies with the player. Scripting is required to do the best job (and Encore does not allow scripting).
The best way to avoid this is to make the intro video part of the motion background and use a loop point so it doesn't repeat.

Similar Messages

Bmpanel creates a black gap between my wallpaper and the panel

I am running Xcompmgr (as you can see by the window shadows) and PekWM. bmpanel is compiled with compositing support (0.9.x, couldn't get bmpanel2 to compile). But whenever I start bmpanel, my wallpaper moves up to make room and leaves a black space. This does not happen with simpler bmpanel themes that don't have pieces extending off the panel.
As you can see in the screenshot, I'm looking at a screenshot of someone else who has managed to get it working correctly. No clue how, though. The screenshot also contains the CLI feedback.
I'm setting the wallpaper with feh --bg-scale, do I need to use something else? Running feh again after bmpanel doesn't change anything.
Thanks!

Ranguvar wrote:
http://h.imagehost.org/t/0515/2009-08-0 … _scrot.jpg
I am running Xcompmgr (as you can see by the window shadows) and PekWM. bmpanel is compiled with compositing support (0.9.x, couldn't get bmpanel2 to compile). But whenever I start bmpanel, my wallpaper moves up to make room and leaves a black space. This does not happen with simpler bmpanel themes that don't have pieces extending off the panel.
As you can see in the screenshot, I'm looking at a screenshot of someone else who has managed to get it working correctly. No clue how, though. The screenshot also contains the CLI feedback.
I'm setting the wallpaper with feh --bg-scale, do I need to use something else? Running feh again after bmpanel doesn't change anything.
Thanks!
I hadte same issue, i wanted that bmpanel theme, and a trayer, but i couldnt use both, so i stoped using bmpanel, im hoping that they will be able to use compozing and have a trayer at the same time, then i will start using it again

I just purchased Metallica's Kill Em All and the download onto my phone indicated that there is a "digital booklet" and the next time I signed into the iTunes store, it would download, but alas, it hasn't. How does one go about getting it?

Digital Booklet - Kill Em All (DMD Album +PDF) Why isn't this downloading to my iTunes or my iPhone...?

The very similar situation with mine:
https://discussions.apple.com/thread/3492726
I can't find any solution. I don't even remember when I changed my apple ID! So does that means I cant recovered my purchased apps from my " old" account? I am totally innocent, for I did not intend to "Change" my account name

Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone)

Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone) so that person can find their iPad coz the police would of taken mine if I did not show proof of purchase

You are not communicating with Apple by posting here. Everyone here is just a fellow user and cannot fix anything.
The Find My iPad service may have indeed been accurate to the limits of the technology. Unless the iPad was a 3G unit, location is determined based on the nearest WiFi router which in your case could just happened to have been yours. The police may be the ones who need to "fix" their understanding of how the technology works and its limitations.
If you want to provide feedback to Apple on the matter, you can do so via their feedback pages:
http://www.apple.com/feedback/ipad.html
but to be of any good you'll have to provide them with more precise details.
Regards.

What is the difference between the green text bubble that reads "sent as text message" and the blue text bubble reporting "delivered?" Is the green text bubble not delivered?

what is the difference between the green text bubble that reads "sent as text message" and the blue text bubble reporting "delivered?" Is the green text bubble not delivered?

iMessages are sent using Apple servers, using either WiFi or Cellular data. They can only be sent to/from iDevices or Macs that have the Messages app. SMS messages use the cellular network. Both methods can deliver the message to the recipient.
http://www.apple.com/ca/ios/messages/

My firefox is black but shows a few ads and the menu bar is empty

I added a monitor and am running two monitors. Since I installed the monitor my firefox (which I don't think I can live without) is totally black with the exception of a random ad and the menu bars are present but blank. Can you help me?
Thanks
Jerry Rockwell

Hi,
( I search for iChat questions when I have finished in the iChat Forum)
So the menu bar reads iChat, File, Edit, View, Buddies, Video, Window and Help
There is no Buddy List open.
There is no other window for iChat open.
In the iChat Menu you only have access to Status.
Is an item ticked in the list ?
Is this a green (Available item) or Red ( an Away one) ?
Can you access the Accounts option ? (Sitll in the iChat Menu)
Is anything in here ticked ?
In the Window menu any Logged in account should appear in the list (Between the Next Chat and File Transfer items)
It would be useful to know which version of iChat this is.
If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option (you can use it in earlier OS versions if you want)
Type in:-
~/Library/Preferences
Find the file called com.apple.ichat.plist
Drag it to the Trash and Restart iChat.
This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
9:23 PM Saturday; August 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Ipod nano 4th generation switches between the Apple logo and the menu

I have a 4th generation 8 g iPod Nano that probably has about 1 hour of use since my wife won it in a raffle over a year ago. When I went to recharge it yesterday, the only thing that happens is that the display, when connected to the computer, flips back and forth between the Apple logo and the menu screen. Whenever either one of them appears, it will disappear in a few seconds, then repeat the sequence. I have done a reset and restore,and installed the latest software version but the same thing happens over and over again. If the iPod is detached from the computer, ie, its power source, NOTHING happens on the display. It black and you can't get it to show anything. My theory was that the battery needed to be replaced even though it wasn't used much in the year since she got it. In fact. the absence of use and recharging it and discharging it may have lead to this problem in the first place. However, my one issue with that theory is that, when connected to a power source, like the computer, I would think I could get it to function normally, which I can't. I was able to get to the "service menu" which won't disappear when I move about different choices, as long as its connected to the computer. Again I can get nothing if its not connected to a power source.. does anyone think that this problem could be solved by replacing the battery or does it seem like that is only part of the problem? Thanks for any help and suggestions you may have to offer.
Geoff

Despite the Nano only being used for an hour or so, the battery needed to be replaced= problem solved!!

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

What's the difference between Java SDK and the Enterprise Edition?

What's the difference between Java SDK and the Enterprise Edition? Are they both free?

both r free but they are used in diffrent applications. sdk are used for simple apps that run on your computer while j2e (enterprise edition) are ment for large distributed computer systems that include servers and such. if you don't know the diffrence you probably wont need the the j2e, only the sdk.

Customise table inconsistency between ABAP Dictionary and the databas

Hi all,
I have encountered a problem where by, I was not able to activate a table due to inconsistency between ABAP Dictionary and the database.
After I run the SE14--> Check Database object. It has show that there is a missing Unique Index(Primary Index) at the Database Level, but at ABAP Dictionary it is there.
I have try to recreate the primary index at the Database level, but failed. Because one of the primary key field is been dropped from this table.
So now, may I know how can I still make this table Active again?
Is it save to folllow the following solution that I found on internet?
Syntax error in SDCC, table inconsistency between ABAP Dictionary and the database, transport error 8 during the generation of ABAP Dictionary. When you call Transaction SDCC, a termination occurs due to a putative syntax error because a table is not known or active. When you check this with the ABAP dictionary (SE11), you notice, that the table is active or inactive, however it is not possible to activate it. The activation might terminate with the error message 'Inconsistency between ABAP Dictionary and database'. A check of the affected object also delivers this error.
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

I managed to solved this by
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

Is there a way to Move files to the iCloud thus freeing up disk space on my Mac? Or does iCloud only sync (replicate) files between my Mac and the cloud?

Is there a way to Move files to the iCloud thus freeing up disk space on my Mac? Or does iCloud only sync (replicate) files between my Mac and the cloud? I want to free up disk space on my Mac and assumed that the icloud would be a good way to do this, but having 'moved' 70Gb of files to the iCloud drive (I've upgraded to 200Gb storage) my Mac is still nearly full and I've realised that it seems to just Sync files just like dropbox.

So, the big question is did the Apple guys confirm that this is how the new iCloud drive should be working? I'm guessing, from your response, that this is indeed the case. Are they going to fix this anytime soon? I thought that this was a new function of the iCloud drive in Yosemite.
I just want an online storage facility to back up my photo & music collections. I did look at Dropbox as they have a good deal going with their Dropbox Pro, however this is still just a sync service where the Master files reside on your local disk drive - although I have read that there may be a way to work around this. Still not ideal.

My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??

My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

Relation between statistical document and the real document

How do I get relation between statistical document and the real document.
Actually I want to reverse the posted real document and then convert statistical document into real document.
Problem is that I have the Main/Sub transaction of statistical document but not of real document. So how do i link both of them.

Hello,
LFA1 is just a master data table.
To get the number of open items you refer table BSIK
To get the number of cleared items, you refer table BSAK
These two tables gives you the number of line items posted on vendors.
Hope this is informative.
Regards,
Ravi

Problem: Hotsync error message "The connection between your device and the desktop could not be establisthed."

When I Hotsync Bluetooth connection is successful, then in step 2, "Connecting with the desktop" Hotsync errors out with message "The connection between your device and the desktop could not be establisthed. Please check your setup and try again."
Bluetooth configuration inticates Bluetooth serial port COM Port is set to COM3
Hotsync setup: when I click "Local" tab I get error message "The selected port, COM5, is not available at this time. HotSync Manager will open the port when it becomes available."
Hotsync setup > "Local" tab > Serial Port dropdown shows only COM4. I cannot change it to anything else.
Note: I can send files to PC using Bluetooth just fine; error only occurs when I Hotsync using Bluetooth connection.
Tried rebooting both laptop and Palm TX. Still can't Hotsync.
Operating system: Windows XP Pro
Post relates to: Palm TX

You are not the only one having this problem. I have REPEATEDLY tried to bluetooth sync with my new toshiba windows 7
Palm 6.2.2 to no avail. I have tried every bluetooth device they suggest and every "fix" or "solution" that has been offered here and in on line chat with a Palm tech. No dice! I even took my computer and all components to a tech. He worked on it for 5 hours. Every once in a while for no apparent reason it will magically sync, but never consistently. Using 32bit on my husband's computer with Vista, and the docking cradle still works so I have my data. A few others have apparently had success with this problem but I think it is an accident that it works for them when it does. Otherwise it would work for everyone. We have read everything we can find and spent literally hours and hours and hours.
I am now in the process of trying to import/export to Outlook and plan to upgrade to another device like iPhone or blackberry that will sync data with Outlook. My Palm TX also has not been able to successfully sync with that although, as I said earlier, it syncs with Palm Desktop. Good luck with your's.

Table having the link between Clearing document and the Invoice document

pls can someone tell me the table that having the relationship between clearing document and the Invoice document.
Thanx .

Hi,
You can try with the following tables: BSE_CLR, BSEG, BSAD, BSAK.
Regards,
Svetlin

That black blink between an animation and the menu it's leading into

Similar Messages

Maybe you are looking for