That fuzzy type thing again
I am using the same phrase on every frame, but as the show
goes on, the type suddenly gets fuzzy. Even if I retype it in
place. Even if i copy, paste-in-place from a good one. All this
type is on even coordinates. Static type, anti-alias off (the
sharper way), 9 points, verdana, not device fonts. Flash 7 OSX
This has bugged me for 2 years.
I got a temporary solution in "break apart", but is that the
proper routine?
Similar Messages
-
That Launch Services thing again?
OK folks. Please help if you know....all of a sudden my textedit won't open an RTF document or txt document when I double click on it. If I go "Open With" (right click say), then no problem.
I've read all the forums so:
1) I've copy/pasted various scripts (involving kill lsregister things) to use in the Terminal...reboot
2) I've used Onyx and Yasu to reset the Launch Services database....reboot
3) I've trashed the LaunchServices caches in the Library/Caches plus the LaunchServices plists...reboot
Each time, the issue is fixed. Then after some time (say half an hour) I retry to open an rtf and bingo, tries to open but nothing happens. Repeat any of 1 to 3 above, temp fix, then....
Any ideas any ideas? (Save complete reinstall????)
Message was edited by: Chris Marshall3The reason why is that the cache files when they are deleted by a program like Onyx are being written to at exactly the same moment they are being deleted. This results in left over corrupt files which rebuild themselves as corrupt files in an endless loop every other reboot. One thing that may help is to remove issues which cause the disk to be too full*:
http://www.macmaps.com/diskfull.html
- * Links to my pages may give me compensation. -
For the new airport extreme what type of cable do I need to connect to my cable modem. Is Cat5 OK or will that bottle neck things?
Assuming that your cable modem has Gigabit Ethernet ports (possible, but it probably does not) Cat 5e or Cct 6 would do the job that you need.
If the cable modem is using a 10/100 Mbps port, then Cat5 will be OK. -
Is there any way that I can get any type of word document so I can type things?
I sometimes need to type things on my Ipad like resumes and such and cannot seem to find anything. I know that my simple notes will not work.
Pages is the Apple word processor for iPad. there are a number of third party Office suites - I use Documents To Go; QuickOffice and Office(squared) also sell well. None of these have all the same functionality of a full computer Word Processsing program, but cover most basic needs.
-
I still am having trouble with fuzzy type SOMETIMES after 3
YEARS of screwing around with that kind of thing. Generally I can
fix it by "break apart" or next frame F7 and type the same thing
all over again, but dont always want to do that. copy/paste is no
fix either. These are buttons or type that is good on the first
frame, but then inexplicably the next frame is different. I have
always put my type on whole number coordinates. I use static text.
In case you want to see,
http://www.stevez.biz/foto_fun/salvage/qc.html
page 3 or 4 this starts to happen with "next" & "back"
BUTTONS this time.
Makes me afraid to try something new or even use words!
Thanks anyone
Flash 7 mac osx.4.10device fonts are 'standard' fonts that are available in most
browsers, this way the font doesn't have to be brought with, taking
up space in the file. so I would say to use a different font that
you like (non-device), it won't take up to much space, and since
you fields are static you don't even need to 'embed' and the font
will be rendered upon publishing. using 'anti-alias for
readability' the font should look sharp all through the dock.
The problem probably has something to do with the internal
font rendering scripts, and I've heard of some other problems with
this before. -
Hi, I am using Dreamweaver MX to create webpages. I have a
user who is complaining that the type is fuzzy. The user is using a
screen resolution of 800 x 600. We have looked at webpages where
they say the type is sharp and I think its the same as what my
pages look like.
Can anyone help me with this problem?
Here is a sample please give me your feedback --
http://69.15.119.2/temp.html
TroyIn the beginning, it can look fuzzy. The fonts are also a
zillion times
better looking in my estimation. But it did take a bit of
getting used to.
Another thing is that Clear Type that's not adjusted right is
horrible. MS
makes an online Clear Type Tuner:
http://www.microsoft.com/typography/ClearType/tuner/Step1.aspx
And also a PowerToy you can download and use:
http://www.microsoft.com/typography/ClearTypePowerToy.mspx
It can make a big difference!
MD
gareth wrote:
> Strange, on all the systems i`ve had complaints about,
they`ve used
> LCD's and the anti aliasing on the font actually made if
look fuzzy.
> Turning it off produced much sharper text. -
Large file size and fuzzy type
I'm new at using FCE2 and composed my first short 4 minute video. It includes a still image, a PSD layered file which I discovered was quite handy, a few clips and type using the type generator. I exported it to QuickTime movie. Three observations: I was floored by the nearly 1GB size, fuzzy type, and the file on the hard drive says it's a FCE movie inclusive of the little FCE icon by the file name. I was expecting to see a QuickTime icon with file name and the type of file is a QuickTime movie. Is all this normal? I'm very disappointed in the fuzzy type. Oh, also, the still image became blurry. Why?? Just so you know, the still image was a special file 640x480 with a pixel aspect ratio of D4/D16 Anamorphic
I saved the project under a new name and redid it taking out the Photoshop image, removing it from the bin also, and the new movie exported even larger, over a gig in size. Huh??Thanks for the reply Tom. After I posted the first time I went to the Finder, Get Info, and I saw that I could change the 'Opens with' to QuickTime and therefore it became a QuickTime file. About that Anamorphic business I read a 'how to' on dealing with images before bringing them into video. The tip says in the 'New' file dialogue box to choose 640x480 size and in the pull down menu at the bottom where you can choose the 'Pixel Aspect Ratio' it was suggest to use that Anamorphic setting. I did it but it certainly didn't look right but I went with it.
Again after I posted I looked at the Format of one of the clips and saw the size to be 720x480, Compressor is DV/DVCPRO-NTSC, Pixel Aspect is NTSC-CCIR 601, Anamorphic field is blank. I'm running Photoshop CS2. So I went back there and created a new blank file to use a template for dealing with stills but this time I used the Preset pull down menu and chose NTSC DV 720x480 with guides and the Pixel Aspect Ratio automatically loaded D1/DV NTSC (0.9), clicked Ok and viola, the blank file looks exactly like the Canvas in FCE. I haven't played with a still with this new setting but I will try it on the little project I'm working on.
As for viewing it, I am looking at it on my Mac flat screen. I went into QuickTime Preferences and checked the box for high quality, thank you. Thanks for reassuring me on the file size.
I also don't know what "D4/D16 Anamorphic" means.
I don't understand the fuzzy type. I'm aware these are 72 ppi files and video is not resolution dependent but rather pixel dependent. Computer monitors display at 72 ppi, televisions are higher. I have yet to complete the process of burning a DVD and playing it back on a TV. Maybe that's where I'll see the type showing up sharper.
At any rate, just dealing with this itty bitty project tells me I have a lot to learn about video, never mind learning about how to use FCE as well. -
I made a button and put a simple bevel filter on it.
When I added type to the button the text bleeds into the
filter. How can I stop/fix this?Thanks for the reply Tom. After I posted the first time I went to the Finder, Get Info, and I saw that I could change the 'Opens with' to QuickTime and therefore it became a QuickTime file. About that Anamorphic business I read a 'how to' on dealing with images before bringing them into video. The tip says in the 'New' file dialogue box to choose 640x480 size and in the pull down menu at the bottom where you can choose the 'Pixel Aspect Ratio' it was suggest to use that Anamorphic setting. I did it but it certainly didn't look right but I went with it.
Again after I posted I looked at the Format of one of the clips and saw the size to be 720x480, Compressor is DV/DVCPRO-NTSC, Pixel Aspect is NTSC-CCIR 601, Anamorphic field is blank. I'm running Photoshop CS2. So I went back there and created a new blank file to use a template for dealing with stills but this time I used the Preset pull down menu and chose NTSC DV 720x480 with guides and the Pixel Aspect Ratio automatically loaded D1/DV NTSC (0.9), clicked Ok and viola, the blank file looks exactly like the Canvas in FCE. I haven't played with a still with this new setting but I will try it on the little project I'm working on.
As for viewing it, I am looking at it on my Mac flat screen. I went into QuickTime Preferences and checked the box for high quality, thank you. Thanks for reassuring me on the file size.
I also don't know what "D4/D16 Anamorphic" means.
I don't understand the fuzzy type. I'm aware these are 72 ppi files and video is not resolution dependent but rather pixel dependent. Computer monitors display at 72 ppi, televisions are higher. I have yet to complete the process of burning a DVD and playing it back on a TV. Maybe that's where I'll see the type showing up sharper.
At any rate, just dealing with this itty bitty project tells me I have a lot to learn about video, never mind learning about how to use FCE as well. -
Is there a way to have the use of what we used to call "Macros" which would be a key you could hit where you have installed a word, phrase, etc that you type repeatedly? By this I mean if, while on line, you repeatedly type out the phrase "Thank you very much for your attention to this matter"....you could hit a key (like maybe F5 or something similar) that would automatically type this phrase out so you don't have to type it over and over and over again.
You can also look at Clippings.
*Clippings: https://addons.mozilla.org/firefox/addon/clippings/ -
My Search Window does not remember any names that I type in. What can I do to bring it back like it was?
This just started happening less than a week ago. Before that, everything was fine. I do not know what happened to cause this. What is a "build-in about home page?" I really do not know about all this technical stuff. Is the location bar the same as my search window.....in the middle of the page.....that I use to type things in? I never type ANYTHING in the top of the screen bar that is located on the same line as the "back" and "forward" button. What do I do now?
-
Can I export a sequence without rerendering the entire thing again?
Using the latest FCP..
Im working on a project with some heavy boris effects stuff... SLOW SLOW rendering.. The entire sequence is already rendered.. but when I go to export the sequence as a QT movies.. using the current settings.. it wants to rerender the **** thing.. 4+ hours.. instead of just spitting out a QT built with the ALREADY rendered sequences.. The timeline is 1080i XDCAM. The sequences is only 5 minutes long.. So it should export in a matter of minutes if it didnt want to RERENDER EVERYTHING..
This is killing me right now..
Can I export a sequence without rerendering the entire thing again?Joe
Lets start at the bottom and work back ....
What is your target format? You want to export the sequence but for what purpose? Is it for broadcast delivery, for burning to DVD, for web, or ....?
You note that the timeline is 1080i XDCAM ... well that is a native Long GOP format. When you export it as a single self contained clip then all those GOP structures that make up the different elements of your sequenvce must be broken down and re-conformed into a singole semaless GOP structure that describes the whole. Thats why it is re-rendering.
And GOP's are a hog to decode and encode ... thats why you're seeing such SLOW SLOW rendering.
Suggestion number 1) Set your sequence's Render codec to ProRes 422 ... th erender files will be bigger but they rendering itself will be much faster.
Suggestion number 2) If you are not exporting back to XDCAM media specifically then there is no real reason to export your edit as XDCAM HD. Try exporting as ProRes 422 (as per the render setting) ie choose Export > Quicktime Movie w/ Setting: Apple ProRes 422 (+not Current Settings+)
Suggestion number 3) If you are working on a big and powerful mac like the latest and greatest MacPro's, then in future just set your sequence codec to ProRes 422 and edit the XDCAM files directly in that ProRes 422 timeline, when done then Export > Quicktime Movie w/ Current Settings
Hope thats helpful
Andy -
How the he** do I get rid of that stupid search thing? I know how to search.
How do i get a "clean" download of firefox? I don't want that stupid search thing and it won't close and I don't want Yahoo.
Did you install an extension that made this change?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot. -
I saved a file on my mac on Word, but today when I went to review it, it said the "document could not be found" and then asked if i wished to locate the file myself, but when I went to do so it said the same thing again. How do I find this file?
Let's go out and come in again!
What version of Word on what Mac running what version of OS X?
Did you give the file a name? In what location did Word last save a file - because that is where it is likely to be. -
Every time I try to download Java for Lion (no matter what the source) all I get is a document image labelled "unconfirmed download" and a warning that this type of file may harm my computer. What am I doin wrong?
Donna...
Even from Apple? > Java for OS X Lion Update 1
Restart your Mac before trying to download the file.
Do you have anti virus software installed or a program like LIttle Snitch?
If you are using Safari to download files, go to the Safari menu bar click Safari > Empty Cache
If that doesn't help, back to the menu bar, click Safari > Reset Safari. Select the top 5 boxes then click Reset.
If you still can't download the Java file, go to ~ / Library / Caches / com.apple.Safari
Move the Cache.db file from the com.apple.Safari folder to the Trash and restart your Mac. Try downloading that file again.
If it still won't download without that dialog, go to ~/Library/Safari. Move the Downloads.plist file from the Safari folder to the Trash.
Try again.
~ (Tilde) character represents the Home folder.
For Lion: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library -
I've been fighting fuzzy type for 2 years now on buttons
especially. They are static text, perfectly on even coordinates,
anti alias off (the sharper way). Certainly others must know the
final answer on this by now? Please
Flash 7 Every button is made the same way; sometimes they are
fine, other times not. Today not:
http://www.stevez.biz/foto_fun/fotofun.htm
Why is this typing box so tiny, can only see 2 lines at a
time.Steve Zavodny wrote:
> I've been fighting fuzzy type for 2 years now on buttons
especially. They are
> static text, perfectly on even coordinates, anti alias
off (the sharper way).
> Certainly others must know the final answer on this by
now? Please
> Flash 7 Every button is made the same way; sometimes
they are fine, other
> times not. Today not:
>
>
http://www.stevez.biz/foto_fun/fotofun.htm
>
> Why is this typing box so tiny, can only see 2 lines at
a time.
There is no such option as "anti alias off" in flash when
comes to export.
This is only for authoring time preference of VIEW, not
publish setting.
The buttons are clearly due to uneven coordinates. It does
not matter that
the text is placed on even cords, the button that holds it
has to be too.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>
Maybe you are looking for
-
Caseid 4670247907 worst customer support ever seen
caseid 4670247907 today was 15 day of my camplain log i have been provided with replacenet of defective part 2 times but both them self required replacement. this is the worst service support i have seen
-
Hi, Why isn't episode 5 of Rizzoli&Isles available on iTunes Store yet ? It's usually available the day after it's aired. Ep 5 was aired tuesday 23rd, but is still not possible to watch in iTunes.. Thanks, Rennuss
-
Hi guys, I have report on Service Request Active reporting subject area. Standard table view with one additional column with custom text displayed using CASE...WHEN logic. This works perfectly fine. What I need is to display the values being pulled t
-
Aperture and dual monitor ICC profile problem
I am using an Epson Stylus Pro 3800 and run Aperture 2.1 from a MBP with a Cinema Display 23". I calibrated both displays (the 23" and the MBP display) with my ancient but working ColorVision Spyder, using OptiCal 3.7. I calibrated for a gamma of 2.2
-
IPod Nano - 7th Gen. No response, No Charge, No lights, No Joy
Bought the iPod Nano 3 months ago, and now it won't turn on, I have tried holding every combination of button and have not met success. Help????!!!!