The 1 thing Adobe should have changed to blue but didn't!

The color scheme change from yellow to blue is something probably nobody asked for since, objectively speaking, it doesn't improve anything. However, the ONE UI element that could have benefited from a color change was left as is: the Titler's bounding box.
The fact that a title's bounding box is pure white, and therefore completely disappears from view any time an editor creates a title to be displayed against a white background is, quite frankly, incomprehensibly stupid. Sorry to be blunt, but that's a fact, not an opinion.
If the bounding box were changed to blue (or any color other than pure white or black), then it would stand out an be visible against a pure black, a pure white, or virtually any other background a user might need to place a title on! Unless I'm mistaken, fixing this flaw is a question of changing a single number in the program code, the number in the variable that determines the color of the Titler's bounding box. Adobe, if you're going to give our entire UI a color change, PLEASE have the good sense to change the color of the ONE UI element that could actually benefit from such a change!
Thanks for listening!

Hi Cynthia,
If you did not have Find My iPod enabled, and you do not have iCloud, then you cannot track it. You can report it to the police, you should change your AppleID password, and then all you can do is old fashioned detective work - start with the last place you remember having it, and check every place in between that point and now....
Sorry you lost your iPod - hope you find it!
Cheers,
GB

Similar Messages

Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

Hey, thanks for replying. It is the user who needs to manually submit the page.
Basically our page has a hidden div with various text fields and combo boxes. When the user click on specific links on the page, this div is populated and made visible to the user in server side code.
What happens for all other browsers other than firefox 23 onwards (worked fine in 22) is that after the user clicks on the link, our server side code is executed via a HTTP post. The server then renders the hidden div and sends the additional HTML down to the browser via ASP.NET AJAX.
With Firefox 23, the additional HTML is not rendered on the first postback. Subsequent clicks of the same link execute the same server side code but the additional HTML is rendered on the browser without issue.
We've done a lot of debugging now and the issue is localised to a specific third party supplier's (Infragistics) control. I think Firefox 23 must have changed the way that the viewport or screen bounds are calculated or reflected back to this control as the issue seems to stop when we remove the control's MaintainPositionOnScroll attribute. It might be that the Firefox 23 DOM is not able to provide the screen dimensions accurately when the page is first rendered. I say this as the second postback renders the additional HTML fine.
The control in question is quite an old version so I don't think it's your issue to be honest.
Just so that this might be helpful to other developers using the Infragistics Window Dialog Control, setting MaintainPositionOnScroll to false solved this issue for us.

How do i change the start up page i have changed in tools but returns to the unwanted page at startup

i changed the start up page in tools / options and when i restart Firefox it returns to the unwanted page
i installed bit comet and winxdvd programs i was browsing some other sites at the time so i am not sure if those programs were the problem or not

See http://kb.mozillazine.org/Preferences_not_saved

I have a copy of Adobe 8 pro move it from my old laptop to the new an it said an serial number invalid i talked with someone was refered to life chat, nothing they could do, now im here, i ont thing i should have to purchase new, has anyone had the same i

have a copy of Adobe 8 pro move it from my old laptop to the new an it said an serial number invalid i talked with someone was refered to life chat, nothing they could do, now im here, i ont thing i should have to purchase new, has anyone had the same issues and how did you get it fixed or are you in the same boat.

Hi Edward Guilliver,
As i understand you are facing 'Serial Number Invalid' Issue, I would recommend you to refer these Links for more information:
Link 1: https://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
Link 2: Error "Invalid serial number" | Acrobat 9 | CS4
Please let me know if any of this Link fix your issue.
Regards,
Rahul Tyagi

HT1218 My airport utility no longer works, but I have just changed my router. Is there something I need to do ? The orange light shows up on my airport, rather than the green one it should have. Please help !!!

My airport utility no longer works, but I have just changed my router. Is there something I need to do ? The orange light shows up on my airport, rather than the green one it should have. Please help !!!

**** little info about your equipment.
If you just replaced the router with an Airport Extreme or Express:
disconnect the modem from power, disconnect the new router from power, connect the modem to power and wait till it os fully started up, then connect the new router to power. After a while the amber light will turn to flashing, then after a while it will turn to green. Then with AirportUtility (in Aplications/Utilities) it should be configured with the password.

My wireless Apple keyboard won't connect, it just keeps blinking to pair, but nothing connects. I even tried hooking up another wireless I have and it does the same thing. Should I delete it and set it up again?

My wireless Apple keyboard won't connect, it just keeps blinking to pair, but nothing connects. I even tried hooking up another wireless I have and it does the same thing. Should I delete it and set it up again?

Hey Apple Health,
Welcome to Apple Support Communities! There's an article that helps to resolve issues with wireless keyboards. I'd take a look at it, go through the troubleshooting steps, and see if that resolves the issue for you:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
Best,
David

When i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it

when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help

Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian

How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual.

After installing Windows 7 my desktop Adobe icons have change in appearance. How do I change them back?

After installing Windows 7 my desktop Adobe icons have change in appearance. How do I change them back?

The file icons is one on the change features MS removed from the Explorer options. Supposedly you can do the change with the registry, though I have not figured out that option. If you want to try, backup the registry first and then you might try the instructions at How to Change a File Type Icon in Windows 7 and Vista - The Winhelponline Blog. If the application icon is not correct, try to fix that before the approach above. Good luck and be careful (dealing with the registry can make your computer not work..

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I have changed the DNS number to 8.8.8.8, I have worked on this for 2 days and still can't find a fix, HELP!!

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

My iPhone is stolen. How can I get my address book back from the iCloud? I should have synchronized my iPad address book. However, I loss some recent contacts from iPhone.

My iPhone is stolen. How can I get my address book back from the iCloud? I should have synchronized my iPad address book. However, I loss some recent contacts from iPhone.

I use my iPad to get the address book backed up by iCloud from my iPhone. However, I cannot see the recent new contacts from my iPad. Is there anyway to check the iCloud server to see if my address book backup from my iPhone is still there?

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong

Hi Mark,
I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
Mick

Moving this discussion to the Downloading, Installing, Setting Up forum.
Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased. You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Some of my contacts are not displayed in my contact list, but I know they're in memory because when one of them calls me my phone recognizes the caller. This happened a few days ago, so i must have changed some setting,but I have no idea which one. Help?

Recently some of my contacts are no longer displaying in my contact list, but I know they're in memory because when one of them calls me my phone recognizes the caller. This happened a few days ago, so i must have changed some setting,but I have no idea which one. Can anyone help?

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

HT5621 I have changed my AppleID but I can't get the "system preferrences" to show my new AppleID. What am I doing wrong?

I have changed my AppleID but I can't get the "system preferrences" to show my new AppleID. What am I doing wrong? I am running 10.9.2. I support multiple devices on this icloud account and they all work fine. Its just the mac mini ...

I found a post with the answer. Basically I just logged out of the iCloud. My concern was that I would loose my contacts. But when i logged back in with the correct AppleID -- it was all there.
Thanks!

The 1 thing Adobe should have changed to blue but didn't!

Similar Messages

Maybe you are looking for