The 10.6.5 Update is a pile of

So now im going to reinstal osx snow and stay on update 10.6.4, then i am able to play world of warcaft agin.
On the 10.6.5 Update its total unplay able.
So my question is.
Can i instal and still have all my files as it is now and after that go for the combo updates or do i have to erease all?

There is no provision to rename & save the old system with the Snow Leopard installer. You are thinking of the Archive & Install option provided in Leopard & earlier OS versions, but not with Snow Leopard.
With Snow Leopard you could just run the installer again, & if all goes well it would replace the existing OS with a fresh copy of whatever version the installer contains; however, this will not eliminate any problems other than in the replaced OS files. Bad user preference files, file system corruption, conflicts with third party software, & many other problems that may have caused problems with the latest (or any other reapplied) update will still be there if they were prior to the reinstall.
Moreover, if any file system corruption contributed to the problems, it is likely to get much worse with every install or update unless it is eliminated before applying them. (File system corruption causes files to overwrite parts of each other, become cross-linked, or create other errors that cause ever greater errors, creating a vicious circle.)

Similar Messages

ERROR MESSAGE: The IPOD cannot be updated.

Please help!! Have tried everything can think of including, resetting, retrying, restarting, reinstalling and restoring. ITunes automatically starts downloading when you connect but then only transfers the first 50 or so songs in the library, and then says update complete. When you ask it to then update the IPOD through file menu an error message comes up saying 'The IPOD cannot be updated, the disk could not be read from or written to.' There is no problem with the IPOD, because I have been able to update it via another PC, it just won't update via the laptop even though the ITunes has been set up on the laptop as the ITunes I want to use.
Click wheel Windows XP

To all concerned: There is a new Apple Support Document regarding this error:
-36 or "Disk cannot be read from or written to" error syncing iPod in iTunes
Maybe this helps.
Alexander.

"All of the Playlists Selected for Updating No Longer Exist"

My family has 2 ipod shuffles. After purchasing a Nano recently, I inserted the cd that came with it. Apparently the existing iTunes software was removed and reinstalled. At any rate, the library still shows all the original songs, but when the Nano is plugged in, iTunes immediately gives a prompt stating "Songs on the iPod *** cannot be updated because all of the playlists selected for updating no longer exist." The library is there, the playlists that were there are there, and I can play the songs on my cpu. Is there anything I can do besides completely uninstalling everything and starting over?
iPod Nano Windows XP Pro

This user tip should help you sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

Songs on the iPod cannot be updated beaucse all of the playlists .....

I was trying to update my ipod and my ipod only has 52 songs but my libary has 92 songs. i tried to updated it by left clicking where it said my "RISHI"S IPOD" and clicked update...and this message said "Songs on the iPod "Rishi's iPod" cannot be updated becuase all of the playlists selected for updating no longer exist."
HELP PLEASE WHAT DO I DO!!????

This should sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

The ipod cannot be updated. The disk could not be read from.

The ipod cannot be updated. The disk could not be read from or written to.
This message appears every time I try and update my ipod or put photos on. I also get this message:
An error occured while updating the default player for audio file types. You do not have enough access privileges for this operation.
WHAT DO I DO???????

Perhaps check for corrupted files--I had this issue with a messed up track/ file, and that kept killing the sync. More here:
Lost in Asia, "Disk Could Not Be Read From or Written To." #12, 03:32am Oct 15, 2005 CDT
As for the access privileges part, well, sorry, I have absolutely no idea what that means.
Good luck!

Downloading the 10.6.8 Update Combo v1.1 and it seems stuck at "registering updated components". It's running but I've had "about a minute" left for 30 minutes now

Trying to download the 10.6.8 Update Combo v1.1 and it seems stuck at "Registering updated components". It's been saying it has "about a minute" left for at least a half hour. What do I do?

Try downloading it from the Apple site. Set Safari to download to the desk top:Safari preferences>general>save downloads to desktop. Download to desktop, and run the installer:
http://support.apple.com/kb/DL1399

And need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

and need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

The requirements for iTunes:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Your Mac must be able to run OSX 10.6.8. If you can run that OSX then you can run iTunes 11.1.
Which Mac do you have?
MJ

In import PO - what are the g/l accounts updated.

hi
in import PO what are the g/l accounts updated.
example:
1.Miro(bill of entry) - 7 conditions if freight and clearing n forwarding
   Charges extra 2 conditions
2.Migo
3.Excise - J1iex_p
4.Miro(for freight and clearing n forwarding)
5.Miro(for main vendor)
just tell me
Regards
Manju

Hi,
There are following 7 Import Duties;
JCDB     IN:Basic Custom Duty
JCV1     IN : CVD
JECV     IN : Ed Cess on CVD
J1CV     IN : H&SECess on CVD
JEDB     IN : Ed Cess on BCD
JSDB     IN : H&SECess on BCD
JADC     Addnl Duty of Custom
1. MIRO (Customs Office)
Customs Office Vendor - Cr
CVD Clearing A/c - Dr
CVD Clearing A/c - Dr
CVD Clearing A/c - Dr
CVD Clearing A/c - Dr
Customs Clearing A/c - Dr
Customs Clearing A/c - Dr
Customs Clearing A/c - Dr
2. J1IEX (Capture BOE)
No FI Entry
3. MIGO (GR)
Stock A/c - Dr
GR/IR Clearing A/c - Cr
Customs Clearing A/c - Cr
Clearing & Forwarding Charges A/c - Cr
4. J1IEX (Post BOE)
CENVAT Input BED - Dr
CENVAT Input ECS - Dr
CENVAT Input SECess - Dr
CENVAT Input ADC - Dr
CVD Clearing A/c - Cr
5. MIRO (Import Vendor)
Import Vendor - Cr
GR/IR Clearing A/c - Dr
6. MIRO (Clearing Agent)
Clearing Agent Vendor - Cr
Clearing & Forwarding Charges A/c - Dr

HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information.

I started getting these errors on one of my lists that has several workflows running on it. The strange thing is it has been running pretty much error free for 1.5 years and we have not made any changes to the workflows and no updates have been applied prior
to the errors staring.
It is typically always the same workflow but it doesn't always happen, only some of the newly added list items will error. If I simply cancel the current instance and manually start it again it runs fine to completion and it only seems to error out
at the start.
Most of the other workflows pause/wait for a status change but I will be reviewing all the workflows to confirm there is no locking conflict. I have added a Wait to one other workflow that I know will update the list item on startup, it is populating
the Title column but even after that I am still getting the error.
I noticed in the TraceLogs, 2 errors that started on Feb 2 and I could not find them in any previous logs (went back many days with no occurrences).
02/02/2015 07:15:55.93 w3wp.exe (0x1C50)                       0x18D4 SharePoint Foundation
Workflow Infrastructure       88xr Unexpected WinWF Internal Error, terminating workflow Id# 6cbf1da4-fbf9-4dfe-ae48-b6d765cc6d03
02/02/2015 07:15:56.37 w3wp.exe (0x1C50)                       0x2140 SharePoint Foundation
SPRequest                     8l3a Medium Failed to cache field with id "{49af83c9-c5e3-47db-b055-bf18673bba67}", overwrite=0
The "Field ID"{49af83c9...} listed is a Lookup column to a Clients list on the same site.
Any suggestions on what could be causing the sudden errors. I will be reviewing all other workflows but as I mentioned previously, this system has been working great up until Feb 2 with no changes to the lists or workflows for 3-6+ months.
Thanks in advance.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

My iphone 5s won't show up in itunes after the 11.1.4 update. How do I connect it so I can sync music again?

It's been about three weeks since I was able to connect my phone to itunes. When I connect my phone to my computer, it will show up on the desktop, and I can sync my photos, but itunes doesn't recognize it. I've tried removing and downloading itunes three times, and have restarted my phone and nothing's changed. I know there's nothing wrong with the usb cable or my phone. I'm pretty confindent that it has something to do with the 11.1.4 update. Does anybody know how this can be fixed?

Hello macr888,
I would be concerned as well if my iPhone was not recognized by iTunes. Thank you for providing all the information with the steps you took in regards to this issue. I found an article with a few more steps you can take (you can skip the steps you have already taken):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

HP Envy dvd drive issues after the Windows 8.1 update

I have a HP Envy and after the Windows 8.1 update the dvd drive is not working. I can see the drve but it is difficult to get the drive to open or recognise there is a disc in it. What can I do?

Hello @Jenino,
I understand that you are having issues with the Optical Drive on your HP ENVY 7 PC. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Can you help me interpret the following lines in UPDATE rule?

Hi,
Can you help me interpret the following lines in UPDATE rule?
1. What is the role of role of u201CCHANGING RESULT.u201D and u201CCHANGING lc_local_value.u201D?
2. What is the role of the CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY', in particular the Exporting and Importing parts?
3. Can I say that u201CCOMM_STRUCTURE-ORDER_VALu201D in the subroutine is passed to u201Clc_document_valueu201D in the u201CFORM loc_curr_convertu201D; and further passed to u201Cforeign_amountu201D in the u201CCALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'u201D?
4. Finally, what becomes of my original u201CActual Goods receipt quantityu201D( 0GR_QTY ) which I am writing the routine for? I donu2019t see any where in the code that it is being referred to? Do any of these codes affect the value of 0GR_QTY?
5. Also, if there are 3 different subroutines in the INCLUDE and I am making the change described in #4 above, how do I know which of the 3 subroutines to call?
===============================
===============================
So I am reviewing a transfer routine in for u201CActual Goods receipt quantityu201D and routine an INCLUDE statement: INCLUDE RS_BCT_MM_UPDATE_RULES.
The update rule also includes the following properties to run the following subroutine in the Include:
IF u2026..
perFORM LOC_CURR_CONVERT
           USING    COMM_STRUCTURE-ORDER_VAL
                    COMM_STRUCTURE-DOC_DATE
                    COMM_STRUCTURE-ORDER_CURR
                    COMM_STRUCTURE-LOC_CURRCY
                    COMM_STRUCTURE-EXCHG_RATE
           CHANGING RESULT.
I verified in the INCLUDE (RS_BCT_MM_UPDATE_RULES) and the subroutine is as follows:
FORM loc_curr_convert
USING    lc_document_value
           lc_date
           lc_document_currency
           value(lc_local_currency)
           lc_rate
CHANGING lc_local_value.
conversion of lc_rate from floating-point to decimal. Necessary for *
call of CONVERT_TO_LOCAL_CURRENCY.
data lc_rate_dec type p decimals 5.
lc_rate_dec = lc_rate.
IF lc_document_currency = lc_local_currency
no conversion necessary -> Main case 1
    AND NOT ( lc_document_currency IS INITIAL
           OR lc_local_currency IS INITIAL ) .
    lc_local_value = lc_document_value.
ELSEIF NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
conversion necessary with lc_date -> Normally not possible
    CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
      EXPORTING
        date                 = lc_date
        foreign_amount       = lc_document_value
        foreign_currency     = lc_document_currency
        local_currency       = lc_local_currency
        rate                 = lc_rate_dec
      IMPORTING
      EXCHANGE_RATE        =
        local_amount         = lc_local_value
      EXCEPTIONS
        NO_RATE_FOUND        = 1
        OVERFLOW             = 2
        NO_FACTORS_FOUND     = 3
        NO_SPREAD_FOUND      = 4
        DERIVED_2_TIMES      = 5.
    IF sy-subrc NE 0.
message a802 with lc_date lc_document_currency lc_local_currency
                    sy-subrc.
    ENDIF.
ELSE.
if conversion not possible -> assign target values
    lc_local_value = lc_document_value.
    lc_local_currency = lc_document_currency.
ENDIF.
ENDFORM.

HI,
Thanks so much the explanations.
I just verified again on our dev system and the update rule for 0GR_QTY (Actual goods receipt quantity) include the following:
    perFORM QUANTITY_CONVERT
       USING    COMM_STRUCTURE-CPQUAOU
                COMM_STRUCTURE-po_UNIT
                COMM_STRUCTURE-base_uom
                COMM_STRUCTURE-numerator
                COMM_STRUCTURE-denomintr
       CHANGING RESULT
Now, in the include, I also found:
FORM QUANTITY_CONVERT
USING    QC_SOURCE_VALUE
           QC_SOURCE_UNIT
           VALUE(QC_TARGET_UNIT)
           QC_UMREZ
           QC_UMREN
CHANGING QC_TARGET_VALUE.
i. Does it mean it actually does quantity conversion?
ii. If you have access to the INCLUDE I will appreciate some hints on what the subroutine QUANTITY_CONVERT is doing. It does not appear do to be saying anything about quantity conversion; but it is supposed to be doing something with the parameters being passed from the update routine.
iii. In your response to #5, after all the computation in the INCLUDE, what comes back to the Update rule i.e. what comes back to become the value of 0GR_QTY?
Is it the u201CRESULT.u201D in the update rule or u201CQC_TARGET_VALUE.u201D in the subroutine in the INCLUDE.
iv. So, am to create an Update rule for 0PSTNG_DATE and the source is BUDAT; and I need to write a routine using the include INCLUDE RS_BCT_MM_UPDATE_RULES.
I looked through the INCLUDE and identified all the subroutines in this INCLUDE as follows:
QUANTITY_CONVERT
LOC_CURR_CONVERT
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Does it mean that to use this subroutine, I can only use the USING parameters of one of these listed subroutines?
--Also, does it mean that because 0PSTNG_DATE is a date, I can only use one of
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Or, are there other includes to be used for 0PSTNG_DATE
Thanks

The 10.6.5 Update is a pile of

Similar Messages

Maybe you are looking for