The account has been changed from only local currency to multiple currency.

hI,
The customer has an Account "X" which is a balance sheet account. and not a reconciliation account.
this account has been changed on November 11, 2008, from only local currency to multiple currency.
Local currency is ZAR, and document currency is EUR.
i.e, the check box 'only balance in local balance' has been unchecked from 11 Nov, 2008.
so, when i see the balance of this account in FS10N.
the balances in currency ZAR and EUR is different.
because the balance which is in EUR is only for months 11 and 12.
so, questions are...
1) can we make it same balance in both the currencies by posting a document only in EUR?
2) how to clear it?
Regards,
Swetha

The balance in the currency (EUR) depends upon the currency exchange rates you have defined in the system.  When you post a document in another currency, the exchange rate mentioned for the currency pairs (ZAR & EUR for example) is applied and the balance is written in your local currency.  If you want that the balances in difference currencies are the same, then the exchange rates should be the same for all relevant pairs of currencies.

Similar Messages

  • Every time i wake my mac i get This computer's local hostname "D-360.local" is already in use on this network. The name has been changed to "D-444.local".

    error message that my local host name is in use and the system generates a new one every time I wake my mac the error mssg reads This computer’s local hostname “D-360.local” is already in use on this network. The name has been changed to “D-444.local”.

    There are several possible causes for this behavior.
    1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local". Resolve the name conflict by renaming one or more of them in the Sharing preference pane.
    2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
    3. A Mac wakes from sleep due to network traffic. This is a bug in OS X that may only affect some models.
    4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
    5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
    6. See also this support article.

  • What does this mean?  This computer's local hostname "Linda-Daviss-iMac-4.local" is already in use on this network. The name has been changed to "Linda-Daviss-iMac-5.local".

    What does this mean: This computer’s local hostname “Linda-Daviss-iMac-4.local” is already in use on this network. The name has been changed to “Linda-Daviss-iMac-5.local”.
    When I came back to my computer this message was on the screen.  Should I be concerned ? or doing something?

    Sometimes this message means that you have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. Disconnect the Ethernet cable or turn off Wi-Fi.
    Sometimes it happens because a device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
    Rename the computer in the Sharing preference pane.

  • Should I ok "this computer's local hostname Irma-Mac-mini-local" is already in use on this network. The name has been changed to Irma2 Mac-mini 2-local

    Should I ok this message-this computer's local hostname Irma's Mac-mini-local is already in use on this network. The name has been changed to Irma's Mac-mini-2local

    Don't think this is a conflict with IP Addresses or computer names
    = DHCP hangover when computer renews DHCP lease
    There is no actual other computer
    It just appears that way when reconnects so creates new -2 computer name
    What types of names do you use your computers ?
    Whether you name them after quantum particles or the romantic poets...
    They will each start to be appended with "-2" then "-3" etc if you auto configure network settings from Airport Router  DHCP service and you have this Change computer name issue where pop up window states name is already being used on your LAN
    As stated previous post you can reset the computer name in SysPrefs / Sharing / Edit button
    And restart Router or renew all DHCP leases (if persists in not allowing original name)
    Can now press Edit and reset name of choice
    But for Fix see link above

  • HT5167 Error after 10.7.4 upgrade..."computer's local hostname ........is already in use on this network.  The name has been changed to......  What to do now to get it back to status before 10.7.4 upgrade?

    Error after 10.7.4 Lion Upgrade to iMac
    Computer's local host name .......is already in use on this network.  the name has been changed to........
    and it keeps adding up the number each time I wake the iMac.
    What to do to get it back before upgrade error?

    Ok worth repeating, hope this works.  Finally spoke to AppleCare Support and walked me thru following...restart computer holding down "command" and "option" keys at the same time with letters "P" and "R" when computer turns on.  This is what he called a PR restart, clears out discrepancies in memory (if that is what the error message actually is).  Then went to Systems Preferences/Network/Sharing and deleted the number that kept increasing every time MAC would wake up.
    Even tho this was just done, I am hopeful that error pop-up won't happen again.  Fingers crossed!

  • I get this message:This computer's local hostname "x-8.local" is already in use on this network. The name has been changed to "x-9.local" I have turned off sharing and it continues to upgrade name. What is the fix?

    I get this message: This computer’s local hostname “x-8.local” is already in use on this network. The name has been changed to “x-9.local” I have turned off sharing and it continues to upgrade name. What is the fix?

    Hi, this is a common problem, mostly just irksome though.
    It can have many cause, like using more than one Interface for connections, Router temporarily losing x.local & seeing a new connection with x.local already used, insists it must be x-1.local, x-2.local, etc..
    What all Sharing do you have enabled?
    Some possible fixes...
    http://forums.macrumors.com/showthread.php?t=542899
    https://discussions.apple.com/thread/3941367

  • I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered

    I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?

    I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.

  • CME: phone number has been changed from 8 digit to 9 digit

    Hi Folks,
    I have a site who is in Rio, Brazil whos cell phones has been changed from 8 digit to 9 digit. In order for me to comply I need to update the dial peer/plan for CME 8.6 . Anyone who can give advice or instructions is appreciated.
    e.g
    Example: +551521 9691-XXXX changed to +551521 9 9691-XXXX
    Thanks

    here you go..
    voice class custom-cptone BR-Anatel
      dualtone ringback
       cadence 1000 4000 1000 4000
      dualtone disconnect
       frequency 425
       cadence 250 250 250 250
    voice translation-rule 1
      rule 1 /^00[1-9][1-9]\(.*\)$/ /015\1/
      rule 2 /^000[1-9][1-9]\(.*\)$/ /0015\1/
      rule 3 /^090[1-9][1-9]\(..........\)$/ /9015\1/
    voice translation-profile ChangeCSP
      translate called 1
    license udi pid CISCO2921/K9 sn XXXXXXX
    hw-module pvdm 0/0
    username admin privilege 15 secret 4 xxx.x.x..x.x.x.xx.x.x
    username liderit privilege 15 secret 4 xxx.x.x..x.x.x.xx.x.x
    redundancy
    controller E1 0/0/0
      framing NO-CRC4
      ds0-group 0 timeslots 1-15,17-21 type r2-digital r2-compelled ani
      cas-custom 0
       country brazil
       metering
       debounce-time 10
       answer-signal group-b 1
       trunk-group Vivo-E1
    controller E1 0/0/1
    ip ssh time-out 60
    ip ssh authentication-retries 2
    ip ssh version 2
    translation-rule 1
    interface Embedded-Service-Engine0/0
      no ip address
      shutdown
    interface GigabitEthernet0/0
      ip address xx.xxx.x.xxx 255.255.xxx.xxx
      duplex auto
      speed auto
    interface GigabitEthernet0/1
      no ip address
      shutdown
      duplex auto
      speed auto
    interface GigabitEthernet0/2
      no ip address
      shutdown
      duplex auto
      speed auto
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    ip route 0.0.0.0 0.0.0.0 xx.xxx.x.xxx
    snmp-server community sparky RO
    snmp-server community abc123
    snmp-server location Brazil
    tacacs-server host xx.xx.x.xxx timeout 5
    tacacs-server directed-request
    tacacs-server key 7 xxxxxxxx
    control-plane
    voice-port 0/0/0:0
      translation-profile outgoing ChangeCSP
      disc_pi_off
      cptone BR
      timeouts interdigit 5
      timeouts call-disconnect 0
      bearer-cap Speech
    voice-port 0/1/0
      trunk-group Vivo-Analog
      translation-profile outgoing ChangeCSP
      disc_pi_off
      cptone BR
      timeouts interdigit 5
      timeouts call-disconnect 0
      connection plar 6500
      description ### Vivo +55 11 3078-9782 ###
      bearer-cap Speech
    voice-port 0/1/1
      trunk-group Vivo-Analog
      translation-profile outgoing ChangeCSP
      disc_pi_off
      cptone BR
      timeouts interdigit 5
      timeouts call-disconnect 0
      connection plar 6500
      description ### Vivo +55 11 3078-9728 ###
      bearer-cap Speech
    voice-port 0/1/2
      trunk-group Vivo-Analog
      translation-profile outgoing ChangeCSP
      disc_pi_off
      cptone BR
      timeouts interdigit 5
      timeouts call-disconnect 0
      connection plar 6500
      description ### Vivo +55 11 3078-9735 ###
      bearer-cap Speech
    voice-port 0/1/3
      disc_pi_off
      cptone BR
      timeouts interdigit 5
      timeouts call-disconnect 0
      connection plar 6500
      shutdown
      description ### Intercom ###
      bearer-cap Speech
    mgcp profile default
    dial-peer voice 1 pots
      trunkgroup Vivo-E1
      description ### PSTN inbound ###
      incoming called-number .T
      direct-inward-dial
    dial-peer voice 2 pots
      trunkgroup Vivo-E1
      description ### Local Calls - Fixed ###
      destination-pattern 0[2-5].......
    dial-peer voice 3 pots
      trunkgroup Vivo-E1
      description ### Local Calls - Mobile ###
      destination-pattern 0[6-8].......
    dial-peer voice 4 pots
      trunkgroup Vivo-E1
      description ### Local Calls - Mobile ###
      destination-pattern 09T
      forward-digits 9
    dial-peer voice 5 pots
      trunkgroup Vivo-E1
      description ### Long Distance Calls - Fixed ###
      destination-pattern 00[1-9][1-9]..[2-6].......
      forward-digits 13
    dial-peer voice 6 pots
      trunkgroup Vivo-E1
      description ### Long Distance Calls - Mobile ###
      destination-pattern 00[1-9][1-9]..[7-9].......
      forward-digits 13
    dial-peer voice 7 pots
      trunkgroup Vivo-E1
      description ### International Calls ###
      destination-pattern 000T
      prefix 00
    dial-peer voice 8 pots
      trunkgroup Vivo-E1
      description ### Toll Free Calls ###
      destination-pattern 00800T
      prefix 0800
    dial-peer voice 9 pots
      trunkgroup Vivo-E1
      description ### 0300 Calls ###
      destination-pattern 00300T
      prefix 0300
    dial-peer voice 10 pots
      trunkgroup Vivo-E1
      description ### 0303 Calls ###
      destination-pattern 00303T
      prefix 0303
    dial-peer voice 11 pots
      trunkgroup Vivo-E1
      description ### Emergency Calls ###
      destination-pattern 019.
      forward-digits 3
    dial-peer voice 12 pots
      trunkgroup Vivo-E1
      description ### Service Numbers Calls ###
      destination-pattern 01[0-8]T
      prefix 1
    dial-peer voice 13 pots
      trunkgroup Vivo-E1
      description ### Local Calls - Collect Calls Fixed ###
      destination-pattern 09090[2-5].......
      prefix 9090
    dial-peer voice 14 pots
      trunkgroup Vivo-E1
      description ### Local Calls - Collect Calls Mobile ###
      destination-pattern 09090[6-8].......
      prefix 9090
    dial-peer voice 15 pots
      trunkgroup Vivo-E1
      description ### Local Calls - Collect Calls Mobile ###
      destination-pattern 090909T
      prefix 90909
    dial-peer voice 16 pots
      trunkgroup Vivo-E1
      description ### Long Distance Calls - Collect Calls ###
      destination-pattern 090[1-9][1-9]..[1-9].......
      forward-digits 14
    dial-peer voice 22 pots
      trunkgroup Vivo-Analog
      description ### Local Calls - Fixed ###
      preference 1
      destination-pattern 0[2-5].......
    dial-peer voice 23 pots
      trunkgroup Vivo-Analog
      description ### Local Calls - Mobile ###
      preference 1
      destination-pattern 0[6-8].......
    dial-peer voice 24 pots
      trunkgroup Vivo-Analog
      description ### Local Calls - Mobile ###
      preference 1
      destination-pattern 09T
      forward-digits 9
    dial-peer voice 25 pots
      trunkgroup Vivo-Analog
      description ### Long Distance Calls - Fixed ###
      preference 1
      destination-pattern 00[1-9][1-9]..[2-6].......
      forward-digits 13
    dial-peer voice 26 pots
      trunkgroup Vivo-Analog
      description ### Long Distance Calls - Mobile ###
      preference 1
      destination-pattern 00[1-9][1-9]..[7-9].......
      forward-digits 13
    dial-peer voice 27 pots
      trunkgroup Vivo-Analog
      description ### International Calls ###
      preference 1
      destination-pattern 000T
      prefix 00
    dial-peer voice 28 pots
      trunkgroup Vivo-Analog
      description ### Toll Free Calls ###
      preference 1
      destination-pattern 00800T
      prefix 0800
    dial-peer voice 29 pots
      trunkgroup Vivo-Analog
      description ### 0300 Calls ###
      preference 1
      destination-pattern 00300T
      prefix 0300
    dial-peer voice 30 pots
      trunkgroup Vivo-Analog
      description ### 0303 Calls ###
      preference 1
      destination-pattern 00303T
      prefix 0303
    dial-peer voice 31 pots
      trunkgroup Vivo-Analog
      description ### Emergency Calls ###
      preference 1
      destination-pattern 019.
      forward-digits 3
    dial-peer voice 32 pots
      trunkgroup Vivo-Analog
      description ### Service Numbers Calls ###
      preference 1
      destination-pattern 01[0-8]T
      prefix 1
    dial-peer voice 33 pots
      trunkgroup Vivo-Analog
      description ### Local Calls - Collect Calls Fixed ###
      preference 1
      destination-pattern 09090[2-5].......
      prefix 9090
    dial-peer voice 34 pots
      trunkgroup Vivo-Analog
      description ### Local Calls - Collect Calls Mobile ###
      preference 1
      destination-pattern 09090[6-8].......
      prefix 9090
    dial-peer voice 35 pots
      trunkgroup Vivo-Analog
      description ### Local Calls - Collect Calls Mobile ###
      preference 1
      destination-pattern 090909T
      prefix 90909
    dial-peer voice 36 pots
      trunkgroup Vivo-Analog
      description ### Long Distance Calls - Collect Calls ###
      preference 1
      destination-pattern 090[1-9][1-9]..[1-9].......
      forward-digits 14
    dial-peer voice 99 pots
      destination-pattern 9
      port 0/1/3
      forward-digits all

  • Against the account has been blocked

    Against the account has been blocked

    There are 2 different commands and 2 different users, they're not tied and changing the pwd from one doesn't affect the other.
    You need to reset the pwd from the CUC admin user, not the OS user.
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/installation/guide/7xcucig020.html#wp196868
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • I keep getting a warnin that my pages document could not be auto saved. The file has been changed by another application. Click save anyway to keep your changes and save the changes made by the other application as a version, or click revert to keep the c

    I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
    What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
    Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.

    I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
    Working with a Retina Macbook Pro and current software
    These are newly created documents

  • HT1267 i have a iphone 3gs but i cant use it now the status has been change so i cant use it. im in china

    i have a iphone 3gs from 3years i go i bought in the states now im in china and i can register it .........the apple store here in shanghai says the status has been changed on the phone so i cant use it........what can i do?

    You have to get AT&T to unlock it. You'll have to call them.

  • After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

    After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

    I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

  • My app account has been deleted from appstore,and i can't download purchased items on my new imac

    my app account has been deleted from appstore,and i can't download purchased items on my new imac
    what should i do?i purchased aperture 3 and final cut pro

    "my app account"
    Click Account under Quick Links right side of the App Store window then sign in.
    If you can login using your Apple ID, then your account is in good standing.
    Otherwise try here >  Apple ID: "This Apple ID has been disabled for security reasons"  appears

  • HT4759 I want open my icloud  access my account but did not prospered, says the account has been suspended security reasons

    Hello dear sir I want open my icloud  access my account but did not prospered, says the account has been suspended security reasons and I'm the owner of the icloud account and I have passowrd
    Can you help me in to  open my account please
    Note I tried to re-change the password several times via e did not prospered
    <Personal Information Edited by Host>

    يا سيدي، الرجاء فتح حسابي وعدم حذف الصور هويتي
    مرحبا سيدي العزيز أريد فتح بلدي صول icloud حسابي ولكن لم ازدهرت، ويقول لقد تم تعليق حساب أسباب أمنية وأنا صاحب حساب icloud ولقد passowrd
    هل يمكنك مساعدتي في فتح حسابي من فضلك
    بلدي  هويتي التفاح أو icloud أو البريد  ملاحظة حاولت إعادة تغيير كلمة المرور، عدة مرات عن طريق البريد لم ازدهرت
    Message was edited by: stevemei
    <Personal Information Edited by Host>

  • Cannot save ... The file has been changed by another application.

    Hi,
    This is to report a wierd behavior when pages is auto saving documents.
    An error pops up  "Cannot save ... The file has been changed by another application."
    Clicking "save anyways" seems to save the document OK, but still this is very anoying.
    Saving the document manually (from the menu) isn't showing any error message.
    Can someone help with a hint as of when this will be fixed or is there a workaround?
    Thank you in advance,
    Best Regards,
    Michel.
    Pages version 5.0.1 (1478) on OS X 10.9

    The phrase "by another application" makes it pretty clear that it is not Pages (or, in your case, Keynote).
    What seems to be happening is that between the time that Pages opens a document, or saves it and the next time that it attempts to save it, something updates the document's file on the hard drive. Pages, recognizing that the file contains changes for which it is not responsible, presents this alert so you can decide whether you want to overwrite those changes. The usual suspects are backup and synchronization applications, like iCloud, which may not recognize the "Open" flag on the file, but I think it can also be triggered by AppleScripts, Automator workflows and Services, if they perform a "Save" action on the file.

Maybe you are looking for