The acount information could not be verified - SQL 2005 SP3 installation on Windows 2008 R2 Failover Cluster

Hi,
We have a problem when we are trying to install SQL SP3 on SQL 2005 cluster.
The problem is described bellow:
We installed a new Windows 2008 R2 x64 failover cluster with two nodes.
As a next step we installed SQL 2005 Enterprise edition x64 on this failover cluster. We have finished the installation without problems. After SQL installation we are trying to install SQL SP3 . We have logged on using a domain administrator account and
we start the installation of SP3 with that user. In authentication mode screen the test gives a success status using either domain administrator-windows authentication or sa-sql authentication. On remote user account screen, when we give the domain
administrator account we get the message "the account information could not be verified. Press ok to return to authentication mode screen to determine the reason for failure".
We have tried to give the SQL services startup user on remote user account screen but the error is the same.
the domain administrator account exists on security logins of SQL with sysadmin rights.
Can someone help?
Thanks. 

Hi StelioMavro,
According to your error message, when you install SQL Server 2005 SP3 in your failover cluster, we need to verify if there was other instance that had been removed and the installation did not pass the login check. I recommend you use windows authentication
instead of SQL Server authentication when applying SP3. And the windows account used to run the SP3 setup program must have administrator privileges on the computer where SP3 will be installed.
For more information about how to install SQL Server 2005 SP3 in failover cluster, you can review the following article.
http://www.sqlcoffee.com/Tips0007.htm
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Similar Messages

  • The update "iTunes" could not be verified and expanded correctly.

    Hi all,
    I was tryng to upgrade to the latest version of iTunes and I got this message
    *The update "iTunes" could not be verified and expanded correctly.*
    *It also says: Make sure you have permission to write*
    *to /tmp/501/TemporaryItems.com.apple.SoftwareUpdate, then try again.*
    Any ideas what that means?
    Thanks,
    Anarie

    http://docs.info.apple.com/article.html?artnum=106712

  • I'm having problems installing OSX update 10.9.2. Twice I have tried to install, and both times I get the message - Update could not be verified. Can anyone advise ?

    I'm having problems installing OS X update 10.9.2. Twice I have tried to install, and both times I get the message - Update could not be verified. Can anyone advise ?

    Are you updating from the App Store when you get that error message?
    If so, thry using the 10.9.2 Combo update -> http://support.apple.com/kb/DL1726.
    Good luck,
    Clinton

  • While i was updating it was failed for 3 times and then i started to update it again and then it was showing as the product verification could not be verified and the product verification may be damaged or not signed

    while i was updating it was failed for 3 times and then i started to update it again and then it was showing as the product verification could not be verified and the product verification may be damaged or not signed

    Mavericks installer can’t be verified
    Mavericks Installer can’t be verified (2)
    Try running the combo update.
    10.9.2

  • I am suddenly getting "the network connection could not be made"

    I am getting the error message "the network connection could not be made" and am online without any problems. Itunes etc been fine until a week ago and now can't get it to connect to the net - can someone help me with what to do!

    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Inc. Dimension 5100
    iTunes 7.7.0.43
    QuickTime 7.5
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.0.0.33
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number 84F27A17068673F2
    Current user is an administrator.
    The current local date and time is 2008-07-20 17:53:01.
    iTunes is not running in safe mode.
    Video Display Information
    RADEON X300 SE 128MB HyperMemory
    RADEON X300 SE 128MB HyperMemory Secondary
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {FA357741-DCC2-4994-B232-D8FB3AB95C51}
    Description: GlobeSpan USB ADSL LAN Modem - Packet Scheduler Miniport
    IP Address: 169.254.205.203
    Subnet Mask: 255.255.0.0
    Default Gateway: 169.254.205.203
    DHCP Enabled: Yes
    DHCP Server: 255.255.255.255
    Lease Obtained: Sun Jul 20 08:03:53 2008
    Lease Expires: Tue Jan 19 03:14:07 2038
    DNS Servers:
    Adapter Name: {294C775D-3EBF-4C83-9FC4-B8AF44B2A5F3}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: No
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name: {073C330F-5F60-45A9-A866-E576CAA4A8F7}
    Description: WAN (PPP/SLIP) Interface
    IP Address: 92.4.72.142
    Subnet Mask: 255.255.255.255
    Default Gateway: 92.4.72.142
    DHCP Enabled: No
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers: 92.31.241.20
    92.31.241.20
    92.31.241.21
    Adapter Name: {AB8D5AB8-67B8-4A81-846F-A0ABA0CC542D}
    Description: WAN (PPP/SLIP) Interface
    IP Address: 172.200.129.209
    Subnet Mask: 255.255.255.255
    Default Gateway:
    DHCP Enabled: No
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers: 205.188.146.145
    205.188.146.145
    Active Connection: dialbb 2
    Connected: Yes
    Online: Yes
    Using Modem: Yes
    Using LAN: No
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Disabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection could not be made.
    Connection attempt to iTunes Store was unsuccessful.
    The network connection could not be made.
    Secure connection attempt to iTunes Store was unsuccessful.
    The network connection could not be made.
    Secure connection attempt to iPhone activation server unsuccessful.
    The network connection could not be made.
    Last successful store access was 2008-07-06 17:03:11.
    Here's what I got. I cleared down DNS as it told me to do but still not working.

  • Software Update - could not be verified and expanded

    I tried to do a search on this, but didnt initially find anything.
    Software Update runs, finds updates to download, I click Install Updates, they are downloaded but then I get an error that reads, The update "XYZ" could not be verified and expanded correctly. Make sure you have permissions to write to /private/tmp/501/temporariyitems, then try again.
    I tried to chown the permissions on that directory, no difference. I then did:
    sudo su
    cd /private
    rm -r tmp
    mkdir tmp
    cd /
    ln -s /private/tmp tmp
    ...and now the error message for software update has become: blah blah blah, Make sure you have permission to write to /tmp/com.apple.SoftwareUpdate, then try again.
    Can anyone help? This computer has been sitting dormant for a couple of months and I wasnt the main user before so I can only assume this has been going on for a while and is not a new issue. Thanks!!!
    Message was edited by: Arbitrage1

    Arbitrage:
    I wasnt the main user before
    Do you have an admin account on the computer?
    Instead of Software Update, I suggest that you download and install 10.3.9 Combo Update. Remember to Repair Disk Permissions before and after installation.
    Happy Holidays.
    cornelius

  • PayPal account could not be verified

    I'm trying to set up payment processings. When I put in my e-mail address and click Register account I get a message saying " The PayPal account could not be verified. I know it's the correct e-mail address and I have used it to collect payments on other sites. Any idea what the problem is?

    Hi,
    I checked our server log. It appears that at the time when you clicked the Register Account button, your FormsCentral sign-on cookie had been expired, therefore our server rejected the Register Account request.
    Please log out from FormsCentral and log in again, then open your form and try to register your PayPal account again. Please let me know if this does not work to you.
    Thanks,
    Eman Fu
    Senior Computer Scientist
    Adobe Systems Incorporated

  • Dboraslib.dll - Error 126 : "The specified module could not be found."

    Hi,
    After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
    The dev_disp trace file shows the following error:
    Please do help to resolve this problem.
    trc file: "dev_disp", trc level: 1, release: "640"
    Mon Aug 09 12:14:43 2004
    kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
    length of sys_adm_ext is 524 bytes
    ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c       237]
            Error 126 = "The specified module could not be found."
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    1
    intno      0
    make:      multithreaded, Unicode
    pid        2908
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c   1093]
         shared lib "dw_xml.dll" version 1 successfully loaded
         shared lib "dw_xtc.dll" version 1 successfully loaded
         shared lib "dw_stl.dll" version 1 successfully loaded
         shared lib "dw_gui.dll" version 1 successfully loaded
    Mon Aug 09 12:14:48 2004
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3878]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          10528     (1316)
    DpShMCreate: sizeof(tm_adm)          2506872     (12472)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpShMCreate: sizeof(comm_adm)          290000     (580)
    DpShMCreate: sizeof(vmc_adm)          0     (372)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06440040, size: 2919328)
    DpShMCreate: allocated sys_adm at 06440040
    DpShMCreate: allocated wp_adm at 06441B58
    DpShMCreate: allocated tm_adm_list at 06444478
    DpShMCreate: allocated tm_adm at 064444A0
    DpShMCreate: allocated wp_ca_adm at 066A8518
    DpShMCreate: allocated appc_ca_adm at 066AE2D8
    DpShMCreate: allocated comm_adm_list at 066B0218
    DpShMCreate: allocated comm_adm at 066B0230
    DpShMCreate: allocated vmc_adm_list at 066F6F00
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 066F6F28
    DpShMCreate: allocated wall_adm at 066F6F30
    MBUF state OFF
    Mon Aug 09 12:14:49 2004
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
    <ES> 613 blocks reserved for free list.
    ES initialized.
    Mon Aug 09 12:14:52 2004
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3216
      argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1352
      argv[5] = -DLISTEN_PORT=1353
      argv[6] = -DSAPSYSTEM=00
      argv[7] = -DSAPSYSTEMNAME=SXI
      argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
      argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[10] = -DFRFC_FALLBACK=ON
      argv[11] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c   1455]
    ***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c   9701]
    Mon Aug 09 12:14:54 2004
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 1
    Release check o.K.
    Mon Aug 09 12:15:33 2004
    ERROR => W0 (pid 3224) died [dpxxdisp.c   12152]
    ERROR => W1 (pid 3232) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 3240) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 3248) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 3256) died [dpxxdisp.c   12152]
    ERROR => W5 (pid 3264) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W6 (pid 3272) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W7 (pid 3280) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-3224 (SIGUSR2)
    ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c   2464]
    killing W1-3232 (SIGUSR2)
    ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c   2464]
    killing W2-3240 (SIGUSR2)
    ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c   2464]
    killing W3-3248 (SIGUSR2)
    ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c   2464]
    killing W4-3256 (SIGUSR2)
    ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c   2464]
    killing W5-3264 (SIGUSR2)
    ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c   2464]
    killing W6-3272 (SIGUSR2)
    ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c   2464]
    killing W7-3280 (SIGUSR2)
    ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c   2464]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:43 2004
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)               Mon Aug 09 06:45:43 2004
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     3224 Ended         no      1   0             0                                                             
    1 DIA     3232 Ended         no      1   0             0                                                             
    2 UPD     3240 Ended         no      1   0             0                                                             
    3 ENQ     3248 Ended         no      1   0             0                                                             
    4 BTC     3256 Ended         no      1   0             0                                                             
    5 BTC     3264 Ended         no      1   0             0                                                             
    6 SPO     3272 Ended         no      1   0             0                                                             
    7 UP2     3280 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Mon Aug 09 06:45:43 2004
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    10
    10
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          13
    wake_evt_udp_now     0
    wake events           total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    since last update     total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    Dump of tm_adm structure:               Mon Aug 09 06:45:43 2004
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Aug 09 06:45:43 2004
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:48 2004
    NiISelect: TIMEOUT occured (5000 ms)
    Shutdown server ...
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
    killing process (3216) (SOFT_KILL)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    NiSelClear: removed hdl 3 from selectset
    DpDelSocketInfo: del info for socket 3 (type=7)
    NiBufClose: clear extensions for hdl 3
    NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 3 / socket 456
    NiSelClear: removed hdl 4 from selectset
    DpDelSocketInfo: del info for socket 4 (type=9)
    NiBufClose: clear extensions for hdl 4
    NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 4 / socket 448
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing process (3172) (SOFT_KILL)
    Stop icman
    killing process (3196) (SOFT_KILL)
    Terminate gui connections
    [DpProcDied] Process lives  (PID:3172  HANDLE:472)
    waiting for termination of gateway
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:49 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3172  HANDLE:472)
    [DpProcDied] Process died  (PID:3196  HANDLE:464)
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:50 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:51 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:52 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:53 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:54 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:56 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:57 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:58 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:59 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:00 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:01 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:02 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:03 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:04 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:05 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:06 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3216  HANDLE:440)
    NiIMyHostName: hostname = 'cgnlpt036'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9927]
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiSelClear: removed hdl 5 from selectset
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
    MBUF component DOWN
    NiBufClose: clear extensions for hdl 5
    NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 5 / socket 368
    MsIDetach: detach MS-system
    EsCleanup ....
    ***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c   8460]
    Good Bye .....

    Hi,
    Thanks for the reply.
    dboraslib.dll is properly installed - I checked the registry and physical location of the file.
    The problem was : Environment variable "Path" not being set properly for the "oracle jre".
    Solution:
    After setting the path, the dispatcher started to run properly without any problems.
    Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
    FYI - We are using WIN2K with SP4 and oracle DB 9.2
    Regards,
    Sridhar

  • Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

    Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
    I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
    I have upgraded the XP OS to SP3 with numerous updates;
    Checked that the USB ports read Data sticks OK;
    run a/v and malware programs, including Microsoft Safety Scanner;
    checked that USB drivers are up to date;
    uninstalled driver software and re-installed with software downloaded from HP;
    carried out the procedures detailed in HP Support Forum 4022116
    Error message the same.  
    This is for my elderly neighbour - help please!
    This question was solved.
    View Solution.

    Hi @bodger50,
    Welcome to the HP Forums! 
    I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
    I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
    Hope this is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • RUNDLL, error loading c:\documents the specified module could not be found

    Hi! I am new here and really need your help. We have a few Lenovo T400 notebooks. If I want to install Windows XP Prof with SP3 I always get this error dialog during GUI mode setup 9 Min. before finishing.
    RUNDLL, error loading c:\documents the specified module could not be found 
    We install this version of Windows on other notebooks without error. The logs show nothing special.
    Nothing really happens but it's looks bad for our customers. I think I am not alone because there are more
    entries in different forums with same problem without solution.
    Every help is appreciated. Thanks!

    Thanks for your reply! But the list of hotfixes on Microsoft Knowledge Base includes this hotfix?
    List of fixes that are included in Windows XP Service Pack 3
    888111  (http://support.microsoft.com/kb/888111/ ) Universal Audio Architecture (UAA) High Definition Audio class driver version 1.0a available for Windows XP, Windows Server 2003, and Windows 2000 Hotfix
    http://support.microsoft.com/kb/946480/en-us
    Sorry, we use Windows XP SP3 with this hotfix included. All of our other hardware which needs this hotfix too works fine with SP3.

  • SQL version could not be verified error while installing the SCOM 2012 R2 reporting component

    I have the below SCOM server roles in my SCOM 2012 R2 set up
    1) All servers with Windows Server 2008 R2 SP1, MS - SCOM1, DB & DW - DB1, Reporting Server - DB2
    2) All the DB servers with SQL 2012 SP1
    3) Windows firewall is turned off on all the servers.
    4) Success fully installed all the components except SCOM reporting.
    While installing the SCOM 2012 R2 reporting component on DB2 ( Iam running this set up on the server where I instllaed the SQL DB engine and reportin services in Native mode. Configured the SQL reporting database and reporting URLs successfully in SQL reporting
    configuration manager) getting the below error in the Rporting server instance page. Kindly advise.
    I ran mofcomp.exe and there is no firewall restrictions. My account also has DB owner & sysadmin permissions.
    Also tried re installing the SQL on Reporting server.
    "The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
    Configurations document for further information".

    Hi,
    As far as I know, after installing SSRS, we don't need to configure the database and reporting URLs manully. When we install the reporting service for SCOM, it will configure those automatically.
    If possible, you may re-install SSRS and then install SCOM reporting service.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation

    Hi Guys,
    Currently i am trying to install SCOM2012R2 with SQL 2012 SP1. When i proceed with SCOM installation, getting an error
    "The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
    Configurations document for further information.
    SQL Collation i selected as per System Center2012 guide SQL_Latin1_General_CP1_CI_AS
    Can some one please help me on this?
    Regards
    Kris
    Kris

    Hi,
    Please check logs for further information. Let us know what the logs says:
    http://www.systemcentercentral.com/opsmgr-2012-my-installation-failed-what-log-files-do-i-read-and-where-can-i-find-them/
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • SQL Server 2005 Database Mail - Mail configuration information could not be read from the database.

    I'm trying to setup Database Mail and send a test message, but it's not working.
    I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
    I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
    I check the Database Mail and I get the following message:
    Log Database Mail (Database Mail Log)
    Log ID 152
    Process ID 7684
    Last Modified 3/14/2013 6:49:58 PM
    Last Modified By SPEEDLING\sqlservice
    Message
    1) Exception Information
    ===================
    Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
    Message: Mail configuration information could not be read from the database.
    Data: System.Collections.ListDictionaryInternal
    TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
    HelpLink: NULL
    Source: DatabaseMailEngine
    StackTrace Information
    ===================
       at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
       at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
       at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
       at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
    2) Exception Information
    ===================
    Exception Type: System.IndexOutOfRangeException
    Message: timeout
    Data: System.Collections.ListDictionaryInternal
    TargetSite: Int32 GetOrdinal(System.String)
    HelpLink: NULL
    Source: System.Data
    StackTrace Information
    ===================
       at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
       at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
       at System.Data.SqlClient.SqlDataReader.get_Item(String name)
       at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)

    I'm trying to setup Database Mail and send a test message, but it's not working.
    I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
    I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
    I check the Database Mail and I get the following message:
    Log
    Database Mail (Database Mail Log)
    Log ID
    152
    Process ID
    7684
    Last Modified
    3/14/2013 6:49:58 PM
    Last Modified By
    SPEEDLING\sqlservice
    Message
    1) Exception Information
    ===================
    Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
    Message: Mail configuration information could not be read from the database.
    Data: System.Collections.ListDictionaryInternal
    TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
    HelpLink: NULL
    Source: DatabaseMailEngine
    StackTrace Information
    ===================
       at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
       at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession
    dbSession)
       at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
       at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
    2) Exception Information
    ===================
    Exception Type: System.IndexOutOfRangeException
    Message: timeout
    Data: System.Collections.ListDictionaryInternal
    TargetSite: Int32 GetOrdinal(System.String)
    HelpLink: NULL
    Source: System.Data
    StackTrace Information
    ===================
       at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
       at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
       at System.Data.SqlClient.SqlDataReader.get_Item(String name)
       at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)

  • The necessary security privileges could not be verified.

    Hi,
    We have a crystal report reporting off information integrator with sql server in the backend.
    This report uses a universe as a datasource.
    We are getting the following error while trying to run the report on demand:
    "Error A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server."
    If we schedule the report the following error msg can be found in the reportjobserver logs:
    " trace message: CrpeMgrPEGetHandleStringEx() out returns [1], buffer is [Database Connector Error: ''^MFailed
    to retrieve data from the database.^MError in File /usr/lpp/businessobjects/boe/bobje/data/reportjobserver01/~tmpad0d85852f0c7061d.rpt:
    The query when submitted through qwest returns back data, but is failing to run on the server.
    I am not sure what is going wrong, timeouts for page server has been set to 60 mins, but this error is returned within 10 mins of refreshing or scheduling the report.
    Any ideas?
    Thanks,
    Sumit

    Hi,
    I ran a test.
    I used the sql from the report, created a new report off that sql and published it to the server.
    It seems to be working. The report ran successfully.
    Thus I have seen that the report fails only when it is using an universe.
    I restarted the report job server along with Webi report server/page server multiple times but that didn't help much.
    I will be opening a message with SAP regarding the problem.
    Thanks,
    Sumit

  • Failed to verify gateway status. The remote name could not be resolved: 'machinename' Office 365, Power BI

    Hi
    I am trying to setup a Power BI On Premise datasource at a client site. 
    I successfully installed the Data Management Gateway (DataManagementGateway_1.2.5303.1_en-us (64-bit)) software on a Windows Server 2012 box and created the Gateway on the Power BI Office 365 site.
    The Gateway is running correctly with no errors. When trying to setup the Datasource I get an error. As soon as I try to set the credentials the following message appears. 
    Failed to verify gateway 'GatewayName' status. The remote name could not be resolved: 'servername.domainname.net’ 
    The servername which is returned in the error message is exactly the name which the DMG was installed on. 
    There is a firewall in place with a proxy server and I don't know if this might cause the problems. The
    following website suggests adding the proxy settings in the config files of the DMG but this did not solve the problem.
    The above setup process works perfectly when running the DMG from my laptop, connecting to a Gateway and creating a DataSource connecting to SQL Server.
    Any assistance would be appreciated.

    HI
    Thank You for the reply.
    I resolved the issue in the mean time. I was on laptop which does not belong to the domain.
    When setting up the datasource you should be on the same domain as the datasource as per the below post.
    http://sharepoint-community.net/profiles/blogs/connecting-office-365-to-on-premises-data
    Regards, Drickus

Maybe you are looking for

  • Some Voice Memos do not sync from iPhone to Mac?

    I recorded a number of meetings to my iPhone using the Voice Memo app. When I sync with my Mac, most of these transfer to iTunes, but a handful don't, for no reason I can see. I did not record them any differently from the ones that made it across. I

  • The uploaded file CPSIDRPT.xml is invalid. The file should be in XML-DATA-T

    can someone explain me why am I getting following error message when I'm trying to upload a data defination file? The uploaded file CPSIDRPT.xml is invalid. The file should be in XML-DATA-TEMPLATE format. thanks........ ketki----

  • Internal table and work area

    Hi,        can anybody explain the concepts of Internal table and work area.Thanks in advance.

  • Solaris 10 installation - 3/05 release

    Hello, I have Sol 8 running on a Blade 150. Last year I downloaded the 3/05 release of Sol 10 and burned it to DVD. I am thinking of finally upgrading to Sol 10. Two questions: 1) Should I install the 3/05 release from my DVD, or download the latest

  • Import X5 project into RH 7

    Just got RH 7; how do I import my X5 project into RH 7?