The acquisition of group asset in AW01N not correct

Dear Experts,
I have a group asset is A, and there are 3 asset A1, A2, A7.  this 3 assets belongs to group asset A.
I buy A1 with acquisition value =10. I see in column  CHANGE in tcode AW01N of group asset A, A has acquisition value =10.
After that I transfer from A1 to A2 with amount =2, in column CHANGE of tcode AW01N, A has acquisition value =12. After that I transfer from A1 to A3 with amount =4, in column CHANGE of tcode AW01N, A has acquisition value =14.
3 asset A1, A2, A7 belongs to group asset A. I transfer assets within A, so the acquisition of A would be = 10, but in column  CHANGE in tcode AW01N, A has acquisition value =14 in year 2010, but in year 2011 I see A has acquisition value =10. I donu2019t know why?
Please help me to solve for A has acquisition value =10 in year 2010.
Thank you so much,
Nhung

Dear ravikumar,
1. when I transfer the A1 asset with value 10$ to A2 asset for 2$ is it showing the value of A1 asset as 8$.
2. the accounting entries: PK 75    A1   2-
                                     PK 70    A2   2  
Additional information:
When I transfer the A1 asset with value 10$ to A2 asset for 2$, in the reports as following:
In report S_ALR_87012050 - Asset Acquisitions, A has value acquisition =10$
but in report S_ALR_87011963 - ... by Asset Number  A has value acquisition =12$
thank you,
Nhung

Similar Messages

  • My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct.I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

    My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • HT201317 When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • The Apple Id on my phone is not correct. How do I change it?

    When I go to download an app, the Apple ID on my phone is not correct. How do I change it?

    follow the link
    http://support.apple.com/kb/HE40

  • The sign-in ID or password is not correct

    So I just woke up to play on my PS4, and the first thing I noticed was I was not longer signed into PSN. When I went to go sign in, it forced me to reset my password, which I did and I can log onto the playstation website just fine. However when I try to log on to my PS4 with my info, it says "The sign-in ID or password is not correct".  How do I fix this? There is nothing wrong with the way I am putting in my info

    See:
    iOS: Troubleshooting FaceTime and iMessage activation

  • Management API - Create VM - InvalidXmlRequest - The request body XML was invalid or not correctly specified

    Hi,
    I am getting error while creating virtual machine from Azure REST management API. Could someone please point me what wrong I am POSTing in below XML
    ERROR ---
    <Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Code>InvalidXmlRequest</Code><Message>The request body's XML was invalid or not correctly specified.</Message></Error>
    " <Deployment xmlns=\"http://schemas.microsoft.com/windowsazure\" xmlns:i=\"http://www.w3.org/2001/XMLSchema-instance\">" +
    " <Name>SomeName</Name>" +
    " <DeploymentSlot>Production</DeploymentSlot>" +
    " <Label>SomeLabel</Label>" +
    " <RoleList>" +
    " <Role>" +
    " <RoleName>SomeRoleName</RoleName>" +
    " <RoleType>PersistentVMRole</RoleType>" +
    " <ConfigurationSets>" +
    " <ConfigurationSet i:type=\"WindowsProvisioningConfigurationSet\">" +
    " <ConfigurationSetType>WindowsProvisioningConfiguration</ConfigurationSetType>" +
    " <ComputerName>SomeCompName</ComputerName>" +
    " <AdminPassword>Admin098</AdminPassword>" +
    " <EnableAutomaticUpdates>true</EnableAutomaticUpdates>" +
    " <ResetPasswordOnFirstLogon>false</ResetPasswordOnFirstLogon>" +
    " </ConfigurationSet>" +
    " <ConfigurationSet i:type=\"NetworkConfigurationSet\">" +
    " <ConfigurationSetType>NetworkConfiguration</ConfigurationSetType>" +
    " <InputEndpoints>" +
    " <InputEndpoint>" +
    " <LocalPort>3389</LocalPort>" +
    " <Name>RemoteDesktop</Name>" +
    " <Protocol>tcp</Protocol>" +
    " </InputEndpoint>" +
    " </InputEndpoints>" +
    " </ConfigurationSet>" +
    " </ConfigurationSets>" +
    " <OSVirtualHardDisk>" +
    " <DiskName>SomeDiskName-0-20121007173943</DiskName>" +
    " <MediaLink>http://portalvhdsrx7q659n2n5j2.blob.core.windows.net/public/myvhd0008980.vhd</MediaLink>" +
    " <SourceImageName>MSFT__Win2K8R2SP1-Datacenter-201208.01-en.us-30GB.vhd</SourceImageName>" +
    " </OSVirtualHardDisk>" +
    " <RoleSize>Small</RoleSize>" +
    " </Role>" +
    " </RoleList>" +
    " </Deployment>"I have tried adding admin user name as well to the xml but still get same error.Please suggest

    the format of the request body is:
    <Deployment xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
    <Name>name-of-deployment</Name>
    <DeploymentSlot>deployment-environment</DeploymentSlot>
    <Label>identifier-of-deployment</Label>
    <RoleList>
    <Role>
    <RoleName>name-of-the-virtual-machine</RoleName>
    <RoleType>PersistentVMRole</RoleType>
    <VMImageName>name-of-vm-image</VMImageName>
    <ConfigurationSets>
    <ConfigurationSet i:type="WindowsProvisioningConfigurationSet">
    <ConfigurationSetType>WindowsProvisioningConfiguration</ConfigurationSetType>
    <ComputerName>name-of-computer</ComputerName>
    <AdminPassword>administrator-password</AdminPassword>
    <EnableAutomaticUpdates>enable-updates</EnableAutomaticUpdates>
    <TimeZone>time-zone</TimeZone>
    <DomainJoin>
    <Credentials>
    <Domain>domain-to-join</Domain>
    <Username>user-name-in-the-domain</Username>
    <Password>password-for-the-user-name</Password>
    </Credentials>
    <JoinDomain>domain-to-join</JoinDomain>
    <MachineObjectOU>distinguished-name-of-the-ou</MachineObjectOU>
    </DomainJoin>
    <StoredCertificateSettings>
    <CertificateSetting>
    <StoreLocation>LocalMachine</StoreLocation>
    <StoreName>name-of-store-on-the-machine</StoreName>
    <Thumbprint>certificate-thumbprint</Thumbprint>
    </CertificateSetting>
    </StoredCertificateSettings>
    <WinRM>
    <Listeners>
    <Listener>
    <Protocol>listener-protocol</Protocol>
    </Listener>
    <Listener>
    <CertificateThumbprint>certificate-thumbprint</CertificateThumbprint>
    <Protocol>listener-protocol</Protocol>
    </Listener>
    </Listeners>
    </WinRM>
    <AdminUsername>name-of-administrator-account</AdminUsername>
    <CustomData>base-64-encoded-data</CustomData>
    </ConfigurationSet>
    <ConfigurationSet i:type="LinuxProvisioningConfigurationSet">
    <ConfigurationSetType>LinuxProvisioningConfiguration</ConfigurationSetType>
    <HostName>host-name-for-the-virtual-machine</HostName>
    <UserName>new-user-name</UserName>
    <UserPassword>password-for-the-new-user</UserPassword>
    <DisableSshPasswordAuthentication>password-authentication</DisableSshPasswordAuthentication>
    <SSH>
    <PublicKeys>
    <PublicKey>
    <FingerPrint>certificate-fingerprint</FingerPrint>
    <Path>SSH-public-key-storage-location</Path>
    </PublicKey>
    </PublicKeys>
    <KeyPairs>
    <KeyPair>
    <FingerPrint>certificate-fingerprint</FinguerPrint>
    <Path>SSH-public-key-storage-location</Path>
    </KeyPair>
    </KeyPairs>
    </SSH>
    <CustomData>base-64-encoded-data</CustomData>
    </ConfigurationSet>
    <ConfigurationSet>
    <ConfigurationSetType>NetworkConfiguration</ConfigurationSetType>
    <InputEndpoints>
    <InputEndpoint>
    <LoadBalancedEndpointSetName>name-of-load-balanced-set</LoadBalancedEndpointSetName>
    <LocalPort>local-port-number</LocalPort>
    <Name>name-of-endpoint</Name>
    <Port>external-port-number</Port>
    <LoadBalancerProbe>
    <Path>path-of-probe</Path>
    <Port>port-assigned-to-probe</Port>
    <Protocol>probe-protocol</Protocol>
    <IntervalInSeconds>interval-of-probe</IntervalInSeconds>
    <TimeoutInSeconds>timeout-for-probe</TimeoutInSeconds>
    </LoadBalancerProbe>
    <Protocol>endpoint-protocol</Protocol>
    <EnableDirectServerReturn>enable-direct-server-return</EnableDirectServerReturn>
    <EndpointACL>
    <Rules>
    <Rule>
    <Order>priority-of-the-rule</Order>
    <Action>permit-rule</Action>
    <RemoteSubnet>subnet-of-the-rule</RemoteSubnet>
    <Description>description-of-the-rule</Description>
    </Rule>
    </Rules>
    </EndpointACL>
    </InputEndpoint>
    </InputEndpoints>
    <SubnetNames>
    <SubnetName>name-of-subnet</SubnetName>
    </SubnetNames>
    <StaticVirtualNetworkIPAddress>ip-address</StaticVirtualNetworkIPAddress>
    </ConfigurationSet>
    </ConfigurationSets>
    <ResourceExtensionReferences>
    <ResourceExtensionReference>
    <ReferenceName>name-of-reference</ReferenceName>
    <Publisher>name-of-publisher</Publisher>
    <Name>name-of-extension</Name>
    <Version>version-of-extension</Version>
    <ResourceExtensionParameterValues>
    <ResourceExtensionParameterValue>
    <Key>name-of-parameter-key</Key>
    <Value>parameter-value</Value>
    <Type>type-of-parameter</Type>
    </ResourceExtensionParameterValue>
    </ResourceExtensionParameterValues>
    <State>state-of-resource</State>
    </ResourceExtensionReference>
    </ResourceExtensionReferences>
    <AvailabilitySetName>name-of-availability-set</AvailabilitySetName>
    <DataVirtualHardDisks>
    <DataVirtualHardDisk>
    <HostCaching>caching-mode</HostCaching>
    <DiskLabel>label-of-data-disk</DiskLabel>
    <DiskName>name-of-disk</DiskName>
    <Lun>logical-unit-number</Lun>
    <LogicalDiskSizeInGB>size-in-gb-of-data-disk</LogicalDiskSizeInGB>
    <MediaLink>path-to-vhd</MediaLink>
    </DataVirtualHardDisk>
    </DataVirtualHardDisks>
    <OSVirtualHardDisk>
    <HostCaching>caching-mode</HostCaching>
    <DiskLabel>label-of-operating-system-disk</DiskLabel>
    <DiskName>name-of-disk</DiskName>
    <MediaLink>path-to-vhd</MediaLink>
    <SourceImageName>name-of-source-image</SourceImageName>
    </OSVirtualHardDisk>
    <RoleSize>size-of-virtual-machine</RoleSize>
    <ProvisionGuestAgent>install-an-agent</ProvisionGuestAgent>
    </Role>
    </RoleList>
    <VirtualNetworkName>name-of-virtual-network</VirtualNetworkName>
    <Dns>
    <DnsServers>
    <DnsServer>
    <Name>dns-name</Name>
    <Address>dns-ip-address</Address>
    </DnsServer>
    </DnsServers>
    </Dns>
    </Deployment>
    for more details please see
    this link.
    hope this helps!

  • I can not run the depreciation for particular asset which was not acqustion

    Hi Masters,
                     I have created asset master in july 2010 when i did purchase that asset, but i did not post  the asset aqusistion in f-90 up to january. but on remianing all assets i did run the depreciation job  on every month.  Now in january ,  i have openend the posting periods from july to march and post that asset aqusisition f-90 in july psoting period., we are using april to march fiscal year.
                      when i am trying to  run depreciation job repeat run in  afab in test mode from july to december   it showing the error message that, depreciation already done for that proper periods. But in janauary when i am trying to run in test mode, It showing total depreciation amount from july to january , and it hit to only in january month but not to july to december each months.
    Now i want to psot the deprectiation for each month of july onwards to january 2010.
        pelase reply how to do run deprecaiton for that particular asset for each month for july to january

    Hi
    Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
    If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
    REgards
    Malathi

  • TS4268 im trying to use my apple id for facetime and i enter the right password but still the error message is the password that i've enter is not correct. please do help me. thanks

    plaese help me to activate my facetime.

    Hello Kmart212,
    If you are having issues with FaceTime and iMessage, then check out the articles below for more information on how to troubleshoot your issue further. I would also make sure that your new Apple ID is verified and not causing any conflicts. 
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Regards,
    -Norm G.  

  • HT4910 The copy to information of Mail is not correct!

    We copied our Emails from iCloud to our computer and all Emails got lost on iCloud!

    When you drag messages from an IMAP server such as iCloud to a folder under 'On My Mac' they are downloaded to that folder and removed from the server. In order not to delete them on the server you have to hold the option key while dragging (as when copying rather than moving files from one folder to another).
    You could always re-upload them to a mailbox on iCloud.

  • Review, app store info i wroten all the info's in and say its not correct what should i do!?

    hello, when i use my iphone 4s and i try to login to the app store its say i have to review my account info, and i did everything its said.. but i get error please help

    Good day
    please note that I am also experiencing the same problem I now don't know what to do

  • TS1702 I download the app eNotify to my iPhone 4 but have not being able to linked to my Gmail account. Keep giving me the notice that user or server is not correct. What I need to correct the problem?

    I download the app eNotify to my iPhone 4 but could not linked to my Gmail account. Give me notice that user or server given is incorrect. It instructed me to go to phone settings and make correction but not working still. I need help. I"m not savy in technology.

    Hello there!  You can contact Verietas Support at [email protected]  The most usual error for gmail is that user name is NOT the full email address.  You just want to enter the stuff BEFORE "@gmail.com".  Good luck!

  • The time on my firefox browser is not correct. How do I set the time zone for Firefox? It is not the same as my mac computer setting?

    I am using a hotmail acount with bigpond. The time that it says I sent an email is out by 11 hours... can you please tell me how to set my firefox browser to be at the right time? My mac is set at the right time zone...

    I was able to do what you suggested, and the time listed in the code field was correct. However, when I sent a test email to myself on the bigpond site, it said it was received at 8:04am when it was actually 18:04. So there is an error of more than half a day. I have a snapshot of the screen if that is helpful. I asked Bigpond about this and they said it was a Firefox problem... Please advise.

  • Group asset does not manage area 01-Msge no. AA809 in AW01N-Parameter Tab

    Hi All,
    For my Client in Development Server,
    When i select Parameter Tab- in t.c.AW01N.
    The below error message is coming for all Asset Classes Assets.
    Group asset does not manage area 01
    Message no. AA809
    Diagnosis
    You have specified for the asset that depreciation area 01 is to be managed in group asset  . However, depreciation area 01 is not managed on the group asset level.
    Procedure
    Correct your entry.
    I have checked in
    1.Specify Depreciation Areas for Group Assets(T.C.OAYM),
    For depreciation area 01-Group Asset check box is not selected.
    2. Specify Asset Classes for Group Assets(t.c.OAAX).
    In this screen for all Asset Classes(except Group Asset Class), check boxes are not selected(for class consists entirely of group assets).
    Please any one guide me how to solve this issue.
    But there is no this type of error in Production Server.
    Thanks in Adv

    Hi
    there has been a simular problem, this might help you:                                                                               
    This asset has 4 depreciation areas all attatched to Group asset         
    1665265. But, this group asset has only 3 depreciation areas. When you   
    would double click on Asset 1665268, you would come across Error Msg     
    AA809.                                                                               
    Group asset does not manage area 10                                      
    Message no. AA809       
    Blaz

  • Asset history sheet not picking Aw01n data

    Dear SAP experts,
    Would anybody know any reasons why report S_ALR_87011990 (Depreciation Area 15 - Revaluation) is not bringing expected data?
    Output is showing Zero but if you click in the lines, it will call up AW01N view correctly. Problem is in the output of 87011990 History sheet.
    However, if you run Asset list via S_ALR_87011964, data comes up correclty and if you click in each line, it will also  call up AW01N asset explorer view.
    Any help is welcome
    Thank you

    Hi
    For Reports Goto T.code SAP1
    Anil

  • Please tell me the group assets configuration

    my client wants , add the assets to groups assets,  and how many assets are there for a particular group, but i am unable to search that . i dont know group assets concept. please tell me the configuration.

    Hi anji,
    the system calculates depreciation at the level of individual assets. Certain types of calculation needs or tax requirements (such as in the U.S.A.) make it necessary, however, to calculate depreciation at a higher level. For this purpose, you can group assets in the FI-AA system together into so-called group assets. You can group assets together per depreciation area to form group assets.
    It is basically possible to use all asset classes for creating group assets. you need to set aside particular asset classes for use in conjunction with group assets. These asset classes are then reserved solely for group assets, and are not allowed to be used for normal assets.
    A group asset is represented in the system by a separate master record.
    FI-AA: Master Data -> Group Assets
    http://help.sap.com/saphelp_45b/helpdata/en/4f/71dfff448011d189f00000e81ddfac/content.htm
    asset acounting
    Assign points if useful
    Regards
    genie

Maybe you are looking for

  • Cancel Sales Order lines that are picked

    Hi 1. I'm trying to cancel sales order lines through process order api that are picked and delivery status is Staged/Pick Confirmed. The error is You are not allowed to cancel Order Line because: Line has been pick confirmed/staged. I'm unable to per

  • Kann kein labview vi von ni vision assistant machen

    habe labview 7 base development inklusive application builder, und ni vision development module 7.0 installiert

  • Importing Russian audio to iTunes

    I'm new to Mac OS, so this may be a simple question. I work in both the English and Russian language. I have a number of Russian mp3 CDs that have audio files titled in Russian (Cyrillic). Importing these files directly from the CD to iTunes not only

  • SQL--XI--RFC Scenario    MONI Error MAPPING" EXCEPTION_DURING_EXECUTE

    Dear All I am doing Scenario  SQLXIRFC Scenario . I am able to pick the data from sender JDBC Communication Channel . But at SXMB_MONI , i am getting this error   MAPPING">EXCEPTION_DURING_EXECUTE <SAP:Category>Application</SAP:Category>   <SAP:Code

  • WUT-100

    I'm calling client_image.read_image_file to download to client from a blob column . I'm getting a 0 byte file in workarearoot directory console shows WUT-100 Has anyone any idea why dbcolumn-file doesn't work correctly? ==webutil 105 unix host ==webu