The Add-on installation is currently in phase DDIC_ACTIVATION

Dear All,
I am applying the addon "ST-A/PI" on SAP ERP 6.0. The status "The Add-on installation is currently in phase DDIC_ACTIVATION" has been there for a few hours now whereas the sap note says it should end in 12 mins approx.
Could you please help in resolving the issue. This is very important.
Thanks
Best Regards,

Welcome to SDN,
You can't change the existing queue if the SPAM status is DDIC_ACTIVATION.
Can you please check the SPAM --> goto --> import logs.
You need to raise an OSS message if you want to reset the SPAM queue.

Similar Messages

The Add-on installation terminated during phase DDIC_ACTIVATION

Hi
We have ECC 6.0 sr3 on windows 2003 with db2 9.1 database.
I am upgrading to ehp3 .
I am getting this error
The Add-on installation terminated during phase DDIC_ACTIVATION
I checked the logs it is shwoing these 2 tables.
Table FAGL_ACTIVEC was activated (error in the dependencies)
View V_FAGL_ACTIVEC_2 could not be activated
please give me some light on this
thanks

thanks for reply
this is 64 bit system
view i checked it is active but the tavle is partially active
if itry to activate that it is giving me so many errors so it is not allowing me to activate.
please help me
thanks

SAP Standard Customizing is missing after the Add-on installation

Dear Experts,
We have an ERP 6.0 EHP4 system and it has been using for a while. We have done an AFS 6.4 Add-on implementation on top of the ERP system.
We have a configuration only client 200 on the system and that was already there before we did the add-on installation.
Once the add-on installation is completed, we could see most of the SAP Standard configuration which should come along with the add-on is not there in client 200. But everything is there on Client 000 without any problem.
What could be the problem ? have we missed anything here.
I have found a note : 337623 which ask you to manually populate the configuration using SFW5.
I'm not very clear about this. Should we really do this SFW5 ? or is there any other way that we coul'd get those configurations in to client 200 where we have years old other configurations.
Appreciate of you could kindly give some ideas as to how I should get this problem fixed.
Thanks a a lot in advance.
Best Regards
Kushan

HI Kushan,
This sounds like it might be the correct behavior. When you install an ADD-ON into SAP, the install process does not know which client you have saved your default customization settings into so it is likely going to put these into client 000 or 001.
Does that help?
J. Haynes

A site I need for consulting purposes requires an add-on known as "Intranet for Firefox". When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site.

A site I need for consulting purposes (http://www.aegtelecom.com.pt/) requires an add-on known as “Intranet for Firefox”. When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site. However, being a steadfast Firefox user, I would prefer to use Firefox for this purpose.

http://www.aegtelecom.com.pt/contactos <br />
Have you tried contacting that web site's support department for help with that issue? <br />
If that web site can't find the add-on it says is needed, they need to fix that problem with their servers.
Or you can try using IE Tab2 to run IE in a Firefox tab. <br />
https://addons.mozilla.org/en-US/firefox/addon/92382

The Add-on installation terminated during phase XPRA_EXECUTION BI_CONT 703

Program terminated (job: RDDEXECL, no.: 16333200)
<ST22 >
SYNTAX_ERROR
Syntax error in program "CL_RSTRAN_TRFN_TPL============CP ".
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_TRFN_TPL============CP " in include
"CL_RSTRAN_TRFN_TPL============CM00B " in
line 112:
"The data object "L_S_TRAN" does not have a component called "ALL_FIELD"
"S"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.

Hi,
Post us the import log. Try executing /$SYNC in the command field to reset the buffer and then retry the SP updation.
Hope this solves ur issue.
Regards,
Varadharajan M

ADD-ON INSTALLATION TERMINATED IN XPRA_EXCUTION PHASE

os:HPUX11.23
db:ORACLE 10.2.0.2
SAP ECC6.0
The phase 'XPRA_EXECUTION' is terninated when I try to import SAP
SEM-BW PATCH "SAPKGS6012" into ECC6.0 system.
the erorr display as following:
Short text
Syntax error in program "/1BCDWBEN/SAPLFEN0007 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_FINB_CONFIGURATION_SERVICE=CP" had to
be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in
program "/1BCDWBEN/SAPLFEN0007 " in
include "/1BCDWBEN/LFEN0007$46 " in
line 5:
"Type "CI_DFKKREP06" is unknown"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
I try to test the program "/1BCDWBEN/SAPLFEN0007 ", the result is
please kindly find the attachmented detailed information.
BTW, I have carefully studied notes:

Hi,
Have you checked SAP note known problems with Support Packages for your release? Normally these kind of erros are recorded in that Note.
XPRA_EXECUTION :- This phase executes the XPRAs and after-import methods
The error shows, syntax error was found in the program /1BCDWBEN/SAPLFEN0007:
"The type "CI_DFKKREP06" is unknown."
You can also do a syntax check in SE38 for the program /1BCDWBEN/SAPLFEN0007, it will show the same error. You can take help of an ABAPer to see what can be done here. You should also create support message to SAP if you are not able to get any standard notes/ known error list.
Check below links. It may help you.
Re: ICR: syntax errors
http://help.sap.com/saphelp_nw04/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
Thanks,
Sushil
Edited by: Sushil Suryawanshi on Jun 1, 2009 3:25 AM

How do I resolve the error "Another installer is currently running, which must be closed before updating" when updating CC on MacOS 10.9.4?

Creative Cloud keeps alerting me to an available update but whenever I try to install it it tells me there is another installer running which must be shut down first.
I've now shut down and restarted the Mac completely and nothing else is running but it still gives me the same error (Error code: 81). See screen shot below.
I'm running Mavericks (OSX 10.9.4). How do I resolve this?

Please try the mentioned steps:
1. Navigate to Applications/Utilities/Adobe Installer and look for CC desktop, if present run the uninstaller to uninstall it.
2. Navigate to Applications/Utilities and look for Adobe Application Manager folder and Creative cloud folder. If present move to trash and empty it.
3. Navigate to Library/Application Support/Adobe/OOBE and rename to OOBE.old
4. Download CC desktop from: https://creative.adobe.com/products/creative-cloud and try to install again.
Other references are:
Troubleshoot CCM Applet installation and download
Re: Adobe application manager fails to update/install
Regards
Rajshree

Error in XPRA EXECUTION Phase of Add On installation in SAP sys in SAINT

Hello All,
I have tried to install VERSANH ADD On on my SAP System with SPAM Version 7.00 <0032 kernal level 48.
i have run transaction SAINT imported all PAT and ATT files and started the process.
now after running around 16 Hrs it is throwing error in XPRA EXECUTION Phase.
The Error is
The Add on installation terminated during phase XPRA EXECUTION
Choose CONTINUE to continue the import
Choose BACK to delete the installation queue
Choose LOGS to display the import logs
i have clicked on Continue, the it process and after 1 Hr throws same error
i have navigated to OS Level in usrsaptranslog and there in log i am getting this line as error
ERROR RFC function TRINT PROGRESS INDICATOR returned 18
Thanks in advance.
Edited by: Vinit Soni on Apr 14, 2009 11:05 AM
Edited by: Vinit Soni on Apr 14, 2009 11:06 AM
Edited by: Vinit Soni on Apr 14, 2009 11:07 AM
Edited by: Vinit Soni on Apr 14, 2009 11:08 AM

Please check the log files under /usr/sap/trans/tmp directory. There will be some information about the error and paste the log here to analyze the problem.
Regards,
Subhash

Please add a "CC 2014 compatible" filter to the add-ons browser

Hi,
Now that almost all existing extensions are incompatible with PS CC 2014 (thanks a lot for this strange move), it would be useful to add a corresponding filter in the add-ons browser. Currently, you can only discover that an extension is not compatible with CC 2014 when you try to install it. You can acquire it but it doesn't actually installs and doesn't appear in the Extension Manager CC. You try and try again until you understand that a lot of extensions have been broken and will never install PS CC 2014. Sometimes you get the following error message :
error -411
Compatible CC app not found.
Solution: Install a compatible Adobe application before installing Add-ons.
which is rather funny after all.
Of course, installing such a filter would result in a very short list.

I suspect this is not going to end well in the short term. Flypaper Textures will probably be fixed because Russell Brown is employed by Adobe, and is an evil genius who will have no problems with HTML5, but as for the rest of our favourite extensions, it's too much to expect all of the authors to recode them in HTM5.
This is not strictly relevant, but Lazy Nezumi — which is not an extension so still works thank goodness — is only available for Windows. It's the greatest aid to drawing with Photoshop since they invented graphics tablets, and a lot of people have paid for a license. I exchange the odd email with Guillaume, the author, and he says he knows he should make a Mac version, but it never happens. My guess is that coding for the Mac is too different to coding in Windows, so the job remains stuck in the too hard basket, and Guillaume misses out on significant income. It's not that he can't be arsed, because he constantly updates the Windows version with really nice new features. I have no idea how different coding in HTML5 is to coding in Flash, but I really hope the answer is 'not very'. Fixing our extensions will still be a big ask, because even if it is not that hard, most of them are completely free, so where is the incentive?

Add-On installation showing admin privileges error

Hi all,
Scenario for SAP 9.0 PL 07 :-
I have logged in using Windows Standard user profile.
The SAP folder in " C:\Program Files\SAP " has been given full Admin privileges.
But still not able to install the Add-Ons. Giving error of no rights/permission .
Can you please help me locate some other folder which need to be given Admin privileges so that the Add-Ons will install.
Regards,
Angad

@ Pvsb prasad k,
Thanks for the reply.
We have tried giving full rights(full control) to the user for the SAP folder in " C:\Program Files\SAP ".
But still the Add-On installation problem exists.
Is there any other folder of SAP which requires the full control permission to be given?
Please suggest.
Regards,
Angad

System Settings Add-On Installer on KDE4.9 [Solved/Disregard]

Hey everyone!
I've been having this problem for days now and I can't figure out what to do. So, here's the problem, I have a working internet connection and everything, however, if I want to go and get a new window decoration the Add-On Installer never gets passed the Initializing loader on the bottom. I have left it alone for hours and it still never got past it. Any ideas?
EDIT: Have no idea what happened, but I woke up this morning and found it working again. So maybe server's were down...? I had upgraded my system (pacman -Syu), so maybe something changed the problem.
Last edited by Nanashi (2013-01-22 19:42:33)

QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
This error means nothing. Its caused by apps using KUniqueApplication, which does some basic stuff like creating a D-Bus connection and forkes to create the real applications see:
https://bugs.kde.org/show_bug.cgi?id=297020

How to deliver add-on installation package to clients

Hi,
We have successfully released the add-on installation package. Now how could we deliver it our clients. how could we deliver the package to others.
regards
chinta

sorry bro,
it did not help me.
i would like to know how i could deliver my package to my clients.
i have a pat file with me, i have a password of it, i have successfully released the package.
but how i could deliver it to my clients..
say if you want to use my package how could i give it to you. bro.
regards
chinta

I installed the Illustrator 2014 in its English version, but I need the Hebrew support too (ME). How can I add it to my current installation?

Hi,
I’d purchased the full CC 2014 and downloaded from your web site.
Unfortunately, I installed the Illustrator 2014 in its English version only and I would like to install the Illustrator ME with
Hebrew support as well as right to left support.
How can I add the Hebrew support to my current installation?

Hi Hans-Günter,
Thank you for your quick reply, I looked at the website and if I understood correctly, in order to change my CC applications to support the ME/RTL I must
un-install the Illustrator 2014, and re-install it, selecting this option in the Language preferences.
Do I need to re-install the whole CC package? or only the Illustrator?
Gabi

Mac OS X 10.7 drivers for HP LaserJet 1300: installation at the "Add Printer" process ended, every time, with message "Currently drivers for this printer are UNavailable..."! PLEASE HELP?

APPLE [see Apple Support's Article HT 3669] says Mac OS X 10.7 (Lion) has drivers for this Printer.
But, every time I've tried installing it to my Mac Book Pro (which came with OS X 10.7), it does recognize that the Printer (connected via USB cable) is HP LaserJet 1300 -- in fact, right below, this statement appears: "The drivers for this Printer are available...". But, when it comes to the actual process of downloading, the "Add Printer" window -- after 20+ minutes of its "searching" for the drivers -- always ends with the message: "Currently drivers for this printer are UNavailable... contact the manufacturer."!!! (Can you imagine? Apple says it's available... but its own "Add Printer" process says it's UNavailable!)
I went to HP's support site, and it, too, says that drivers for this Printer are available! -- see the 2 links:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=4152639
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915680&tmp_track_link=ot_ faqs/top_issues/en_us/c02915680/loc:4&cc=us&dlc=en&lc=en&product=4152639#N507
Can somebody help me? Would very much appreciate it.

You haven't installed any of the Photoshop updates for CS5.
Go download and install the updates.

HI I WAS WONDERING IF THE NEW GARAGEBAND WOULD ERASE OR REPLACE MY CURRENT GARAGEBAND SOFTWARE AD LOOPS, OR IS IT AN ADD ON TO MY CURRENT PLATFORM? IN OTHER WORDS WILL ANY THING CHANE WITH MY CURRENT GRAGEBAND SOFTWARE? THANKS - WP

HI I WAS WONDERING IF THE NEW GARAGEBAND WOULD ERASE OR REPLACE MY CURRENT GARAGEBAND SOFTWARE, INVENTORY AND LOOPS, OR IS IT AN ADD ON TO MY CURRENT PLATFORM? IN OTHER WORDS WILL ANY THING CHANE WITH MY CURRENT GRAGEBAND SOFTWARE IF I MAKE THI UPDATE? THANKS - WP

What is your current GarageBand version?
Your profile signature says "OS X Mountain Lion (10.8.5)", but the newest GarageBand, version 10.0.2, requires Mavericks. Are you planning on upgrading from Mt. Lion to Mavericks?
The newest GarageBand 10.0.2 is very different from the earlier GarageBand '11, version 6.0.5.
Some features, like podcasts, are missing. The GUI layout is more like Logic than GarageBand, the effects can no longer be combined freely, but you have to use the predefined patches. But this version adds nice new features like Drummers or Arpeggiators. and not all of your audio units may be compatible.
If you upgrade to GarageBand 10.0, the new version can open your older projects, no problem. But once opened in GB 10.0, they will no longer work in GB '11.
The installer will not overwrite GB '11, but move it to a subfolder in Applications, and you can use both versions cuncurrently. They do not interfere and you can use GB '11 as before.
-- Léonie

The Add-on installation is currently in phase DDIC_ACTIVATION

Similar Messages

Maybe you are looking for