The admin server could not be reached

Dear All,
I have oracle weblogic server running on red hat enterprise Linux, with one managed server. I created a self-signed certificate to access the admin server using SSL connection, after creating the certificate and start running the domain, The admin server run fine, but when i start running the managed server using
$ ./startManagedWebLogic.sh osb_server1 https://server_ip:7006 i got that error, " The admin server could not be reached on https://server_ip:7006
and the managed server running independence of admin server, as well as admin server can not establish jmx:t3 connection with the managed server on its SSL port
also in admin server log i got this error
<Sep 30, 2013 6:51:00 PM EET> <Warning> <JMX> <BEA-149504> <The adminstration server was unable to establish JMX Connectivity with the osb_server1 at the JMX Service URL of service:jmx:t3://172.17.11.13:8011/jndi/weblogic.management.mbeanservers.runtime.>
how can i resolve this error?
thanks in advanced

Hi John,
Thanks. Notable errors in this log are:
Failed to connect.[Root Cause: Connection refused ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
Attempting to connect to Native Directory: Retry Count: 10 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
Failed to connect to native directory. com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
Any ideas?
Thanks.
Edited by: 960369 on 21-Sep-2012 02:56
Edited by: 960369 on 21-Sep-2012 03:33

Similar Messages

BEA-141151 The admin server could not be reached at ...

I have been at this for 3 days now... I created a new ManagedServer, but I'm not able to make it connect to the Admin server.
The Admin server is running and listening on port 5306. I can connect to the Admin Console (web).
I can also connect to the Admin server via WLST, using this command: connect('operator','operator01','t3://localhost:5306')
However, when I try to run the managed server from a script, it does not see the Admin server. This is the command I run:
java -Dweblogic.Name=ManSer1 -Dweblogic.management.server=t3://localhost:5306 -Dweblogic.RootDirectory=<path to my domain> weblogic.Server
This is the error I get:
<BEA-141151> <The admin server could not be reached at http://localhost:5306.>
I believe it's trying to connect using "http", because I've never actually connected in the past. Here is a website explaining this: http://download.oracle.com/docs/cd/E17904_01/web.1111/e13749/weblogicserver.htm#i1031832
Note: Regardless of which protocol you specify, the initial download of a Managed Server's configuration is over HTTP or HTTPS. After the RMI subsystem initializes, the server instance can use the T3 or T3S protocol.
I'm not sure what else to try... Firewalls are not in play, since this is traffic moving around on the local machine. I'm running on SunOS. Weblogic is version 9.2 MP3.
Appreciate any help.

Is the NodeManager , AdminServer running ?The NodeManager is not running. Is it required?
Also, I haven't closed the command prompt.
I noticed the issue when I tried to deploy my project. Connected to Localhost/7001 but in the deploy project window, I dont see any soa_server instance
running. Also, in the console the soa_server status is shutdown.

So i restarted my iPod and it is telling me that the activation server could not be reached! I don't know how to fix it. please help!

So i restarted my iPod and it is telling me that the activation server could not be reached. And I don't know how to fix it. Please help!!

Maybe this is applicable
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
This says the Activation Servers are on-line
http://www.apple.com/support/systemstatus/

I've had a 4s for two years and today when i turned it on it told me my phone could not be activated becasue the activation server could not be reached. what should i do? i'm lost.

i've had a 4s for two years and today when i turned it on it told me my phone could not be activated becasue the activation server could not be reached. what should i do? i'm lost.

i do not know what this means. I purchased the phone brand new two years ago and have never had any problems with it. The message i am getting reads:
"your iphone could not be activated because the activation server cannot be reached. try connecting your iphone to itunes (which i don't have) to activate it, or try again over cellular connection in a couple minutes. (which i have tried several times with no success) you can also try to activate using wi-fi connection (which i do not have). if this problem persists, contact apple support at apple.com/support."

"Your iPhone could not be activated because the activation server could not be reached"

It won't let me set up my phone due to the wifi- it keeps coming up with "Your iPhone could not be activated because the activation server could not be reached". The wifi is definitely working- I'm using it now! However, after you have entered the password for this wifi you do have to enter details into a portal but this hasn't popped up so I can't do it. This is the wifi I have, any ideas? Thank you in advance

3 possible causes for this message:
1] activation server is actually down. Extremely rare occurrence and of very short duration
if it happens.
2] iPhone is jailbroken or hacked.
3] computer the iPhone is hooked to has been used to jailbreak or hack iOS devices.
For 1], try again. Try different wifi at friend's, school, public place like Starbucks or McDonalds.
For 2] & 3], you are on your own. Google may provide some insight. Terms of Use for this
forum prohibit discussion of hacked and jailbroken devices.

HT4623 my ipad could not activate because the activation server could not be reached. tried to connect to itunes error about network was rese. how to fix?

ipad could not activate because activation center could not be reached . I plugged to itunes then something bout my network connection was reset

Authentication servers are ALSO slammed right now.
Give it some time.
download servers VS. authentication servers

HT4623 I'm upgrading to ios 7, and I'm getting a message saying "Your iPhone could not be activated because the activation server could not be reached" I've gotten this now 10 times and have even tried activating it through iTunes which also did not work.

I am trying to upgrade my phone to iOS 7, I restored it so it would download the new software and now it is telling me that it cannot be activated. How do I get around this?

unfortunately no, a million people are attempting to update their phones right now, and thus activate them. Patience will have to suffice.
For the future, I would recommend not updating essential work devices on the launch day

Administration Server could not be reached

I have installed WebLogic 12c on a WinXP machine and configured a domain in development mode. Apart from the admin server there is only one managed server ms1.
By using the startup scripts I am successfully able to start both AdminServer and ms1 and access the console.
Then I enabled SSL ports on both AdminServer & ms1, enabled the domain Administration port, and overrode Local Administration Port for ms1.
The different port values are:
Administration Port = 9002
AdminServer (Listen Port = 7001, SSL Listen Port = 7002, Local Administration Port Override = 9002)
ms1 (Listen Port = 7011, SSL Listen Port = 7012, Local Administration Port Override = 9012)
Then I am able to start AdminServer from startWebLogic and it duly shows:
<Notice> <Server> <BEA-002613> <Channel "DefaultAdministration" is now listening on 127.0.0.1:9002 for protocols admin, ldaps, https.>
Also able to access the console at this point.
However then when I try to start ms1 using startManagedWebLogic.cmd ms1 https://127.0.0.1:9002 it is not able to connect to the admin server:
<Emergency> <Management> <BEA-141151> <The Administration Server could not be reached at https://127.0.0.1:9002.>
<Info> <Configuration Management> <BEA-150018> <This server is being started in Managed Server independence mode in the absence of the Administration Server.>
As mentioned before I am able to access the console from https://localhost:9002/console and netstat output shows:
TCP 127.0.0.1:9002 0.0.0.0:0 LISTENING
TCP 127.0.0.1:9002 127.0.0.1:3040 ESTABLISHED
TCP 127.0.0.1:9002 127.0.0.1:3042 ESTABLISHED
What could be the reason that while starting up ms1 is not able to connect to AdminServer on 9002? But all is fine when the administration port is not enabled.
Any help on this is much appreciated. Thanks!

Hello,
The problem still persists. I even tried changing a few of the port values and also the administration protocol to https from t3s but they didn't help.
This is how the config.xml looks now:
<server>
<name>AdminServer</name>
<ssl>
<enabled>true</enabled>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>true</hostname-verification-ignored>
<client-certificate-enforced>false</client-certificate-enforced>
<listen-port>7004</listen-port>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
</ssl>
<listen-port>7003</listen-port>
<listen-address>127.0.0.1</listen-address>
<administration-port>9003</administration-port>
</server>
<server>
<name>ms1</name>
<ssl>
<enabled>true</enabled>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>true</hostname-verification-ignored>
<client-certificate-enforced>false</client-certificate-enforced>
<listen-port>7012</listen-port>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
</ssl>
<machine xsi:nil="true"></machine>
<listen-port>7011</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address>127.0.0.1</listen-address>
<administration-port>9012</administration-port>
</server>
<administration-port-enabled>true</administration-port-enabled>
<administration-port>9003</administration-port>
<configuration-version>12.1.1.0</configuration-version>
<admin-server-name>AdminServer</admin-server-name>
<administration-protocol>https</administration-protocol>

Error: The e-mail server could not be reached when the system was trying to

Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MS

Hi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM

E-mail server could not be reached Error in Collaboration

Hi All,
I was trying to implement the collaboration feature - Send Email. I have configured email transport and have done the user mapping. When i click send email - it is throwing me the error
"E-mail server could not be reached, when system was trying to send the message"
The email service is active. The email channel is configured and the server is restarted.
Even the firewall is blocked. What could be the reason. I am able to send and receive mails from msoutook. what other configurations are required?
Please do help!
Thanks,
Divya

Hi Yusuf,
I have done that and still the same.
I have done the http proxy settings in visual admin. also tried blocking the firewall.
Am i missing some configurations?
Please do help in this issue.
Thanks,
Divya

E-mail server could not be reached when system was trying to send message

Hi All,
I have done the settings for mail transport. The same worked fine on development and QA. However, on production, the same settings do not seem to be working I receive message 'The e-mail server could not be reached when the system was trying to send the message', when mail is being sent out.
The settings is as follows:
1. Activate Mailing Service by going to
System Administration à System Configuration à Knowledge Management à Content Management à Mailing Service.
Ensure Active check box is selected.
2. Create System Alias by going to
System Administration à System Configuration à System Landscape
Go to content area.
Portal Content à Content Provided By SAP à Collaboration and right click.
Select New from PAR à System.
Choose the iview com.sap.netweaver.coll.app.gw and hit next button. Select Java_Mail option and hit next button. Enter appropriate System Name and ID and hit next button. Hit finsh button and open object for editing.
Select System Aliases from display option and add an alias for the system. Save changes.
3. Create Mail Transport by going to
System Administration à System Configuration à Knowledge Management à Collaboration.
   Click Groupware Transports in content area.
   Select Mail Transport on next screen.
   Click New button and create new mail transport definition.
   Give SMTP server being used in organisation, Inbox for Sent messages folder, and give
   system alias created in step 2 as alias.
4. Mail channel server too has been set up.
Thanks and regards,
Arun

Dear All,
I am trying to setup my SMTP mail in WAS7.0 SP4, my motto is to use this setting to send mail out from CAF GP (Approval Form).
I have given SMTP setting at
System Administration à System Configuration à Collaboration à Groupware Transports
System Administration à Universal Worklist & Workflow à workflow à Mail
Please tell me am in the correct part of configuration of mail or is that any other place to set configurations?
As our friend (Arun) mentioned in his first thread to activate Mailing Service, i couldnt see this setting in my WAS7.0.
+1. Activate Mailing Service by going to
System Administration à System Configuration à Knowledge Management à Content Management à Mailing Service.
Ensure Active check box is selected.+
Is there any other settings i am missing?
The error my CAF GP giving is "The system failed to send an e-mail notification to "
Your help is highly Applauded
Thanks! in advance.
Regards,
Kishore

Known Issue: "DNS server could not be reached" when creating or updating a RemoteApp collection using template images for some locales

When trying to create or update Azure RemoteApp collections that use a template image for some non-EN-US locales, it might fail with error "DNS server could not be reached". You might also see error code "DnsNotReachable".

Cause: There was a issue in Azure in which decimal punctuation was not treated properly if the locale of the template image used a comma (,) instead of a period (.).
Workaround: Before a fix was applied, the workaround was to use template images based on a locale that uses a period to delimit decimals, such as EN-US.
Resolution: As of March 19, 2015, a fix for this issue has been applied to Azure. You should once again be able to create collections from template images that use non-EN-US locales. If you continue to have this problem, please
try the workaround. If that works and the only difference in the template images is the locale, please email remoteappforum (at Microsoft). If the workaround does not work, the issue is likely caused by a DNS configuration issue such as:
No valid forwarders to public DNS servers configured on your internal DNS server(s).
A valid internal DNS server is not specified on your Azure RemoteApp VNet.
A VNet or internal network configuration issue is preventing the internal DNS servers from be reached by the VMs in the RemoteApp collection.

Error in apex report Ora-20001 The printng engine could not be reached

I created a report query. When I test it I got the following error.
Ora-20001 Report engine colud not find the requested url.

hi All,
i want to have Print Option Enabled on my Reports
i did as mentioned in the Document
Configuring Report Printing in a Full Development Environment
To configure the printing of reports in a full development environment:
1. Log in to Oracle Application Express Administration Services. See "Logging in to
Oracle Application Express Administration Services" on page 2-3.
2. Click Manage Service.
3. Under Manage Environment Settings, click Instance Settings.
4. Scroll down to Report Printing:
5. For Oracle BI Publisher, select one of the following:
– Standard Support - This is the default setting. Standard Support enables you
to print report regions and report queries using either the built-in templates
provided with Oracle Application Express or other XSL-FO compatible
formats you provide. This setting does not support RTF (rich text format).
Standard Support provides declarative formatting of report regions and report
queries with basic control over page attributes, including orientation, size,
column heading formats, page header, and page footer.
– Advanced Support - Requires a valid license of Oracle BI Publisher (also
known as Oracle XML Publisher). Advanced Support provides you with all
the capabilities of the Standard setting plus the ability to define RTF-based
report layouts developed using the BI Publisher Word Template Builder.
To learn more about installing and configuring Oracle BI Publisher, see PDF
Printing in Application Express 3.1. See:
6. For Print Server Protocol, select the protocol that the print server uses.
7. For Print Server Host Address, specify the host address of the print server engine.
8. For Print Server Port, define the port of the print server engine. By default, this is
set to 8888 when the report server is installed.
9. For Print Server Script, define the script that is the print server engine. The default
setting is:
/xmlpserver/convert
10. Click Apply Change
After Configuring the Print Option,
i am having Oracle 10g Releae2 on Hp- Unix, and Apex 3.1
i didnt Install Oracle BI publisher
i want to Enable Print Option on my Reports
when i try to give the Print a Report
i am getting the Below Error
<div id="report_7026503216111526_catch"></div><pre>report error:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.</pre>
please Help me out
Many thanks

ORA-20001: The printing engine could not be reached because either the URL

Hi all,
created a report and tried to have a pdf report
using this link
http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm
when i did a sample with apex.oracle.com
it is working fine.
but in my site
when i click the print button i am getting an error
<div id="report_4897903101326173_catch"></div><pre>report error:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.</pre>
Using : Oracle-Application-Server-10g/9.0.4.0.0 .
Oracle-HTTP-Server.
I am working on Remote server. How to find whether the printserver is configured or not?
Is there any query to check it out?
can any one please help? I really need to get this work.
bye
Srikavi

hi guys . i have the same problem and i dont know how to fix it . I use APEX on my PC and i just install BI Publisher 10.1.3.2.1 and made the settings in APEX as follows:
Print Server : Advanced (requires BI Publ...)
Print Server Protocol: HTTP
Print Server Host Address: http://192.168.1.2/ ---> IS THIS MY HOST ? when i start the BI Publisher Server the address is" http://192.168.1.2:9704/xmlpserver"
Print Server Port :9704
Print Server Script: /xmlpserver/convert
Now when i click PRINT and choose to open or save it on my pc inside the document ( word/html ) it gives me error "ORA-20001: The printing engine could not be reached because either...".if its PDF i can open it becouse of some problem.Sorry for my english i hope you uderstand what im trying to say.thx in advance

My phone keeps saying Activation server could not be reached or activation request could not be completed. What do i do?

I restored phone, and it still doesnt show any settings,aps etc, and it started like it was going to let me set it up, went thru English, United states, then Wifi, entered wifi info and then it says please wait while we activate and then it goes back to saying can not activate or activation server could not be reached, the diagnostics i run on it while synced with the computer comes back fine that it detects phone,etc. What can i do now?

YOu should ask your family friend. The message you get about activation server being unvailable usually indicates a hacked or jailbroken phone.
only the carrier that the phone is locked to can unlock the phone.

The admin server could not be reached

Similar Messages

Maybe you are looking for