"The AIM proxy refused the connection."

Using terminal, I create a SSH tunnel to my computer when I'm out of the house. On my mac, I have a Network Location set up with a SOCKS proxy on 127.0.0.1:9999. This set up works in almost every application I have tried it with: Safari, Mail.app, Camino, Firefox, Adium, etc.
However, it does not work with iChat 4.0. For my AIM account preferences, I check the "Connect using proxy" box. Then when I try to connect to AIM, I get the following error message.
"The AIM proxy refused the connection. Check the proxy information in the Accounts section of iChat preferences."
In the preferences, I have tried both the "Use System Preferences" option as well as manually specifying the proxy. Both give the error message.
Am I missing an iChat-specific step somewhere?

Yes, have tried both the iChat (Server Settings, Connect using Proxy) settings and also the system-wide proxy settings. Neither works, immediately reports the "refused" connection. Note tested this does indeed work with Adium, but of course would rather use iChat.
Also there is a vague reference to iChat bug being fixed in 10.5.2 in this engadget article:
http://www.engadget.com/2007/12/19/mac-os-x-10-5-2-is-packing-hefty-fixes-due-ja nuary-ish/2
"- Resolved issue with local SOCKS proxy and iChat" ??? Can Apple elaborate on the referenced fix and determine if it is related to this problem? Or is there a link you can provide which describes the bug fix?
Thanks!
Message was edited by: madpacket

Similar Messages

Since installation of last 4.0b12 version, I'm unable to connect to any https site through a proxy. Connection works if no proxy is involved, with proxy I receive a message like "proxy refuses the connection". Thank you for your answer

I'm connected to a customer's network and I have to use a proxy.
I correctly authenticate myself to the proxy and I try to access https://mail.google.com.
I receive a message that the proxy refuses the connection.
I noticed that this happens with all the https sites.
If I connect with my mobile internet key without proxy, I'm able to connect: the combination of proxy and https is failing.
Other computers on the same network with different browsers can connect to https through the proxy.

I'm working with the Firefox development team on this one. As far as I can tell, they seem to think that there are 2-3 different problems with the same/very similar symptoms, all involving proxies. They think they've fixed them all for RC1.
Right now, it looks like we just want people to test an early build.
You can get that here:
[http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/2011-03-03-12-mozilla-central/firefox-4.0b13pre.en-US.win32.installer.exe]
Install that somewhere (not in your current install directory), quit all open Firefox instances and try it. Let me know if it works.

"The host refused the connection" error all of the sudden???

I was working with an iMac G5 2GHz with 1.5GB RAM and OSX.4.6 with iChatAV 3.1.4. I use an AEBS for my network but the iMac is plugged directly into the AEBS. I use Verizon FIOS. My internet connection has been flawless.
After using Drive Genius 1.2 to repair, repair permissions, then rebuild my internal hard drive (booted from external FW HD and ran app from there) I have been getting recurrent and random iChat messages that "the host refused the connection" and tells me to try later. I have an AIM account logged in that was previously working fine. About 1.5 years of iChatting with the account and NEVER received this message. Now I get it several times a day if I try to shut down and restart the program.
Just used Migration Assistant last night to transfer iMac G5 to my new iMac Intel (which is insanely fast, BTW, and I really like that! . I'm continuing to get this message over and over. I can connect one second, disconnect and try again, then get the message of refusal to connect again!?!? I tried deleting the Users>UserName>Library>Prefs>com.apple.ichat.AIM pref but did nothing to help.
Any suggestions on why this is happening and how to fix it?

Hey Ralph,
Have you actually Quit iChat and restared it during
any of this ?
Yes, I have quit ichat and restarted a few times. When it tries to automatically log in, it doesn't. When I use the menu or Apple + L or change my online status to available, it works about 85% of the time.
Have you restarted the computer ?
Yes, I had to when my machine had gone into sleep mode. Wouldn't reconnect to AOL server until i did restart.
So as far as you are aware the Modem is not doing
Port Forwarding to an IP (Hopefully your computer )
on your LAN for the iChat ports ?
I'm not exactly sure of everything you have asked but as I haven't changed any settings on my Modem since it was installed in November, I'm fairly certain it isn't Port Forwarding...BUT I'm not sure what that means. In other words, I haven't changed anything but my own computer and that has just been updates and altering energy saver mode, other working etc. I thought it had to do with the Energy Saving mode because I turned that off temporarily while I was working on something and it's the most recent variable change I can think of. I had no software updates since 5-17 before this weekend and that was a Security Update.
Am I making sense?
I'm beginning to wonder if it's something with the AOL server....
8:39 PM Wednesday; June 7, 2006

DPM failing SQL backups due to error: "the SQL Server instance refused a connection to the protection agent. (ID 30172 Details: Internal error code: 0x80990F85)

I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O.  I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name:      Application
Source:        MSDPM
Date:          6/13/2011 1:09:12 AM
Event ID:      4223
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSDPM" />
    <EventID Qualifiers="0">4223</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
    <EventRecordID>68785</EventRecordID>
    <Channel>Application</Channel>
    <Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
    <Security />
</System>
<EventData>
    <Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
    <Binary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inary>
</EventData>
</Event>
Any help would be greatly appreciated!

Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress.

A network error when i tested the connection of a proxy user

Good evening
I 'd created a 3 appliances Filer system . Filer 1.1.0.653
The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
Every thing seems well. I could inport AD users, create filr users, and work ...
But when i want to create a NetFolder server, impossible to pass the connection test
Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
or
Name : Administrateur
or
Name = arcdom\Administrateur
Click on test connection => an network error occurs
I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
The Novell-FAMT is running. (I tried to restart it without succes)
Help .......
LP Irovetz

Originally Posted by LPIROVETZ
Good evening
I 'd created a 3 appliances Filer system . Filer 1.1.0.653
The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
Every thing seems well. I could inport AD users, create filr users, and work ...
But when i want to create a NetFolder server, impossible to pass the connection test
Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
or
Name : Administrateur
or
Name = arcdom\Administrateur
Click on test connection => an network error occurs
I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
The Novell-FAMT is running. (I tried to restart it without succes)
Help .......
LP Irovetz
From the docu:
Click the Authentication tab, then specify the following information:
Proxy name and password: Specify the fully qualified, comma-delimited name and password for the proxy user used to access the OES, NetWare or Windows, server. (You can use the Browse icon next to the Proxy field to browse the LDAP directory for the proxy user that you want to use.)
IMPORTANT:Before you specify a proxy name and password for the Net Folder server, ensure that you review the information in Section 8.1.2, Planning the Net Folder Server Proxy User.
Test connection: Click this button to ensure that the path is accurate and that the credentials are valid, then click OK after the test succeeds.
Sometimes proxy users with the incorrect context pass this test. Ensure that the context for your proxy user is correct, as described in Expected Name Format for File Servers.
Authentication type: Select the authentication service for the file server that you are connecting to. This option corresponds with the Server type setting that you selected on the Configuration tab. If you selected OES or NetWare as the server type, only Novell NMAS is available as the authentication type. If you selected Windows as the server type, you can select either Kerberos, NTLM, or Auto detect as the authentication type. (Auto detect means that it tries authenticating with Kerberos first, and if that fails, authenticates with NTLM.)
NOTE:If Kerberos is selected as the authentication type, ensure that the DNS name server is able to resolve DNS queries for the Active Directory domains.
If the Kerberos port (port 88) is disabled on the Windows server, select NTLM as the authentication type.
So you should use comma delimited name for the username... Did you also try browsing for the user using the icon there?
Does is log any specific error message in /opt/novell/filr/apache-tomcat/logs/appserver.log file when you try to test the connection?
Thomas

Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

Some websites say that the connection reset, but after following the instructions to fix it, it still doesn't work, and recently they simply refuse to load.

Recently, Mozilla has refused to load certain webpages for me, saying that 'the connection was reset' or sometimes not loading at all. I don't know what's wrong and if it's just me. So far, I've had problems getting onto Random.org, Serenes Forest.net (which actually didn't load a few times), and Dictionary.com. Is there something wrong with my internet, and if there is, what? And why does this happen? (I don't have wireless internet, if that helps deduce the problem.)
I know that maybe this sounds like something that doesn't have to do with Firefox, but Firefox never did this before, and my computer has always worked fine before, so I think maybe something happened to my Firefox that's corrupted it in some way. Has a problem like this come up before, and if so, was it already solved?

If you are using wi-fi:
1- Are you connected?
2- Check if you have full access or only limited access, limited means no internet connection provided. (if so, proceed step 3)
3- Ping your wi-fi modem IP address:
ping 192.168.2.1 (my modem local IP Address)
If you get high number in round trip time (in miliseconds), turn off your modem for about 1 minute.
3- ping any site that did not load
Wish it may help

Error in Ultra Search in portal. listener refused the connection

hi
I implement a portal.I wanted to use ultra search(portlet) in my pages. so I defined an user and graned access to him. I created a provider for ultra saerch and schedule too. then add ultrasearch in page. it worked currectly but now give an errr such this :
oracle.ultrasearch.query.SearchException: WKG17005: connection failure: Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor The Connection descriptor used by the client was: //IP Server:1521/ORCL
How can I solve this problem?
please help me

Went to the control panel administrative tool and services
After I did that I got this error Failure Io exception The Network Adapter could not establish the connection
Also, I got this in the command prompt
lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 07-JUL-2012 15:35
:19
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=co-67349b991dc4)(PORT=15
21)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 07-JUL-2012 15:37
:41
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Failed to start service, error 1053.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 07-JUL-2012 15:40
:27
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=co-67349b991dc4)(PORT=15
21)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error

I have an ipad and it's been refusing to connect to the wifi lately no matter where I go, anyone know how I can fix it?

I have an ipad and it's been refusing to connect to the wifi lately no matter where I go,
it used to work and then all of a sudden it wont.
i type in the password and it comes up with 'unable to connect to wifi'
anyone know how I can fix it?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Java.sql.SQLException: Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor

Good Day,
I'm encountering this problem
     java.sql.SQLException: Listener refused the connection with the following error:
     ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
here's the java code
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
String url = "jdbc:oracle:thin:@//10.143.85.21/UCSL";
String userName = "mssoriano";
String passWord = "mssoriano_4319";
conn = DriverManager.getConnection(url, userName, passWord);
and here's my tnsnames.ora
UCSL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.143.85.21)(PORT = 1521))
    (CONNECT_DATA =
      (SID = psusldb11)
Please do let me know if what may the cause of the problem and how to solve this. Thank you and God bless.

Hi,
see this example
Connect to Oracle DB via JDBC driver
Frank

Facebook and Twitter are refusing the connection

Hey there,
for two days I'm using Mavericks now (I came from a windows-PC) and I just wanted to add my facebook- and twitter-accounts to the "Internetaccounts" (I don't know if they're called this way in the english OS, therefore I`m sorry if not). But they refuse to connect and keep saying that my username or password couldn't be checked, as you may see here http://i.imgur.com/CoQkhRp.jpg (sorry for the german, again)
There are no typos in the usernames or passwords, I even get Messages of facebook, that the macbook is accessing my account, but the macbook keeps refusing the connection.
I hope anyone could help me

Same problem here. Read on another thread to update Java, but that didn't work either. Seems like a bug only affecting some installs. Do you have a kernal panic when you click the Share button in Safari? Can't seem to figure it out and seems we are waiting on an update...

Database: Listener refused the connection -please help

middlegen:
[middlegen] Database URL:jdbc:oracle:thin:@localhost:1521:PUSSDB
BUILD FAILED
C:\cvs-1-11-17\middlegen\samples\build.xml:232: middlegen.MiddlegenException: Couldn't connect to database: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:PUSSDB
Total time: 8 seconds
C:\cvs-1-11-17\middlegen\samples>

Did you try a tnsping to see if it can provide name resolution? Can you connect to the database using the connect string service name such as sys@pussdb? These would indicate whether the database has been properly defined in your databse names resolution method (e.g. tnsnames).

OBIEE 11G - The database Weblogic is trying to connect to is refusing the connection.

Hi,
The database Weblogic is trying to connect to is refusing the connection, per my error messages. Which file will have the JDBC connection information?
Thanks for your time and help.

Can u paste the error log messages?

Error 10061 refused the connection

The error 10061 connection refused appear me trying to connect 2 applications in the same machine. I switched off the firewall for testing but there were no difference. The OS is W008 64bit. What could be the problem? Thank you in advance

hi,
Please refer to the articles below to get more information about this error:
http://social.technet.microsoft.com/Forums/forefront/en-US/f2f4eea6-a020-4837-90c9-b5bc0a555513/error-code-10061-connection-refused-when-connecting-to-websites?forum=Forefrontedgefirewall
http://www.chicagotech.net/msapps/isa2.htm
http://forums.isaserver.org/Error_Code_10061%3A_Connection_refused/m_2002027419/tm.htm
Best Regards
Quan Gu

Listener refused the connection....

Hi guys...recently I install oracle 10g, before that I was installed oracle 8i. When I setup ora 10g, I have no problem with it. When I try to access the enterprise manager, then it show this error...
"Listener refused the connection with the following error: ORA-12500, TNS:listener failed to start a dedicated server process The Connection descriptor used by the client was: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=serverbasdat)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=attache))) "
I hope you could help me how to fix this problem. I think this problem happen related with the tns listener for the new oracle 10g. I was try to reconfigure the port,but that's didn't work.
Regards,
Eri

oerr ora 1250012500, 00000, "TNS:listener failed to start a dedicated server process"
// *Cause: The process of starting up a dedicated server process failed.
// The executable could not be found or the environment may be set up
// incorrectly.
// *Action: Turn on tracing at the ADMIN level and reexecute the operation.
// Verify that the ORACLE Server executable is present and has execute
// permissions enabled. Ensure that the ORACLE environment is specified
// correctly in LISTENER.ORA. The Oracle Protocol Adapter that is being
// called may not be installed on the local hard drive. Please check that
// the correct Protocol Adapter are successfully linked.
// If error persists, contact Oracle Customer Support.
Did you check you environment?? If you running both 8i and 10g then make sure all the oracle relace env variables are set properlr for 10g. In PATH also 10g should come before 8i.
Daljit Singh

"The AIM proxy refused the connection."

Similar Messages

Maybe you are looking for