The alarm (as of iOS 7.0.2) does not go off when in vibrate mode
I have recently upgraded my iPhone 4S to iOS 7.0.2, and when the phone is in vibrate mode the alarms do not sound. Instead the phone just vibrates which does not help.
The point is to silence the phone for the night, as I don't want to hear incoming calls and texts, but I do expect the alarm to go off with sound in the morning. The alarm becomes completely useless otherwise.
Has anyone else experienced this, and is there some hidden new setting I'm unaware of to control this new behavior?
My alarm still sounds even if the phone is on mute. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?
Until you get the issue resolved, have you tried using Do Not Disturb instead of putting the phone on mute? The alarm should sound when DND is set.
Best of luck.
Similar Messages
-
Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACBOOK GETS TOO HOT WHEN I CLOSE THE SCREEN BECAUSE OF THIS ISSUE!!!! FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!! This only happens when it is plugged in!!!!! Any way to fix this? Help.. :-( Please!!!!!!!! The light stays solid when plugged in on sleep mode!!! This *****. Help..
I figured it out! I don't fully understand why, but when I uninstall ESPOINAGE 2 from my laptop, sleep works fine now.. Weird!
-
So my iphone 4 is about 2 years old. Whenever I receive a message, my phone does not vibrate or make a sound. This happens even when my phone is not on silent, I dont know why this has happened. However when I receive a call, my phone goes off. I dont know why this happens. Am i the only one that's experienced this?
Yes i have, and its all set to be fine. When my phone is unlocked all the sounds work, it's only when it is locked
-
THe sync key supplied to me by firefox does not match account when I tried to reload firefox.
I needed to reload my firefox browser. I was using sync before and I wanted to use it to reload my bookmarks ...etc... I loaded the add-on, ran setup, entered my account name and password, set up then requested sync key. I saved the html when i recieved origional key. sync setup tells me it is wrong key... i can change sync key but I lose all info in my account.. what to do?
When you cleared your history, did you select Cookies and/or Active Logins and clear those? That could explain why you are not automatically logged in.
I have not used the Zimbra mail server. However, generally speaking, when you are using webmail, you usually do not need to enter a mail server name. Usually you just have to login.
Where does the site stop working for you. Can you log in and get to the next page, or does it require you to keep trying to log in? Can you view the Inbox? Can you open individual messages? Et cetera. -
I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?
stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad? -
Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopelessIf you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.
-
My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
while up-grading the IOS 6 to my iphone, the up-grade stop and now my screen does not stop to sart (apple) than shut down than restart (apple scree,) than shut down again
If restoring the phone as new did not solve your problem, you'll need to bring the phone to Apple for evaluation.
-
The new upgrade for IOS 7.9.6 will not download on my IPad Air or 4S phone. Why?
old golfer711 wrote:
On the phone download and install can't be highlighted.
Is there a message underneath the Download and Install button?
On the iPad it starts to download then says error.
More specific, please. What error? -
Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone
Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage.
-
My iphone 5 in ios 6.1.4 does not have facetime
my iphone 5 in ios 6.1.4 does not have facetime, in call or settings. not have icon facetime in anywhere,, please heeelp,
ramin6007 wrote:
look, when i make a call, the facetime icon must be show it in there with mute and keypad and speakers and others.... , but there is no facetime icon on there, you think this is problme in ios 6.1.4?
NO. It is a problem caused by the fact that the phone came from a country where FaceTime is illegal, as you have been told several times. There is no way to add FaceTime. -
I Have an iPad mini running iOS 7.1.2, I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list. It does not show up when I search for it so can't open t that way either. It doesn't require iOS 8. Can't delete and reinstall, cause not icon. This is not a normal "app won't open" question. it doesn't start the. Stop it just doesn't seem to exist. Any help is appreciated
Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D. -
When I connect my iPhone to my PC it is not recognised and iTunes does not open. When I connect my iPod to the same PC everything works perfectly. I conclude that the problem is not on the PC or with iTunes. Switching off and rebooting the iPhone and the PC does not fix the problem. Any suggestions??
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
when the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact,when the app in background ,the app need data update to make the function of trajectory replay come ture。in fact, we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode,we are confused,does anyone can help me,i still don't know why do review team can't find the data update when the app is in background and how do i modify the app,or what is the really problem they refered,do i misunderstand them?
the blow is the content of the review team email:
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.
-
Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom
Maybe you are looking for
-
I just upgraded from Lightroom 3 to 4.3. I'm trying to "edit in Photoshop" which is not greyed out. Photoshop opens successfully but the image from Lightroom never launches. Is there something I need to enable to allow the photo to open?? Help!
-
Connect to the Database using TOAD
Hi I've installed 11.5.10.2 on and using DB 9.2.0.6.0 on Redhat 4 everything works ok. but when i try to connect to TOAD i get this error ORA-12537 TNS:connection closed. do i have to do any setup's? please help. Thanks
-
JMS Sender & Receiver on different machines
hi all! how do you set this up? let's say i have apps set up on two machines, one is for sending messages, the other for receiving. do i need to install & run MQ on both? or is there no need to install MQ on both machines and just have both point to
-
Missing nilvaiu.dll when deploying VI
Hi, I have a problem when trying to deploy a .VI to my cRIO 9082. The .VI is to control the velocity of a DC engine (KOLLMORGEN) through a servo drive. However, whenever i try to deploy the VI i get the error message as follows: LabVIEW: Failed to lo
-
I have just encountered an error on a WCS I look after. The WCS is running on a Windows 2003 server, I went to log in yesterday and got an Apache error saying "Service Temporarily Unavailable" I suspected some work was probably being done on server s