The all CUSTOMER_REL records are stoped because of one record

Hi,
I am running CUSTOMER_REL to maintain the customer/sales representative relationship in CRM.
The problem is that in R/3 I have some relationships with sales representatives that are not active anymore, so when I downloaded HR to CRM, those sales representatives weren't create in CRM.
Now, when I run CUSTOMER_REL, the records that are related to old sales representatives get SYSFAIL in CRM inbound queue "A business partner cannot be determined for personnel number &1" and the other customer rel records are not processed. I need to delete the error inbound queue, in order to the following inbound queues get processed.
Is there any way to prevent the other queue of being stopped if a error of this kind happens for another record?
Note: my CUSTOMER_REL has block size 1.
Thanks a lot!
Susana Messias

hi Susana,
I have the same problem now. Did you manage to solve the problem?
If so have you increased the block size?
Thanks
Tamas

Similar Messages

  • I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up und one account.

    I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up under one account.

    You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

  • I accidently closed my window with all my app tabs, now the only window that opens was a 2nd one I had open. How do I get back all my app tabs from the previous window, and why didn't it give me the usual warning you are closing more than one tab?

    I accidently closed the window with all my frequently used app tabs, now the only window that opens was an extra one I had opened. How do I get back all my app tabs from the previous window, and why didn't it give me the usual warning you are closing more than one tab? edit
    Details

    Then the (App) tabs from that window are lost unless you can restore an older copy of the sessionstore.js file (Time Machine?) that has that lost window.
    *http://kb.mozillazine.org/sessionstore.js

  • Dowloaded After Effects and says its up to date but there is no trace of it being anywhere on my computer. All other Softwares are there, except that one. Can't re-dowload it. Help Please!

    Dowloaded After Effects and says its up to date but there is no trace of it being anywhere on my computer. All other Softwares are there, except that one. Can't re-dowload it. Help Please!

    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 Do as Mylenium told you. If you don't know where it is. Go to www.adobe.com, sign in, search for the cc cleaner tool downloader and it should fix the issues. Have you went into your control panel, under programs and features and removed it from there?

  • We connected 2 iphones to a single ipad.  now the 2 iphone accounts are messed up.  One phone is always getting update notices for apps that are not wanted on that phone, but on the other phone

    We connected 2 iphones to a single ipad.  now the 2 iphone accounts are messed up.  One phone is always getting update notices for apps that are not wanted on that phone, but on the other phone

    rdpn wrote:
    We connected 2 iphones to a single ipad.  now the 2 iphone accounts are messed up.  One phone is always getting update notices for apps that are not wanted on that phone, but on the other phone
    How did you do that?  Do you mean you sync to iTunes that had the ipad library?
    The phone with the issue, settings - general - reset - erase all contents and settings - this will wipe the phone clean and then restore from your backup.

  • Items in the Itunes library were not copied because of one or two errors occurred. How to fix this problem?

    Items in the Itunes library were not copied because of one or two errors occurred. How to fix this problem?

    Hello mobyash,
    Have you tried converting each of these 8 tracks to a different file format and seeing if they will then sync to your iPod.  See this Apple support document for information and instructions on how to convert a song to a different format.
    iTunes: How to convert a song to a different file format
    B-rock

  • In my Macbook Pro finder folder under All Images, there are duplicate files, but one is small and the other is full size. I wanted to clean up the files, but don't know why I have two of everything. Any Ideas?

    In my Macbook Pro, the Finder folder has duplicate images in the 'all images' file. One image is small and the other is full size. First question is why do I have two of every image? Why is one small and the other large. Do I need two of everything? If not, which do I delete?
    thanks, Jean

    Hello fane,
    Re: duplicate images in finder.
    Nearly all images are JPG with a few GIF and PNG sprinkled in.
    I opened the inspector so I do get info when opening each image, but it a slow process.
    It seems that one image is around 70k while its twin can be up to 4Mb which is what comes unedited from my camera. Sometimes there will be 3 or 4 identical images in finder, but when I open iPhoto to see what ‘s really in the file, I find only one image, and it’s full sized.
    Are all these extra images, even if they are aliases, taking up space on my drive? And should I delete them? The info bar says I have over 10,000 images, which is rather a lot  for what I do.
    I am unable to add the file size on the view menu as it is grayed out. Don’t know why it’s gray, but having that info on the screen would save a lot of time and fiddling with each image.
    I am trying to resize selected pix so I can upload them to e-bay, which requires less than 70k. I have looked at resizing programs but most are for PC platform and not Mac, so I am trying to resize in the finder window under tools. Tedious at best. Any suggestions will be appreciated
    Thanks for your help,
    jeanfromwilsonville

  • In the calendar day view the all day events are all squished up at the top any ideas how to fix that ?

    this is something new with the new OS system
    thanks

    More than likely, especially since hot chocolate is a sticky solution, it has gummed up the headphone port. There is something in there that senses that the headphones are plugged in. You can try to clean it out with maybe a small round toothpick, but it might not be fixable. You may have to make an appointment with the Genius at the Apple store and see about an out of warranty replacement. User damage, including liquid damage is not covered under the warranty.

  • When buying a book bundle, are all the books separate or are they put into one huge book?

    iBook Bundles

    Hi Ronald,
    It seems the thumbnails are messed up. Try a rebuild of thumbnails and see if it solves the problem.
    Try this:
    Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
    Close iPhoto
    Duplicate the iPhoto Library folder
    Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
    Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
    Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
    Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
    You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
    This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.

  • When I connect my Mac to my Smart TV I can only get the desktop screen to appear and not what I wish to play on the screen. What am I doing wrong? I know the TV and Mac are connected because of the desktop screen appearing.

    I would appreciate any help anyone can provide.  I need to know how to get what I wish to watch on the TV, such as Netflix, and not just the desktop screen.  Thank you

    You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
    In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
    The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
    You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
    Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

  • All my photos are now in just one event - how do I get them back?

    Hi all,
    New to iLife '08, just getting used to the new iPhoto and iMovie. Was trying to backup photos to an external hard drive (and I now realise doing it a stupid way) when it all went a bit wrong - think something went wrong with the external hard drive rather than macbook - and had to force quite and so on.
    Wasn't too worried as I do already have a back up of everything, its just all in different places (so was trying to make one backup of everything), but when i opened iPhoto again all the events were gone.
    All my photos appear to be there, but they're just in one event folder, which is kind of annoying. can anyone tell me the easiest way to fix this? Tried using the Autosplit Events thing but that splits everything into days, which isn't the way it was divided. Is there any way of getting them back to the way they were without going through it all manually and renaming and moving things? If I browse the files using finder (and Show Package Contents) they're all divided into the different folders they were in originally and the way I'd like them to be split into events, so I don't really understand. Any hints?
    Apologies for the extended post.
    Thanks!

    idubois
    Welcome to the Apple Discussions.
    If I browse the files using finder (and Show Package Contents) they're all divided into the different folders they were in originally and the way I'd like them to be split into events, so I don't really understand. Any hints?
    Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the existing file.
    or try
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Regards
    TD

  • All flash videos are working except this one!?

    Tonight a friend of mine tried to watch this video: http://www.globalmaritimes.com/video/index.html
    But, it will not work on her Vista laptop. So I tried everything, I uninstalled flash, reinstalled it, changed various internet settings, etc. I tried IE 7, and firefox but it doesn't matter the video will not work. Yet on my laptop running Ubuntu, this video loads fine in firefox. Is there any suggestions on what is going on? The strange thing is, that all other videos such as youtube will work on her computer just not this ONE video. I'm losing my mind here so any help would be appreciated!

    Hi
    First of all dude...I have read everuthing closely.
    But writing this ONE without any link, will do me no good.
    And keeping referring to a link WITHOUT the actual link is not
    helping a bit..
    I have tried several random clips without a hitch.
    Furthermore, you clearly state, that you've installed
    Flash 10.1 BETA...That's not the release version..That's
    the beta. So giving me a *SIGH*, won't do you any good since
    I'm not to blame here.
    I'm not a computer illiterate, I've been programming since I was 13.
    It clearly depends on your current age.
    Anyway.. You figure it out on your own now.
    My help is hereby terminated.

  • Iphone not syncing music from itunes. all other devices are, it's just one iphone on my account

    I'm having an issue syncing one iphone with my itunes account. I have several other iphones and an ipod that will sync just fine. I am running Windows 8. There was a glitch earlier when the new ios came out that was resolved and everything was working fine... now this one phone is not syncing. The music is showing up but when you hit play it just skips through.

    http://support.apple.com/kb/TS2830

  • Can I use multiple values for a rollup key on the same Endeca record?

    We have a business need to to aggregate our records using different criteria, based on user navigation. We are thinking of using a rollup key with multiple values to help with the aggregation, but we are running into some issues.
    Here is a made-up xample of what we want to do: assume we have a group of products and these products can be organized into groups using parent-child relationships. We would like to create an aggregate record for each parent, and we want the aggregate record for each parent to include all the children for the parent. To achieve this, we use a field called "parent_rec_spec" that holds the parent record spec and we set the same value on the field for the parent and its children. When we do rollup using the parent_rec_spec as the rollup key, we are able to see one aggregate record for each parent (with its children).
    The previous setup worked perfectly for us so far. But now we are getting a business requirement that allows children nodes to be linked to multiple parents at the same time. We were hoping of using another dimension to limit the records based on user roles/characteristics , so that only applicable parents/children are displayed (for example, we can use "market" as an additional filtering property, and we decide to show all parents/children for "North America", while hiding the parents/children for other markets).
    This caused an odd behavior when children are linked to multiple parents. For example, assume that SKUs A and B were linked to parents in "North America" and "Europe" at the same time, and assume that the user chose the "North America" market. The navigation state would eliminate the parents/children that are no in North America, and will also cause the parents/children that are labeled for North America to show up and be aggregated correctly. This however will lead to the creation of additional aggregate records for the A and B using the parent_rec_spec values that would have linked them to the Europe parents (even though the parents are hidden away).
    Here is an example index file that we used to load the test data:
    Update||1
    Market||North America
    Record Type||Product
    Name||Parent 1
    rec_spec||P1
    parent_rec_spec||P1
    EOR
    Update||1
    Market||Europe
    Record Type||Product
    Name||Parent 2
    rec_spec||P2
    parent_rec_spec||P2
    EOR
    Update||1
    Market||North America
    Record Type||Product
    Name||Child A
    rec_spec||A
    parent_rec_spec||P1
    EOR
    Update||1
    Market||North America
    Market||Europe
    Record Type||Product
    Name||Child B
    rec_spec||B
    parent_rec_spec||P1
    parent_rec_spec||P2
    EOR
    Update||1
    Market||North America
    Market||Europe
    Record Type||Product
    Name||Child C
    rec_spec||C
    parent_rec_spec||P1
    parent_rec_spec||P2
    EOR
    Update||1
    Market||Europe
    Record Type||Product
    Name||Child D
    rec_spec||D
    parent_rec_spec||P2
    EOR
    In this setup, we have parent P1 marked for North America with children A, B and C, and parent P2 marked for Europe with B, C and D as children. When we use North America as a filter in the navigation state, and parent_rec_spec as the rollup key, then we will see an aggregate record for P1, A, B and C. But we will also see an aggregate record for B and C by itself (presumably because of the other parent_rec_spec value on these records).
    The actual data that we are testing with is more complicated, but the end result is similar. We also noticed that the additional aggregate records would not be created always, depending on the ordering of the records.
    The question that I need help with is this: is there a way to fine tune the rollup logic so that it can only include certain records (in the example above, we can change the rec_spec from PA and PB to PA_North_America and PB_Europe and then we would be interested in rolling up using values that end with NorthAmerica).
    By the way, we considered using separate rollup keys for each context (like parent_rec_spec_north_america and parent_rec_spec_europe), but the number of contexts is dynamic, and might grow large. So it is not easy for us to create the additional properties on the fly, and we are concerned about the possible large number of dimensions.

    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=2&threadid=1157850

  • How can we get the location from location area code?

    Hi All,
    i have an application which successfully runs on Motorola L6 and it gives me the cell-id, Location area code, and Mobile Network Code, and Mobile Country Code. Now I want to know how can I get the location ( I mean the name of the location) through location area code. And one more thing can we get current MNC and current MCC through j2me because I have written a code for getting this information for sony ericsson cells but dont have a handset to try out. Anyway if anyone has the information then please let me know
    Thanks in advance
    Sunil

    I donot think you have a direct blog..
    check this blog for java proxies ..
    /people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
    AND CONFIGURE A RFC..

Maybe you are looking for