The all windows feature is not functioning properly

When I used the all windows feature ( via gesture, hot corner, or key (F3)) only the minimized windows are represented. The open windows are faded to the background, all of them. It seems to work when the computer first starts up.
I honestly have no clue what sparked this issue.
Any Ideas?
And has anyone else had this issue?

Hi Raj
The error "The SSL support feature is not properly configured. Https is not available" will not cause any problems for you during synchronization. The reason that this error is displayed is due to the fact that by default MI is configured to support HTTPS Synchronization and not HTTP. This is because it is recommeded to use HTTPS sync inorder to transmit data in a secure manner and this is very necessary in customer production system. This so called error will not have any impact on sync but is just an information to the administrator. This can be disabled by the use of parameter MobileEngine.Security.SSLSupport=false but make sure that this parameter is set to false even before performing the first sync i.e before obtaining a device id. If you set this value to false after performing some syncs, the error is still visibile in either the Web Console or the NetWeaver Administrator because it would have been sent by the previous sync and these statments are retained and never purged. Hope this helps and clarifies your doubts.
Best Regards
Sivakumar

Similar Messages

I've been using FCP 7 on my iMac for quite some time with great success. Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug) I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years. I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

YOU ARE A LIFE SAVER! I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

How do I get the Project Window of iMovie '11 functioning properly?

The scrubber in the Project Window runs painfully slow. It has to think about literally every movement, but if I just hit Play it will run smoothly. The scrubber in the Event Window also works fine. I had thought it was because I didn't have enough space in the Startup Disk, but I've cleared it out and nothing's changed.

If you had iMovie 9 and upgraded to Mavericks, iMovie 9 should still be in your Applications folder in a folder called imovie 9.0.9. You can still use it and your Events and projects folders should still be present.
Geoff.

HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen. Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.

This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

It's a 3rd party app. You really should contact Adobe Support and/or post in the Adobe Forums
Mac OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

Hi there, Fn + F1 to F12 special features are not working properly in bootcamp Windows

Hi there, I m just wondering recently my keyboard special features keys are not working properly(fn F1 to F12). Is there any solutions for this?? For example I cant switch the brightness with fn F1.. THis is so troublesome.... Please help! thanks
This was working fine in the early stage until recently which is not functioned properly.. ANy way to fix this up?? Thanks!

I had tried them...but its all good now... Guess RegPro must be delete my bootcamp item..So I just redownload them n reinstall...all back to normal!...THANKS!

The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!

The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!

OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
1. Powered off my MacBook and removed everything connected except for the power chord.
2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
Just added another couple of years usage with my aging mac :-)

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

The SSL support feature is not properly configured. Https is not available.

Hi all
We get the following warning message even though we are not using SSL.
"The SSL support feature is not properly configured. Https is not available."
I tried with the following parameter set to false in the MobileEngine.config, still the same warning occurs for each synchronization done. But the sync works fine.
MobileEngine.Security.SSLSupport=false
Had any body come accross this one, if so please let me know.
Thanks
Raj

Hi Raj
The error "The SSL support feature is not properly configured. Https is not available" will not cause any problems for you during synchronization. The reason that this error is displayed is due to the fact that by default MI is configured to support HTTPS Synchronization and not HTTP. This is because it is recommeded to use HTTPS sync inorder to transmit data in a secure manner and this is very necessary in customer production system. This so called error will not have any impact on sync but is just an information to the administrator. This can be disabled by the use of parameter MobileEngine.Security.SSLSupport=false but make sure that this parameter is set to false even before performing the first sync i.e before obtaining a device id. If you set this value to false after performing some syncs, the error is still visibile in either the Web Console or the NetWeaver Administrator because it would have been sent by the previous sync and these statments are retained and never purged. Hope this helps and clarifies your doubts.
Best Regards
Sivakumar

Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?

Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?

Hi Todd,
I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
I look forward to hearing back from you.
Best,
Sara

DNS feature not functioning properly

DNS feature not working properly after latest update. When DNS is active calls from Favorites do not go through and is sent to voicemail. Texts from favorites also do not go through. Why even have this feature when it does not function properly.

I assume you mean DND. Double check the settings to make sure your favorites are permitted. Reboot the phone if they are not coming through.
Text messages will NEVER sound an alert when DND is turned on, regardless of whether favorites are allowed by DND. Only calls are allowed.

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Why do QTVR interactive images do not function properly or at all?

QTVR interactive images do not function properly. Check this page out in firefox and then in safari and see the difference.....
http://www.edfruinphotography.com/MILLCITY_2.html

I have Safari 5.1.7. I am using Mac Snow Leopard.
That page is using Flash as well as Quicktime. With Firefox, when I drag the cursor, there is no movement until I let go of the button. That makes it very jerky.
You could try disabling hardware acceleration and see if that works better with Firefox, in Preferences > Advanced > General.

My iPad is not functioning properly, I want to restore it. but I'm unsure if my Minecraft world will be saved in the backup

My iPad is not functioning properly, I want to restore it. but I'm unsure if my Minecraft world will be saved in the backup. Please help, I need to use it ASAP

How to BackUp
http://support.apple.com/kb/ht1766
See iTunes will backup the following Information Here...
http://support.apple.com/kb/HT4946

The all windows feature is not functioning properly

Similar Messages

Maybe you are looking for