The announcement Ready for BIOS update does not come with T4400c !
I downloaded the Bios. I accomplished this steps
1 Extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding which type of disk to use).
2 Ensure the Notebook is connected to the mains.
3 Turn the Notebook off.
4 Turn the Notebook on with the F12 key. Keep the key pressed until a short beep can be heard.
The announcement Ready for BIOS update comes not and does not get ahead not.
How can I solve the problem?
(http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS&FID=TRO0000000b07)
Hi
I think its really an oldie.
Did you download really the compatible and right BIOS?
I have checked Toshiba driver page and I have found BIOS version 1.00 and 1.2.
As in the Toshiba document described you have to use the Update procedure 7.
If it doesnt work so in my opinion you have used wrong BIOS.
Similar Messages
-
I bought the ipod touch today but it does not come with a wrist loop strap
hi there i just bought my ipod touch 5th just today and tot thet would put the loop wrist strap in but it does not come in just wandering where can i get the wrist loop strap
The 16 GB 5G does not come with a strap.
iPod touch
iPod touch loop
(sold separately for 16GB model)
Apple EarPods
Lightning to USB Cable
Quick Start guide
You can purchase a strap at an Apple store and maybe from a place like Best Buy. -
M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update
Bios
FBKTB0A
3/31/2015
The bios shows updated and i can go into the bios but the ram amount and frequency does not show rite and it also does not want to boot any of those items.
Please advise.
Thank YouHello all,
I, too, found this oversight on the part of Lenovo to be quite distressing. It is possible to upgrade the X61 BIOS with a USB thumb drive. I have provided directions at http://ubuntuforums.org/showthread.php?t=817897
The above tutorial is aimed towards Ubuntu Linux users. However, I believe that users of Vista should be able to follow along. Please let me know if you have any questions... the process is simple enough that it should be possible with any OS out there right now.
Mike -
Dear Sirs,
I had just upgraded my OS to the OS X Mavericks. After doing so, I noticed the following changes:
1) My MS Outlook for Mac 2011 does not sync with my Mac book's calendar/contacts/notes.
2) My iPhone4s does not sync with my Mac book's calendar/contacts/notes anymore.
Please help, thank you.
aawwiiCorrect, USB local sync was taken away from iphones and ipads with 10.9.1 and 2. We are not allowed to speculate on rumours it might come back in 10.9.3 plus new iTunes. Either wait and see or explore Syncmate 5 beta free trial.
icloud still works.
Cant help with the Outlook problem. -
The bp id for org unit does not exist
Dear expert,
after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
what can we do to solve the issue?
will there any impact if we keep no bp id for the org unit?Hi,
You can use the transaction CRM_OM_BP_INTEGRATE.
Select the Org unit and enter the org id in the input field and execute it.
Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
Regards,
PP -
The file required for contribute compatibility does not exist on the server
Hi, when connecting to a server in Dreamweaver that is set up
for Contribute I keep getting this message when putting files:
quote:
The file required for contribute compatibility does not exist
on the server. Would you like to turn off Contribute compatibility?
I see the post from jonbradley below, but the solution
suggested doesn't help me:
Does anyone have any idea what this means and how to stop it
from displaying?
Thanks in anticipation...
SimonDid you search the forum on compatibility?
http://www.adobe.com/cfusion/webforums/forum/searchresults.cfm?requesttimeout=500&cate gory=290&forumid=55&FTVAR_KEYWORD1FRM=compatibility&FTVAR_SEARCHWHATFRM=c& FTVAR_RESULTTYPE=topics&FTVAR_AUTHORFRM=&FTVAR_TABLECHOICEFRM=current&FTVAR_CA TEGORYIDFRM=290&Selection=false&FTVAR_DATESELFRM=Select&FTVAR_STARTDATEFRM=&am p;FTVAR_ENDDATEFRM=&cal_d1=0&cal_d2=0 -
My Iphone 4 does not come with a SOFTWARE UPDATE option.
My partner bought my iphone 4 version 4.2 about two years ago from a well known store. He got himself one at the same time but i cannot update mine because it does not come with an option in settings, general that allows me to update it. All of my apps are useless as they need at least iSO5 to run. I cannot check my bank accounts or anything. I have rung and spoke to apple many of times and followed all the steps to try and update. As this is not my fault and the iphone had not been loaded with the correct software there should be something APPLE could do free of charge!!!! I really need help as i cannot afford a replacement or want one. I just dont know what to do anymore!!
Hi there wishheartgirl,
You may find the information in the article below helpful.
iOS 4: Updating your device to iOS 5 or later
http://support.apple.com/kb/HT4972
-Griff W. -
Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.
Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help
Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M. -
When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.
== This happened ==
Not sure how often
== I opened firefoxdont have google open in a tab!!!!!!!!
(if you are one who opens FF and it opens google then immediately open another tab to go to a site then just visit the site from the page that opened without opening a new tab)
OR
if you have cool preview then disable that
(the sound is for the celebration of 30 years of pacman and you can play the game on google's homepage) -
Why didn't my ios 6 update for my ipad 2 not come with siri?
Why didn't my ios 6 update for my ipad 2 not come with siri?
Siri is iPad 3+. The 1 and 2 most likely lack the hardware to make the software work properly
-
Is there an application like "snag it", which is part of the Microsoft Office suite for mac? Does it come with the Mountain Lion OS, or do I have to buy it separately? If it is a separate purchse, what would you recommend?
Built-in to OS X is the ability to capture an entire screen or selected portions. Snaps are saved to the Desktop by default:
COMMAND-SPACE-3 snaps the entire screen.
COMMAND-SPACE-4 lets you select a portion of the screen to snap.
In your Utilities folder is a utility called Grab that provides similar functionality and more.
Then there are dozens of third-party solutions such as SnapNDrag and SnapzProX. You will find them and others at MacUpdate or CNET Downloads. Most have trial versions or trial times so you can test them out. -
When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?
We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator. -
Why does the iphone 5c come with a sim card taker outer and the iphone 5s does not come with one
why does the iphone 5c come with a sim card taker outer and the iphone 5s does not come with one
Good question... Lol, I've noticed that iPads do too... I just use a bent paperclip works like a charm.
-
How can I install a program that comes in a CD when the iMac does not come with a CD entrance?
How can I install a program that comes in a CD when the iMac does not come with a CD entrance?
Another option if you have access to a second Mac with a drive is to connect the two together with the iMac in Target Disk Mode, Transferring files between two computers using FireWire, and installing from the Mac with the optical drive.
OT
Maybe you are looking for
-
I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going
-
How can I listen to a text using Siri whilst phone is locked?
Hi I have just been playing with my new 4s and I would like to listen to a text through my headphones whilst biking. But it's annoying as Siri says I need to unlock my phone first. Is there settings to overwrite this? Also why can't I listen to an ol
-
Can't use "Copy Finder Items" after "Run Workflow"
Create a simple Automator workflow: Set just 1 action "Create Thumbnail Images" and save it. I called it "wf1.workflow". Now create the second workflow with 3 actions: "Get Specified Finder Items" action (choose an image file here). -> "Run Workflow"
-
Controlling Cursor/Scroll Bar
Hi All, I have a long interactive report which is stretched to many pages, now when I click on any of the lines in any page it gives me more data below that line as in hierarchy. I have the problem when I click on any such line which is not displayed
-
Getting Workflow Notification Mailer SMTP Information Programatically
hi all, I have get SMTP information that is been configured in oracle applications r12. I need to know , how we can get it programmatically. Is there any database view? e.g smpt.gmail.com We have provide email intimation facility from ADF page. Thank