The APP STORE app on the iPhone 4S not working correctly for UPDATES now.
It used to be, when I had APPS that needed to be updated, I would see a badge on the APP STORE icon with the number of apps that needed to be updated. Then I could tap on the icon for the APP STORE, and I would see the UPDATE button showing the badge as well. I would also see the actual apps needing updating on screen.
NOW, even though there are APPS that need updating, there is NO badge on the APP STORE icon, there is NO BADGE on the UPDATE button, and no apps will appear on screen. If I tap the UPDATE button, after a few seconds, the apps WILL appear on screen, the badge WILL appear on the UPDATE button, and, if I go to the home screen, the APP STORE icon has the badge with the number.
It is as if the apps that need updating do not automatically go to the APP STORE app anymore until I summon them by pressing the update button. This happened ever since I did an iPhone update from backup a few days ago.
try hard resetting the device, holding the power button and the home button at the same time, and reset all settings (wont delete anything) settings>general>reset>reset all settings
Similar Messages
-
HT203421 Since installing Yosemite 10.10 the Apps Store application on my iMac does not work
installing Yosemite 10.10 the Apps Store application on my iMac does not work properly. Applications show up in the App Store window to be updated but in fact most of them do not download and install. Some 3rd party software does download and install but most Apple and HP Applications do not. They appear in some cases in both the Ready to update or install list and in the "Installed in the last 30 days list". In some cases when I click on "Update" it shows in the "Installed in the Last 30 Days list" but it is not installed. In the case of the latest Yosemite 10.10.3 beta down load, it momentarily show up like it is downloading but then disappears and does not install.
I am now using Yosemite 10.10.2 and am trying to install the beta Download Yosemite 10.10.3 hoping it will resolve my problem but starts to download from the App Store snd then quits.
-
My iPhone stopped when i tried to update now it will not update or restore HELP
iPhone and iPod touch: Unable to restore
-
i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?
Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/ -
I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.
Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
Thank you and I hope this helps! -
Need help iPhone 5 not working correctly
my iPhone 5 keeps pressing all the keys around the key I want it to press on the keyboard also problems using lock screen numbers have re-started and the phone just reverts to not working correctly
also when I got this phone I did it from a back up of my old iPhone 4 but not all the songs have fully downloaded (they are there, but cannot play) when I look on iTunes it says I have no songs that arn't on my iPhone that I've bought?
Should I take my phone back to my carrier which is 3? Or make an appointment at the Genius Bar?Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
Backups do not contain media, all the media should be in iTunes on your computer. Simply select the content desired to sync to the device and sync. -
Download it many times still not working...
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
My Mac App Store on my MacBook Pro does not work properly.
My Mac App Store on my MacBook Pro 15 inch does not work properly. When i go on to the app store, my wi-fi resets and then my app store quits. Why is this? How can i fix this problem? Please Help
Back up all your files, on boot up when you first press the power button, press CMd and r and keep pressing until you get something apart from a apple logo. Then click reinstall Mac OS X or something like that. You may be prompted to insert your disk.
Good luck -
My touch screen screen is not working properly. I touch one App or icon and an different App/icon opens. It is an ultra sensitive touch screen, any idea on how to solve this issue?
Yes! Stop using the charger! My husband noticed it was worse when plugged in. One apple guy told me "restore" ... I did all that and it did not help. After I stopped using the charger, it stopped messing up. I used my husband's charger and all is well.
Later, an apple employee told me to bring in the charger for a trade in, because they had a recall on some of them.
I haven't traded it yet, but I plan on it.
Good luck! Let me know! -
Mac app store "cannot complete request"& iOS 7 Not working
First off. Today when i was getting in my car iOS 7 was avalible so I was waiting to go home to update it. Now update isnt there?!!? Also, I need to purchase Final Cut Pro X But when I try Mac App Store sends an error "Cannot complete request." Is Apple crashing due to over downloading of iOS 7? Help!
Could be.
-
The IOS8 is very bad to iphone 4s, not work!!!!
My iphone 4s doesnt work with IOS8! How can I change to IOS7?
There is no way to go back to iOS 7. Apple is trying to perfect iOS 8. And now iOS 8.0.2 is available and it fix some bugs in iOS 8. Maybe you can update to it or wait until iOS 8 becomes perfect and then update.
-
I have an old application built under LabVIEW 5.1.1 which opens an .iak file (the file path is embedded in the app) and reads/writes to modules attached to an FP-1000. Recently I was forced to move the setup onto a new PC and now I'm unable to get the app to communicate with the FP hardware. The new PC has recent drivers installed (MAX 4.5, FP drivers 6.0.2). From MAX, I can open the .iak file and communicate with the FP hardware, so I'm unsure of where the problem lies. Are there version limitations with such old LabVIEW code and new FieldPoint drivers? Sorry, I haven't visited this setup for a long time (nor did I create it originally), so I'm a bit rusty on FieldPoint setups. Any guidance would be much appreciated - I'm trying to avoid having to redevelop the app.
Thanks,
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW DeveloperThanks, Chris, for replying.
I have every version of LabVIEW from 5.0 through 2009 beta available, though not presently installed. I was trying to avoid having to bring this app back into the development environment.
Since I posted last, I experimented and fixed the issue. I took a current copy of FPLVMgr.dll (version 6.0.0) and dropped it into the support directory for the app, replacing the old (3.0.0) DLL which was there. So, the answer to my question seems to be, an old LV executable can use a new FP DLL, and apparently must do so if the MAX/FP driver installation is updated.
Hope this info is useful to others.
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer -
Iphone 4s not working after ios update 6.1.3
I have an iphone 4s boxed, brandnew and unopened for a year not until March 2013, for a couple of days i have used it, worked excellent but after i have unlocked it through at&t and updated it to IOS 6.1.3 it went to re-activation mode again. Tried several times to activate it but no succeess. I went to an apple store to discuss the problem of the update and consequently the result it brought to my iphone4s but denied a replacement because it was passed the warranty period. I was offered a replacement (for a fee) of $200 but i refused since i believe i havent enjoyed the iphone for years, has not even dropped, water-damaged nor scratched. The manager on duty (Mary, Fairview Mall, Ontario) insisted that my iphone 4s has a growing software problem already and i just dont know of... I reiterated to her that the unit was working as brandnew just like many of my apple products i have. I havent called the apple support telephone support though. What should i do now? Please help guys. I cannot take it paying another $200 for an iphone that was practically brandnew and went useless after the update. I have a record of the at&t authorized unlocking request. Should i escalate the appeal to where? Please help.. Thanks a lot guys.
The fact that you chose to leave the device in the box for a year (a rather unintelligent decision) has no bearing on the warranty. Warranty starts from the date of the original purchase.
You can try basic troubleshooting from the User's Guide which is reset, restart, restore (first from backup then as new). -
Iphone screen not working correctly Please Help!!!!
Hi all, i just returned my broken iphone for a replacement. Everything worked fine until i tested cover-flow. At first everything was fuzzy. I reset my phone and then instead of everything being fuzzy, only the color black was. I really don't want to take it back again for a third iphone. Please Help!!!!!!!!!!!!!!!!!!
Allan Sampson wrote:
Removing and re-inserting the SIM card is not a standard troubleshooting step for any and all iPhone problems and not even for a connection problem.
Well removing the SIM and reinserting it has certainly proved useful for other phones, so I don't see why it shouldn't help as a last resort for an iPhone, especially when the nearest store is a hundred miles away. The Apple Tech guys often suggest it, as well, though admittedly I have never known it to help.
But we are getting off-topic and should probably move this discussion to another thread if you want to pursue it. -
Power button on my iPhone 5 not working correctly ...
Power button working only on left side - now,my iphone is 14 monts old ...And I am in Dubai,I buy my iPhone from apple.com/ae on-line....It is any chance in Dubai for help??? repair or replacement?? Thanks for help!
Thank you for reply....So I am not sure with this... repair is more cheaper , but I can ask in iStyle....my iPhone is like new - because all time from first day is in cover and full body protector....
I am upset that without any mechanical cause of my carelessness or ceases after 14 months of work power button - iPhone quality goes down a lot - this problem with the iPhone 5 has a lot of people around the world (as seen on the internet) .... pay almost 1 / 3 new phone is power - because in a few months, it may be the same ...
Maybe you are looking for
-
How can I convert m4p's or ACC files to MP3s so I can make a mp3 Disk?
Trying to make a mp3 disk for my Bose Wave system with all my jazz tunes, figured it would be nice to have all the music on one disk instead of multiples. However, the files I have are not mp3 format. How can I make my Jazz playlist songs mp3 format
-
Creation of Trasport request for the Deletion of Infoset from Dev
Hi i want to create a trasport request for the deletion of infosets from dev system and want to trasport request in to production. i wish to know while right clicking the info set and selecting deletion will it prompt for trasport request. could an
-
How do i put a box in my form and have consecutive numbering in it
How do i put a box in my form and have consecutive numbering in it
-
3D Text - Gradients are rasterized and causes color banding
Hi All I have applied a 3D>Extrude and Bevel on my text. Now problem is that when doing it, my border(part that is extruded) causes a color banding, since it rasterizes the gradients. See my image below. How do I take away those nasty lines? Thank yo
-
IPhone 3G speaker volume extremely LOW
Hi my GF's iPhone 3G OS2.2, the volume is sooo low she has to put the phone to speaker to hear anyone, this is not practical and very inconvenient. Should she take the phone back to the store? -Ryan