The apple id on my iphone is not my id, why is it so and how to get rid of it?
Hi, I am downloading application from Apple Store, The Apple ID shown was not the one which I have registered. How can I get rid of it?
just to settings/ then store/ then hit the apple ID and sign out.
Similar Messages
-
for my ipod 3g 8gb in itunes where the info for the memory is half of the memory is taken up by "other" so im wondering what this other is and how to get rid of it?
Have you reset your Ipod resently? Never mind my ohter reply.
-
In the Finder sidebar, under 'Shared', I encounter my TC, as well as another item with a long name starting with 'hp'. 'Get info' shows it to be a 'PC'. However, I don't have a PC. It cannot be my printer (HP), since that has anoter name.
I can not access the item, which has me a 'guest'.
What could this item be? And how to get rid of it?
Many thanks in advance for your help.
DBIt's almost certainly your hp printer and is showing the WiFi adapter MAC address after the HP.
To verify, look at the printer configuration page via Bonjour in Safari. The settings tab shows the Mac address in the bottom left hand corner for my model of HP printer.
I'm sorry but I can't explain why that would show up in the finder. -
MAJOR DEFICIENCY = WASTED MONEY:
I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
a lock logo with an arrow encircling it has appeared besides the battery percentage symbol in my iphone 4s. What does that mean and how to get rid of it ?
Its the screen orientation lock, and is covered in the User Guide.
Double-tap the home button, swipe to the right on the dock area and tap the left-most icon. -
I have this question mark (?) in the upper left corner of my Finder windows. Anyone know what's up with that, what it might portend, and how to get rid of it?
Are you sure you have a PowerMac? They can't run Mac OS 10.6.8. Maybe a Mac Pro instead?
Can you post a screen shot of that portion of the screeen for us to review? Does the question mark replace the Apple that's at the left end of the menubar? -
My 2nd generation Nano indicates that about half the space is 'other'. Anyone know what that means and how I get rid of it? All I've ever downloaded is music.
gomeznoles wrote:
My 2nd generation Nano indicates that about half the space is 'other'. Anyone know what that means and how I get rid of it? All I've ever downloaded is music.
The Other data on your iPod is album art, file allocation structures, your main library file, and any other data that the iPod uses to read its songs.
You can have it removed by going to your itunes and plugging your ipod back into it. Click the device then click the music tab then uncheck box that says include album artwork.. then sync again.. this time the OTHER stuff will now be removed. -
When I see the Visualize Plan for SQLScript it show Create Temp Index at many Places.
It also shows unsupported operator order CS_JOIN over CS_AGGREGATION.
Why does hana create Temp Index and how to get rid of it.Just browsing for some more information on this operation, and it just happened that my favorite VizPlan expert has chimed in here
I have a scenario where I am using a nested SQLScript based calc view. One view (child view) retrieves a relatively small data set, then the main CV takes that and joins with a bunch of other data from another schema.
When I started out, just the nested portion of (child calc view), takes roughly 800ms to return it's resultset, for which I was pleased. Now, when I added some other joins onto that dataset in the main CV, I am seeing my runtime spike to approximately 16 seconds, with 15 seconds being spent on a "Create Temp Index" process that only results in 12 rows (from what I can see).
Now the question becomes - since I have identified where 95+% of my runtime is being generated, how can I really pinpoint what operation is causing this? I was thinking the ID column (shown in the details) may offer some clues if one knew how to locate the details in a system table somewhere?
Otherwise, all I can see in the VizPlan is that YES there is a long running component, but I have no idea what it might be, therefore can't do anything about it
Regards,
Justin -
I have a 3rd generation ipod that a friend gave me. I cannot find anything on how to get rid of his name and music on it. This is what the owners manual says:
"Select ipod nano in the soiurce list and click the summary tab" I cannot find the source or the summary tab on itunes. Can any one help me? I would like to delete everything on it and start over but I am afraid I cannot add anything back on it. I know this is detailed and a lot, but I really need help.Restore
Note: Because Restore erases all of the songs and files on iPod, make sure toback up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.
How to restore your iPod:For Windows:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
For Mac:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod, even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with latest iPod Software version on your computer.
Restore Option 4: Restore and Update - Restores with latest iPod Software version on your computer.
6. A message will appear prompting you to enter an administrator's name and password.
7. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
8. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
9. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
Source:
iPod nano (3rd generation) Troubleshooting Assistant
Message was edited by: michael08081 -
Ever since I was with my iPad in France, it goes to the French app store instead of to the Netherlands' one. As a consequence, I am unable to download any app. Not in France, because my bank account number is Dutch (it says), not in the Nteherlands because I should buy in the Dutch app stoe.
How to get rid of this problem? I regularly travel from the Netherlands to France.
Thanks in advvance,
HansYou can find out how to get service for your iPad on this web page:
http://support.apple.com/kb/index?page=servicefaq&geo=Philippines&product=ipad
Regards. -
I was trying to update iphone 4 with new iOS 7 and all of a suddent the phone is stuck in restoration mode and while trying to update with new iOS, it give an error message that reads like "iphone could not restored. An unknown error occured (16)" in itune page. I am not able to figure out what is causing it and how could it be resolve? please help with the probable options.
If you read the error messages in the support document that you linked from, you can see that error 16 can be traced to either a USB error, or a hardware error. I would try the recommendations under those sections in the support document and see if you can take care of it. Otherwise, I would make an appointment at the Genius Bar at Apple to have the hardware checked.
-
I opened a word attachment to an email in my gmail account and now I can't get rid of it. When I tap the mail icon the doc appears not my emails. Can anyone help?
1. Double-click the Home button reveal the Task Bar
2. Hold the Mail icon down for a minute or two until the minus sign appear
3. Hit the minus sign to close the Mail icon -
How do i get rid of the message that keeps popping up that says "google talk authentication failed"????
funwidowlady,
Good afternoon! I'm glad I can be here to help with this error. In the device this application is identified only as 'Talk', so that be more familiar to you. First I recommend opening the 'Market' app on your phone, then Menu>My Apps to see if this application requires an update. It will display a list on top of all applications that need to be updated. If nothing exists, tap 'Home' and go into 'Settings>Applications>Manage Applications>Talk, then tap 'Clear Cache' and 'Clear Data' to remove the history of that application and stop the notifications. The app will remain on your phone for future use, if you desire to take advantage of it. Read more about Google Talk here
Thank you!
AdamE_VZW
Follow us on Twitter @VZWSupport -
HELLLLLLLLLLPPPPPP!
I'm going to assume the consolidating files does not work due to hard drive space limitations.
Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility? That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
Also, using the Apple article on moving the library, take a slight twist on what it says. Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation. -
What is up with all the gb's of "other" on my hard-drive, and how to get rid of it??
when i look at the overview of my hard-drives (i have 3, tb-sized internal hard-drives installed into my 2008 macpro) i see a lot of "other" in yellow.
anyone know what that is and how to remedy? it seems to me that a few hundred gigs of "other" is suspicious.
sorry, i have mountain lion OS not snow leopard, but i tagged it incorrectly(10.6.8)
Can you please post a screen shot of where you are seeing the "yellow" in Snow Leopard OS or advise which app you are using for the "overview?"
*SOLUTION* When applications consume too much RAM
The Storage Display
Maybe you are looking for
-
How do I let other users on my MacBook Pro update apps that I've downloaded?
I recently left a position as an IT at a school district where I was put in charge of all Mac products district wide. Most of the important apps, such as Apple Configurator or Remote Desktop, were downloaded using a district Apple ID, but many of the
-
Media player plug in will not install in server 2008
after installing firefox 3.6 in server 2008, not the server 2008 r2 but the original. the firefox it self runs great BUT you can not listen to music in any web site using the media player plug in because the plug in refuses to install saying it can n
-
DB15 Male to RJ45 Male for T1 cable (urgent!!!)
DB15 Male to RJ45 Male for T1 cable Anybody know what is the pinout information for this cable, this is urgent, thanks for any clue.
-
How can we call a task in process definition A from Process definition B
Hi, Is that possible to call a task in process definition A from Process definition B? Thanks.
-
HP 250 G2 unable to use recovery discs
So I purchased this laptop last year at Microcenter and since day 1 I noticed that the amber/white light that turns on when you connect the charger, it never turns white even after living the laptop charging the entire night, so far it doesnt bother