The Apple instructions with no luck. Grateful if anyone can shed some light on this !
I seem to be unable to locate or play iTunes Radio in iTunes. I have followed the Apple instructoins with no luck. Grateful if anyone can shed some light on this !
Thanks very much. Now I feel stupid!!
Similar Messages
-
Plugged in Apple TV, Apple symbol appears the a view of the rear of the box with a USB lead going to an iTunes symbol? Can anyone shed some light on this oh and it doesn't go past this point
You need to grab a micro usb cable and restore via iTunes
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
when i try to download the software onto my mac, i receive a message saying that safari cannot open the specified address as OS X does not recognise the internet address starting with "aam". Please please can someone shed some light on this, its driving me MAD!!!
Try and download the Desktop Application First before trying to install any other Adobe Product. The link for AAM is Safari looking for Desktop Application in your machine.
Creative Cloud Help | Creative Cloud for desktop -
Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)" -
when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanksIs the English sim from the original carrier as that is usually the message you get with a carrier locked phone.
-
Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
So I downloaded acrobat XI Standard from the Adobe website, when I go to install it, it says "Adobe XI Pro" at the top left corner. Can anyone shed some light on this for me? I have a volume license for XI Std. so I would like to use the Std. version.
login and download your software from the adobe volume licensing website, Customer resources | Adobe Buying Programs
-
I have a 3rd Generation ipod touch that is not recognized by itunes or my computer. My itunes works with other apple devices I own. I cannot reset the ipod touch and can never get to the screen where it is supposed to show a red battery to turn it off. I can't reset it. Have tried to use the suggestions on the apple site to no avail. Any suggestions ?
From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod? -
When I start Firefox, about 15 seconds after I start it, my Firefox freezes for about 1 minute. I found out that it is my Hotmail that makes Firefox freeze.
First I thought it was my computer, but I have 2 other girls in my class that use Hotmail and Firefox and their computer also freezes for 1 full minute.
This is very annoying, what can I do to change this?
xxx ellen
p.s. I am from the Netherlands, maybe that has something to do with it?Try deleting cookies and cache:
1. Tools| Clear recent history
2. Time range to clear: Everything
3. If it isn't already selected, select '''Cookies''' and '''Cache'''
4. '''Clear now'''
'''Check cookie exceptions'''
1. Tools | Options | Privacy Panel
2. Set '''Firefox will: Use custom settings for history.''' '''Insure Accept cookies for sites and accept third-party cookies''' is selected
3. Click '''Exceptions'''. If the misbehaving site is in that list, select it and click '''Remove site'''
'''Safe Mode'''
Add-ons can cause problems with not being able to log into certain websites. To see if this is the case with your issue, run [[Safe mode]]. When you get to the safe mode window, select Continue in Safe Mode. If this resolves your problem, see [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Also see [[Updating Firefox]] and [[Cannot log in to websites]] -
i upgrade my 3gs to os 6.1 but starting then all my manually installed apps does work and every time I open them, it asks me to log in to my apple account but responds that my password is incorrect. I tried to change my password but i never received the confirmation email. Does anyone know how to fix this?
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I ran the update for 10.7.4 and now my 2011 outlook will not load, I've reloaded the application and it still won't load, any help is so appreciated!
Run all available Office 2011 software updates using Microsoft Auto Update program.
-
TS3681 the device displays the Apple logo with no progress bar for 8 hours until battery run flat.
My Iphone4 displays the Apple logo with no progress bar for 8 hours until battery went flat this was after i try to make an up date know the i tunes dosent reconise my phone.
Can you please help me
Thank you.http://support.apple.com/kb/ht1808
-
I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick. My iTunes will not open because it says i need a 64 bit version. Already followed the promted instructions but no luck. Any suggestions??
Oh, you do have the C2D! That's great!
I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.
Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
Well, that's about it..
I hope that something I've mentioned can help you achieve your overall goal.
Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
Best Regards,
mm~ -
my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issue with the wifi?
also i noted that it has only been doing this since quite recently, before it was fine
please help!First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.
Maybe you are looking for
-
When I open ical, the calendar looks like an old desk pad vs what is shown in the manual or on-line tutorials. How do I change the view (i.e. background) not the month/day/week view but the background template? The default in the manual is good. S
-
Our auditors want to confirm 2010 Accounts Receivable balance by analyzing subsequent cash receipts in 2011. They want to know from the AR cash receipts received in 2011 what total dollar amount applies to 2010 AR documents. I ran the report S_ALR_87
-
RE logical/physical standby database
1. Why logical standby database is SQL apply, and Physical standby database is redo apply? What 's the meaning/objective for that? (pls don't tell me what is SQL/redo apply) 2. As we know, a logical standby database can be used for reporting and quer
-
App store update not working! Fix?
Okay, I have a non-jailbroken iPod touch 4th generation with iOS 4.3.3. Today I was trying to update BATTLEFIELD: BAD COMPANY 2 to the latest version. I went on the updates tab of the AppStore, clicker battlefield and then tapped update. Nothing happ
-
Connections not showing after restart
I just upgraded to version 1.5.0.53, imported my connection settings from my previous installation (1.3), and everything works great, until I close the program. When I run the program again, the connections tab displays nothing after I click on the +