The application has accessed a fund managements or cash mgt module with par

When I am trying to post a entry Mesage appears F1030
The application has accessed a fund managements or cash mgt module with parameters missinfg or defective
Please solve

Hi,
This error occurs when you post data which is not related to that specific company code.
post the correct data and check.If the problem still exits.Please clearly explain the problem.
Thanks
micheal

Similar Messages

  • HT201210 I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found.  What happened and how do I fix this?  I can't access any of my music now.

    I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found.  What happened and how do I fix this?  I can't access any of my music now.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99460)

  • The application has encountered a problem and needs to close

    I'm building an application on LV using TABs, FPGA DLLs and DLLs that comunicate with CAN, GPIB and PCI devices.
    The program apears to work properly but sometimes, and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close..."
    Sometimes the error apears when I'm trying to exit the program, some other times it crashes before that.
    I can't find the error because the program may work well for several hours and then crash or it crashes after 5 minutes of working with it.
    Any clues on what is going wrong?
    Regards,
    Daniel Coelho
    Daniel Coelho
    VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
    Controlar - Electronica Industrial e Sistemas, Lda
    Solved!
    Go to Solution.

    I'm still going through the example, but since the error ocours sporadicaly this could take some time to pinpoint the error.
    I was reviewing the code and I was wondering about some simple things, like:
    - I have to many local variables, could this be causing somekind of an error?
    - since I'm using DLLs on my code, are there a way to make sure that all DLLs are loaded and unloaded correctly?
    My program has a TAB with a simple TestStand user interface and when I change TABs I close the teststand ui; when I use that user interface I load and unload the same DLLs that I use on the other TABs, i. e., when using the UI I load all the DLLs that comunicate with the devices and when I change TABs I unload all the DLLs because on each separate TAB I can control those devices indicidually.
    It's a bit hard to explain but I think I managed
    Is there some truth on my questions? If so, what could I do?
    Daniel Coelho
    VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
    Controlar - Electronica Industrial e Sistemas, Lda

  • The application has unexpectedly quit???

    Hello,
    I have been using iMovie, and iDVD for a few years now. Nothing fancy, just home videos, but I really enjoy it, and I feel very good when a project is done and I can share it with my family.
    My most recent project is a group of iMovies based on the first 4 years of my middle daughter's life. I title each movie by year (1990, 1991, 1992 and 1993). Each movie has titles, transitions, soundtrack music, and "chapters" added, all standard iMovie stuff.
    My problem is that this project will not work. The project starts out fine, just like always, with the little sideways barber pole spinning away, but when I come back several hours later to check on it, there is a window stating that the "application has unexpectedly quit" and asking me if I want to submit a report to apple. This has not happened before.
    The first time it happened, I did all the things I have learned to do when iMovie tries to act up or give me trouble, specifically: I deleted the iDVDplist, I "repaired permissions", and I even ran "Cacheout X" and restarted my computer. But after all that, when I tried the project again, it "unexpectedly quit" again.
    I don't know what to do now? I have read that many people have had trouble with iDVD chapters being placed at transitions. I thought this must be a problem with the new iDVD5, because I have always placed chapters at transitions (and at the very beginning of a project) and I have never had a problem before.
    Since I don't know what else to do, I am going to go back and move the chapters around avoiding the beginning, and any transitions, and see if that makes a difference. Other than that, can anyone suggest anything else I could try?
    Would upgrading to iLIFE '05 help? I actually own it. I have had the box sitting on my desk for months, but I have been reluctant to load it because of many of the problems that I have read about in these forums. In my case, iDVD4 has been working very reliably for me, and my thought was "if it ain't broke, why fix it?" Well, now it seems to be broken, so, should I try to fix it?
    Any thoughts or suggestions would be greatly appreciated,
    Lincoln

    Thank you David,
    I appreciate your advise. As you suggested, I went back and moved all the chapters from each of the iMovies. I have never NOT placed a chapter at the very beginning of a project, and it seems strange for the "2nd" chapter to be listed as chapter #1 (since the first chapter "Beginning" is implied), but--- it worked!
    It is hard to say exactly what worked, because I also created an entirely new project. It was an exact duplicate of the original project in every way (except for the new chapter locations), but I simply couldn't figure out how to "update" the original project after I made the changes, and I thought that making a new project would be the easiest thing.
    So it is probably the chapter changes that fixed it, but perhaps there was some wierd problem with the first project. The other thing I was wondering about was that this project was less than 2 hours long, but not by much. When I looked at the "Status" section, I had used 3.8 of the available 4.0GB for video.
    But the bottom-line is that I am very happy that the project is complete, and I continue to be amazed at the high quality movies and DVD's I am able to create with the iLIFE programs.
    Now that this crisis is over, what is your opinion of iLIFE '05? Should I take the plunge and load it up, or keep working with programs that I am happy with? I must admit that I would love to have access to the new "THEMES" in iDVD, but as you can plainly see, I am simply not computer saavy enough to handle any of the new problems that I have read so much about in the iMovieHD, and iDVD5 discussion groups.
    Thanks again,
    Lincoln

  • When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

    When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
    Regards.

  • The application has been mishandled!

    we had deployed an ear last year august. Now after running all this days we are getting an error on oc4j10g containar full suit as below:
    The application has been mishandled!
    Un-authorised access to the application
    please give the solution as to who to handle the above error
    DS

    Hi,
    please see also the other thread:
    http://supportforums.blackberry.com/t5/BlackBerry-Z10/Problem-with-sensors-on-Z10/td-p/2693831

  • I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

    i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

    I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed.  It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4).  Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html   The previous version works beautifully.

  • Getting list of tables the user has access to across different schemas.

    Hi,
    I have to get the list of tables that an User has access to. I tried the below code. It takes a very long time. Is there any way in which I can specify the user name and get all the tables that he has access to? I know that we can use dbMetadata.getTables api. But this returns the list of tables under the said schema. But I want the list of tables that the user has access including tables in other schema.
    In the below code, I am trying to get the tables for which USER_MICHAEL has access to.
    DatabaseMetaData dbMetadata = connection.getMetaData(); String userName = null; dbrs = dbMetadata.getTables(null,userName , "%", new String[] { "TABLE" }); dbrs=dbMetadata.getTablePrivileges("",userName,"%"); while (dbrs.next()) { String tableName = dbrs.getString("TABLE_NAME"); String schema = dbrs.getString("TABLE_SCHEM"); String privilege = dbrs.getString("PRIVILEGE"); String grantee = dbrs.getString("GRANTEE"); if(grantee!=null && grantee.equals("USER_MICHAEL")){       System.out.println("Schema---"+schema+" Table---"+tableName+"  Privilege----"+privilege+"  grantee---- "+grantee); } }

    That would be database dependent.
    Some engines have some system tables that together may be used to extract such information, others may not make it available at all outside closed APIs.

  • Using OS 10-6-8. For no apparent reason, mail refused to open and the icon in the dock changed and the application has disappeared except in iWork. Under Iwork, the message says: "yoou tried to open Mail version 4.5 (1084/1085) in: /Applications/iWork '06

    Using OS 10-6-8. For no apparent reason, mail refused to open, the icon in the dock changed appearance and the application has disappeared except in iWork. Under Iwork, the message says: "you tried to open Mail version 4.5 (1084/1085) in: /Applications/iWork '06. Using OS 10-6-8. It can't be used on thius version of Mac OS X. Try opening the version of Mail located in the Applications folder..."  How do I get back to mail and retrieve my existing messages?

    You should consider downloading the 10.6.8 combo updater and applying it again.
    http://support.apple.com/kb/DL1399
    Pondini has a great page about upgrading.
    http://pondini.org/OSX/Combo.html

  • How to solve the Installation runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support..."

    After my pc system updated. I cannot open itune properly.Then I try to remove and re-install it again.
    However, the pc said "Runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support...""
    How can I solve this ?
    Please help !!!!!!!!!!!

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • Photoshop elements shuts down 'the application has requested the runtime to terminate it in on unusu

    The photoshop elements starts opening then the message appear: 'The application has requested the runtime to terminate in on unusal way' and the photoshop elements shuts down

    hi  i tried to follow the link from the article C:\.......................................\locale\en_us\MediaDatabase.db3
    but in my Photoshop there is no MediaDatabase.db3
    When I click on locale\en_us I can see three folders              application_swfs
                                                                                             Plug-ins
                                                                                             Support files
    The link is for the photoshop elements 9. I have the photoshop elements 10

  • "SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run." What is this all about?? Shall I give up on Firefox?

    When I tried to use Firefox this morning I got this message with exclamation marks.
    "SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run."
    What is this all about?? Shall I give up on Firefox?

    Sorry to hear that. I understand your frustration and I hope they send back a better working N78-3.
    Myself, I count myself lucky. Everything works perfectly for me right now...email, bluetooth, maps, gps, 3rd party apps, battery life, 3G, wifi, etc. etc.
    The only issue I've been having is the dreaded reboots but I believe that may have to do with 3rd party apps. I recently uninstalled Google Search app from my N78 and since then it hasn't rebooted or shown any issues. This seems odd at first but makes sense if you think about the fact that the Google Search app loads itself into memory and runs in the background at all times.
    I did this this past Tuesday night and so far no reboots, crashes or any problems. I'm sure I just jinxed myself but I've been using it heavily over the last few days with no issues. Prior to this, it would usually reboot every 2 days. If it doesn't reboot for another few days I'll be happy.
    I would normally not stand for this but I just love the phone and if I got something else it'd probably be the iPhone 3G which has perhaps more software bugs and issues than the N78-3!!
    Best of luck. Here's hoping they release an update soon.

  • The application has failed to start because it's side-by-side configuration is incorrect. Please see

    When opening preimere pro cs5.5 i get this:
    the application has failed to start because it's side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail

    Moving this discussion to the Premiere Pro CS5 & CS5.5 forum.

  • OBIEE 10g Installation error "The application has failed to start because its side-by-side configuration is incorrect"

    Hi,
    I did installation of OBIEE10g on windows server 2008r2 which is placed on VM ware, Installation completed successfully. but while starting the BI services or opening the administration tool it is showing error as below
    "The application has failed to start because its side-by-side configuration is incorrect.Please see application event log or use the command line sxtrace.exe tool for more detail."
    Please guide me any suggestions.
    Thanks in advance
    Regards,
    Satya

    check these Error: The application has failed to start because the side by - Microsoft Community https://forums.oracle.com/message/10578756
    https://forums.oracle.com/thread/958782
    Resolving Side-by-Side Configuration Issues - OJ's perspective

  • CS6 says "The application has failed to start because its side-by-side configuration is incorrect..."?

    CS6 won't open--whenever I try to open a CS6 application, a windows pops up and says "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." This occurs for every single CS6 program (PS, Flash, etc.) except Illustrator. Illustrator is the only one that will open.
    I have Windows 8. I've had CS6 for about half a year and this is the first time this has happened.

    Did you ever find resolution?

Maybe you are looking for