The application has encountered a problem and needs to close

I'm building an application on LV using TABs, FPGA DLLs and DLLs that comunicate with CAN, GPIB and PCI devices.
The program apears to work properly but sometimes, and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close..."
Sometimes the error apears when I'm trying to exit the program, some other times it crashes before that.
I can't find the error because the program may work well for several hours and then crash or it crashes after 5 minutes of working with it.
Any clues on what is going wrong?
Regards,
Daniel Coelho
Daniel Coelho
VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
Controlar - Electronica Industrial e Sistemas, Lda
Solved!
Go to Solution.

I'm still going through the example, but since the error ocours sporadicaly this could take some time to pinpoint the error.
I was reviewing the code and I was wondering about some simple things, like:
- I have to many local variables, could this be causing somekind of an error?
- since I'm using DLLs on my code, are there a way to make sure that all DLLs are loaded and unloaded correctly?
My program has a TAB with a simple TestStand user interface and when I change TABs I close the teststand ui; when I use that user interface I load and unload the same DLLs that I use on the other TABs, i. e., when using the UI I load all the DLLs that comunicate with the devices and when I change TABs I unload all the DLLs because on each separate TAB I can control those devices indicidually.
It's a bit hard to explain but I think I managed
Is there some truth on my questions? If so, what could I do?
Daniel Coelho
VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
Controlar - Electronica Industrial e Sistemas, Lda

Similar Messages

InterVideo WinDVR Application has encountered a problem and needs to close.

My TV Anywhere has suddenly stopoed working and the message "InterVideo WinDVR Application has encountered a problem and needs to close. We are sorry for the inconvenience." appears each time I try to open the program. MSI Radio works fine. I have uninstalled and re-installed the programe (originally MSIPVS now MSIPVS3). I did try to download the new Beta drivers just to try, but the zip file shows 0 bytes!
Has anyone come across this, or can anyone suggest what I can try to resolve the issue?
Many thanks in anticipation
Gareth

Jeremy:
I should point out that I am much more confident with software issues. I am not a hardware person and have never attempted to open up the box!
Realtek is the card on the motherboard.
I hope this is the information required:
OS Information:
Property   Value
OS Name     Microsoft Windows XP Professional|C:\WINDOWS|\Device\Harddisk0\Partition1
Service Pack     2.0
OS Manufacturer     Microsoft Corporation
Windows Directory     C:\WINDOWS
Processor:
Property   Value
Current Clock Speed     3000
Description     x86 Family 15 Model 2 Stepping 9
Manufacturer     GenuineIntel
Name     Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory (RAM):
Property   Value
Bank Label     RAS 0 & 1
Capacity     536870912
Bank Label     RAS 2 & 3
Capacity     536870912
Total Memory Deteced in Hardware: ~1024 MB
Memory Reported to Operating System: 1023MB
Disk Drives:
Property   Value
Description     Disk drive
Manufacturer     (Standard disk drives)
Model     Maxtor 6Y160M0
Media Type     Fixed hard disk media
Size     163921605120 (~153 GB)
Number of Partitions     2
Description     Disk drive
Manufacturer     (Standard disk drives)
Model     Canon MP Memory Card USB Device
Media Type
Number of Partitions
Description     Disk drive
Manufacturer     (Standard disk drives)
Model     IC35L060 AVV207-0 USB Device
Media Type     Fixed hard disk media
Size     61492193280 (~57 GB)
Number of Partitions     1
Installed Printers:
Property   Value
Name     PaperPort Color Image
Port Name     BIPORT
Default     False
Driver Name     PaperPort Color Printer Driver
Name     PaperPort Black & White Image
Port Name     BIPORT
Default     False
Driver Name     PaperPort Mono Printer Driver
Name     Microsoft Office Document Image Writer
Port Name     Microsoft Document Imaging Writer Port:
Default     False
Driver Name     Microsoft Office Document Image Writer Driver
Name     Generic / Text Only
Port Name     LPT1:
Default     False
Driver Name     Generic / Text Only
Name     Canon MP370 Series Printer
Port Name     USB001
Default     True
Driver Name     Canon MP370 Series Printer
Name     Auto Microsoft Office Document Image Writer on GARETH-14ETIB74
Port Name     \\GARETH-14ETIB74\Printer
Default     False
Driver Name     Microsoft Office Document Image Writer Driver
Motherboard:
Property   Value
Manufacturer     MICRO-STAR INC.
Model
Name     Base Board
Part Number
Product     MS-6758
Serial Number     00000000
Version     2.00
BIOS:
Property   Value
Manufacturer     American Megatrends Inc.
Name     Version 1.00
Release Date     20040324000000.000000+000
Version     AMIINT - 10
Monitor:
Property   Value
Description     SyncMaster 173V/172V/173S/173B
Name     SyncMaster 173V/172V/173S/173B
Screen Height     768
Screen Width     1024
Keyboard:
Property   Value
Description     Easy Internet Keyboard
Pointing Device:
Property   Value
Manufacturer     Logitech
Name     HID-compliant Wheel Mouse
Sound Card:
Property   Value
Manufacturer     Creative Technology, Ltd.
Description     Creative EMU10K1 Audio Processor (WDM)
Device ID     PCI\VEN_1102&DEV_0002&SUBSYS_80661102&REV_0A\4&1F7DBC9F&0&08F0
Manufacturer     Realtek
Description     Realtek AC'97 Audio
Device ID     PCI\VEN_8086&DEV_24D5&SUBSYS_75851462&REV_02\3&13C0B0C5&0&FD
Video Card:
Property   Value
Adapter Compatibility     NVIDIA
Adapter RAM     268435456
Description     NVIDIA GeForce FX 5600XT
Installed Display Drivers     nv4_disp.dll
Driver Version     6.14.10.6693
Driver Date     29/10/2004 16:50:00
Video Mode Description     1024 x 768 x 4294967296 colors
DirectX Installation:
Property   Value
Version     6.03.01.0146
Modem:
Property   Value
Network Adapters:
Property   Value
Description     Intel(R) PRO/1000 CT Network Connection - Packet Scheduler Miniport
Description     Packet Scheduler Miniport
Description     Microsoft TV/Video Connection
Description     1394 Net Adapter
Description     1394 Net Adapter
External Ports:
Property   Value
External Reference Designator     Def
External Reference Designator     Sanjoy
Expansion Slots:
Property   Value
Slot Designation     PCI1
Slot Designation     PCI2
Slot Designation     PCI3
Slot Designation     PCI4
Slot Designation     PCI5
Slot Designation     AGP
Copy To Clipboard
I do very much appreciate the help from you all!
Gareth

RCConsole MFC Application has encountered a problem and needs to close

Alright, heres the issue. I am a computer lab admin trying to remote
view workstations in my lab. I am running ConsoleOne from the server,
once i start ConsoleOne I will be able to remote view/control maybe one
or two computers before i get the error "RCConsole MFC Application has
encountered a problem and needs to be closed immediately"
I can fix this by going into the task manager and closing the
RCConsole.exe process. However i might get one or two computers before
it comes back. I searched the internet for a solution to this and heard
that if i copy the ConsoleOne directory from the server to my local
machine it will work. So I did that and yes it did work, however we are
running a diskless boot system and if I were to copy the directory to
the local machine it would be gone as soon as I reboot.
Ive done some random testing and discovered the following
the console one directory is located on the server in
/sys/public/mgmt/consoleone/1.2/bin
i tried copying the console one directory to the root c: and it worked
fine
then i tried copying it to my network drive on the server
/data/home/grastyc/consoleone/1.2/bin and it worked fine
so based on that i tried mapping a drive to /sys/public/mgmt and tried
running it from there, didnt work.
Any help would be much appreciated

Vc++ error messages,fatal errors: Error message: Msvc32i MFC application has encountered a problem and needs to close MFC vc++ c++
Originally Posted by [email protected]
Alright, heres the issue. I am a computer lab admin trying to remote
view workstations in my lab. I am running ConsoleOne from the server,
once i start ConsoleOne I will be able to remote view/control maybe one
or two computers before i get the error "RCConsole MFC Application has
encountered a problem and needs to be closed immediately"
I can fix this by going into the task manager and closing the
RCConsole.exe process. However i might get one or two computers before
it comes back. I searched the internet for a solution to this and heard
that if i copy the ConsoleOne directory from the server to my local
machine it will work. So I did that and yes it did work, however we are
running a diskless boot system and if I were to copy the directory to
the local machine it would be gone as soon as I reboot.
Ive done some random testing and discovered the following
the console one directory is located on the server in
/sys/public/mgmt/consoleone/1.2/bin
i tried copying the console one directory to the root c: and it worked
fine
then i tried copying it to my network drive on the server
/data/home/grastyc/consoleone/1.2/bin and it worked fine
so based on that i tried mapping a drive to /sys/public/mgmt and tried
running it from there, didnt work.
Any help would be much appreciated

Keyhole DRM Application has encountered a problem and needs to close

Every time I try to run one of the games I have downloaded
from Shockwave e.g Ciao Bella I get the error message
"shockwave.com Keyhole DRM Application has encountered an
problem and needs to close".

I am having the same problem. I have done everything that
support has told me and still has not helped. I went ot properties
of my game and the description given is shockwave.com Keyhole DRM
Application. What in the world is going on? No one seems to be able
to help anyone with this problem.

HotSync Manager Application has encountered a problem and needs to close. We are sorry for the inconvenience.

Hello
I have a Palm T|X, running Palm OS Garnet v.5.4.9
Last night, I tried to install ConvertCalc - CodeThought, Inc., the OS5 version, and it blue-screened my desktop. (running XP Pro)
Now, Hotsync Manager won't run - either at boot-up, or if I try to start it manually.
I have un-installed Palm Desktop (v6.2.2), and tried re-installing it, but when it gets to the HotSync Manager, it crashes with the error in the subject line.
Any clues ?
many thanks for your time !
Post relates to: Palm TX
This question was solved.
View Solution.

Based on another thread and a post by WyreNut, I changed to PalmDesktop 4.2 - and am all set ...

"Fast Restore Application has encountered a problem and needs to close.

Just installed the latest thinkvantage updates and am now receiving this message repeatidly. Anyone got an idea on how to get rid of the message

Hey, Guys
I had the same problem after installing Rescue and Recovery V4. I did some research and Fast Restore Application is UPDATEMONITOR.exe. I did a search for this program in XP and it came back as being directly attached to Rescue and Recovery. I then just uninstalled R & R which in turn got rid of UPDATEMONITOR.exe. It's unfortunate that it had to come to uninstalling the software, but doidn so solved the problem for me.
Shaun

Photoshop has encountered a problem and needs to close

I have had the cs4 software about three weeks, Everything has been running perfectly un til this morning. I was attempting to past an image to a vanishing point and got the hourglass/ spinning circle that is was working, then an error message about memory and photoshop needs to close. I closed all other programs and rebooted to attempt to correct whatever issue it had. Now whenever i try to use the program it lags badly with the simplest of tools(quick select) and then i get the photoshop has encountered a problem and needs to close. I am running windows 7, 3GB ram 2.75 usable, anthalon amd 2 dual core m300 2ghz 64 bit,
AMD M880G with ATI Mobility Radeon HD 4200
Can someone please help me figure out how to fix this.

Fault bucket 19706014, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Photoshop.exe
P2: 11.0.2.0
P3: 4bf2d91c
P4: VanishingPoint.8BF
P5: 11.0.0.0
P6: 48d395f1
P7: c0000005
P8: 000000000004a430
P9:
P10:
Attached files:
C:\Users\Johnny\AppData\Local\Temp\WERB71F.tmp.WERInternalMetadata.xml
C:\Users\Johnny\AppData\Local\Temp\WERFBFC.tmp.appcompat.txt
C:\Users\Johnny\AppData\Local\Temp\WER9A4.tmp.mdmp
These files may be available here:
C:\Users\Johnny\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_e 4881f26a567c586252e8667502237add319ee67_0ccd2665
Analysis symbol:
Rechecking for solution: 0
Report Id: c3830bd2-e129-11df-a41a-000272ab905c
Report Status: 9

ITunes has encountered a problem and needs to close

Just downloaded latest version of itunes with quicktime. Won't run. Get the Itunes has encountered a problem and needs to close error to Microsoft message. Have latest Windows XP updates as well as latest Ipod updater. Have Norton Antivirus. Looked at task manager, nothing is running. Please help.

I shutdown my antivirus software(Norton). Downloaded the upgrade iTunes and Quicktime, then downloaded Quicktime by itself.(Don't know if this was necessary, but it worked.) Restarted the Norton. Problem resolved for now.

8.0.2.20 won't load.."iTunes has encountered a problem and needs to close."

I finally gave in to the annoying pop-up and upgraded to 8.0.2.20 from 7.6. Initial load worked fine, connected to ipod and updated it without a problem.
Shutdown computer and tried to load this morning. Now get the "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." I tried to uninstall itunes 8 and revert back to 7.6 but my library was updated by itunes 8 and prevents this reversion.
Now I'm stuck with a lame duck itunes 8 and no way to access itunes. Insight?
Running XP home edition service pack 3

If you want to use iTunes 7, you need to rebuild your library like this:
http://support.apple.com/kb/HT1451
If you wan to troubleshoot iTunes 8, first check to see if Quicktime works. If it works normally then use this trouble shooting method for iTunes.
http://support.apple.com/kb/TS1421
If QUicktime doesn't work describe what happens with any error message.
Have you installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar, (possibly starcodec pack, 3ivx)
If so uninstall them, they are know to cause problems with QUickitme.
Then download the version of Quickime without iTunes:
http://www.apple.com/quicktime/download/win.html
Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
Restart you computer
Install the stand alone Quicktime and check if it starts.
If it does you are in a position to find out if iTunes is OK.

Handheld Application Loader Wizard has encountered a problem and needs to close. We are sorry for the inconvenience.

I keep getting this message when i connect my new Bold 9900 and started getting it on my curve 8330 a couple months ago. I have the newest version of desktop manager 6.0 installed on both my laptop and my PC. The strange thing is it works flawlessly on my laptop, no error messages from either phone. Just got the new Bold last week, plugged it in to PC, same error. I have done alot of reading through the forums and have tried to uninstall and re-install the desktop software 3 or 4 times. Even tried upgrading the OS on the Curve and Bold on the Laptop. Plugged it back into the PC and same problem. I cannot force the Loader.exe to start on PC when I click on it on the C:\program Files/Common Files/Research in Motion/Apploader, crashes right away. Even tired a method that outlines how delete registry entries, etc and tried that. Does anyone have any further ideas or more detailed way to resolve this. Seems to be desktop manager issue as no problems with same devices on laptop.
Solved!
Go to Solution.

Re: Handheld Application Loader Wizard has encountered a problem and needs to close. We are sorry for the inconvenience.
Sorry I will correct the laptop order:
Okay, on my desktop USB controllers:
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
VIA REV 5 or later USB Universal Host Controller
VIA REV 5 or later USB Universal Host Controller
VIA REV 5 or later USB Universal Host Controller
VIA USB Enhanced Host Contoller
On my laptop:
Intel(R) 82801G (ICH7 Family) USB Univeral Host Controller - 27C8
Intel(R) 82801G (ICH7 Family) USB Univeral Host Controller - 27C9
Intel(R) 82801G (ICH7 Family) USB Univeral Host Controller - 27CA
Intel(R) 82801G (ICH7 Family) USB Univeral Host Controller - 27CB
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub

Adobe Captivate has encountered a problem and needs to close. We are sorry for the inconvenience.

I am trying to use Adobe Captivate 5 and I am receiving this message when trying to open the application,
"Adobe® Captivate® has encountered a problem and needs to close. We are sorry for the inconvenience."
Can you explain how this issue can be resolve!?

Hi there,
On which operating system are you using Adobe Captivate?
Please recreate the preferences of Captivate, following is the location of Captivate Preferences:
Windows 7: C:\Users\[user name]\AppData (hidden folder)\Local\Adobe\Adobe Captivate 5 folder
Windows XP: C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe\Adobe Captivate 5 folder
Mac: /Users/[user name]/Library/Preferences/Adobe Captivate 5 folder
rename Captivate 5 to Captivate 5_old
and then try to launch Captivate 5
Thanks.

Adobe Reader 8.0 has encountered a problem and needs to close. We are sorry for the inconvenience

Ver 8 installed fine but can't get it to launch from any application. Have tried going back to earlier versions (6.1,6.2,7) but the same problem occurs.
Same error message each time:
"Adobe Reader 8.0 has encountered a problem and needs to close. We are sorry for the inconvenience"
AppName: acrord32.exe AppVer: 8.0.0.456 ModName: acrord32.dll
ModVer: 8.0.0.456 Offset: 00020916
Tried every troubleshooting tip in the Support Knowledgebase to no avail.
Have been using Reader for years with never any problems and now I can't seem to get this fixed after numerous hours.
Any suggestions would be appreciated. Is there a free support line I can call or is it paid support only?
Thanks,
Dee

Like others my problem was Adobe Reader 8.1.2 died terribly and with a buggy stench with the following error:
AppName: acrord32.exe AppVer: 8.1.0.137 ModName: msvcr70.dll
ModVer: 7.0.9466.0 Offset: 000013d6
RESOLUTION ON XP SP2
1. Control Panel, Users
2. Create a new user account NewUser (for example)
3. Start, Log Off
4. Switch Users to the NewUser
5. Wait the mini eternity for new user to be set up.
6. Start Adobe Acrobat 8.1.2 and you will see a red splash screen along with some license updating things.
7. Adobe 8.1.2 now starts fine under NewUser
8. Switch back to your regular user name. Start, Log off, Switch Users
Now a note to Adobe. Do you folks really have to make this such a frickin pain to get working? Do you at Acrobat have any idea of how much time we users blow and how much of our lives pass by while we try to re-download and work with this product? You are directly responsible for a small slow down in the world economy by this. Get the hint.... create an 8.1.3 that omits the secret code steps above.
The only thing that kept my sanity during this were nice songs on channel 86 on SIRIUS. Thank you SIRIUS.
Thanks,
Jim

"iTunes has encountered a problem and needs to close. We are sorry for the

HI all
I've got know this problem:
""iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." With the option to send error report or don't send.
and the error signature is:AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown
ModVer: 0.0.0.0 Offset: 01a21040
Does anyone know what should i do?
Thanks
Wouiners

I had the same issue. I found a solution under a different thread posted by scubastevee32. It worked for me. I copied pasted his solution below.
after countless hours of dead ends.... I found this to fix the problem(thank you "b noir")
hat one could be being caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
so let's try swapping out your QuickTime.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
HP Pavilion Windows XP Pro

Itunes has encountered a problem and needs to close. we are sorry for the i

ok so i installed itunes and i keep getting that error and it wont let me open itunes. i have uninstalled itunes and quicktime and installed the newest version and an old version as well and this error keeps comeing up. getting pretty ****** because im a college student and i need my music. any help will be apprecitated
here is the error that i get (error signature: appname itunes.exe Appver.7.3.1.3 modname: Unknown ModVer:0.0.0.0 offset 10001040)

thank you Abner!
Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

"(program).exe has encountered a problem and needs to close. We are sorry for the inconvenience."

Hi, I was using Tweetdeck for the past few months without any problems. Recently, the application still works fine.. it opens as normal, all posts I am following appear etc., but when I try to send a tweet the application closes and I get the error
"tweetdeck.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
I uninstalled tweetdeck and reinstalled it many times. Sometimes it would work for twenty minutes, other times not at all. I got fed up trying, so uninstalled it and downloaded Seesmic. This new application opened perfectly, all users I am following and their tweets updated perfectly, until again I went to post a tweet and it closes and I get the error
"seesmic desktop.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
As these are the only two applications I have used that give me this error, and are also the only two applications I have used that are related to Adobe AIR, I can only assume the problem is connected somehow?
I was wondering if any of you might have any suggestions on how I could fix this? I am not the most tech saavy guy, so any help would be greatly appreciated as I am starting to lose patience with it!
Thanks in advance.

You might try uninstalling the AIR runtime and re-installing it. You might also try contacting the developers of these applications to find out whether the problem is related to issues they already know about.

The application has encountered a problem and needs to close

Similar Messages

Maybe you are looking for