The 'application view' window in workshop is empty

Clicked "View" from menu, then "Application", but the window shows up empty, pls
see attached image.
Please let me know how to fix if it's known issue. Thanks.
[workshop_screen.bmp]

Thanks very much Raj.
It solved the problem, and a related one (that I wanted to clean up under "Recent
Applications" menu item.
The file is attached.
"Raj Alagumalai" <[email protected]> wrote:
Glenn,
Deleting .workshop.pref file found in c:\doc settings\username will reset
the view. But before you do that , can you attach the current .workshop.pref
file ?
Thanks
Raj Alagumalai
Backline Workshop Support
"Glenn Li" <[email protected]> wrote in message
news:[email protected]..
Clicked "View" from menu, then "Application", but the window showsup
empty, pls
see attached image.
Please let me know how to fix if it's known issue. Thanks.
[previous.workshop.pref]

Similar Messages

Application Nividia Stream error and warning in the Event Viewer Windows 8.1

Have found the following repeating error and warning in the Event Viewer Windows 8.1 64 bit reg.the application Nividia Stream:
1. The error :
"Can not find the description of event 2001 identification from
the source NvStreamSvc.
Either the component causing this issue is not
installed in the local computer or installation is broken. You can install or
repair the component in the computer.
Information to the event :
NvStreamSvc
Failed continue stopping [6] "
2. The warning :
"Can not find the description of event 2002 identification
from the source NvStreamSvc.
Either the component causing this issue is not
installed in the local computer or installation is broken. You can install or
repair the component in the computer.
Information to the event
NvStreamSvc
SSAU process ID 7820 did not exit, Termination.
[6]”
I would appreciate the advice how to fix it.
Thanks and best regards,
Ewa

Hi,
Thanks for your reply.
Have the lastest updated Nividia driver : version 347.88 - shall I uninstall and install again ?
Shall I make express installation /as usually/ or advanced ?
Reg. Nividia Stream service - shall I disable this service in services.msc ?
The software - now have Nividia GeForce Experience updated to the version 2.4.1.21 on 30th
March.
Would appreciate your further assistance and help.
Thanks and best regards, Ewa

Using Application View controls in Workshop

How can I access a JCA resource adapter in Workshop? The documentation suggests that
I create an Application View in WLI, then create a Workshop control that is associated
with it. However, the Workshop documentation says the following about using Application
View controls:
Note: In this release, the Application View control is supported only in the sample
workshop domain. In future versions, support will be provided for enabling the Application
View control in other domains.
What does this mean for support of this functionality in this release?

Thanks very much Raj.
It solved the problem, and a related one (that I wanted to clean up under "Recent
Applications" menu item.
The file is attached.
"Raj Alagumalai" <[email protected]> wrote:
Glenn,
Deleting .workshop.pref file found in c:\doc settings\username will reset
the view. But before you do that , can you attach the current .workshop.pref
file ?
Thanks
Raj Alagumalai
Backline Workshop Support
"Glenn Li" <[email protected]> wrote in message
news:[email protected]..
Clicked "View" from menu, then "Application", but the window showsup
empty, pls
see attached image.
Please let me know how to fix if it's known issue. Thanks.
[previous.workshop.pref]

Not able to see any of the application,system windows in jdev

Hi everyone,
I am facing a strange problem in jdev 10.1.3.1.I am not able to see any of the application,system and other window.I tried clicking the view button in the toolbar and clicking on the application and system navigator to show off in the window,but there was no luck.I continue to see a blue screen.Even i deleted the jdev10.1.3.1 and installed again the new jdev10.1.3.1 but still then its not showing me the windows.When i tried to explore more clicking Tool->Preferences it gave me the following exception:
java.lang.NullPointerException
     at oracle.tip.tools.ide.tx.addin.MapperOptionsPanel.load(MapperOptionsPanel.java:412)
     at oracle.tip.tools.ide.tx.addin.MapperOptionsPanel.onEntry(MapperOptionsPanel.java:400)
     at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:926)
     at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:899)
     at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java:106)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1348)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1216)
     at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1210)
     at javax.swing.Timer.fireActionPerformed(Timer.java:271)
     at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
     at java.awt.Dialog$1.run(Dialog.java:515)
     at java.awt.Dialog.show(Dialog.java:536)
     at java.awt.Component.show(Component.java:1300)
     at java.awt.Component.setVisible(Component.java:1253)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
     at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:276)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:597)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:391)
     at oracle.ide.cmd.IdeSettingsCommand.doit(IdeSettingsCommand.java:47)
     at oracle.ide.controller.CommandProcessor.invoke(CommandProcessor.java:259)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:541)
     at oracle.ide.controller.IdeAction$1.run(IdeAction.java:772)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:789)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:498)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
I dont have any clue on this.
Please help me in resolving the problem and finding some solution to this.
Thanks & regards

Try and see if this helps:
http://blogs.oracle.com/shay/2006/11/10
Although it seems that just removing JDeveloper and reinstalling from scratch should have done this.

Stopping the applications main window from activating when a child window is clicked

I am building a javascript based AIR application that implements a bastardized growl notifier. When the the application is minimized or in the background you may be notified of a new message. This part works great.
The UI calls for an "X" button to close the the notification window. When I click the "X" the application's main window is activated and brought to the foreground, but the desired behavior is that the main application window stays minimized or backgrounded. I've tried playing around with preventDefault and stopPropagation on mouse click and mouse down events but this doesn't seem to solve the problem. I've also tried to hook into the display state changing event on the nativeWindow to see if I could cancel activation events in this scenario but I wasn't able to get that to work. My last ditch effort was to try and tap into the AIR platform events for mouse click and mouse down, with the rationale that these things are handled in AIR and by the time it gets to the webkit engine, it's already too late, but that didn't seem to work either.
It's completely possible that I'm "missing some mundane detail" and one of these approaches should be sufficient. I've noticed that TweetDeck has the same problem so I'm wondering, is this just an "AIR thing", possibly a bug, or is this expected?
Any help would be greatly appreciated. I can post more information and screenshots if my explanation wasn't clear enough. Thanks for reading.

sloppy code
JMenuitem open;
public actionperformed(event e)
if e.getsource == open
displayframe();
public void displayFrame(){
JFrame = new jframe
frame.pack()
frame.show()
}

Adobe Acrobat as a component of the application in Windows 8 in Metro Style

Hello
I am making an application under Windows 8 in Metro Style.
I try to include in my application PDF-reader.
How can I use Adobe Reader for this purpose.
If I have to buy a license, I'm ready to do it.

Unfortunately, due to limitations of Win8 Metro, you can’t use Adobe Reader in that way.
If you need a PDF viewer/reader component for Win8, you’ll need to license our “Adobe Reader Mobile SDK”.

Customize the Picture-viewing window

Hi, I just purchased iweb and played around with it. It is a really well-made software and I was able to design my first hand-made webpage in a short time.
I just have one question and was wondering if anyone can help me.
When you publish your site to a folder, i am aware that you are not able to use the slideshow palette which comes with .mac.
Instead, you will get a viewing window when you click on a photo on your page.
The viewing page comes with arrows that allows you to go through your gallery and has a white background. Is there anyway to change the backgroud color from white to black??
I know that when you publish your site to a folder, you end up with a folder named "slideshow_assets". The folder contains all the components that are used to display the viewing window.
Please let me know if someone have any idea how to change the background color, Thank you

When I published my site using .Mac homepage, the slideshow did, in fact, have a white background as you point out here. When I upgraded to iPhoto 6 and iWeb, the slideshows now appear with a black background. I don't know that this is the answer ... but you may want to check your version of iPhoto that you are using to view the site. It seems to me the slideshow is dependent upon the viewer on the visitor's computer ...

Crystal Reports XI - Display multiple reports in the same viewer window

Post Author: crystal_dev
CA Forum: General
Hello,
We recently upgraded from CR 8 to CR XI. In CR 8, we were able to display multiple RPT files in the same run time viewe window and the reports would display in different tabs. However, we are not able to accomplish the same in the CR XI version of the crviewer.dll. Each report comes up in a different viewer windows which can be quite annoying to the user.
Any way to do this in CR XI?
Thanks.

Hi Smitha,
Wow - complicated reporting structure! What the business wants can be done by creating direct reporting relationships between the positions - using the "005" relationship. However, this is complicated and is difficult to maintain as there are probably frequent changes to this structure. Also difficult to control if there are three chiefs in one org - who would approve vacations, pay raises or expense reports in Org Unit 1? Per this structure any of the three could without consulting the others (all chiefs are equal).
Recommended: Five separate Org Units - One for each Chief. Org 1 has Position S1; Org unit 2 has position S2 as Chief and and position S5. Org unit 3 has S3 as chief and S7 and S8 reporting to him; Org Unit 4 has S4 as chief; Org Unit 5 reports to Org Unit 4 and has S5 as Chief with S6 and S7 reporting to him. You have S7 and S5 reporting to two different chiefs. You may have a "dotted line" relationship for functional reports, but again recommend that there be only one individual who can grant pay increases, approve vacations, etc. The dotted line or functional relationship can be handled via a "Matrix" relationship.
You and the business will have to sit down and decide the real "reporting" structure of this organization. "Who reports to whom" and then build the structure around that. You should not reproduce the structure as it has been just because many years ago with another system someone created a bunch of boxes. SAP is flexible enough to handle any reporting structure, but for ease of maintenance, understandabilty, adaptability to Workflow and flexibility, please try to use the standard structure of Org Units with one chief and separate Org Units reporting to that one each with its own chief.
Paul

Can I display the File name at the bottom of the Grid view window?

Dang. I'm probably going to catch some flak for this... but I can't find where this bone is buried. When the main viewer is in grid mode, the bottom of the window says "1 selected - 9 items displayed" or something to that effect. Is there a way to replace that with the name of the file(s) that is currently selected?
I have searched the manual and tried many of the Metadata display options and can get all kinds of info to show up when double clicking to bring that image full screen. But I'd like to see its name when simply selected in the grid view.
Obviously that info is available in the Info pane to the left. But when doing basic organizing, I like to leave that side on the Library pane.
Screen grab for the situation I am talking about:
Thank you!
Bo

Bo,
I have no idea, if it would be possible to change the caption in the line below the grid.
But why not add the filename of each image to the grid view like this?
Edit the metadata for the Gridview (expanded or basic) to include the "File name" and arrange the display order to show the Filename first. This way you will see it bleow each image.
Another way to alway see the filename would be to set the Metadata Tooltip to include the filename, and to enable the tooltip, when you are using grid view.
Regards
Léonie

Version 5.0 will not unload itself from memory when I close it. This results in not being able to open FF later unless I manually go and close the application in Windows task manager. Any ideas as this is getting very frustrating.

I have this issue on 3 computers that were just updated with FF 5.0. When I close FF, the application "Firefox.exe *32" remains in memory. Trying to open FF again later greets me with the error that FF can't open because another instance of FF is already running. Previous versions did unload completely and never caused this issue..

I found the culprit. Norton Internet Security added an add-on to FF called Symantic IPS 2.0 which is causing FF 5 not to close properly. I have no idea what it is for but FF works properly again with it disabled.
For reference, that add-on worked fine with FF 3.x as well as FF 4.x. It just doesn't seem to like FF 5.0.

Need help finding the applications in Windows 8.

i have downloaded the creative cloud and installed photoshop and illustrator cc but can't open them? i have been stuck for some hours now. i need help please?

Hello. You are running Windows 8?
You need to navigate to your applications.
Hit the windows key on your keyboard, you should see the start screen, where Lightroom and Photoshop should be. You can right-click on them to pin them to the task bar.

Audio but NO images show - black screen -up in the canvas viewer window????

Hi all,
I'm a newbie having problems with a file in FCP where the audio plays and but no image shows up in the Canvas window. I imported the audio from my camera and had some kind of a problem in the browser window where the sequence didn't show up with the actual length of time...it read 00:00:00. I reimported the quicktime file into FCP Express, and then it showed up fine. When I reopened it in FC Pro, this time, the sequence shows the full amount of time of the file, but I'm still getting all black in the canvas window. I'm at a loss to explain this. I have a feeling I did something wrong during the initial import, and so the actual source file is somehow corrupted. But when I open the source file in quicktime, it plays fine. It's only within FCP that it's all dark.
Help!!!!!
Thanks in advance
Message was edited by: Gary King3

sounds like you do not have a source file that FCP recognizes.
What camera and what codec does it shoot? did you convert to a prores or standard QT format before or after ingesting?
bogiesan

Mail (v6.6) on OS X10.8.5 clears the Message Viewer window when any message is dragged to the Attended To folder

Hi Folks,
We have an annoying behaviour in Mail 6.6 on one work station. When any message is dragged to a folder such as the one for Attended To mail, other messages in the InBox vanish, but reappear when Mail is Quit then reopened.
Other workstations do not exhibit this behaviour. We cannot find any setting whichmight have become corrupted.
Should we merely delete the Preference file?
Thanks in Advance,
John

A possible fix is to select the Attend To folder in mail then on the menu bar Select Mailbox > Rebuild. Then if that does not solve the problem rather than deleting the preference file...
Quit Mail
Drag the preference file to the desktop
restart Mail
If the problem persists quit mail and restore the preference file to ~/Library/Preferences and you will not have to recreate the preferences from scratch.

How to fix the positions of two Mail.app viewer windows on the screen?

I use Mail.app as my main IMAP Mail application. I work with two Mail viewer windows which I position on the screen so that the upper window shows the Inbox and the lower window the Send-box. The windows are aligned to each other and do not overlap. Fine.
But when I quit Mail.app and open the program again, the windows have forgotten their postions. They "jump" to a new location on the screen. This is in contrast to all other applications I use. Another bad example of window managment is the Mail.app-Preferences window which also does not stick to a given position.
Is this a (known?) bug or does it only happen on my Macs? (two: one in the office, one at home, both running 10.4.6)

I guess the difference is that my description text is longer.
Try this text for a new rule:
"From: blacklisted senders 1 - move to SPAM-blacklisted-addresses"
When you want to see this text completely with the default font, you will need to enlarge the Preferences window for "Rules". After that, click to "Signatures": the window stays at the enlarged width. Then click on any of the other areas in Preferences, and the window goes back to the "normal" width. When you then click on either "Signatures" or "Rules", the Preferences window will stay at the "normal" width (resulting in a truncated display of the rule description text).
Also: when you have moved the Preferences window to a position not covered by a (large) viewer window to access it with a mouse click, close the window and re-open Preferences, it is back to a position covered by the viewer window. Again not accessible when the viewer window is the front-most Mail.app window. BTW: the "Activity viewer" window does a better job in sticking to a fix position.

Error when deploy the Planning SampAp application view

When deploying, the job console shows:
Started Time : 2008年3月4日 13:23:49
Submitted Time : 2008年3月4日 13:23:49
Last Updated Time : 2008年3月4日 13:23:52
User Name : admin
Process Name :
Thread : 0
Server : DimServer
Detail : Initiating Product Action...
Inspecting Deployment History...
Generating Headers and Callback Information...
Generating Application Data...
Preparing Product Request...
Posting Product Request...
Product Response:200...
Waiting For Status Updates...
and it was stocked at 9%. After a while, the job console showed:
Started Time : 2008年3月4日 11:41:34
Submitted Time : 2008年3月4日 11:41:34
Last Updated Time : 2008年3月4日 11:46:45
User Name : admin
Process Name :
Thread : 0
Server : DimServer
Detail : App Creation failed with Exceptioncom.hyperion.planning.HspRuntimeException: Unable to locate dimension information to load. Dimension: Currency at com.hyperion.planning.HspDimensionLoader.parseModelForPlanningDimen(Unknown Source) at com.hyperion.planning.HspDimensionLoader.parseModelForPlanningDimen(Unknown Source) at com.hyperion.planning.HspDimensionLoader.parse(Unknown Source) at com.hyperion.planning.HspDimensionLoader.load(Unknown Source) at com.hyperion.planning.HspDimensionLoader.load(Unknown Source) at com.hyperion.planning.utils.HspApplicationCreator.loadOutline(Unknown Source) at com.hyperion.planning.utils.HspApplicationCreator.load(Unknown Source) at com.hyperion.planning.utils.HspApplicationCreator.createApplication(Unknown Source) at com.hyperion.planning.appdeploy.HspAppDefinition.deployAppFromXML(Unknown Source) at com.hyperion.planning.appdeploy.HspAppDefinition.access$000(Unknown Source) at com.hyperion.planning.appdeploy.HspAppDefinition$1.run(Unknown Source)
I've created a new datasource for this app, but still faced the same problem.
PS: I also found some error when validate the SampAp application view, so I've changed it a little. I don't know if the application view design may cause this problem. Thanks for your reply.

Hi,
From another post which I think relates to same sort of issue the solution was :-
On your server > Change your "Standards and formats" into English(United States) in "Regional and Language Options".
This was due to the currency format being in chinese.
Cheers
John

The 'application view' window in workshop is empty

Similar Messages

Maybe you are looking for