The apps on my macbook are not working!

I cannot open the apps set on the dock! When I try to open skype or spotify.. my mac doen't do anything.

Try going to Finder and opening them from the Application folder. If that works replace the bad ones with the one from the application folder onto the dock

Similar Messages

  • The icons in MacBook are not working

    Hi,
    The desktop icons in my MacBook are not working and this force me to use FILE --> New finder window to open the Safari etc... How do I make my icons work from desktop. Appreciate your help.  Thanks.
    Ananth

    Each version of Extension Manager only installs/manages extensions for the same suite of products. EM CS6 only installs extensions for DW CS6. To install extensions for DW CS5, you should launch EM CS5 to install it. Note that you have to update EM CS5 to 5.0.3 before you launch EM CS5 in Mac 10.8, otherwise EM CS5 will crash due to Mac API change. You can use Adobe Application Manager to update EM CS5 or download and run http://download.macromedia.com/pub/dw_exchange/extension_manager/mac/AdobeExtensionManager _5_0_3_mul_AdobeUpdate.dmg which can be found at http://www.adobe.com/downloads/updates/.

  • TS1702 Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Any suggestions

    Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Has anyone got any suggestions. Thanks

    If you don't tell us what solutions you've already taken, we're probably going to waste a lot of time telling you to do things you've already done.

  • I updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

    i updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

    Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

  • Looks like updates via the App. store update option is not working again. Comments?

    Looks like updates via the App. store update option is not working again. Comments?

    There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
    Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

  • Some keys on my MacBook are not working

    Some keys on my MacBook are not working. For example, the "b" is not working. But when I turn on capslock it will type "B". Any ideas???

    Try resetting your SMC and tell me if that works     http://support.apple.com/kb/HT3964

  • The buttons of my ipod are not working, that means that i cant enter because the scream is black, what can i do???? thanks, the buttons of my ipod are not working, that means that i cant enter because the scream is black, what can i do???? thanks

    the buttons of my ipod are not working, that means i cant use the ipod because the scream is black and i need press one of that buttons for use it, what can i do? thanks

    You will need to get it serviced.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

    all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
    So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I downloaded iSpeakit from the app store. It does not work. How do I get my money back?

    I downloaded iSpeakit from the app store. It does not work. How do I get my money back?

    First, contact the developer for support and suggestions. If they cannot or will not help, go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • "Validation" enabled for the composite and my testsuites are not working

    I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
    I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
    then it works and the process will be completed.
    But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
    I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
    Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
    I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.

    Hello there, RevDebMN.
    The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Particularly useful, in your case:
    Mail Connection Doctor shows one or more red dots () in the account Status column
    Check your Incoming IMAP or POP and Outgoing SMTP email account settings
    Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
    After you have the correct email service provider settings, make sure Mail is configured properly.
    Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
    What alert message is shown in the Mail Connection Doctor "Details" column affected account?
    Click here if a "Could not connect to this (server type) server…" message appears
    Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
    If the issue persists, then you'll want to remove the account and then add it again using this article:
    Mail (Mountain Lion): Remove accounts
    http://support.apple.com/kb/PH11794
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.

    I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.

    I updated to Firefox 4.01 today and the middle scroll button on my Lenovo T400 stopped working. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 from here http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html and then uninstalled the "Thinkpad Ultranav Driver" from Add/Remove programs rebooted and then installed the updated utility and driver (another reboot) and it now works perfectly.
    So glad to get this working again.

  • Some of the services of ITS 640 are not working

    Hi All,
    I have implemented SAP NW 04 SR 1 Portal and integrated SRM 4.0(EBP 5.0).I have also implemented Business Package for mySAP SRM 4.0 60.2.
    I am using internal ITS for HTML GUI.
    Some of the iviews of the business packages  are working but some of them are not.
    I am getting an error message
    "The URL http://g4kwas642.corp.rwdtech.com:8050/sap/bc/gui/sap/its/bbpsc05/! was not called due to an error.
    Note
    The following error text was processed in the system SRM : Attribute for user PBHONDELE contains errors. Inform system admin.
    The error occurred on the application server g4kwas642_SRM_50 and in the work process 0 .
    The termination type was: TH_RES_FREE
    The ABAP call stack was:
    Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
    Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
    Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS"
    I have published all the services that are under SICF.
    I had also published all the services using w3_publish_services and siac_publish_all_int.
    It says that all the services are succesfully published.
    When I  go to SICf to test the service,some of them are not working.
    Can you guys tell me what are the steps that I am missing?
    Thanks,
    Paritosh

    I am also getting the same th_res_free error..
    I have installed nw04 sr1 and trying to run ESS on it.
    My problem is, i have installed sap WAS 6.4 on different machine and R/3 on different machine..
    So now.. where i have WAS.. does not have all the services. All services are there on R/3 server..
    Now how do i publish the services on WAS 6.4??
    Coz that option to publish on INTERNAL site is not coming on my R/3 (4.7) as it does not have WAS 6.4.. its on different machine.
    Please tell me what can be done in this case.
    I cant create a R/3 transaction iView using webgui because of this. my Web gui service on WAS 6.4 runs fine whne i test it in SICF .. but not in Iview..
    Please help me out .. i dont want to install a ITS on another machine which is simple solution..

  • My phone was stolen, what can I do to recover? He is off then the app "Find My iPhone" is not working. I'm desperate, because not even finished paying and is ma warranty.

    My phone was stolen, what can I do to recover? He is off then the app "Find My iPhone" is not working. I'm desperate, because not even finished paying and is ma warranty.

    For Find My Phone to work, you must first turn it on in Settings > iCloud before the iPhone is stolen, and the iPhone MUST be turned on and connected with the Internet.  If not, it is not possible to locate it.  Report the theft to the police, change all passwords associated with accounts on the iPhone, contact your carrier in case the can blacklist it.

  • HT1430 iPhone 4s keypad the "o" and return button are not working - solutions?

    iPhone 4s keypad, the "o" and the return button are not working. Upgraded the software, now the "o" works in the verticle position only, and the return works in the horizontal position only. Help!

    Hi, VRS77. 
    Thank you for visiting Apple Support Communities. 
    I would start with closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.  Test the results after processing these steps.
    iOS: Force an app to close
    If the issue persists, here are a couple addition troubleshooting steps I could recommend. 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Hope that helps,
    Jason H. 

Maybe you are looking for