The attempt to burn a disc failed...error 4310

Everytime I try and burn songs on a cd from one of my playlists, the cd burner will complete 7 or 8 songs and then give me the following error message:
The attempt to burn a disc failed. An unknown error occured (4310)
I updated iTunes to it's newest version and I'm still having the same problem. It will never burn more then 8 songs and occasionally it will give me this message before it even finishes one song. This is VERY frusterating and I've ruined countless blank cd's trying to get this to work!
I also tried looking at other topics on this board from people with the same problem but my question was not answered.
Please Help!
-Isaac
CD Diagnostics-
Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
Dell Computer Corporation XPS-Z
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Cdr4_2K (5.3.2.31),
UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (5.3.2.31),
Video Driver: 32MB DDR NVIDIA GeForce2 GTS (Dell)\GeForce2 GTS
IDE\DiskWDCWD800JB-00JJA0_____________________05.01C05, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYCD-RW__CRX160E_____________________1.0g___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY CD-RW CRX160E, Rev 1.0g
Audio CD in drive.
Found 12 songs on CD, playing time 45:30 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:35:32
Track 3, start time 07:44:61
Track 4, start time 11:54:54
Track 5, start time 15:40:30
Track 6, start time 19:13:02
Track 7, start time 22:27:50
Track 8, start time 26:42:37
Track 9, start time 29:09:66
Track 10, start time 33:01:05
Track 11, start time 36:12:03
Track 12, start time 40:31:62
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 1 2 4 8 10 12.
The drive CDRW speeds are: 1 2.

Hello bannahmontana
The article below will get you on your way to isolate the issue.
iTunes for Windows: iTunes Diagnostics, CD/DVD Drive Tests
http://support.apple.com/kb/HT1567
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Similar Messages

  • I got an error message while burning a cd in itunes - "The attempt to burn a disc failed.  The burn failed because of a medium write error.  What is that and how can i fix it?t

    I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean and how do I fix it?

    The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • The attempt to burn a disc failed. An Unknown error occurred

    "The attempt to burn a disc failed. An Unknown error occurred (4450)"
    This is the error message I get when I try to burn a CD.
    This PC IS authorized.
    These files have not been burned before.
    This is a new Dell Dimension 9100 DVD/RW
    I've burned CDs successfully on my laptop. So not sure why I can't do it on my new desktop?
    Help?

    hi neocat!
    sometimes this message also shows up when your PC doesn't like a particular type of media. See:
    william nehart, "4450 Error while burning" #17, 07:24pm Jul 19, 2005 CDT
    love, b

  • The attempt to burn a disc failed. An unknown error occurred (-50)

    Hey Guys,
    Got the error message "The attempt to burn a disc failed. An unknown error occurred (-50) in iTunes.
    I'm just trying to burn a few audio CDs.
    Running most current verison of Mavericks, all software up to date.
    I've tried changing the burning speeds from Maximum Possible, to 12x, 8x, 4x. Still get the error.
    I've tried 3 brands of CD-Rs get the error on all 3.
    Any suggestions?
    Thx
    CD

    Error -50 is a very unhelpful generic communications error with a number of possible causes.  Something between the drive to which you are downloading and the drive from which it is all coming is not working correctly, which probably leaves several hundred options.
    Have you tried simply restarting the computer?

  • The attempt to burn a disc failed. An unknown error occurred (4310).

    I have been able to burn CDs from music I bought off iTunes. I haven't had any problems until now.
    I just purchased Mike Doughty's Haughty Melodic, the whole album. Everytime it gets almost done burning, it gives this error:
    "The attempt to burn a disc failed. An unknown error occurred (4310)."
    I have wasted 3 blank CDs trying to burn this. I have a lot of experience with computers, I know there is nothing wrong with my hardware.
    Is this is a problem with one of the files? Is there some kind of sub-routine that iTunes runs when trying to burn a CD? I have no idea why this is happening.
    Anyone have some advice?
    Thanks
    pimp   Windows 2000  

    Hello bannahmontana
    The article below will get you on your way to isolate the issue.
    iTunes for Windows: iTunes Diagnostics, CD/DVD Drive Tests
    http://support.apple.com/kb/HT1567
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • The Attempt to burn a disc failed. An unknow error occurred (4000)

    Itunes will start to burn and then stop and state that
    "the Attempt to burn a disc failed. An unknow error occurred (4000)"
    while burning a data Dvd back up
    Here is the Run CD Diag
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    MSI MS-6712
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: Cdr4_xp (7.5.0.50),
    UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (7.5.0.50),
    Video Driver: NVIDIA GeForce4 MX 440\GeForce4 MX 440
    IDE\DiskWDCWD800JB-00ETA0_____________________77.07W77, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomJLMSXJ-HD166S__________________________DS1A___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomLITE-ONDVDRW_SOHW-1633S________________BS0K___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: JLMS XJ-HD166S, Rev DS1A
    Drive is empty.
    E: LITE-ON DVDRW SOHW-1633S, Rev BS0K
    Audio CD in drive.
    Found 14 songs on CD, playing time 56:45 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 06:28:04
    Track 3, start time 09:32:06
    Track 4, start time 13:04:38
    Track 5, start time 16:57:06
    Track 6, start time 20:43:48
    Track 7, start time 23:48:03
    Track 8, start time 29:28:09
    Track 9, start time 34:28:49
    Track 10, start time 37:45:69
    Track 11, start time 41:23:33
    Track 12, start time 44:45:19
    Track 13, start time 47:53:52
    Track 14, start time 51:19:58
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 16 24 32 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8 16 24 32 40 48.
    The drive DVDRW speeds are: 8 16 24 32 40 48.
    The last failed data CD or DVD burn had error code 4000(0x00000fa0). It happened on drive E: LITE-ON DVDRW SOHW-1633S on DVD+R media at speed 16X.
    please help
    Clone   Windows XP  

    try this...
    This is how I managed to fix the problem...and I hope this helps others in the similar situation.
    I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
    I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
    I hope this will help others who are having problems to burn stuff on iTunes.

  • The attempt to burn a disc failed, unknown error (261). Can't back up to CD

    The attempt to burn a disc failed, unknown error (261). I get this message every time I try to back up my music from itunes on to a CD. It doesn't matter if I try to back up all music or only music purchased from itunes. So far I have not been able to back up anything. Can someone please help me!!!! I have tried everything on the support website from apple, and nothing has worked. I am beginning to get very frustrated.
    Thanks

    +I know my computer is up to date on firmware, because I just bought this laptop 4 months ago - it's a brand new Dell Inspiron 1721.+
    Actually, in that case I definitely think you should check your firmware. I just had a look at the 32-bit Vista downloads page at Dell for your Inspiron 1721, and there's firmware updates listed there for four different drive models, all dated within the last four months.
    Head to the following Dell page and enter your model information to get to your Downloads page:
    Dell drivers and downloads

  • The attempt to burn a disc failed, unknown error (261) Can't back up on CD

    The attempt to burn a disc failed, unknown error (261). I get this message every time I try to back up my music from itunes on to a CD. It doesn't matter if I try to back up all music or only music purchased from itunes. So far I have not been able to back up anything. Can someone please help me!!!! I have tried everything on the support website from apple, and nothing has worked. I am beginning to get very frustrated.
    Thanks

    +I know my computer is up to date on firmware, because I just bought this laptop 4 months ago - it's a brand new Dell Inspiron 1721.+
    Actually, in that case I definitely think you should check your firmware. I just had a look at the 32-bit Vista downloads page at Dell for your Inspiron 1721, and there's firmware updates listed there for four different drive models, all dated within the last four months.
    Head to the following Dell page and enter your model information to get to your Downloads page:
    Dell drivers and downloads

  • Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'.  This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes.  Any ideas?

    Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'.  This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes.  Any ideas?

    try this...
    This is how I managed to fix the problem...and I hope this helps others in the similar situation.
    I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
    I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
    I hope this will help others who are having problems to burn stuff on iTunes.

  • I can't burn cd. When I try to burn a cd a message states "The attempt to burn a disc failed. An unknown error occurred. (4450) Anyone know what this means and how to repair it?

    I can't burn a cd from my ITunes playlist. When I try to burn a cd a message states "The attempt to burn a disc failed. An unknown error occurred. (4450)" How can I correct an unknown error?

    Hello rcrown01,
    The following articles can help get iTunes back to burning.
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Cheers,
    Allen

  • TS1436 I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd:  "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What is a "medium write error" and how can I deal with this?

    I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd:  "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What is a "medium write error" and how can I deal with this?

    Hello Pat,
    The following article provides troublehsooting steps and information that can help get iTunes burning discs again.
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    Cheers,
    Allen

  • HT1751 On an old Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean?  And how do I work around it?

    On an older Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean?  And how do I work around it?

    I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
    I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

  • I own an eMac. I really enjoy burning my iTunes playlists to a cd. But, now an error message pops up just after iTunes prepares the disc for burning.The message states this: The attempt to burn a disc failed. An unknown error occurred (-3). Any advice?

    Hey everyone! So, here is my problem. I own an eMac. I enjoy burning my iTunes playlists to a CD. Well, all of a sudden, right after iTunes prepares the disc for burning an error message pops up and says this: The attempt to burn a disc failed. An unknown error occurred (-3). Any suggestions on how to correct this problen so I can continue burning my playlists???
    Thanks,
                   broshane

    Hi, I'e never heard of that error before!???
    Is this purchased music, or your own music files?

  • Mac mini error message: The attempt to burn a disc failed. Help

    Hi,
    I'm not sure what has happened but I have tried to burn a CD and a DVD and have received the same error on both occassions, which read:
    "The attempt to burn a disc failed. The deviced failed to calibrate the laser power level for this media."
    I'm not sure where to start to troubleshoot this. My mac mini is several years old now and in the past I have been able to burn both CDs and DVDs. Please help.
    Thanks
    Bianca

    Calibration failures may indicate a dirty drive or a defective drive. Obviously the cheaper and easier thing to try first is to clean (or have cleaned) the drive.

Maybe you are looking for

  • Auto-resizing all components

    Is there a method that auto resizes all components on a JFrame when it is maximised for example. I have got a JTable (in a scrollpane) and some other components on a panel. I have sized the frame to be approx 80% of the screen size. When the frame is

  • Mouse keeps freezing

    I'm not sure by my mouse keeps freezing on me, and today I was working on a track in Logic 7, and the mouse got stuck, and the music got stuck too, and just sound like a fast broken record. Replaying the same spot for like 2-3 seconds. I'm getting re

  • Validation widget don't work in regions?

    Is it true, Validation Widget don't work in regions? If I create a text validation widget, then wrap it in a region for xml data, the validation no longer functions for the widget. Is there something I'm missing here, or does it simply not work in th

  • Gallery freezing

    I have only had my phone since the end of December and it has recently started to freeze whenever I open the Gallery to view photos. I will open the gallery, it will start populate and then will stop. I can't get out of the application, close it or d

  • Can a service material be configurable?

    I want to onfigure a service material and I want to define the characteristics of that particular service material in the case of a variant configuration.