The attempt to burn a disc failed. The disc could not be read from or written to.

I am trying to burn a cd after upgrading to itunes 12 and this message keeps coming up."The attempt to burn a disc failed. The disc could not be read from or written to." there is no problem with my hardware since I can burn cds using nero. Please help. Thanks

Here is a solution that worked for me!
1. Uninstall iTunes 12
2. Download and install iTunes 11.4
3. Run iTunes 11.4. You will get a message that the library was created by a newer version. Just dismiss the message.
4. Uninstall iTunes 11.4
5. Install iTunes 12.0.1 again. This time disc burning should be working.
(The prior installation of 11.4 fixes the issue)
I hope this works for you as well
Note
My iTunes 12.0.1 installation was a fresh one to start with. I am using the x64 version on Windows 8.1 x64.

Similar Messages

  • Attempting to copy the disk "IPOD" failed. Disk could not be read from or written to?

    So.....
    I own a 5th genereation Ipod Nano. On a windows PC.
    On my iTunes all my music and playlists exist. On my actual Ipod it only shows 3/4 of my music (for some reason it wont sync the rest). It also shows zero playlists on my Ipod. I now cant sync new music onto the device, despite it showing up on my library. Also I've noticed that for some reason the artwork is messed up e.g. the artwork for Aerosmith is now showing up when a Thin Lizzy song plays :S
    I have tried restoring to to factory setting but got the same error message!
    Please please please can somebody help me fix it!!!!!!!!!!!!!!!

    Have you worked through the suggestions in this Apple support document yet?
    'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    B-rock

  • "updating ipod failed..files could not be read from or written to+

    help!! this is the message that appears everytime we try to add a song to the ipodshuffle on itunes.
    we have updated itunes, the ipods and windows and nothing is working.
    we even restored the ipod to factory settings and it still wont work properly!!!this message appears everytime we drag a song to the ipod
    this is happening with both ipods shuffles that we have but not with the ipod nano
    could someone please help with this problem PLEASE

    Hi.
    The scenario will be - "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod..
    In this case we need to try all the steps mentioned in the Apple article number - 301267..
    The link is http://docs.info.apple.com/article.html?artnum=301267..
    I will list out thr steps for convenience...
    1. Plug the iPod directly to the USB removing all other devices connected..
    2. Open "My computer" -> Right click on removable drive meant for IPod and select format 32..
    3. Then Restore the IPod back to factory settings..
    4. Then unp[lug the IPOd, Reset it and then try transferring songs onto iPod
    Please revert back on clarifications..

  • I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

    I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
    I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
    Thanks.

    Hi rossfrombluffton,
    Welcome to the Support Communities!  The resource below provides some general things to consider when burning a disc with iTunes.  I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
    Can't burn a CD in iTunes for Windows - Apple Support
    http://support.apple.com/en-ae/HT203173
    Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
    Update iTunes
    Download and install the latest version of iTunes for Windows.Check for unauthorized songs
    iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
    To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
    If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
    If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
    To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
    Check how many times you've burned the playlist
    An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
    Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
    For additional troubleshooting, please see these steps:
    Additional troubleshooting tips for burning issues
    iTunes for Windows doesn't recognize my audio CDs
    Last Modified: Feb 3, 2015
    Have a good day ...
    - Judy

  • I installed new windows 8, ever since then all of my I-pods, which I have 5 different ones from various  years are stating "attempting to copy to the disk, then name of the I-pod failed. The disk could not be read from or written to".

    All of my I-pods are stating " attempting to copy to the disk failed. the disk could not be read from or written to. I have 5 different I-pods of various years and all of them are saying  that. I also reset a few and  still the same problem.

    https://discussions.apple.com/thread/4474821?start=0&tstart=0

  • How can i fix this for my iPhone4? "attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to. "

    i keep gettign this message when trying to drag music in itunes.
    attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to.

    Can apply to iPhone as well >    'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    If you are using a Windows based computer >  iTunes for Windows: Gathering and using iTunes Diagnostics
    Ignore:  To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.

  • HT1449 Help! This all runs quite smoothly until i get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.'  Any suggestions? Thank you!

    Help! This all runs quite smoothly until I get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.'  Any suggestions? Thank you!

    I had similar problems, it was a nightmare and on a 3 month ipod too!. I use a Powerbook G4 at home and a G5 at work - both were returning the same problems. so I sent it off to apple, they quickly sent it back saying there was nothing wrong with and it didn't need to be repaired. I tried it again and the same problems occurred "disc cannot be written to or read from." I could copy 20 songs onto it at the very most. A couple of guys at my work suggested updating it on a PC, then adding tunes via my mac as normal - guess what!? it works a treat!?. How ridiculous is that!? an Apple product works best on a PC. these generations of ipods are obviously designed to work best on Intel based Macs. What is wrong Apple? are you abandoning the G-generation!? still, atleast my ipod works for now - it will prove a problem when I have to update the iPod's software since I don't own a PC or an intel-based Mac.

  • Attempting to copy to the disk failed. The disk could not be read from or written to", and "itunes could not copy to the ipod because the file could not be read or written" WTH?

    I recently bought my son who is special needs an iPod shuffle gen 4 and nothing but complications.  I kept getting error message saying it could not be read from or written to.  Then it would not even charge up.  I let ig charge on computer for 6 hours it turned green.  Then I went to check it out and it went to orange then nothing.  So, I took it back to the storea and got another.  I am home excited for my son and nothing it is doing the same thing!  Someone please help me I am ready to swear off iPod period!

    I had this issue and couldn't figure out what it was for the life of me. I am running windows 7 and the latest version of itunes. I tried multiple reinstalls of itunes and restores of the ipod. I finally got it fixed by following this guide.
    http://support.apple.com/kb/TS1539
    Apparently there was an issue with my .dll files. Hope this helps.

  • "The disc could not be read from or written to"

    I have a 80G Classic and when I tryed to sync it with iTunes for the first time I got this message "Attempting to copy the disc Classic (iPod) failed. The disc could not be read from or written to. I have restored and rebooted the iPod and the Mac. When I synced it again it synced for a while and put one album plus calendar and contacts on the iPod, then the same massaged appeared and the sync stopped. Any ideas please?

    See if this troubleshooting article helps.
    Disk cannot be read from or written to error syncing iPod in iTunes.

  • Moving library to external hard drive and get the error "Copying files failed. The disk could not be read from or written to"

    Hello,
    I'm moving my library to an external hard drive.
    I've made sure to use the 'Keep iTunes Media Folder Organized' option when pointing to the new library location.
    I select 'File'->'Library'->'Organize Library', I select to 'Consolidate Files', click 'OK' and get ther error message "Copying files failed. The disk could not be read from or written to".
    I've read elsewhere that there may be a corrupted file that I need to sequester somehow and perhaps add it back however I'm not certain how I can locate that file because the status window doesn't indicate which file it's attempting to transfer when the error appears.
    Any tips?
    Thank you,
    Greg H
    iTunes 10.6.3

    OK I figured it out!
    It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
    I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
    Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
    Very happy to solve this problem after 3 weeks.

  • Error "COPYING MUSIC FAILED. The disk could not be read from or written to"

    After following the procedurest to move the iTunes music, the computer started whirring away, happily copying and consolidating all the song files to the new target folder.
    After copying 68gigs of 130gigs perfectly, it stopped dead and the following iTunes error message appeared:
    "COPYING MUSIC FAILED. THE DISK COULD NOT BE READ FROM OR WRITTEN TO"
    I am copying to an external LaCie 500g hard disk, and the current music file is split between folders on the laptop and folders and a 2nd external LaCie Hard disk. It did not appear to have any problems copying and consolidating files from both locations, until the error message showed up.
    How can I solve this?
    I really need to consolidate this music file.
    macbook pro   Mac OS X (10.4.6)  

    OK I figured it out!
    It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
    I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
    Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
    Very happy to solve this problem after 3 weeks.

  • HT1449 copying files failed. the disk could not be read from or written to.

    Im moving my iTunes to an external hard drive. Its moved about half already and Im now getting this error. I have no idea what file its getting stuck on so I cant remove that file. When I restart it it will say preparing to copy then I get the error right away. I dont want to delete the extrenal and start over if I dont have to.

    Ive already changed the location for my itunes media to my extrenal hard drive so when i click to consolidate files Im getting the error
    copying files failed. the disk could not be read from or written to

  • Copying Music failed. The disk could not be read from or written to.

    I just added a server to my home network. It's called "DELLSEVER" and is networked via TCP/IP on a Windows Network. I can copy files to and from it no problem. I created a shared folder on the server with public read/write access and no password called "Music".
    I wanted to move my iTunes music folder (~110GB) to the server's Music folder.
    I followed the instruction found on this forum and went into iTunes(6.0.4.2) preferences -> Advenced -> Itunes Music folder location -> clicked Change -> selected the directory from the available list -> clicked ok.
    Under "iTunes Music folder location" it now says "\\DELLSERVER\Music\iTunes", and clicked ok to close the preferences.
    I then clicked Advanced -> Consolidate Library -> Consolidate.
    I then get the error "Copying Music failed. The disk could not be read from or written to."
    I then tried to manually copy my library from dragging the folded from my PC to the server. That worked fine, but I can't get iTunes to use the server's copy of the music, it keeps going back to my PC's copy.
    Please help. I've only got about 30 Meg left on my PC's drive with iTunes and need to relocate my music to the server's drives.
    And if it matters, I am Administrator on both my PC and the server.
    I also tried de-authorizing my PC just in case. Made no difference.

    Thanks Katrina. Mapping the folder to a drive letter allowed iTunes to start copying the music across.
    Unfortuntely iTunes didn't notice that I manually copied the files across earlier, so it's overwriting them. I'm about two hours into the transfer with about another hour to go, but it looks like it's going to work.
      Windows XP Pro  

  • I firewired I-tunes music from crashed I-mac to a new I-mac. Then tried to sync my I-pod w/ the new computer and got messages "I-pod cannot be synced". Also, "the disc could not be read from or written to- you don't have the privilege to make changes"

    I firewired my i-tunes library from my old computer to a used I-mac which I bought. All purchased songs & playlists
    were succesfully transferred. When I tried to sync my empty I-pod to the used I-mac I received these messages.
              - I-pod cannot be synced
              - The disc could not be read from or written to
              - You dont have the priveledge to make changes.
    This is all my music legally downloaded and purchased from I-tunes. How to I circumvent this barrier?
                         Thanks, jaime

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • Failing to sync movies: "The disk could not be read from or written to."

    Hello,
    I had approx 10 movie files on my ipad which synced and played fine for the first month I had my ipad. I recently tried to add 3 more movies all in the exact same format as the previous 10, however now I get a message saying that the file could not be copied as the disk could not be read from or written to. I haven't made any major changes (that I am aware of) that would have triggered this.
    I've checked that my ipad and OS software are up to date, and tried restarting both my ipad and my comuter (a Macbook).
    I figured maybe I was out of disk space, and the capacity bar in itunes was wrong, so I removed 3 of the movies and tried to add one of the new ones - same error. I then put one of the old movies back on, and it worked fine.
    So, thinking maybe the problem could be solved by restoring my ipad, I created a backup and performed a restore. My apps and photos are safely back on the ipad - but now none of the movies will sync, all of them giving me the same error saying the disk could not be read from or written to.
    Has anybody got any idea what's going on? It's extremely frustrating as the ipad is such a good tool for watching movies on the go.
    Thanks,
    Sam

    I have run into the same problems on my iPod Classic. It seems the last couple of movies I have purchased from iTunes are the source of the problem. An interesting thing I have found is that, when purchased, the files causing the issues have saved to my internal HD, instead of the external drive that I have set as my library location.
    Another interesting thing is that this is isolated to the last 2 movies I have purchased and 1 of the last 2 rentals. Not with any music I have purchased or the other rental. So there is no consistency in it being only newest files. The only consistency is that it is movies that oddly store in the wrong location.
    I have done everything from trying to move my iTunes library location, resetting the ipod, software is up to date in everything (iPod, iTunes, Mac). I have tried disconnecting the external drive, and manually managing music and videos for the iPod sync. Everything will sync with the exception of the recent movies stored in the wrong location. Also, when trying to move the files from my internal hard drive to my external where the rest of my library lives, I get the same "...read or written to" error as I get when trying to sync to my iPod. No other files seem to be having any trouble moving around from internal to external to ipod.
    Sorry I don't have a solution yet. Hopefully this helps narrow down the problem, and save some troubleshooting time.

Maybe you are looking for

  • Forte & web.xml problem

    Hi there, I hope what I have is a simple problem to fix. I'm running Forte For Java 4 and developing a web application. When I run a servlet (although it works fine) I am getting a run-time error: ContextConfig[] Configuration error in application we

  • Decompiling the source code

    Hello, Can any one tel me how to secure my iphone application and is it possible for anyone to decompile my iphone app from app store.. Thank U..:)

  • CL_SALV_TREE & CL_SALV_HIER_SEQ in a single list display

    hi experts is it  possible to have a tree and hierarchical sequential list in a single ALV List output? Thanks Abdul Hakim

  • Top feature requests for After Effects in 2012

    Here's an article that I just posted about the top feature requests for After Effects made in 2012. Please do make sure that you submit any feature requests here. Feature requests buried in a forum thread can get lost, but feature requests made here

  • Troubleshooting for RPC over https (Outlook Anywhere) connection issue

    RPC over https (ROH), well known as Outlook Anywhere, is more frequently used. Even in Exchange 2013, Outlook no longer connects CAS server via MAPI. In this thread, we will discuss about the troubleshoot checklist about the RPC over https (Outlook A