The attempt to contact Autodiscover using the HTTP Redirect method failed. Exchange 2007 to Office 365 Cutover Mirgation

I am getting the following error message shown below. Wondering if i could get some help on how to resolve this issue.

My understanding is that the only way to resolve this issue is to install an Exchange 2010 or 2013 server in your on-premises organization and configure that as a hybrid server. Once you configure your Autodiscover record to point to the Office 365
hostname as shown in "domains", this should no longer be an issue.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

Since the last software update, I am unable to add new contacts or change existing contacts - neither if I use the green Phone app nor using the brown Contacts app. Any suggestions?

since the last software update, I am unable to add new contacts or change existing contacts - neither if I use the green Phone app nor using the brown Contacts app. Any suggestions?

*Update*
I thought I had found the offending 'app' namely "Songpop."
I regularly use "Songpop" on my phone late at night via my wifi connection.
All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
"Songpop" have now responded that "This is an issue to take up with Apple Support" see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
Hopefully someone at Apple can respond ....

Attempting to upload files using the zend _file_transfer system from cs5 training from the source. [was: Question for David Powers]

I am attempting to upload files using the zend _file_transfer system from cs5 training from the source.
On trying to upload to a remote server I am having trouble with the destination setting (C:/upload_test) in the example, please could you point me in the right direction for the an example of this setting for a remote file transfer
Also do I have to construct a connection file to activate a Ftp file transfer?
David Woolston

>I am on windows platform
Who is your host? When you checked your host path in your host control panel, what did it say?
>i have assumed (may be incorrectly) that the purpose of the exercise was to upload to a remote site (ie my website)
That is correct.
>Of course that upload might take place on a computer that does not have DW installed (an internet cafe for example)
That's irrelevant. DW is just the tool you are using to build your site. The site runs on your hosting accounts servers. This includes the php scripts you are working with.
>I have uploaded all files necessary for the operation, when i click upload it returns no such directory exits.
Do you have a url we can check? What destination are you specifying in zend code?
>This made me suspect that I would need to construct a ftp file transfer connection file to satisfied username, password , connection address etc
The exercise you are dealing with is using http file transfer. This has nothing to do with FTP. You do not need FTP for this, other than using it to move your source code from your local client to your server.

Can two users on the same Mac sync contacts by using the same Apple ID in the iCloud settings?

Can two users on the same Mac sync contacts by using the same Apple ID in the iCloud settings?

Hi Barney,
That's exactly what I want. I have a personal user and a business user on my MacBook Pro. I want both users to have the same contacts so if I add a contact while I'm logged into my personal user, it will show up when I'm logged into my business user. I want both contacts books to be exactly the same; like you said. So, I used my business user AppleID when I enabled iCloud for my personal user and I enabled iCloud for my business user with that Apple ID as well. For my personal user, I selected Contacts and Calendars to sync with iCloud. For my business user, I selected everything to sync with iCloud. The problem is... it didn't change anything. I restarted my computer to see if that would do anything but nothing happened. I'm not super savvy with Apple products, so maybe I'm completely confused.
Hi Xeni,
Thank you for your response, as well.
KEW

After upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in or

After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
Bob

On the right of the To: field you will see a circled plus sign:
Click it.

Using perl with the HTTP POST method to exchange XML with the Auth service

Has anyone written a perl script to do this yet?
I've been trying all day and keep getting "Content is not allowed in prolog.
I've used the example xml from the docs
<?xml version="1.0" encoding="UTF-8"?>
<AuthContext version="1.0">
<Request authIdentifier="0">
<NewAuthContext orgName="dc=exampleorg,dc=com">
</NewAuthContext>
</Request>
</AuthContext>
Then I read the python post at http://swforum.sun.com/jive/thread.jspa?forumID=79&threadID=22370
and the error changed to Premature end of file.
this is the portion of perl that is getting the error:
use strict;
use LWP::UserAgent;
use HTTP::Request::Common;
my $browser = LWP::UserAgent->new(agent => 'xml client');
my $greeting = <<GREETING;
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<RequestSet vers="1.0" svcid="auth" reqid="1">
     <Request>
     <![CDATA[<?xml version="1.0" encoding="UTF-8"?>
     <AuthContext version="1.0">
          <Request authIdentifier="0">
               <NewAuthContext orgName="dc=belo,dc=com">
               </NewAuthContext>
          </Request>
     </AuthContext>]]></Request>
</RequestSet>
GREETING
my $response = $browser->request(POST 'http://idpoc1.test.belo.com/amserver/authservice',
                    Content_Type => 'text/xml',
                    Content     => [xmlRequest => $greeting]
print $response->error_as_HTML unless $response->is_success;

Your problem seems to lie in the build of the request. Here you use the "sample=$data" which will invalidate the XML itself. I've tested your code changing only the build of the Request and this works fine! Given an XML like this :
<?xml version="1.0" encoding="ISO-8859-1"?>
<data>
     <txnInfo sourcePartnerCode="6" txnDate="2005.09.08"/>
     <unitOfWorkInfo sourceTicketID="SourceTicket_1" diaryEntry="Diray_1" Status="Status_OK"/>
</data>
The Server Stub should look like this :
#!/usr/bin/perl
use XML::Simple;
use Data::Dumper;
print qq{Content-type: text/xml\n\n};
if($ENV{'REQUEST_METHOD'} eq "GET"){
     $my_data = $ENV{'QUERY_STRING'};
     print "jfghdsfjghsdg$my_data";
} else {
     $data_length = $ENV{'CONTENT_LENGTH'};
     $bytes_read = read(STDIN, $my_data, $data_length);
     print "$bytes_read, $my_data";
     $xml = new XML::Simple (KeyAttr=>[]);
     print "have passed XML::Simple creation\n";
     $data = $xml->XMLin("$my_data");
     print "i want to be here \n";
     $transcode=$data->{txnInfo}->{sourcePartnerCode};
     #print "$data->{txnInfo}->{sourcePartnerCode}";
     print $transcode;
     CASE: {
          ($transcode==6) && do {
               print "i am here";
               $lstmoddat=$data->{txnInfo}->{txnDate};
               $srctktid=$data->{unitOfWorkInfo}->{sourceTicketID};
               $actvtylogdesc=$data->{unitOfWorkInfo}->{diaryEntry};
               $status=$data->{unitOfWorkInfo}->{Status};
               $command='bop_cmd -f update1.frg "upd_stats("""Administrator""","""'.$srctktid.'""","""FIP""","""what is this???""")"';
               print "$lstmoddat $srctktid $status \n";
               print "$command";
               system("$command");
               print "i am done";
               last CASE;
And the client stub should look like this :
use LWP::UserAgent;
use HTTP::Request;
use IO;
#use XML::Writer;
my $ua = LWP::UserAgent->new(env_proxy => 1, keep_alive => 1, timeout => 30, );
open INPUT, "<AcceptIncident.xml";
my @greeting = <INPUT>; #-- Read file containing XML struct to send
print "Hello World\n";
my $data_to_send; #-- And build a string of it
foreach my $newItem (@greeting) {
     $data_to_send = "$data_to_send$newItem";
print "Sending \n";
my $head = HTTP::Headers->new(Content_Type => "text/xml", "ID" => "sample");
my $req = HTTP::Request->new('POST', 'http://matrix/cgi-bin/test1.pl', $head, "$data_to_send");
my $response = $ua->request($req);
print $response->as_string; Also you should make sure you have both HTTP::Request amd XML::Simple installed, orelse this will not work.
Hope this is of some help to you.

When attempting to set up iCloud on my iMac I receive the following error message 'To use the "iCloud" preferences pane, System Preferences must quit and reopen'. I have tried quitting, re-booting etc but still receive this message. Any ideas?

When attempting to set up iCloud on my iMac I receive the following error message "To use the 'iCloud' preferences pane, System Preferences must quit and reopen."
I have tried quitting, even re-booting etc but still receive this message. Any ideas?

This is a shot in the dark, but try this:
log-in to your iCloud account with your Apple ID
change your password
ensure your billing information is up-to-date
attempt to re-enable your Keychain (again)

Frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through m

I guess I was not clear.....my fault....let me re-phrase: frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through my list of contacts and quickly select those contacts that I want to receive that particular email....thx

You need an app that allows group messaging. Enter group messenger in the search bar in the app store.

Hello everyone. I have my itunes account for some years, and i've purchased far too many apps and music. Now the company i work for, has to change my account in the iphone, in order to use the corporate mails and calendar. How can i keep my applications?

Hello everyone. I have my itunes account for some years, and i've purchased far too many apps and music. Now the company i work for, has to change my account in the iphone, in order to use the corporate mails and calendar. How can i keep my applications and music?

Read here:
http://support.apple.com/kb/ht5621
Changing your Apple ID to your current, working email address will not create another Apple ID, it will only change it to your working email address.

HT1694 Is there a way to have emails sent to both your ipad and desktop and then be able to delete them off of your ipad while having them stay on the computer? Two people use the same email account.

My parents use the same email address and both want to access all the emails that come in. My mom uses the ipad and my dad using the desktop. Recently the ipad started deleting emails off of the desktop when you deleted them off the ipad. Is there a way to get the messages deleted from the ipad to stay in the inbox on the desktop? Thanks!

Yes, that would require a POP type email account. What you describe now is the proper functioning of an IMAP type email account.
Contact your email provider to see if they can help.

HT203175 I have no problem signing on to iTunes my issue is once on the site I can not use the "search". It says there is a runtime error R6025 pure virtual function call. Has anyone had this problem and how do I fix it. Thanks

I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks

Thanks so much for your feedback. I really appreciate any input here.
If someone from Adobe could GUARANTEE that this problem would go away if I
purchased CS4, I would pony up the cash and do it. However, I'm skeptical
about that because I just saw someone else post a message on the forum today
who is running CS4 and getting the exact same runtime error as me.
I'll try un-installing and re-installing as Admin, and if that doesn't work,
maybe I can find a used copy of CS3.
In the meantime, I'm also wondering if a Photoshop file can carry any sort
of corrupt metadata inside it once it has errored out? Reason I ask is, I
had to port all of my old PSD files to the new computer, and I only seem to
be getting this error when I attempt to work on one of the files that
previously got the runtime error when they were sitting on my XP machine.
When I create new files from scratch on this new computer, they seem to be
working just fine (at least, for now).
If so, I would probably be smart to never open those troublesome
"errored-out" files again.

What are the steps to make it seamless for a customer to use the install program and then use the installed program?

I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67

This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Have a MacBook Pro with 10.8.1 and want to print wirelessly with HP 3054 610a, currently connected via USB. Router is Apple Extreme without WPS button. How do I enter the said and passphrase to the printer. Can't use the cd install-no Mtn.Lion support

Have MacBook Pro, Airport Extreme router, Mtn Lion 10.8.1 and want to print wirelessly with HP 3054 610a which was installed 2 days ago via USB. Prefer to set up the printer on the wifi network, but how do I enter ssid and passphrase. On the printer control panel only has WPS option.

You didn't look far enough .... http://www.hp.com/global/us/en/wireless/printer-setup-help.html
The next thing is to look in the manual that accompanied the printer for how to use the wireless setup wizard!
This is specific to your printer ..... http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02217452&lc=en&cc=us&dlc=en &product=5109847#N728

HT3986 I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy amac and install the OS forom the pc to the apple product i will not use the pc after can i use the OS off

I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy a macmini and install the OS from the pc to the apple product i will not use the pc after, can i use the OS off the pc or do I have to purchase another?

I think you can get Windows 7 for around $99. Install the 64bit version as the 32bit version will not be able to use all your new computer's ram if you have more than about 3.5gb.
Back up your quick books data now before the old hard drive dies. You can copy your data over to your new installation of Windows and quick books.
By the way, there is quick books for Mac http://quickbooks.intuit.com/mac/?sc=BNR-000-COR-quickbooks&priorityCode=4902000 000&cid=ppc_google_QB-Intuit-Core-Brand-Mac_quick-books-for-mac_exact&site=&ad_i d=9347918288&raw_keyword=quick%20books%20for%20mac
So you may not need to install Windows at all.

How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation bcoz of earlier files

How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help

What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
http://www.adobe.com/support/connect/connecthostedsupport.html

The attempt to contact Autodiscover using the HTTP Redirect method failed. Exchange 2007 to Office 365 Cutover Mirgation

Similar Messages

Maybe you are looking for