The attribute inserted some time in base64 and some time in clearly text

Hi to all,
i have a problem with insert attributes in my ldap.
The attribute are defined in this way:
attributeTypes: ( spadaId-oid NAME 'spadaId' SYNTAX
1.3.6.1.4.1.1466.115.121.1.
15 SINGLE-VALUE X-ORIGIN 'user defined' )
But if i exec many add, the same attribute, are
inserted some time encoded in base64, and some time
in clearly text.
Can you help me?
I know that my english is far from being perfect, but
I hope that you understood the problem
ThanksIf you are viewing the attribute value in LDIF format then values which are in non-ascii format ("SAFE-UTF8-CHAR", as per the RFC) will be in base64 encoded (refer RFC 2849 )
-------- RFC 2849 Note-------
4) Any dn or rdn that contains characters other than those
defined as "SAFE-UTF8-CHAR", or begins with a character other
than those defined as "SAFE-INIT-UTF8-CHAR", above, MUST be
base-64 encoded. Other values MAY be base-64 encoded. Any
value that contains characters other than those defined as
"SAFE-CHAR", or begins with a character other than those
defined as "SAFE-INIT-CHAR", above, MUST be base-64 encoded.
Other values MAY be base-64 encoded.
8) Values or distinguished names that end with SPACE SHOULD be
base-64 encoded.
Regards
Randip Malakar

Similar Messages

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

Why cant i download all of the itunes songs off my wifes purchased itunes account when using the family sharing? some songs i can and some it wont let me

why cant i download all of the itunes songs off my wifes purchased itunes account when using the family sharing? some songs i can and some it wont let me

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I converted some songs in iTunes to work with an eMusic device. I'd like to delete them, but I'm not sure which of the duplicated songs to delete. Some titles are black and some are gray.

I converted some songs in iTunes to work with an eMusic device. I'd like to delete them, but I'm not sure which of the duplicated songs to delete. Some titles are black and some are gray.

let's just doublecheck some things quickly. do any of the affected songs play in itunes at the moment? if so, when you play them, do they ask to be authorised?
if so, does the authorisation go through successfully, or do you get an error message? (if you get an error message, let us know what it says. include error message numbers if you're getting any.)
if the authorisation seems to go through successfully, with the authorised songs sync to the ipod?

I hope you can help me. I purchased adobe captivate 8 on line and when I click on the email link to download, it comes up with 7 programs, some are 64 bit and some are not, my computer is 32 bit. I am not sure which of these 7 to download? All or just

I hope you can help me. I purchased adobe captivate 8 on line and when I click on the email link to download, it comes up with 7 programs, some are 64 bit and some are not, my computer is 32 bit. I am not sure which of these 7 to download? All or just the 4 non 64 bit?

I tracked down the problem with the download and installation, my windows 7 was missing a file and after reinstalling windows everything worked out. The first 32 bit program in their list was used. I hope this can help others.

I have an ipod and and ipad. I want different things on each one. How do I set it up to only sync some things on one and some on the other?

I have an ipod and and ipad. I don't need as many apps on my ipod touch as I have on my ipad. How do I set it up to only sync some things on one and some on the other?

How you sync one device will not affect the other. See here for different ways to manage them all.
How to use multiple iPods, iPads, or iPhones with one computer
B-rock

When i open firefox it runs in background but does not open. if i disable the internet connection immediately it opens. each and every time i do this when i start work. what kind of problem is this

i am using windows xp profession sp3 os
when i open firefox it runs in background but does not open(see through task manager or one message "firefox is already running in background" when i again click the icon.)
if i disable the internet connection, immediately it opens. each and every time i do this when i start work. what kind of problem is this
== This happened ==
Every time Firefox opened
== i every time starts firefox

I had the same problem and it was because of my firewall settings, which I had set to block all activity and forgot to reset it.

Hello, my little sister just spilled french vanilla on my mac and i cleaned it and turned it off , but at random time it opens and some keys arent working what do i do ?

Hello, my little sister just spilled french vanilla on my mac and i cleaned it and turned it off , but at random time it opens and some keys arent working what do i do ?

Take it to an Apple Store, you can't do anything yourself.

HT2486 some of the emails i have written send immediately and some are sitting in outbox how do i get them to send please?

some emails send immediately and some sit in my outbox how can i get them to send please?

Hello Jo Pru
Check out the article below to troubleshoot issues with sending email from Mail for Mac. Check in Connection Doctor to see if there is anything that could be preventing from sending it out. Also look to see if how big the email is as that could be an issue with the message sending out.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Regards,
-Norm G.

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Part Time, Contract Based, and Full Time Positions available for LabVIEW Developers

Mindready (www.mindready.com) is looking for flexible, hard working individuals to fill part time, contract based, and full-time/permanent jobs in LabVIEW development positions. We have immediate needs for contract labor in Dallas, TX; NY; Huntsville, AL and Austin, TX, as well as other locations. US Citizen and Security Clearance required on some projects. Mindready is a certified National Instruments Alliance Partner with facilities in Montreal, Austin, TX and (Radical Systems, Inc. – a mindready company) Huntsville, AL (www.radicalsystems.com).
The duties of the positions include:
• On and off-site LabVIEW development work. May involve TestStand, instrumentation such as PXI and stand alone instruments, DAQ, Motion, Vision, etc.)
• Willingness to travel for periods as short as 2-3 days, to as long as 6 months. (Ideal candidate would be local to any long assignment)
• Integrate into customer’s development team to design and modify new/existing LabVIEW applications.
The ideal candidate would possess the following skills & qualifications:
• Intermediate-to-advanced knowledge of LabVIEW (a pre-employment test is required)
• Broad technical knowledge is a plus, we serve a wide range of application areas
• Excellent writing, communication (English), time-management, and interpersonal skills.
• Ability to travel for on-site work at customer facilities for jobs as short as 1 week, possibly as long as 6 months.
• Discipline and organization with respect to software development and maintenance.
• Engineering, Technical or Computer Science degree or appropriate experience
• Certification is not required but would be beneficial
Pay is commensurate with skills and qualifications of the applicant. Compensation will include a competitive hourly rate.

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

I have transferred my iTunes library from windows 7 pc to new windows 8 pc. Music was in alphabetical order by surname but new pc has some by surname some by first name and some not in alphabetical order. How can I get sorted?

Question Hi - I've transferred my iTunes library from windows 7 pc to one with windows 8. My library was in alphabetical order by surname but after transfer is now some by surname, some by first name, and some not in alphabetical order. How do I sort this out and also make sure that new downloads list by surname alphabetically?

Sorting in iTunes is often controlled by selecting different column headings. The sort order for any given column may be further modified by a sort value, e.g. Sort Artist affects the sort order of Artist. If you transferred the library properly all of the metadata should have remained intract and you simply need to select the a column that sorts as you want. If you had to import the library then there is the potential for tagging effects that could mean metadata entered previously didn't import with the media. Note that iTunes has no mechanism for automatically deciding which values are in <Forename> <Surname> order and could therefore be sorted as <Surname> <Forename>. The only automatic process drops leading articles (a/an/the) so that "The Doors" sort under D as "Doors".
See also Grouping tracks into albums.
tt2

Is there a way I can have my form calculate a total time from beginning and ending time?

Is there a way I can have my form calculate a total time from beginning and ending time?

Sorry, but Formscentral doesn't support either a timer function or any kind of calculation. You might be able to do this if created your form in PDF. For help with PDF form creation in Acrobat I suggest you repost your question to the Acrobat Forum.
Andrew

MacBook Pro screen glitches out, gray lines appear on it then my computer freezes and must be restarted sometimes it will beep 3 times when restarting and other times it won't. Is this a virus?

I have a MacBook Pro running mavericks. Sometimes the screen glitches out, gray lines appear on it then my computer freezes and must be restarted sometimes it will beep 3 times when restarting and other times it won't. Is this a virus, software issue, water damage, etc? An error message usually appears after being restarted. It does it all the time please help.

No Virus. You have a Hardware Problem. 3 Beeps means a RAM problem. You could try Reseating the RAM is its sockets.
But that wouldn't necessarily cause the screen to Glitch Out, as you say.

Hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

Hi
It may be virus, please reset all IE settings and try antivirus and scan your PC. Before that esure that other PC connected to the same internet is able to access the Site which will let you know if this is issues with ISP or not

The attribute inserted some time in base64 and some time in clearly text

Similar Messages

Maybe you are looking for