The audio on my hp pavilion dv6-6b27nr no longer works
The troubleshooter did not find a problem. I re-installed the driver. Suggestions?
Hi,
Try the following.
Download the relevant IDT Audio installer on the links below and save it to your Downloads folder.
IDT Audio Installer - Windows 7.
IDT Audio Installer - Windows 8.
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
My laptop ( hp pavilion dv6-6b27nr entertainment PC) willl not start up. the screen is blank.
I have a HP Pavilion dv6-6b27nr Entertainment PC (Win 7) It would start up with the message "BIOS RECOVERY" . It then would not start up at all. I took it to a repair shop, they contacted HP and got it working. i took it home and it worked just fine the same day, however when I tried to use it the next day the screen is just blank. i tried the take out the battery process with no effect. i then tried tapping the f11 key at start up. the fan came on and it made some noise, but has failed to show anything on the screen. When I turn it on the caps lock key blinks continually in a sequence of two blinks. (When i brought it home from the repair shop I downloaded malwarebytes and quarantined 87 pups etc. )
HI @owe ,
Thank you for your query, I will do my best to help!
I grasp that you received a bios error and the notebook would not start. You took it to a repair shop, who contacted HP and got it back up and running. When you took it home it ran fine. You downloaded malwarebytes, installed and ran it, and quarantined 87 pups etc. When you tried to use it the next day you get a blank screen and the lights blink twice.
Here is a link to Computer does not start and the LEDs blink or the computer beeps . Two blinks again refers to the bios.
You should not be having a bios problem so soon after just having it repaired.
There may be a hardware issue that is causing this and I would test the hardware rule that possibility out. Testing for Hardware Failures (Windows 7, Vista)
If you are still unable to determine any problems, you would have some options.
You can try to restore the bios yourself. Restoring the BIOS
As you just got it back from the repair shop, you could take it back to them to see what they say.
As you stated that the repair shop called HP, you may be able to acquire a reference or case number to refer to and call them yourself. Just to clarify you do not need the case number to contact HP support but it would allow them to more easily locate any case notes from the previous call.
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Hi,
I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on.
But I zoom in、the waveform was not ended at Zero point.
Why?
In the audio file editork, "Snap Edits to Zero Crossings" option works fine.correction needs to be made to step #14, I typed:
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
Another Correction:
Originally read:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW. -
The Audio playback device HDA Intel (ALC268 Analog) doesn't work.
Every time I login to KDE through KDM, the notification gives me this message: "The Audio playback device HDA Intel (ALC268 Analog) doesn't work. Falling back to default"
Everytime I try to play an audio file, the notification gives me the same message.
But everything else such as system sound, online video work.
What can I do to make it work?
thank you for your helpI have the same problem under the same conditions the original poster described. However, under System Settings -> Multimedia -> Device Preference I don't have default as device listed. The devices I can pick are:
-Esound (ESD)
-HDA Intel (STAC92xx Analog)
-HDA Intel, NVIDIA HDMI (HDMI Audio Output)
-Jack Audio COnnection Kit.
I can also pick HDA Intel (NVIDIA HDMI) when I check 'Show advanced devices'
When I use Esound I have sound for a while, until after a random time it falls back to the underlying device, which makes sound disappear. When I use HDA Intel (STAC92xx Analog), it falls back immediately on logging in and the other choices do never fall back, but when I use them, I have no sound at all. After I loose sound when Esound falls back to another device, sometimes writing sudo /etc/rc.d/alsa restart gives sound back, but mostly I need to relog/restart the X-Server to get sound back.
Is my issue related to the original poster his problem? And how can I fix it? -
Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
I have downloaded the most recent version of Iphoto and it no longer works period. I lost all photos, and the app crashes every time I try to open it. How can this be fixed?
Post the first 50 lines only of the crash report
Regards
TD -
I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???
What "locking function" are you talking about?
-
Since last update on Mavericks, the picture attachement to a movie in iTunes no longer works. Any idea ?
Picture added is not displayed in the finder ; when transfering the movie to an Ipad, it is not displayed either.
iMac 27', Mavericks 10.9 + iTunes 11.1.2Working here just fine. Try reinstalling:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My hard-drive crashed, I own Lightroom 5, where can I download it again t re install it. The ADOBE email I had has links that no longer work (thanks for that). Running Windows 7 Home Premium
Hello Andrea,
did you try this: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=DT EML
What concerns your eMail you should talk to Adobe, please have a look there: http://helpx.adobe.com/de/contact.html by clicking throug their questions and if "open" please use chat, I had the best experiences.
Hans-Günter -
I have an old iPod Classic with 80 GB (I think) of space. I saved all my songs in an external hard drive, but the iTunes library resided in an old computer (no longer working). Can I get the library from my iPod and use it in my new computer (Windows)?
You might want to check your process for moving your iTunes music against this: http://support.apple.com/kb/HT4527.
-
I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest
Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.
-
Is this the most up to date article on up-dating the iPhone OS - is there anything about the problems relating to the up-date to OS 6 - my G3 no longer works and Apple seems to have gone to ground. No Genius bar appointments available for a week!
iOS 7 devices need iTunes 11.1 or newer to sync. Depending upon your computer and the OS it is running, you may not be able to upgrade to iTunes 11.1 based on the requirements for iTunes 11.1. What computer and OS are you running your iTunes on? From the iTunes download pages I see the requiorements are:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store -
The link to our Public iTunesU site is no longer working
The link to get access to the Public side of our iTunesU site is no longer working. We have tried from both Windows machines and Macs, with multiple browsers and they all the do the same thing. When you click the link, iTunes looks like it is opening the page, but then just stops.
Has something changed in the formatting of the link to a public iTunesU site? Here is our link:
https://deimos.apple.com/WebObjects/Core.woa/Browsev2/utm.eduUse the Deauthorize All command documented in this article.
(102522) -
Photoshop Elements 13, the iTunes "Sync Photos from Photoshop Elements" feature no longer works
Photoshop Elements 13, the iTunes "Sync Photos from Photoshop Elements" feature no longer works??? Is had worked with photoshop 9 pretty good? how can I enable this feature?
thx. franciscoI am experiencing the same problem after upgrading to PSE13, but haven't found a solution yet.
TomWoodbridge proposes a workaround, see Re: iTunes Photo Sync with PhotoShop Elements Fails after PSE Update
Another permanent workaround (which doesn't require to copy the pse database every time you want to sync) is described here: Elements 13: Cannot synchronise photo albums in iTunes after upgrading from Elements 11
Hope this helps. -
The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.
Hello there, Teworsham90.
The following Knowledge Base article reviews the process of adding artwork to content in your iTunes Library:
iTunes: How to add artwork to songs and videos in your library
http://support.apple.com/kb/HT1409
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.
Maybe you are looking for
-
Update values in AlV grid display after entering value
Hi, I have an issue in ALV grid display. Let me explain. i have 8 fields to display in which one is editiable. Fields are: date material, material Description, Opening Stock,
-
Creative cloud says my sync is turned off. I resume syncing and comes up with a Server error. I select more detail and I show all green arrows. First of all why does it says it's tuned off because I never turn it off in just about a year now and seco
-
Where i can find update for graphic drivers?
HI, I have HP PAVILION 15-e039tx Notebook pc in which there is Radeon HD 8670m 2gb DDR3 dedicated graphics and intel hd graphics 4000. So can you please help me where to updates for these drivers?
-
Adobe 10 Will Not Update, Vista SP2
Adobe 10 will not function. I've spent days going through support recommendations. I've performed all fixes more than once. I've started and restarted. I've checked and rechecked settings. I've turned off protection programs. I've performed manual do
-
Can I open any remote file through FTP from eclipse , I have tried a lot of google but havent found any thing necessary, please help me out, to achieve this...as if now I am using edit plus for loading or updating any file and doing work ..