The Audio playback device HDA Intel (ALC268 Analog) doesn't work.
Every time I login to KDE through KDM, the notification gives me this message: "The Audio playback device HDA Intel (ALC268 Analog) doesn't work. Falling back to default"
Everytime I try to play an audio file, the notification gives me the same message.
But everything else such as system sound, online video work.
What can I do to make it work?
thank you for your help
I have the same problem under the same conditions the original poster described. However, under System Settings -> Multimedia -> Device Preference I don't have default as device listed. The devices I can pick are:
-Esound (ESD)
-HDA Intel (STAC92xx Analog)
-HDA Intel, NVIDIA HDMI (HDMI Audio Output)
-Jack Audio COnnection Kit.
I can also pick HDA Intel (NVIDIA HDMI) when I check 'Show advanced devices'
When I use Esound I have sound for a while, until after a random time it falls back to the underlying device, which makes sound disappear. When I use HDA Intel (STAC92xx Analog), it falls back immediately on logging in and the other choices do never fall back, but when I use them, I have no sound at all. After I loose sound when Esound falls back to another device, sometimes writing sudo /etc/rc.d/alsa restart gives sound back, but mostly I need to relog/restart the X-Server to get sound back.
Is my issue related to the original poster his problem? And how can I fix it?
Similar Messages
-
[SOLVED]How to set default audio playback device?
I have an X-fi forte soundcard that doesn't work on linux, so I'm just gonna use the onboard realtek chip, but I get no sound from that either unless I physically remove the X-fi card.
I use the X-fi when I boot into windows though, so I'd like to keep it...
How do I change the default playback device?
I didn't find anything that worked in the wiki or with google.
Last edited by raginaot (2010-12-05 04:30:21)oh wait... I just spotted this in the wiki guide, a little too late
NB: Some modules do not support indexing options eg. snd-hda-intel. If you experience problems on reboot edit /etc/modprobe.d/modprobe.conf to just have the modules.
what does that mean "edit /etc/modprobe.d/modprobe.conf to just have the modules.".... what modules? :S
should I just remove "index=0" from the line?
Edit: yes I should. It's working
Thx man
Last edited by raginaot (2010-12-05 04:29:52) -
I'm downloading using RealPlayer But the video playback is jerky. The audio playback is OK.
Please can anyone suggest a solution.
PS Would upgrading to RealPlayer Plus help?I can't understand how internet speeds can be the cause of the problem. My problem with a jerky playback is that I have already down loaded. Could this be to do with my computer (I maybe able to persuade my wife that I need a new one). Earlier I was listening to a clip of the MJQ, downloaded from UTube, and although the sound was good the picture was not.
My computer is an iMac with an Intel Core 2 Duo with a processing speed of 2.8 Ghz. Does this information help? -
Multiple audio playback devices
I have just built a system using the K7N2-L mainboard and am having a problem with multiple audio playback devices.
Actually I have TWO problems, which are probably unrelated.
I have a 5.1 speaker system connected to the onboard audio and an external USB DAC for playback through a hi-fi system.
The first problem is that the USB audio device is only recognised if it's plugged in after the system is booted. If it's already attached when I power up, it appears not to be properly installed.
The second problem is that when I use the Sounds and Multimedia control panel to switch audio devices (Windows 2000 pro) playback continues through whichever device was used first. In order to switch, I have to reboot the computer.
Another system I built using an Epox nforce board does not have this second problem, although it does have the first. With the Epox board, I can even play through both devices simultaneously.I gathered this from the handbrake side of things:
You can also combine Pro Logic II and AC3 pass-through. This will give you a file that will play anywhere from QuickTime to VLC to the iPhone (using the AAC Pro Logic II track) and play in true surround sound on an AppleTV or in Perian. It is the best of both worlds, and it is only possible in the .mp4 and .mkv containers. Again, MP4 file names must, confusingly, end in .m4v for QuickTimeto read them. To use this hybrid format, in the Audio tab, set the first audio track to be the track you want, in AAC sound. Then set the second track to also use the same source track, and select AC3 pass-through."
I think this is what will ultimately help me. I will let you know.
the answer was righ under my nose.
Thank you! -
Need help getting current/default audio playback device from VISTA
Hello,
I need to get the current audio playback device in VISTA.
It's easy enough in XP as I just get this information from the
registry. My understanding is that things are different under
VISTA. I was told you can't change the device but you can get the
device using the following...
--CoCreateInstance(IMMDeviceEnumerator)
--IMMDeviceEnumerator->GetDefaultAudioEndpoint(eConsole)
Problem is I don't know what to do with that. I assume it
needs to be compiled with some library (compiler, library, etc... I
don't have)
So... question, is there already an xtra that can get this
information OR... can I pay someone to make an xtra using the above
info?
If you are able/willing to help, please let me know asap as
project is due next week. I can pay you through paypal.
Thank you!!!!!
[email protected]http://www.schmittmachine.com/asPitchDetect.html
Antoine Schmitt at that url builds Xtras and his
asPitchDetect Xtra can get info on recording devices... try
contacting him and he might be able to help you with a custom Xtra
to get info on playback devices in Vista. -
I have a problem with the audio playback .
I have a problem with the audio playback .
I have two animations structurally identical.
If I view with safari okay, if I see with chorme for mac the first works, the second the audio does not start by itself, but only when I pause the animation ! !
Where am I wrong?
Here's the file.
https://www.dropbox.com/s/5ec8pwfcss1isoh/test01.zip?dl=0Need you to share the Edge composition file whose animation has the issue.
-
I wonder if I can get the lyrics (lyrics) are scrolled on the screen, as most lyrics is very large, and can almost never get the entire text box. is possible to make each verse appears, while the audio playback? please help me???
Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?
Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom? -
When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?
Try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Hi,
I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on.
But I zoom in、the waveform was not ended at Zero point.
Why?
In the audio file editork, "Snap Edits to Zero Crossings" option works fine.correction needs to be made to step #14, I typed:
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
Another Correction:
Originally read:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW. -
I want to know how much would it cost me to change the plug of my 4S headphones because it doesn't work and do you take old devices and give me a new one?
No. That's not what I said. You can get an out of warranty replacement, which will be exactly the same model, color, and will be locked in exactly the same way the original is. If you want an iPhone 5, get the 4S replaced, sell it, and use the money to put toward a new phone.
-
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
The speed key of imovie 10.0.5 doesn't work at all
the speed key of imovie 10.0.5 doesn't work at all
Have you enabled it on the iPhone/iPod Touch and iTunes
Once you have done this you need to ensure they are on the same WIFI network, If you have less than 50% power on the device then plug it into the mains.
You can then force the first sync in the settings>general>iTunes Wi-Fi Sync menu
lt me know if you get anywhere -
I lost an Iphone 5 and got a new one on the next day by mail but it still doesn't work, what I need to do to activate the phone?
Let's ensure we get this new device up and running, 123Vika. I know the importance of having a functional device. I have some great news you can activate the device directly from My Verizon. Take a look; http://vz.to/1gdvahs
YosefT_VZW
Follow us on Twitter @VZWSupport -
Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.
you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html
Maybe you are looking for
-
Problem with Adobe reader plug in for Mac Firefox12 - is remedy forthcoming?
Current plug in for Mac FF12 is not working according to Adobe. Plug in works fine with Safari. When is remedy likely? This is quite an inconvenience.
-
Error on Photoshop Cs4 trial "GLU32.dll" not valid windows image???
can some help me to try this trial there is error that i encounter.
-
My iphone 4s keeps saying to many files open when i try download an app
when i try update my apps its saying to many files open but i have no open files!
-
I would like to know if there is a way to do pass a parameter p_Parameter having a value of say A1, A2,A3,....An for a query in PL/SQL stored procedure for a query such as : Select * From Employee where EmpId in (p_Parameter) I was able to resolve th
-
REASON OF REJECTION AT SALES ORDER ITEM LEVEL
In sales order item level after putting reason of rejection wether net value of sales order changed to ZERO Value? In Sales infromation system for that particular customer & material sales order value reflects in report? Kindly send your comments on